Applications and Technologies of All-Solid State Blue Laser

1 Introduction Along with the matureness of laser diode (LD) manufacturing technology, the performance of LD has been improved greatly since 1980s, so various kinds of laser devices based on LD have been developed rapidly, especially the all-solid state lasers. After early experiments and researches, the all-solid state lasers have been commercialized successfully.     

高温预析出对Al-Zn-Mg系铝合金时效硬化和应力腐蚀的影响

研究了高温固溶后降温处理工艺对中强可使预析出LC52和7039铝合金的组织、时效硬化和应力腐蚀的影响。金相观察发现,高温预析出可优先在晶界处产生,并提高随后时效状态下晶界析出相的不连续分布程度,温度降低到一定程度晶内和晶界产生大量析出。合金拉伸性能和应力腐蚀结果表明,预析出在保持强度和塑性的同时,可提高抗应力腐蚀性能。而预析出温度降低,合金强度呈下降趋势。     

镍氢电池负极用低成本储氢合金的研究

研究了ABS型储氢合金在低Co含量条件下，随B组元替代元素Co，Al，Si等含量的变化对合金电化学性能的影响规律，同时研究了A组元中不同La／Ce比对合金电化学性能的影响情况。结果表明，随合金中Co含量的降低，合金的活化性能和放电容量得以改善，但合金的循环寿命下降也比较明显；在试验范围内，随Al元素的加入，合金的循环寿命得以改善，但材料的放电容量和活化性能均有所下降；随合金La／Ce比的降低，合金的放电容量略有下降，但其循环寿命和放电电压平台有较大提高。     

片状陶瓷材料高低温电性能参数的自动检测

由进口电性能仪配上自制的高温系统，计算机自动采集数据，配置成一套高低温电性参数测定装置，该装置的特点是，升温快，炉体小巧，炉芯可更换盛液氮装置，屏蔽良好，等温区长，温工及参数测量精确可靠。     

3#大布袋收尘器更新改造方案的探讨

通过对3^#大布袋收尘器更新改造方案的对比分析，探讨适合工艺条件的最佳收尘器的选择途径。     

以杂多酸为催化剂合成乙二醇-乙醚的研究

研究了杂多酸催化无水乙醇和环氧乙烷(EO)制备乙醇乙醚的醚化反应,考察了不同种类的杂多酸以及醚化反应工艺条件对反应活性和选择性的影响.结果表明,PW_(12)催化剂的反应活性高、反应温度低、选择性好,当用PW_(12)作催化剂,乙醇与环氧化乙烷之比为3.0(mol),反应温度45℃,反应时间1h时,转化率和选择性均超过97%.     

热力系统节能技术改造方案介绍

针对热电厂热力系统存在的浪费能源和设计不合理现象作了浅析 ,介绍了几种对热力系统进行改造的方案 ,并对取得的经济效益进行了计算。     

基于非确定性思考下的城市规划新思维探讨

通过对城市规划编制与实施过程中的问题分析，提出非确定性城市规划思想的理念以及非确定性规划思想与确定性规划思想的差别，并在分析非确定性规划思想内涵的基础上，提出非确定性规划思想指导下的城市规划的新程式。     

Electromagnetic properties of ferroelectric-ferrite ceramic composites

The NiFe₂O₄ and Pb(Zr_0.52Ti_0.48)O₃ ceramic composites are prepared by conventional solid state reaction method. The microstructural and morphological properties of the composites are studied by X-ray diffraction analysis and scanning electron microscopy. Results indicate that the ferrite and piezoelectric phases can co-exist in the composites. The relationship between the dielectric constant and frequency (40 Hz–40 MHz) as well as temperature is also investigated. It is noted that the transition temperature of the composites is about 380 °C. A double electric hysteresis loop is observed in our composites. The magnetic properties are relatively weak according to the magnetic hysteresis loop. With increase in the content of the ferrite phase, the permeability increases. The electromagnetic properties of the as-prepared composites are tunable according to the content of the NiFe₂O₄ phase.