Effect of flashing light from blue light emitting diodes on cell growth and astaxanthin production of Haematococcus pluvialis

To conserve energy in the production of astaxanthin by the green alga Haematococcus pluvialis, we utilized intermittent flashing light from blue light emitting diodes (LEDs) and investigated the effects of the incident light intensity (2-12 micromol m(-2) s(-1)), duty cycle (17-67%) and frequency (25-200 Hz) of flashing on the cell growth and astaxanthin production. In the above ranges, the final astaxanthin concentration under illumination by flashing light was significantly higher than that obtained under illumination with continuous light at the same incident intensity. For example, flashing light at an incident intensity of 8 micromol m(-2) s(-1) gave the same final astaxanthin concentration that was obtained under continuous light illumination at 12 micromol m(-2) s(-1), thus reducing energy consumption by 1/3. We therefore conclude that flashing light from blue LEDs is a promising illumination method for indoor algal cultivation using photobioreactors.     

Performance Evaluation of Magnetostrictive Small Wind Turbines Using Fe–Co Alloy–Based Clad Sheets

In this study, the Fe–Co alloy is combined with cobalt ferrite (CoFe₂O₄) and nickel (Ni) to form Fe–Co/CoFe₂O₄ and Fe–Co/Ni clad sheets and their energy-harvesting performance is evaluated. The Fe–Co/CoFe₂O₄ clad sheet exhibits an output voltage of 4.229 mV and an output power of 6.89 nW at a wind speed of 10 m s⁻¹. The energy-harvesting performance of both these clad sheets cannot be quantitatively compared owing to their different thicknesses, which result in varying volume and distance from the neutral plane. Nevertheless, the values of output voltage and power for Fe–Co/CoFe₂O₄ are higher than those for Fe–Co/Ni (2.107 mV and 0.294 nW).     

One-step fabrication of Li2TiO3 ceramic pebbles using pulsed YAG laser

A large amount of Li-containing ceramic breeder pebbles is packed in the solid breeding blanket of a nuclear fusion reactor. Several pebble fabrication technologies have been proposed in previous studies, including wet process, emulsion method, extrusion spheronization, additive manufacturing, and melt process. However, a simple, energy-effective, and scalable fabrication technology remains to be developed for the automated mass production and reprocessing of used radioactive pebbles post-operation. Selective laser melting potentially enables the quick and automated fabrication of breeder pebbles. Herein, we employ a high-power density pulse laser to produce ceramic breeder pebbles. A pulsed YAG laser was irradiated over a lithium metatitanate (Li₂TiO₃) powder bed in air, and the corresponding temperature was monitored using fiber-type infrared pyrometers. Spherical Li₂TiO₃ pebbles were successfully fabricated in a single step with an average diameter of 0.78 ± 0.13 μm and the sintering density of 87.4% ± 5.6% (input power: 7.9 J/pulse). The irradiated Li₂TiO₃ powder melted and turned spherical under surface tension and rapidly solidified, resulting in uniaxial fine grains and a decrease in the degree of long-range cation ordering.     

Bandgap Tunable Oxynitride LaNb2O7–xNx Nanosheets

Bandgap tunable lanthanum niobium oxynitride [LaNb₂O_7-xN_x]^(1+x)− nanosheet is prepared by the delamination of a Ruddlesden−Popper phase perovskite oxynitride via ion−exchange and two−step intercalation processes. The lanthanum niobium oxynitride nanosheets have a homogeneous thickness of 1.6 nm and exhibit a variety of chromatic colors depending on the nitridation temperature of the parent-layered oxynitride. The bandgap energy of the nanosheets is determined by ultraviolet photoemission spectroscopy, Mott–Schottky, and photoelectrochemical measurements and is found to be tunable in the range of 2.03–2.63 eV. Furthermore, the oxide/oxynitride superlattice structures are fabricated by face−to−face stacking of 2D crystals using oxynitride [LaNb₂O_7-xN_x]^(1+x)− and oxide [Ca₂Nb₃O₁₀]⁻ nanosheets as building blocks. Moreover, the superlattices-like restacked oxynitride/oxide nanosheets hybrid exhibits unique proton conductivity and dielectric properties strongly influenced by the oxynitride nanosheets and enhanced photocatalytic activity under visible light irradiation.     

Effects of nitridation temperature on properties of sintered reaction-bonded silicon nitride

We prepared sintered reaction-bonded silicon nitride ceramics by using yttria and magnesia as sintering additives and evaluated effects of the nitridation temperature on their microstructure, bending strength, fracture toughness, and thermal conductivity. The effects of the nitridation temperature were large, but different depending on the property. The ratio of β-phase in the nitrided compacts significantly increased with increasing the nitridation temperature, whereas their microstructures had no clear difference. Although the bending strength varied, it maintains a high value of 800 MPa. Fracture toughness was almost constant regardless the temperature. The thermal conductivity improved as the β-phase in the nitrided compact increases. This resulted in a decrease of the lattice oxygen content and increase of the thermal conductivity. Therefore, elevating the nitridation temperature and consequently the β-phase ratio should be a promising strategy for achieving compatibly high strength and high thermal conductivity, which are generally known to be in a trade-off relationship.     

Effects of nitrogen pressure on properties of sintered reaction-bonded silicon nitride

We prepared sintered reaction-bonded silicon nitride ceramics by using yttria and magnesia as sintering additives and evaluated the effects of nitrogen pressure (0.1–1.0 MPa) on their microstructure, bending strength, fracture toughness, and thermal conductivity. The ratio of β phase in the nitrided compacts varied with the pressure and increased with increasing it. Since many β grains in the nitrided compacts were formed and interlocked each other with a stable three-dimensional structure which restricted the shrinkage during the sintering procedure, many pores remained in the sintered body. Under the middle pressure (0.3–0.5 MPa), the grains grew large because the number of formed nuclei was small. On the other hand, under the high pressures (0.8–1.0 MPa), the grains were relatively fine and uniform because of a large number of nuclei. Since the porosity and grain length depended on the nitridation mechanism, which was affected by the nitrogen pressure, the properties largely varied accordingly. The nitridation at 0.1 MPa gave the best properties in this study.     

Impact of Narrowing Density of States in Semiconducting Polymers on Performance of Organic Field-Effect Transistors

To improve the performance of organic field-effect transistors (OFETs) employing π-conjugated polymers, a basic understanding of the relationships between the material properties and device characteristics is crucial. Although the density of states (DOS) distribution is one of the essential material properties of semiconducting polymers, insights into how the DOS shape affects the mobility (µ), subthreshold swing (S), and contact resistance (R_C) in OFETs remain lacking. In this study, by combining sensitive DOS measurements and multilayered OFET structures, it is experimentally demonstrated that narrower DOS widths in the polymer channels lead to higher µ, smaller S, and lower R_C. By contrast, variation of the DOS in the bulk layer does not affect the performance. These results demonstrate a direct relationship between the polymer properties and OFET performance and highlight the importance of controlling the DOS width in π-conjugated polymers.