Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.     

The Effects of Conventional Stabilizers and Phenol Compounds Used as Antioxidants on the Stabilization of Nitrocellulose

The thermal behavior of nitrocellulose (NC) containing diphenylamine (DPA), 2‐nitrodiphenylamine (2‐NO₂‐DPA), N‐nitrosodiphenylamine (N‐NO‐DPA), ethyl centralite (EC), akardite II (AKII), 1,1,3‐tri‐(2‐methyl‐4‐hydroxy‐5‐tert‐butyl‐phenyl)‐butane (BP_less), 3‐(3,5‐di‐tert‐butyl‐4‐hydroxy‐phenyl)‐propionic acid octadecyl ester (BP_hin), and 3‐(3‐tert‐butyl‐4‐hydroxy‐5‐methyl‐phenyl)‐propionic acid 2‐(9‐{2‐[3‐(3‐tert‐butyl‐4‐hydroxy‐5‐methyl‐phenyl)‐propionyloxy]‐1,1‐dimethyl‐ethyl}‐2,4,8,10‐tetraoxa‐spiro [5.5] undec‐3‐yl)‐2‐methyl‐propyl ester (BP_semi) was observed during isothermal storage at 393 K using a C80 microcalorimeter. The results indicate that each stabilizer decreased NC's maximum heat release rate and increased the induction period of heat release. We also observed that the maximum heat release rate and the induction period were dependent on the amount of stabilizer. DPA decreased the maximum heat release rate to the greatest extent, with the other stabilizers having similar effects on the decrease of maximum heat release rate. AKII prolonged the induction period of heat release most. The order of prolongation of the induction period was AKII>2‐NO₂‐DPA≈DPA>N‐NO‐DPA≈EC>BP_less≈BP_semi≈BP_hin.     

New application of laser beam to failure analysis of LSI with multi-metal layers

A new technique for failure analysis of LSI with multi metal layers is described. There is a fabrication technique to form a big and optional window on upper layers using Nd-YAG laser without destroying any electrical function, and to approach the failure point through this window. The failure analysis procedure based on logical flow is presented. Fabrication technique is located in part of this procedure which consists of four steps. Two difficult reasons for approaching the failure point without fabrication technique are described. This difficulty results from line composition and line width. The fabrication procedure using Nd-YAG laser is reported. This procedure is to cover the chip surface with photo resist, and form a big and optional size window on upper layer with laser beam, and finally expose the purposed layer. Three failure analysis examples using this technique are introduced: unformed contact falure mode, Si-noduled failure mode, and isolation destroying failure mode.     

Dietary Protein Derived from Dried Bonito Fish Improves Type‐2 Diabetes Mellitus‐Induced Bone Frailty in Goto‐Kakizaki Rats

Type‐2 diabetes mellitus (T2DM) induces bone frailty. Protein and polyunsaturated fatty acids (PUFA) contained in fish can be effective in enhancing bone quality, but the bone developing effect of fish protein containing less PUFA has not been evaluated in young animals with T2DM. We prepared a bonito fish (BF) and defatted BF (DBF) and hypothesized that protein contained in BF and DBF would be effective for mitigating the effects of T2DM‐induced bone frailty. We mainly evaluated the effect of dietary BF and DBF on bone and apparent calcium absorption in young Goto‐Kakizaki (GK) rats with T2DM. GK rats were divided into 3 groups based on diets (casein, BF, and DBF) and fed with each diet for 6 wk. Wistar rats were fed with the casein diet as a non‐T2DM control. Bone mass, bone strength, apparent calcium absorption, and serum biochemical parameters were determined. The dry weight and strength of the femurs were lower in the GK rats than in the Wistar rats fed with the casein diet. Dietary intake of the BF and DBF diets enhanced the maximum load and dry weight of the femurs and suppressed the serum alkaline phosphatase activity although the apparent calcium absorption was lower in the GK rats fed with the BF and DBF diets than in those fed with the casein diet. These parameters were not different between the rats fed with the BF and DBF diets. Our data suggest that protein contained in the BF and DBF diets improved T2DM‐induced bone frailty.     

Formation and Characterization of Ce3ZrO8 Prepared by the Hydrazine Method

A compound denoted as (Ce_0.75Zr_0.25)O₂ (Ce, ZrO₈) is formed near room temperature from cerium and zirconium nitrates using hydrazine monohydrate. It has a cubic unit cell with a = 0.5342 nm. Characterization of powders heated to various temperatures at 10°C/min demonstrates that the specific surface area does not decrease below 20 mVg until >1000°C.     

