A general criterion for jump resonance of nonlinear control systems

A new criterion for jump resonance of nonlinear control systems is presented. The jump resonance phenomenon is classified into various types according to the form of the frequency response curve, some of which are new and not found in the previous publications. A simple graphical method to predict each type of jump resonance is studied. Experimental results by analog simulation are shown.     

An adaptive antenna array under directional constraint

The concept of the adaptive system working on the principle of minimizing the output power under the constrained response to specified directions is introduced. Theoretical analysis and computer simulation experiments on this directional constraint system are also presented. By comparison with the computer experiment, the differential equation approach is shown to be useful to predict the behavior of the system. The effect of error in setting the constraint direction is investigated, and it is demonstrated that the system is not very sensitive to such error. This margin can be made even greater by adopting the double directional constraints system. This system is also analyzed theoretically and experimented by computer simulation. History of output power components during adaptation is shown, which enables the comprehension of the behavior of the system.     

Wafer-Level Integration Technique of Surface Mount Devices on a Si-Wafer With Vibration Energy and Gravity Force

This paper reports about a novel wafer-level integration technique of discrete surface mount devices (SMDs). It enables wafer-level mounting of plural kinds of SMDs on a silicon (Si)-wafer using vibration and gravity force. Deep holes with 400-m depth are formed on the surface of a Si-wafer by deep reactive ion etching process after general integrated circuit process for positioning of SMDs. A non-conductive adhesive (CYTOP) are coated on the deep holes and it is used to fix the aligned SMDs. SMDs are distributed on a Si-wafer mounted on vibration generator, and then a vibration is applied. The SMDs migrate due to the reduced friction between the wafer surface, and they drop into the holes on the silicon wafer. The size of the holes has an appropriate clearance to the size of SMD. In order to align two or more kinds of SMDs, sizes of the deep holes on a Si-wafer are adjusted to the size of each SMD. SMDs with the largest size are dropped into the holes first, and then the secondary large SMDs are dropped into the holes with the corresponding size. SMDs are finally connected electrically by wire bonding at the final step. In the experiment, two different sizes of SMD were successfully mounted into all the holes on a Si-wafer automatically. This technology will be a wafer-level process technology which is very promising to integrate two or more kinds of discrete elements.     

Performance Improvement of Current Source Inverter-Fed Induction Motor Drives

A high performance variable speed drive system using current source inverter fed induction motor is described. The principle of the drive control is based on the field-orientation method, where the stator current is used as the vector quantity. To improve the system response and to operate smoothly at low speed, a current pulsewidth modulation (PWM) control is provided by means of a feedback loop. This system operates stably and shows a high dynamic performance in a wide range, from zero to rated speed. Dual current source inverter is applied to this drive system which results in a remarkably low copper loss of the motor, even in PWM operation.     

Characterisation of optically driven microstructures for manipulating single DNA molecules under a fluorescence microscope

Optical tweezers are powerful tools for manipulating single DNA molecules using fluorescence microscopy, particularly in nanotechnology‐based DNA analysis. We previously proposed a manipulation technique using microstructures driven by optical tweezers that allows the handling of single giant DNA molecules of millimetre length that cannot be manipulated by conventional techniques. To further develop this technique, the authors characterised the microstructures quantitatively from the view point of fabrication and efficiency of DNA manipulation under a fluorescence microscope. The success rate and precision of the fabrications were evaluated. The results indicate that the microstructures are obtained in an aqueous solution with a precision ∼50 nm at concentrations in the order of 10⁶ particles/ml. The visibility of these microstructures under a fluorescence microscope was also characterised, along with the elucidation of the fabrication parameters needed to fine tune visibility. Manipulating yeast chromosomal DNA molecules with the microstructures illustrated the relationship between the efficiency of manipulation and the geometrical shape of the microstructure. This report provides the guidelines for designing microstructures used in single DNA molecule analysis based on on‐site DNA manipulation, and is expected to broaden the applications of this technique in the future.Inspec keywords: DNA, molecular biophysics, fluorescence, optical microscopy, radiation pressure, biological techniquesOther keywords: optically driven microstructures, single DNA molecule analysis, fluorescence microscopy, optical tweezers, nanotechnology‐based DNA analysis, manipulation technique, aqueous solution, fine tune visibility, yeast chromosomal DNA molecules, geometrical shape, on‐site DNA manipulation     

Hypomagnesemia as a predictor of mortality in hemodialysis patients and the role of proton pump inhibitors: A cross‐sectional, 1‐year,retrospective cohort study

