An alternative gibbs-duhem method for the calculation of activities from the redox data for iron oxide in ternary oxide systems

An alternative approach is presented in this article for the calculation of the activity of FeO, Fe₂O₃, and the other component in ternary oxide slags when the redox behavior of iron oxides is known. The approach avoids the use of the “tangent intercepts” to the iso-oxygen activity curves as required in Schuhmann's method. Favorable comparisons were obtained for the systems of FeO-Fe₂O₃-CaO and FeO-Fe₂O₃-SiO₂ between the isoactivity curves derived using this method and those established in previous work using Schuhmann's method. Direct calculation of the free energy of mixing from the redox data is also possible. An example is given for the FeO-Fe₂O₂-CaO system.     

Haemolytic activity of Aeromonas species isolated in Libya

Twenty seven Aeromonas strains (5A. hydrophila, 8A. sobria and 14A. caviae) isolated from children with diarrhoea and 34 Aeromonas strains (9A. hydrophila, 7A. sobria an 18A. caviae) isolated from children without diarrhoea were tested from haemolysin production. The results obtained showed that haemolysin production using human, horse or sheep erythrocytes was significantly associated with A.hydrophila and A sobria but not with A.caviae, regardless of whether these strains were isolated from children with or without diarrhoea. Human or horse rather than sheep erythrocytes are recommended for use in the haemolysin assay.     

Fabrication of a biocompatible flexible electroosmosis micropump

In in-vivo microsystems, one of the components is a biocompatible micropump in order to produce the necessary force to deliver the fluid from the inlet to the outlet. In this contribution, a flexible micropump is fabricated which is aimed to be suitable in drug delivery applications. It provides high degree of biocompatibility, since the only employed materials are implantation grade polydimethylsiloxane elastomer and gold for the electrical interconnects. The working principle of the micropump is based on transverse DC electroosmosis which is a new variant of conventionally applied high voltage DC electroosmosis. This new technique is based on topography irregularities introduced in the channel resulting in a non-uniform charge distribution. The advantage is to drive the micropump using a relatively low DC voltage of 10 V while getting an effective flow speed of 60 μm/s. In order to characterize the flow speed, dyed 3 μm beads are dispersed in the working fluid and their speed is measured by the line scanning technique using a confocal microscope. It is also observed that the flow has a helical profile which is an attractive feature for an efficient micro-mixer in active microfluidics and μ-TAS applications.     

Ambient‐cured polyesteramide‐based anticorrosive coatings from linseed oil—A sustainable resource

Ambient‐cured polyesteramide (APEA) coating resin synthesized from dihydroxy fatty amide obtained from linseed oil, a sustainable resource, and poly(styrene‐co‐maleic anhydride), a bifunctional acid component, was found to exhibit improved physicomechanical and anticorrosive properties. The structural elucidation of APEA resin has been carried out by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopies. The physicomechanical and chemical resistance properties were investigated by standard methods. The corrosion resistance performance was evaluated in acid, alkali, and organic solvent. The thermal behavior was studied by TGA technique. A comparative study of these properties of APEA with reported baked polyesteramide (PEA) coatings was carried out. A remarkable improvement in the drying property of APEA was observed. The APEA coatings also showed improved physicomechanical and anticorrosive properties as compared to the baked PEA coatings. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1818–1824, 2005     

Multicast routing protocols in wireless mesh networks: a survey

Wireless mesh networks (WMNs) introduce a new type of network that has been applied over the last few years. One of the most important developing issues in WMNs is multicast routing, which is a key technology that provides dissemination of data to a group of members in an efficient way. In this article, after an introduction about the structure of a WMN, multicast routing algorithms and protocols in WMNs are surveyed in a detailed and efficient manner. Moreover, effort is made to scale the study into one of the important potential capabilities of multicast routing mechanisms in WMNs, which is taking advantage of using different channels and radios association. While nodes in a single-radio mesh network operating on single-channel have restrictions for capacity, equipping mesh routers with multiple radios using multiple channels can decrease the intention of capacity problem as well as increase the aggregate bandwidth available to the network and improving the throughput. Hence, the purpose of channel assignment is to decrease the interferences while increasing the network capacity and keeping the connectivity of the network. Therefore, this article investigates the multicast protocols considering a definition of three types of WMNs, based on channel-radio association including SRSC, SRMC and MRMC. In its follow, a classification for multicast routing algorithms regarding the achieved optimal solutions will be presented. Finally, a study of MRMC and its relevant problems will be offered, considering the joint channel assignment and the multicast tree construction problem.     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

Estimation of the minimum machining performance in the abrasive waterjet machining using integrated ANN-SA

In this study, Artificial Neural Network (ANN) and Simulated Annealing (SA) techniques were integrated labeled as integrated ANN-SA to estimate optimal process parameters in abrasive waterjet (AWJ) machining operation. The considered process parameters include traverse speed, waterjet pressure, standoff distance, abrasive grit size and abrasive flow rate. The quality of the cutting of machined-material is assessed by looking to the roughness average value (R_a). The optimal values of the process parameters are targeted for giving a minimum value of R_a. It was evidence that integrated ANN-SA is capable of giving much lower value of R_a at the recommended optimal process parameters compared to the result of experimental and ANN single-based modeling. The number of iterations for the optimal solutions is also decreased compared to the result of SA single-based optimization.     

Towards the performance evaluation of 4th generation wireless communication standards: LTE versus Mobile WiMAX

Advances in wireless communication protocols and networking toward support of the next generation of mobile and radio broadband technologies have contributed to a strong competition among various telecommunication standards in particular Long Term Evolution (LTE) and Mobile Worldwide Interoperability for Microwave Access (WiMAX). In this paper, we provide an in‐depth comparison analysis of LTE and Mobile WiMAX at the physical (PHY) layer by studying the most similar PHY configuration scenarios for these two technologies. Our study includes a throughput analysis of downlink (DL) and uplink (UL) transmissions in time division duplex with the least overhead possible and different antenna schemes as well as modulation and code rates. This study also performs an overhead analysis in both protocols to provide a more in‐depth understanding of the PHY layer capacity in various PHY layer configurations. Our simulation results generally show higher performance for LTE in both DL and UL transmission with 7 Mbps in DL and 5 Mbps in UL, when using one antenna port. However, by increasing the number of antennas for multiple‐input/multiple‐output configurations, the results illustrate a reduction in the performance of LTE compared to Mobile WiMAX. This arises from the increase in reference signal overhead in LTE from 4.7% in single‐input/single‐output (SISO) to 14.28% in 4 × 4 multiple‐input/multiple‐output (MIMO). Copyright © 2013 John Wiley & Sons, Ltd.     

Pruning deep convolutional neural networks for efficient edge computing in condition assessment of infrastructures

Health monitoring of civil infrastructures is a key application of Internet of things (IoT), while edge computing is an important component of IoT. In this context, swarms of autonomous inspection robots, which can replace current manual inspections, are examples of edge devices. Incorporation of pretrained deep learning algorithms into these robots for autonomous damage detection is a challenging problem since these devices are typically limited in computing and memory resources. This study introduces a solution based on network pruning using Taylor expansion to utilize pretrained deep convolutional neural networks for efficient edge computing and incorporation into inspection robots. Results from comprehensive experiments on two pretrained networks (i.e., VGG16 and ResNet18) and two types of prevalent surface defects (i.e., crack and corrosion) are presented and discussed in detail with respect to performance, memory demands, and the inference time for damage detection. It is shown that the proposed approach significantly enhances resource efficiency without decreasing damage detection performance.