High precision chemical mechanical polishing of highly-boron-doped Si wafer used for epitaxial substrate

The surface waviness with concentric circular pattern is generated on highly-boron-doped Si wafer by chemical–mechanical polishing (CMP) with amine system polishing slurry. To investigate the generation mechanism of the waviness, the mechanical and chemical characteristics were clarified using the silicon crystal samples with various boron concentration level ranging from 2.9 × 10¹⁷ cm⁻³ to 1.3 × 10²⁰ cm⁻³. The conventional silicon substrate used as epitaxial wafer has boron concentration of about 2.5 × 10¹⁸ cm⁻³, a region at which the radical change of etching rate is induced with amine system chemical reagent. The mechanical micro-hardness of highly-boron-doped Si is 30% higher than that of lightly-doped Si. It is found that SiB bond in crystal lattice is firmed up and stabilized for mechanical stress and chemical reaction. To cancel the difference in CMP rate based on boron concentration deviation, increasing the mechanical action in CMP was proposed and performed. The precision CMP was performed using the harder polishing pad and a smooth surface without waviness was obtained.     

Loss of H19 imprinting and up-regulation of H19 and SNRPN in a case with malignant mixed Müllerian tumor of the uterus

An unusual clinical presentation of a patient with neuronal intestinal dysplasia is presented. A 46-year-old male noted a palpable mass in the right lower quadrant of his abdomen for two months. A computed axial tomographic scan showed a thickened wall of the cecum with a tumor-like appearance. The excised specimen consisted of a mass caused by the thickened, edematous wall of the dilated cecum and appendix. The wall of the cecum and appendix measured up to 2.5 and 0.8 cm, respectively, in thickness. Microscopic studies showed extensive hyperplasia and hypertrophy of the ganglia and nerve plexuses and hypertrophy of the muscularis propria, consistent with neuronal intestinal dysplasia.     

Identification of Tumor Suppressive Genes Regulated by miR-31-5p and miR-31-3p in Head and Neck Squamous Cell Carcinoma

We identified the microRNA (miRNA) expression signature of head and neck squamous cell carcinoma (HNSCC) tissues by RNA sequencing, in which 168 miRNAs were significantly upregulated, including both strands of the miR-31 duplex (miR-31-5p and miR-31-3p). The aims of this study were to identify networks of tumor suppressor genes regulated by miR-31-5p and miR-31-3p in HNSCC cells. Our functional assays showed that inhibition of miR-31-5p and miR-31-3p attenuated cancer cell malignant phenotypes (cell proliferation, migration, and invasion), suggesting that they had oncogenic potential in HNSCC cells. Our in silico analysis revealed 146 genes regulated by miR-31 in HNSCC cells. Among these targets, the low expression of seven genes (miR-31-5p targets: CACNB2 and IL34; miR-31-3p targets: CGNL1, CNTN3, GAS7, HOPX, and PBX1) was closely associated with poor prognosis in HNSCC. According to multivariate Cox regression analyses, the expression levels of five of those genes (CACNB2: p = 0.0189; IL34: p = 0.0425; CGNL1: p = 0.0014; CNTN3: p = 0.0304; and GAS7: p = 0.0412) were independent prognostic factors in patients with HNSCC. Our miRNA signature and miRNA-based approach will provide new insights into the molecular pathogenesis of HNSCC.     

Roles of CCL2-CCR2 Axis in the Tumor Microenvironment

Chemokines are a small family of cytokines that were first discovered as chemotactic factors in leukocytes during inflammation, and reports on the relationship between chemokines and cancer progression have recently been increasing. The CCL2-CCR2 axis is one of the major chemokine signaling pathways, and has various functions in tumor progression, such as increasing tumor cell proliferation and invasiveness, and creating a tumor microenvironment through increased angiogenesis and recruitment of immunosuppressive cells. This review discusses the roles of the CCL2-CCR2 axis and the tumor microenvironment in cancer progression and their future roles in cancer therapy.     

