Chemical Recycling of Carbon Fiber Reinforced Epoxy Composites Using Mild Conditions

The increased use of carbon fiber reinforced thermosets generates more waste and end-of-life products. However, an efficient recycling method for the expensive carbon fibers has not yet been developed. The selective decomposition of amine-cured epoxy resin under mild conditions is presented. A two-step method was investigated to decompose the epoxy resin. The optimum parameters were initially determined using a model compound. By analysis of the reaction products, a cleavage of the C–N bond according to the Cope elimination could be proven. Therefore, the Cope elimination is suggested as the main step of the decomposition of amine-cured epoxy resins in presence of hydrogen peroxide. By dissolving the resin, it is possible to recover resin-free fibers with unimpaired mechanical properties.     

Liquid Phase CO2-Analytics for Standardized Mass Transfer Characterization in Packed Columns

Mass transfer parameters are necessary for the design of absorption and desorption processes in packed columns. To determine the effective interfacial area and liquid side mass transfer parameters, CO₂ absorption and desorption are frequently used. Reliable analytics for concentration determination are essential to obtain correct results. In this work two methods of CO₂ liquid phase analysis are compared: first, the back titration of unreacted NaOH after prior precipitation of the bound CO₂; secondly, the inorganic carbon analysis with a commercial inorganic carbon analyzer.     

Two Cases of Pancytopenia with Coombs-Negative Hemolytic Anemia after Chimeric Antigen Receptor T-Cell Therapy

Background: Chimeric antigen receptor (CAR) T-cells are changing the therapeutic landscape of hematologic malignancies. Severe side effects include cytokine release syndrome (CRS) and immune effector cell-associated neurotoxicity syndrome (ICANS), but prolonged cytopenia has also been reported. The underlying mechanism for prolonged cytopenia is poorly understood so far. Cases: Severe pancytopenia with grade 2-3 anemia was marked 2–3 months after treatment. Laboratory evaluation revealed undetectable levels of haptoglobin with increased reticulocyte counts. Coomb’s tests were negative, no schistocytes were detected on blood smear, and infectious causes were ruled out. Increased erythropoiesis without lymphoma infiltration was noted on bone marrow biopsy. A spontaneous increase in haptoglobin and hemoglobin levels was observed after several weeks. For one patient, peripheral CAR-T levels were monitored over time. We observed a decline at the same time as hemoglobin levels began to rise, implying a potential causality. Conclusion: To our knowledge, we describe the first two cases of Coombs-negative hemolytic anemia after CAR-T treatment for B-cell lymphoma. We encourage routine monitoring for hemolytic anemia after CAR-T treatment and also encourage further investigations on the underlying mechanism.     

A technique for evaluating and improving the semantic transparency of modeling language notations

Software and Systems Modeling - The notation of a modeling language is of paramount importance for its efficient use and the correct comprehension of created models. A graphical notation,...     

Improved photon management in a photoelectrochemical cell with Nd-modified TiO2 thin film photoanode

Photon management involving particularly an up-conversion process is proposed as a relatively novel strategy for improving the efficiency of hydrogen generation in photoelectrochemical cells (PEC) with wide-band gap photoanodes. Optically active photoanode has been constructed by electrodeposition of titanium dioxide nanopowders containing Nd³⁺ ions, synthesized via a sol-gel method, onto ITO/TiO₂(thin film) substrates. Thin films of TiO₂ have been deposited by means of RF magnetron sputtering in an ultra-high-vacuum system. X-ray diffraction, scanning electron microscopy, UV-VIS-NIR spectrophotometry, and photoluminescence have been applied to assess the properties of photoanodes. In experiments involving photon-assisted water splitting, an external up-converter containing Yb³⁺/Er³⁺ rare-earth ions has been used. Photocurrent as a function of voltage (V_B) under illumination with white light is relatively high (280 μA at V_B = 0 V) for pure TiO₂ thin films and it is not affected by the electrodeposition of TiO₂:Nd³⁺ powders. NIR-driven up-conversion with laser excitation at λ = 980 nm has been found responsible for a 13-fold increase in photocurrent at V_B = 0 V in the modified PEC configuration.     

