Development of a three-dimensional finite element model for a unidirectional carbon fiber reinforced plastic based on X-ray computed tomography images and the numerical simulation on compression

A unidirectional carbon fiber reinforced plastic (CFRP) was scanned by an X-ray computed tomography (CT) system. Based on the X-ray CT images, a three-dimensional model with random fiber waviness was developed. Each fiber location was identified in a sectional CT image. Subsequently, the relative displacement of fibers between adjacent sectional CT images was obtained with a digital image correlation method. This procedure was repeated to obtain fiber waviness along the axial direction. The constructed three-dimensional fiber model showed random waviness of each fiber in the unidirectional CFRP. Finite element analysis was performed using the three-dimensional model. Simulation results showed bending and twisting deformations coupled with axial contractions during axial compression, which developed due to fiber waviness. A reduction of the fiber directional Young’s modulus due to fiber random waviness was quantitatively evaluated.     

Individual and combined effects of water quality and empty bed contact time on As(V) removal by a fixed-bed iron oxide adsorber: Implication for silicate precoating

The individual and combined effects of changes in water quality (i.e. pH, initial concentrations of arsenate (As(V)) and competing ions) and empty bed contact time (EBCT) on As(V) removal performance of a fixed-bed adsorber (FBA) packed with a nanostructured goethite-based granular porous adsorbent were systematically studied under environmentally relevant conditions. Rapid small scale column tests (RSSCTs) were extensively conducted at different EBCTs with synthetic waters in which pH and the concentrations of competing ions (phosphate, silicate, and vanadate) were controlled. In the absence of the competing ions, the effects of initial As(V) concentration, pH, and EBCT on As(V) breakthrough curves were successfully predicted by the homogeneous surface diffusion model (HSDM) with adsorption isotherms predicted by the extended triple layer model (ETLM). The interference effects of silicate and phosphate on As(V) removal were strongly influenced by pH, their concentrations, and EBCT. In the presence of silicate (≤21 mg/L as Si), a longer EBCT surprisingly resulted in worse As(V) removal performance. We suggest this is because silicate, which normally exists at much higher concentration and moves more quickly through the bed than As(V), occupies or blocks adsorption sites on the media and interferes with later As(V) adsorption. Here, an alternative operating scheme of a FBA for As(V) removal is proposed to mitigate the silicate preloading. Silicate showed a strong competing effect to As(V) under the tested conditions. However, as the phosphate concentration increased, its interference effect dominated that of silicate. High phosphate concentration (>100 μg/L as P), as experienced in some regions, resulted in immediate As(V) breakthrough. In contrast to the observation in the presence of silicate, longer EBCT resulted in improved As(V) removal performance in the presence of phosphate. Vanadate was found to compete with As(V) as strongly as phosphate. This study reveals the competitive interactions of As(V) with the competing ions in actual adsorptive treatment systems and the dependence of optimal operation scheme and EBCT on water quality in seeking improved As(V) removal in a FBA.     

Fundamental Evaluation of Power Supply and Rectifiers for Wireless Power Transfer Using Magnetic Resonant Coupling

This paper provides a fundamental analysis of a power supply and rectifiers for wireless power transfer using magnetic resonant coupling (MRC). MRC enables efficient wireless power transfer over middle‐range transfer distances. MRC for wireless power transfer should operate at a high frequency in the industry science medical band, such as 13.56 MHz, because the size of the transfer device decreases at higher transfer frequencies. Therefore, the output frequency of the power supply on the transmitting side should be 13.56 MHz. In addition, the rectifier on the receiving side is operated at a high frequency. This paper focuses on the reflected power in the power supply and rectifiers. Thus, the parametric design method is clarified for the power supply, including a low‐pass filter to match the output, the impedance of the power supply with the characteristic impedance of the transmission line. In addition, the effects on the rectifiers of silicon carbide and gallium nitride diodes are confirmed by performing an experiment and a loss analysis.     

Expression of aldehyde dehydrogenase gene increases hydrogen production from low concentration of acetate by Rhodobacter sphaeroides

Rhodobacter sphaeroides RV (RV) is a hydrogen-producing bacterium exhibiting the highest yield of hydrogen production from organic acids such as lactate and acetate, which are the byproducts of hydrogen fermentation by hydrogen-producing anaerobic bacteria. Co-fermentation of the RV strain with anaerobic bacteria is an efficient method of hydrogen production. However, less than 21 mM acetate is produced by the anaerobic bacteria, which is too low for efficient hydrogen production by the RV strain; it requires approximately 75 mM acetate. In this study, 2 distinct isozymes of aldehyde dehydrogenase from Rhodospirillum rubrum were separately overexpressed in the RV strain. The recombinant RV strains that were designated as RVAD1 and RVAD2, exhibited 13-fold higher ALDH activities than the wild-type RV strain. Hydrogen yields of both of the recombinant strains were 1.4-fold higher than that of the RV strain in 21 mM acetate. In 43 mM acetate, the RVAD1 strain showed higher yield, though the RVAD2 strain showed lower yield as compared to that of the RV strain. In 64 mM acetate and all concentrations of lactate tested (21, 43 and 64 mM), the yields of the recombinant strains were lower than those of the RV strain. The intact (empty) expression plasmid increased the ALDH activity and had little effect on the hydrogen production in acetate, however, it decreased the production in lactate. At the beginning of the fermentation process, when very little hydrogen had been produced, the recombinant strains expressing the ALDH gene consumed smaller amounts of acetate compared to the wild-type strain. We have discussed the effects of ALDH on hydrogen production in this report.     