A comparative study of the emotional assessment of automotive exterior colors in Asia

This article compares color assessments of automotive exteriors at four locations in China, Thailand and Japan. This study employed painted panels of twelve colors, thirty sensory words and fifteen pairs of emotion variables. It also used reference figures of nine cars that included four styling categories, namely sedans, compacts, sport utility vehicles and sports cars. The results of like-dislike tests revealed that basic automotive exterior colors, such as black, white and red, were highly preferred across locations. However, geographical differences are apparent in the preference for some non-basic colors. To elucidate these geographical differences, a Chi-square test and principal component analysis were performed on the data on emotion variables. The results revealed both similarities and differences in color preferences among the four locations. Color preferences were similar in Hong Kong and Shanghai when simply evaluated by color samples. However, similar preferences for automotive exterior colors were observed in Hong Kong, Kyoto and Bangkok, but not in Shanghai. These results suggest that there is fluctuation in the emotion evoked by a color when the color is considered in the context of automotive exteriors. Therefore, this study indicates that automotive sales can be secured in the global marketplace by creating a single palette of exterior colors based on similar color preferences across countries. However, these results also indicate that preparing market-specific automotive-color line-ups can be an effective marketing strategy.     

SYNTHESIS OF NANOSTRUCTURED LiM0.15Mn1.85O4 (M = Mn,Co, Al,AND Fe) PARTICLES BY SPRAY PYROLYSIS IN A FLUIDIZED BED REACTOR

A novel technique has been developed to directly produce fine ceramic powders from liquid solution via spray pyrolysis in a fluidized bed reactor (SPFBR). Using this technique the preparation of LiM_0.15Mn_1.85O₄ (M = Mn, Co, Al, and Fe), which are the most promising cathode materials for lithium-ion batteries, has been carried out at a superficial velocity U₀ of 0.71 m/s, a reactor temperature T of 800°C, and a static bed height L_s of 100 mm. The as-prepared powders were spherical nanostructured particles that comprised primary particles of a few tens of nanometers in size, and they exhibited a pure cubic spinel structure without any impurities in the XRD patterns. The chemical composition of as-prepared samples showed good agreement with the theoretical values that proved stoichiometric formulae of the compounds. The specific surface area of as-prepared LiM_0.15Mn_1.85O₄ (M = Mn, Co, Al, and Fe) powders decreases with increasing the static bed height in each doping metal, while the crystallite size increases with the static bed height. As a result, the as-prepared powders showed larger crystallite size and smaller specific surface area than those prepared by conventional spray pyrolysis.     

Chemical Synthesis of a Synthetic Analogue of the Sialic Acid‐Binding Lectin Siglec‐7

As a basis for the development of an artificial carbohydrate‐binding lectin, we chemically synthesized a domain of siglec‐7, a well‐characterized sialic‐acid‐binding lectin. The full polypeptide (127 amino acids) was constructed by sequential native chemical ligation (NCL) of five peptide segments. Because of poor cysteine availability for NCL, cysteine residues were introduced at suitable ligation sites; these cysteine residues were alkylated in order to mimic native glutamine or asparagine residues, or converted to an alanine residue by desulfurization after NCL. After folding the full‐length polypeptide, the sialic‐acid‐binding activity of the synthetic siglec‐7 was clearly demonstrated by STD NMR and ELISA experiments. We succeeded in the synthesis of siglec‐7 by installing three extra cysteine residues with side‐chain modifications and found that these modifications did not affect the binding activity.     

Application of SPRT to an image data sequence for a remote monitoring system

Recently, remote monitoring camera systems have been widely used for security. In such systems, one important function is that the system automatically detects any change in the scenes from the monitoring cameras. In wireless remote monitoring camera systems, the images of the scenes are generally transmitted as compressed data (e.g., JPEG file), because of the capacity of the wireless channel. This article shows the automated detection of the change point in time-series data of compressed JPEG file quantity (Kbytes) from the monitoring camera by applying the sequential probabilistic ratio test (SPRT) and the Chow test, which is well known as a standard method for detecting structural change in time-series data.