The structure of acetylene flames for diamond synthesis

An acetylene flame was photographed with an SIT camera through optical filters, and the signals were Abel transformed to obtain two-dimensional emission-intensity profiles. It was found that the intensive emissions of CH* and C*₂ are localized at the feather boundary, while the OH* emission is localized at the intermediate zone. The structure of the acetylene flame was made clear: it consists of a carbon-radical-rich feather and an oxygen-radical-rich intermediate zone. The carbon-radical concentrations are approximately in equilibrium near the burner exit while they decrease almost linearly via interdiffusion and reactions with the oxygen-radicals in the intermediate zone.Numerical simulations including detailed gaseous and surface reactions reproduced well previous preliminary calculations showing that CH₄ is rapidly produced in the boundary layer near the substrate followed by an increase in CH₃. This result satisfactorily explains the measured dependence of growth rate on the substrate temperature and ratio.     

Effects of amino acid replacements around the reactive site of chicken ovomucoid domain 3 on the inhibitory activity toward chymotrypsin and trypsin

We have previously shown that replacing the P1-site residue(Ala) of chicken ovomucoid domain 3 (OMCHI3) with a Met or Lysresults in the acquisition of inhibitory activity toward chymotrypsinor trypsin, respectively. However, the inhibitory activitiesthus induced are not strong. In the present study, we introducedadditional amino acid replacements around the reactive siteto try to make the P1-site mutants more effective inhibitorsof chymotrypsin or trypsin. The amino acid replacement AspTyrat the P2' site of OMCHI3(P1Met) resulted in conversion to a35000-fold more effective inhibitor of chymotrypsin with aninhibitor constant (K_i) of 1.17x10^–11 M. The K_i valueof OMCHI3(P1Met, P2'Ala) indicated that the effect on the interactionwith chymotrypsin of removing a negative charge from the P2'site was greater than that of introducing an aromatic ring.Similarly, enhanced inhibition of trypsin was observed whenthe AspTyr replacement was introduced into the P2' site of OMCHI3(P1Lys).Two additional replacements, AspAla at the P4 site and ArgAlaat the P3' site, made the mutant a more effective inhibitorof trypsin with a K_i value of 1.44x10^–9 M. By contrast,ArgAla replacement at the P3' site of OMCHI3(P1Met, P2'Tyr)resulted in a greatly reduced inhibition of chymotrypsin, andAspAla replacement at the P4 site produced only a small changewhen compared with a natural variant of OMCHI3. These resultsclearly indicate that not only the P1-site residue but alsothe characteristics, particularly the electrostatic properties,of the amino acid residues around the reactive site of the proteaseinhibitor determine the strength of its interactions with proteases.Furthermore, amino acids with different characteristics arerequired around the reactive site for strong inhibition of chymotrypsinand trypsin.     

Reaction products of α-tocopherol with methyl linoleate-peroxyl radicals

α-Tocopherol was reacted with methyl linoleateperoxyl radicals at 37°C. The peroxyl radicals were generated by the reaction of methyl linoleate with a free radical initiator, 2,2′-azobis(2,4-dimethylvaleronitrile). The primary products of α-tocopherol with methyl linoleate-peroxyl radicals were isolated by reversephase and normal-phase high performance liquid chromatography (HPLC), and their structures were characterized by ultraviolet (UV), infrared (IR),¹H and¹³C nuclear magnetic resonance (NMR) and mass spectrometry (MS). There were four stereoisomers of methyl 13-(8a-peroxy-α-tocopherone)-9(Z),11(E)-octadecadienoate and four stereoisomers of methyl9-(8a-peroxy-α-tocopherone)-10(E),12(Z)-octadecadienoate.     

Crosslinked acrylic pressure sensitive adhesives. 3. Effect of adherend on film formation

The reaction of isocyanate in pressure sensitive adhesive (PSA) films adhered on to various adherends having different surface tensions was monitored by depth profiling using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy.In the latter stages of crosslinking reaction, unreacted isocyanate and its derivatives exist more in the bulk of the PSA than in the interfaces between PSA and adherends which are Teflon sheet and PE film having relatively lower surface tensions. In the case of using stainless steel having relatively higher surface tension as adherend, opposite segregation was observed compared to Teflon and PE.From X-ray photoelectron spectroscopy (XPS), it was revealed that N atoms exist more in surface than in bulk when stainless steel is used as adherend. We conclude that polyisocyanates migrate in the PSA film in order to minimize the magnitude of interfacial free energy between the PSA and the adherend, which leads to the change of surface tension of PSA film.     