Vanadium promoted Ni(Mg,Al)O hydrotalcite-derived catalysts for CO2 methanation

A series of V-promoted hydrotalcite-derived nickel catalysts (1.0, 2.0, and 4.0 wt%) were tested in CO₂ methanation. Ni–I–V2.0 with 2.0 wt% vanadium loading showed the highest catalytic activity, achieving 74.7% of CO₂ conversion and 100% of CH₄ selectivity at 300 °C. XRD and XANES analyses showed that the smallest Ni⁰ particles in Ni–I–V2.0 were consistent with the improved textural features observed for this catalyst. Moreover, CO₂-TPD revealed the highest sum of weak and medium basic sites in Ni–I–V2.0 that can positively influence catalytic behavior. For the studied catalysts, a clear correlation was demonstrated between the catalytic activity and specific surface area, as well as the basic properties.     

Thermally and Magnetically Programmable Hydrogel Microactuators

The rapid development in micro-machinery enabled the investigation of smart materials that can embody fast response, programmable actuation, and flexibility to perform mechanical work. Soft magnetic actuators represent an interesting platform toward combining those properties. This study focuses on the synthesis of micro-actuators that respond to thermal and magnetic stimuli using micro-molding with a soft template as a fabrication technique. These microsystems consist of a hydrogel matrix loaded with anisotropic magnetic nanospindles. When a homogeneous magnetic field is applied, the nanospindles initially dispersed in monomer solution, align and assemble into dipolar chains. The ensuing UV-polymerization creates a network and conveniently arrests these nanostructures. Consequently, the magnetic dipole moment is coplanar with the microgel. Varying the shape, volume, and composition of the micro-actuators during synthesis provides a temperature-dependent control over the magnetic response and the polarizability. Beyond isotropic swelling, shaping the hydrogel as long thin ribbons with a passive layer on one side allows for differential swelling leading to bending and twisting deformations, for example, 2D- or 3D-spiral. These deformations involve a reversible amplification of the magnetic response and orientation of the hydrogels under magnetic field. Temperature control herewith determines the conformation and simultaneously the magnetic response of the micro-actuators.     

Evaluation of Damage Degree of Inconel 718 Alloy with the Use of Non-Destructive Methods

The article presents results of the investigation of the quantitative evaluation of the degree of damage, described by the measure of accumulated plastic strain obtained in a static tensile test, using selected non-destructive techniques. Inconel 718 alloy was tested. The tests were conducted using a new type of specimens of variable cross-sectional area of measuring part. This provided a continuous distribution of plastic strain in the gage part of the specimen. The permanent deformation that varies along the sample axis enables an analysis of damage induced by a plastic deformation. The proposed method enables replacing the series of specimens by one sample. Degradation of the alloy corresponds with the changes of the electromagnetic properties of the material—the phase angle of the complex impedance of the eddy current, as well as with acoustics properties of material—acoustic birefringence of ultrasonic waves. It allows to determine the degree of damage of the material using noninvasive, non-destructive methods. Using the damage parameter proposed by Johnson it is possible to obtain the correlation between the non-destructive results and a damage degree of the material. The presented testing method delivers information about changes in the material structure caused by permanent deformation.

     

The impact of a sewage treatment plant's effluent on sediment quality in a small bay in Lake Geneva (Switzerland–France). Part 2: Temporal evolution of heavy metals

The Bay of Vidy is the most contaminated area of Lake Geneva, Switzerland, as a result of the release of treated and untreated waste water from the municipal sewage treatment plant of the city of Lausanne and its surroundings. The reconstruction of the historical deposition of heavy metals in the sediment of the bay has been performed by the analysis of several dated (radiocaesium) sediment cores. The presence of sewage‐derived contaminants in the Bay of Vidy since the beginning of the sewage treatment plant's operations in 1964 is clearly observed, when a sharp increase in heavy metal contents is recorded, with maximum concentrations of cadmium, copper, zinc and lead occurring between the late 1960s and early 1970s. Despite considerable improvement in recent times, the present concentrations of the investigated heavy metals in sediments of the Bay of Vidy are still higher than concentrations measured at the centre of the lake, the latter close to Lake Geneva's natural background values. It is concluded that the quantity of heavy metals deposited in the bay is considerable and, because of sediment instability, will constitute a potential hazard for biota.