Novel circular-beam equalizing techniques that use graded-index fiber optics for a high-power laser diode

We demonstrate a novel method of equalizing a laser diode (LD) beam into a circular beam. This method uses the twist effect of graded index (GI) fiber optics. An asymmetric LD beam with beam qualities of M2 = 500 in the slow axis and M2 = 4 in the fast axis is converted successfully into a symmetric circular beam with a beam quality of M2 = 175. The circular-output beam with 92% coupling efficiency from the fiber input to the fiber output is obtained with a 5-m-long GI1200 (1200 means a core diameter of 1200 microm) fiber for a 2-W LD array. We extend the experiments to a higher-power source with higher asymmetric beam qualities of M2 = 3000 and M2 = 4. By slightly bending the GI10000 (10000 means a core diameter of 10,000 microm) fiber, we have succeeded in generating a symmetric beam with a improved beam quality of M2 = 2000. The average beam quality is preserved when the asymmetric ratio is not high, and the beam quality degradation ratio is investigated up to asymmetric ratios of 750.     

Structural evolution in Fe ion implanted Si upon thermal annealing

We have performed high-dose Fe ion implantation into Si and characterized ion-beam-induced microstructures as well as annealing-induced ones using transmission electron microscopy (TEM) and grazing-incidence X-ray diffraction (GIXRD). Single crystals of Si(1 0 0) substrate were irradiated at 623 K with 120 keV Fe⁺ ions to a fluence of 4 × 10¹⁷ cm⁻². The irradiated samples were then annealed in a vacuum furnace at temperatures ranging from 773 K to 1073 K. Cross-sectional TEM observations and GIXRD measurements revealed that a layered structure is formed in the as-implanted specimen with ε-FeSi, β-FeSi₂ and damaged Si, as component layers. A continuous β-FeSi₂ layer was formed on the topmost layer of the Si substrate after thermal annealing.     

Intra-body data transmission for the personal area network

Intra-body communication is a wireless means of exchanging information within a personal area network (PAN) between wearable electronic sensors and devices. The feasibility of intra-body communication is confirmed through several experiments on signal propagation within the human body, and a human phantom is designed and used to obtain reproducible results over repeated experiments. Based on the results of these experiments, a prototype transmission system is constructed using aluminum electrodes powered by 3 V DC and operating in the 10.7 MHz frequency modulation (FM) band. This prototype is demonstrated to be capable of transmitting analog signals through the human subjects in the presence of external noise. Digital data transmission at 9600 bps is also achieved using newly fabricated 10.7 MHz frequency shift keying (FSK) transmitter and receiver devices. The carrier frequency of 10.7 MHz is the intermediate frequency of FM radio receivers, meaning that the proposed system can make use of a wide selection of inexpensive, commercial radio frequency devices.     

Development of a novel emitting vinyl polymer and its application in organic electroluminescent devices

Abstract— A novel emitting vinyl polymer, poly[4‐(7‐{4‐[N,N‐bis(9,9‐dimethylfluoren‐2‐yl)amino]phenyl}‐2,1,3‐benzothiadiazol‐4‐yl)phenylethylene] (PVFABT), was designed and synthesized. The new vinyl polymer was found to form smooth amorphous films with a high glass‐transition temperature of 199°C. The polymer possesses bipolar character with both electron‐donating and accepting properties. It undergoes reversible anodic oxidation and cathodic reduction to give stable cation and anion radicals. It exhibits intense orange fluorescence in solution and as film. A multilayer organic electroluminescent device using PVFABT as an emitting material emitted orange light, exhibiting high performance.     

Production and performance of the inFOCmicroS 20-40-keV graded multilayer mirror

The International Focusing Optics Collaboration for microCrab Sensitivity (InFOCmicroS) balloonborne hard x-ray telescope incorporates graded Pt/C multilayers replicated onto segmented Al foils to obtain the significant effective area at energies previously inaccessible to x-ray optics. Reflectivity measurements of individual foils demonstrate our capability to produce a mass quantity of multilayered foils with a rms roughness of 0.5 nm. The effective area of the completed mirror is 78 and 22 cm2 at 20 and 40 keV, respectively. The measured half-power diameter is 2.0 +/- 0.6 are min (90% confidence). The successful completion of this mirror demonstrates its applicability to future x-ray telescopes such as Constellation-X.