排序方式: 共有65条查询结果,搜索用时 93 毫秒
31.
利用BP人工神经网络将Ti2AlC/TiAl复合材料的快速热处理工艺参数(热处理温度,B的含量)-性能(显微硬度、弯曲强度),建立起关系网络模型。并通过BP神经网络,预测了Ti2AlC/TiAl复合材料在加入B元素和未加B元素的情况下的性能变化。研究表明:所建立的网络可以很好地反映出本材料的工艺-性能之间的关系,并且具有一定的精度,网络模型可以用来预测不同实验条件下Ti2AlC/TiAl复合材料的性能。加入B元素的Ti2AlC/TiAl复合材料的性能明显高于未加入B元素的。 相似文献
33.
34.
采用红外光谱、示差扫描量热分析等手段研究了氧化硼对铝硼硅酸盐玻璃结构及转变温度的影响,并用粉末法测试了玻璃的耐水性。结果发现,随着氧化硼含量增加,玻璃转变温度先降低后升高。玻璃与水反应初期受硼酸盐的水解动力学控制,后期主要为水分子对硅氧骨架的侵蚀和Ca2 与H 离子的离子交换过程。分析认为,引入少量的B2O3主要与碱性的CaO结合,生成含有非桥氧的端氧键B-O-Ca,破坏了玻璃网络结构,B2O3过量时,更多的硼酸盐基团与硅酸盐基团结合,生成桥氧键B-O-Si键,增强了玻璃结构。 相似文献
35.
利用放电等离子烧结(SPS)技术,原位制备了Ti2AlC/TiAl复合材料,研究了多步热处理对Ti2AlC/TiAl显微组织与力学性能的影响.结果表明,通过多步热处理,Ti2AlC/TiAl的力学性能得到明显改善.其中在1390℃热处理时,弯曲强度达到957.9 MPa,断裂韧性达到20.73 MPa·m1/2.通过多步热处理,可以得到双态组织和晶粒更为细小均匀的近y组织的TiAl基体,复合材料的断裂模式转变为穿晶解理断裂.在热处理过程中,Ti2AlC能够显著抑制TiAl基体中y晶粒和α2/y层片晶团的长大,并且在一定程度上,阻碍α2/y层片晶团的形成. 相似文献
36.
利用放电等离子烧结(SPS)技术,原位制备Ti2AlC/TiAl和Ti2AlC/TiAl(Nb,B)复合材料,并研究其在900℃和1000℃的高温氧化性能。研究发现,掺加Nb,B后复合材料的抗氧化性能明显提高,1000℃氧化30h时氧化层厚度为50μm~60μm,未掺入Nb,B时其厚度约为170μm。在氧化层和复合材料交界处结构疏松出现许多孔洞,Nb原子在高温时向表面层富集使复合材料抗氧化性能提高,富Nb层的存在即可以阻挡氧原子的继续渗入,又可以作为扩散障,减少Kirkendall效应;加入B后,组织明显细化,氧化反应初始阶段氧化物的形核增多。 相似文献
37.
By introducing other oxide materials (SiO2, Al2O3, CaO) into the red mud, all materials were melted into aluminosilicate glasses. On the basis of 17.2Fe2O3-5.7CaO-18.2Al2O3-50SiO2-5.9Na2O-3TiO2 system glasses, [Al2O3]/[CaO] mass ratio changed further. For each sample, the assignment of IR absorption bands for aluminosilicate glasses was investigated by Fourier transform infrared spectroscopy and the glasstransition temperature and high temperature molten state were studied by differential scanning calorimetry. According to X-Ray diffraction and differential scanning calorimetry, the behavior of crystallization was analyzed. The results show that the glass structures of three-dimensional network are depolymerized and the amount of non-bridging oxygens increases gradually with network modifier CaO replacing network intermediate Al2O3 when [Al2O3]/[CaO] ratio of aluminosilicate glass decreases from 4.05 to 0.66, resulting in decreasing density, melting temperature, crystallization peak temperature and glass-transition temperature. As [Al2O3]/[CaO] mass ratio decreases, the concentration of crystallized phase maghemite (γ-Fe2O3) will increase which provides the possibility for production of black glass-ceramic further. 相似文献
38.
39.
40.