Electrical conductivity and domain structure in ferroelastic Tl2SeO4

We have carried out the optical observation, electrical conductivity and ²⁰⁵Tl NMR measurements, and subsequently investigated the origin of the large conductivity above ferroelastic phase transition temperature T_c (=661 K) on the basis of the domain structure and the crystal structure. Electrical conductivity exhibits the discontinuous increase around T_c with increasing temperature and becomes approximately 5 × 10⁻³ S m⁻¹ above T_c. Moreover, from the ²⁰⁵Tl NMR measurements, it is found that mobile Tl ions exist above T_c. Furthermore, from the analysis of the domain structure based on the crystal structure in the low-temperature ferroelastic phase, it is also found that the anomalously large fluctuations of SeO₄ tetrahedrons exist above T_c. It is deduced from these results that the high electrical conductivity above T_c is caused by the mobile Tl ions closely related to the anomalously large fluctuations of SeO₄ tetrahedrons accompanied by the ferroelastic phase transition.     

Synthesis and electronic property of platinum nanowire and nanoparticle in mesoporous silica template

Platinum nanowires and nanoparticles were selectively synthesized in mesoporous silicas FSM-16 and HMM-1. The nanowires are 3 nm in diameter and several hundred nm to μm in length with high crystallinity. Pt nanowires and nanoparticles can be isolated by dissolving silica matrix with HF. The Pt wires extracted from organosilica HMM-1 have a nanonecklace structure, while the wires from siliceous FSM-16 have a nanorod structure. The extracted Pt nanoparticles (3 nm in size) on HOPG show the Coulomb staircase phenomena in STM/STS analysis. The mechanism for formation of the Pt nanowires is based on the migration of Pt ions in the mesoporous channels.     

Structural characterization of photoreduced complete and incomplete cubane-type molybdenum oxide clusters in CO and their catalytic behavior in propene metathesis reaction

SiO2-impregnated complete and incomplete cubane-type molybdenum oxide clusters such as [(RhCp*)₄Mo₄O₁₆] (I) and [(RhCp*)₂Mo₃O₉(OMe)₄] (II) were photoreduced with a UHP-Hg lamp (> 365 nm) in CO, resulting in the formation of catalytically active species for propene metathesis at 300 K. The CO-photoreduced Mo oxide clusters were characterized by EXAFS, IR, XPS and TPD technique. The results suggest that the Mo-O_4c (four-centered bridging oxygens) in I were specifically reduced with CO under the illumination to produce two sets of subcarbonyl species, e.g., those characteristic of the IR bands at 2061 and 2021 cm^–1, which were thermally inactive for the¹³CO exchange reaction but very active under illumination at 300 K, possibly assignable to Mo(CO)x (x = 2, 3), whereas those at 2092 and 2035 cm^–1 due to Rh(CO)₂, which were readily exchangeable with¹³CO at 300 K in dark. Removal of both carbonyls attached on Rh and Mo in photoreduced I and II by evacuation at 375–440 K led to the formation of oxygen-deficient Mo⁴+/Mo⁵⁺ sites, which exhibited high catalytic activities in propene metathesis at 300 K to produce an equimolar mixture of ethene and 2-butenes. The CO-photoreduced incomplete cubane Mo oxide cluster (II) exhibited higher activities and higher trans/cis ratios of 2-butenes in the reaction, compared with those on the photoreduced I.     

Simultaneous Measurements of an Ultrasound and a Torsional Oscillator for 4He in a Nanoporous Glass

Previously, we carried out ultrasonic measurements for liquid ⁴He filled in a nanoporous glass (Gelsil), and observed an increase in the sound velocity due to decoupling of the superfluid component. At zero pressure, the superfluid transition temperature T _C is suppressed to 1.4 K from the bulk lambda point, 2.17 K. This behavior is the same as torsional oscillator measurements by Yamamoto et al. (Phys. Rev. Lett. 93:075302, 2004). However, the pressure dependence of T _C and the temperature dependence of the superfluid fraction are very different from the torsional oscillator measurements. In order to clarify the origin of the difference, we have developed a new technique of simultaneous measurement of an ultrasound and a torsional oscillator, and the system successfully works for a nanoporous glass. Here, we compare decoupling of the superfluid component for ⁴He films between an ultrasound and a torsional oscillator.