Activity measurement of gallium in the B2 phase of the CoGa–Sb system by the EMF method with zirconia-based solid electrolyte

Gallium activity in the B2 phase regions of both binary Co–Ga and ternary Co–Ga–Sb systems was measured by EMF method with stabilized zirconia solid electrolyte The temperature range was 1073–1273 K and Sb concentrations were 1, 2 and 3 mol fractions. Ga activity at 1173 and 1273 K increases sharply in Ga rich region and the addition of Sb to the CoGa phase increases Ga activity. Activity change corresponds to the lattice parameter change with Sb addition to the CoGa phase.     

Polytetrafluoroethylene processing characteristics using high-energy X-ray

Polytetrafluoroethylene (PTFE) microstructures’ processing characteristics using X-ray photo dcomposition and desorption are studied in the highest energy region (2 keV to >12 keV). While the exposed surface states are seen melting and boiling from the remaining bubble structure of the irradiated surface, basic photochemistry of PTFE is also same as previous reports and high-aspect ratio structures are successfully formed. We developed new Ni stencil electroformed stencil masks and successfully fabricated first and practical example of PTFE micro fluidic parts. The characteristics of fabricated micro fluidic parts, a PTFE fluid filter for vertical fluid flow operation which works as passive valve, agreed with the calculated results. This suggests that the accuracy of patterning is adequate to apply this technique to fabricate microfluidic parts and other various microparts.     

Enzyme-linked immunosorvent assay using vertical microreactor stack with microbeads

The advantages of vertical microreactor stack with three-dimensional (3D) structure for immunoassay are discussed. The vertical microreactor stack uses vertical fluid flow operation with multifunctional fluid filters. The multi function of fluid filter is very effective for micromixing and passive valve operation. The mechanism of micromixing is discussed by using computational fluid dynamics (CFD), and we know that the mixing mechanism based on Coanda effect. To evaluate the micromixing performance of fluid filter, we demonstrated enzyme reaction with unique repeat mixing operation. As the results, we proved that the fluid filter has very effective mixing performance. The detection limit, which demonstrated by competition enzyme-linked immunosorvent assay (ELISA), is comparable with recommended detection limit, which suggested by Japanese ministry for the environment.     

Development of an algorithm for corneal reshaping with a scanning laser beam

The corneal-ablation rate, the beam-intensity distribution, and the initial and the desired corneal topographies are used to calculate a spatial distribution map of laser pulses. The optimal values of the parameters are determined with a computer model, for a system that produces 213-nm radiation with a Gaussian beam-intensity distribution and a peak radiant exposure of 400 mJ/cm(2). The model shows that with a beam diameter of 0.5 mm, an overlap of 80%, and a 5-mm treatment zone, the roughness is less than 6% of the central ablation depth, the refractive error after correction is less than 0.1 D for corrections of myopia of 1, 3, and 6 D and less than 0.4 D for a correction of myopia of 10 D, and the number of pulses per diopter of correction is 2500 when the beam-intensity distribution is Gaussian and 580 when it is flat.     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.     

Reduction of system matrices of planar beam in ANCF by component mode synthesis method

A method of reducing the system matrices of a planar flexible beam described by an absolute nodal coordinate formulation (ANCF) is presented. In this method, we focus that the bending stiffness matrix expressed by adopting a continuum mechanics approach to the ANCF beam element is constant when the axial strain is not very large. This feature allows to apply the Craig–Bampton method to the equation of motion that is composed of the independent coordinates when the constraint forces are eliminated. Four numerical examples that compare the proposed method and the conventional ANCF are demonstrated to verify the performance and accuracy of the proposed method. From these examples, it is verified that the proposed method can describe the large deformation effects such as dynamic stiffening due to the centrifugal force, as well as the conventional ANCF does. The use of this method also reduces the computing time, while maintaining an acceptable degree of accuracy for the expression characteristics of the conventional ANCF when the modal truncation number is adequately employed. This reduction in CPU time particularly pronounced in the case of a large element number and small modal truncation number; the reduction can be verified not only in the case of small deformation but also in the case of a fair bit large deformation.