Introduction This study aimed to evaluate the association between proton pump inhibitor (PPI) use and serum magnesium levels, and the role of hypomagnesemia and PPI use as a risk factor for mortality in hemodialysis patients. Methods An observational study, including a cross‐sectional and 1‐year retrospective cohort study. The study comprised 399 hemodialysis patients at a single center, and was conducted from January to September 2014. Multiple linear regression analysis was used to investigate the independent relationship between serum magnesium levels and baseline demographic and clinical variables, including PPI and histamine‐2 receptor antagonist use. Cox regression model was used to identify lower serum magnesium level and PPI as a predictor of 1‐year mortality. Findings Serum magnesium levels were lower with PPI use than non‐PPI use (2.39 ± 0.36 vs. 2.56 ± 0.39 mg/dL, P < 0.001). Multiple linear regression analysis showed that PPI use, low serum albumin levels, and low serum potassium and high‐sensitivity C‐reactive protein (hs‐CRP) levels were significantly associated with low serum magnesium levels. A total of 29 deaths occurred during the follow‐up period. According to Cox regression analysis stratified by hs‐CRP, only high serum hs‐CRP levels (>4.04 mg/L) in association with low serum magnesium levels was an independent risk factor for 1‐year mortality (hazard ratio: 2.92; 95% CI: 1.53–6.40, P < 0.001). Discussion Serum magnesium levels are lower in PPI use. In the inflammatory state, a low serum magnesium level is a significant predictor of mortality in hemodialysis patients.     

A new family of heparin-binding growth/differentiation factors: increased midkine expression in Wilms' tumor and other human carcinomas

Midkine (MK) and heparin-binding growth-associated molecule/pleiotrophin form a new family of heparin-binding growth/differentiation factors. We studied MK gene expression in human tumors. In normal human reference tissues, MK was highly expressed in the mucosal tissue of the small intestine, moderately in the thyroid, weakly in the tissues of the lung, colon, stomach, kidney, and spleen, and not at all in the liver. All of 6 surgically removed specimens of Wilms' tumor highly expressed MK. Also, a moderate to intense level of MK expression was noted in the majority of surgically removed hepatocellular carcinomas. The MK mRNA level was analyzed in a number of cultured and nude mice-transplanted lines of human tumors. In stomach, colon, pancreatic, lung, and esophageal carcinomas, a moderate to high level of MK expression was found in the majority of them. These results suggest an important role of MK in the development and/or biological behavior of tumors and raised a possibility to use MK as a diagnostic marker. Heparin-binding growth associated molecule/pleiotrophin mRNA was low or scarcely detectable in samples analyzed thus far except for significant levels of the expression that were observed in PA-1 teratocarcinoma cells and in some surgical specimens of Wilms' tumor.     

Anode‐voltage‐control circuit for compensation of luminance deterioration

Abstract— An external driving circuit that has realized long lifetime, power‐consumption control, and peak luminance for organic light‐emitting diode (OLED) displays have been developed. This circuit realizes an effective method for constant‐anode‐voltage (CV) driving refered to as clamped inverter (CI) driving. The feature of CV driving is to achieve low‐power consumption compared with constant‐anode‐current (CC) driving and to control the power consumption and peak luminance according to the image because display luminance can be easily changed by controlling the anode voltage. On the other hand, CV driving has the problem that luminance deterioration appears to be serious compared with that of CC driving because the current of the OLED element decreases according to usage time. To cope with this, a lifetime compensation circuit that has increased the anode voltage so that it compensates for the luminance deterioration has been developed. This circuit can compensate not only the decrease in current but also the decrease in luminance at a constant current that CC driving cannot. However, increasing the anode voltage causes an increase in stress on the OLED element. The influence of stress on OLED lifetime was verified. As a result, it was confirmed that this circuit can extend the lifetime by 32% even if the anode voltage is increased, causing stress on the OLED structure.     

Graded‐index plastic optical fiber with high mechanical properties enabling easy network installations. I

A doped poly(methyl methacrylate) (PMMA)–based graded‐index plastic optical fiber (GI POF) with high mechanical strength is reported for the first time. Although the POF is generally believed to have a good mechanical flexibility even if it has a large‐core diameter, such a high mechanical strength has been provided by making the polymer chains in the POF highly oriented in its axial direction. If such an orientation of polymer chains is eliminated, the POF becomes brittle, which is similar to silica‐based fibers. On the other hand, too high an orientation of the polymer chains induces fiber deformation in a high‐temperature atmosphere resulting from orientation relaxation. This study reports how high mechanical strengths such as the tensile strength and the large elongation are provided to the GI POF. By selecting the optimum heat‐drawing conditions, the GI POF has a mechanical strength comparable to that of the commercially available step index (SI) POF. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 404–409, 2004