胃动力信息采集与分析系统设计

本文设计了一套提取胃电和胃阻抗信号的胃动力信息采集与分析系统，该系统由采集系统和分析系统两部分构成。前者以单片机（ADuC834）为核心部件，实现了胃电和生物阻抗信号的同步采集和数据传输。后者对提取的阻抗信号和胃电信号运用小波多分辨分析处理，利用小波变换将胃阻抗信号从呼吸和血流信号中分离。系统可以应用于分析功能性消化不良患者胃动力的电过程和机械过程。     

En/Decoder for Spectral Phase-Coded OCDMA System Based on Amplitude Sampled FBG

A novel en/decoder for spectral phase-coded optical code-division multiple-access system based on amplitude sampled fiber Bragg grating (FBG) is proposed. Both equivalent chirp and equivalent phase shift are achieved by amplitude sampling. Compared with previous en/decoder based on step chirped FBG, it is easier to fabricate. The performance of the proposed en/decoder is verified by both numerical simulation and experimental demonstration.     

提高工程量清单编制质量的思考

文章从如何提高对工程量清单编制工作重要性的认识入手,分析了实现计价理念、计价侧重点和造价控制观念转变的必要性,重点阐述了提高工程量清单编制质量应给予足够重视的几个关键环节。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry     

基础锚栓预埋加固方案

结合工程实例 ,介绍轻钢结构系统基础锚栓预埋、加固解决方案 ,并介绍了加固系统的制作及使用方法 ,可供工程人员参考     

长治市辛安引水二期工程水锤消除方法及原理

结合工程实例 ,介绍了双速阀、压力波动预止阀、全压高速排气阀在引水工程中的作用 ,通过实践证明 ,采用适当措施 ,能有效预防和消除水锤的危害 ,达到节能降耗的目的     

A new efficient numerical method and the dynamic analysis of composite laminates with piezoelectric layers

Firstly, a numerical method for the inversion of Laplace transform is developed and its accuracy is shown through examples. Then, a state-vector equation for the dynamic problems of piezoelectric plates is deduced directly from a modified mixed variational principle for piezoelectric bodies and its exact solution for the dynamic problems of simply supported rectangle piezoelectric plate is simply given. For multilayered hybrid plates, we derive the solution in terms of the propagator matrices. The techniques accounts for the compatibility of generalized displacements and generalized stresses on the interface both the elastic layers and piezoelectric layers, and the transverse shear deformation and the rotary inertia of laminate are also considered in the global algebraic equation of structure. Meanwhile, there is no restriction on the thickness and the number of layers. As an application of the numerical inversion of Laplace transform presented in this paper, typical numerical examples of the harmonic vibration and transient response are proposed and discussed. Since the highly accurate numerical results, they can serve as benchmarks to test various thick plate theories and various numerical methods, such as the finite and boundary element methods for transient response problems.     

水上地震折射互换法误差分析

在理论上，用源检互换的方法进行折射地震勘探是没有误差的，在某些特殊条件下无法铺设检波器而又必须进行折射地震勘探时它也是唯一的选择，然而，在实际工作中，由于各种因素的影响，其误差是不可忽略的。为此，本文从地震折射运动学的角度对水上地震折射互换法因过河钢丝绳的重量、水的流速和流向、炮点深度等客观因素造成的解释误差进行了分析，揭示了水上地震折射互换法应注意的问题。这对水上地震折射互换法的资料解释进行误差校正提供了理论基础。     

Lactic acid production from dining‐hall food waste by Lactobacillus plantarum using response surface methodology

BACKGROUND: Food waste generally has a high starch content and is rich in nutritional compounds, including lipids and proteins. It therefore represents a potential renewable resource. In this study, dining‐hall food waste was used as a substrate for lactic acid production, and response surface methodology was employed to optimise the fermentation conditions. RESULTS: Lactic acid biosynthesis was significantly affected by the interaction of protease and temperature. Protease, temperature and CaCO₃ had significant linear effects on lactic acid production, while α‐amylase and yeast extract had insignificant effects. The optimal conditions were found to be an α‐amylase activity of 13.86 U g^?1 dried food waste, a protease activity of 2.12 U g^?1 dried food waste, a temperature of 29.31 °C and a CaCO₃ concentration of 62.67 g L^?1, which resulted in a maximum lactic acid concentration of 98.51 g L^?1 (88.75% yield). An increase in inoculum size would be appropriate for accelerating the depletion of initial soluble carbohydrate to enhance the efficiency of α‐amylase in dining‐hall food waste fermentation. CONCLUSION: A suitable regression model for lactic acid production was developed based on the experimental results. Dining‐hall food waste was found to be a good substrate for lactic acid fermentation with high product yield and without nutrient supplementation. Copyright © 2008 Society of Chemical Industry