Structural Phase Transformations of ZnS Nanocrystalline Under High Pressure

In-situ energy dispersive x-ray diffraction on ZnS nanocrystalline was carried out under high pressure by using a diamond anvil cell. Phase transition of wurtzite of 10nm ZnS to rocksalt occurred at 16.0GPa, which was higher than that of the bulk materials. The structures of ZnS nanocrystalline at different pressures were built by using materials studio and the bulk modulus, and the pressure derivative of ZnS nanocrystalline were derived by fitting the equation of Birch-Murnaghan. The resulting modulus was higher than that of the corresponding bulk material, which indicates that the nanomaterial has higher hardness than its bulk materials.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

高温高压下β相硼的电导率测量

 硼在高压下具有复杂的结构和多样的物理性质,对其结构和性质的深入研究具有很重要的意义,一直引起理论和实验研究领域的关注。高压下进行电学性质测量是获得物质物理性质的有效手段,利用集成在金刚石对顶砧上的微电路,在高压下和两个不同温度范围内对β相硼进行了电导率测量,分析了导电机制随压力的变化规律。在0～28.1 GPa范围内,β相硼的电导率随着压力的增大是逐渐增大的,卸压后样品的电导率不能回到最初的状态,是一个不可逆的变化过程;由室温到423 K的范围内,β硼的电导率随着温度的不断增加有明显的上升趋势,并且随着压力的升高,电导率变化逐渐加快。此外,对样品在14.5 GPa和18.6 GPa压力下,用溅射到金刚石对顶砧上的氧化铝薄膜做绝热层,对样品进行了激光加热实验,最高温度达到2 224 K,电导率随着温度的上升而增大,结果显示,β相硼的电学特征仍然属于半导体的特征范围内。     

ACB三嵌段粒子分级自组装的布朗动力学研究

利用布朗动力学方法研究了ACB三嵌段粒子的分级自组装过程.由第一级组装得到的结构作为第二级组装的初始构型,通过调控体系中补丁B部分的吸引强度和补丁粒子的浓度,研究了第二级组装过程中形成有序结构的影响因素.通过设计组装模型、组装规则和组装路线,得到了蜂巢状网络结构和金刚石状结构.结果表明,在较高的吸引强度和适当的浓度下,可以得到更多且更规整的蜂巢状结构;较高和较低的吸引强度和浓度都不利于金刚石状结构的形成.     

Mn3Zn0.8Ni0.2N的高压同步辐射研究

 利用金刚石对顶压砧,对钙钛矿型金属锰化物Mn₃Zn_0.8Ni_0.2N进行了原位高压同步辐射角散X射线衍射研究。研究表明,在0~29.9 GPa的压力区间内,样品没有发生结构相变,因而在该压力下样品的物性变化并非由结构相变所导致。卸压以后,样品的特征峰都回到了初始位置。通过Birch-Murnaghan方程,拟合得到了样品的体弹模量为86.5 GPa。     

基础理论纵贯化学学科:吉林大学“统计力学与分子模拟”课程建设*

化学的基础理论的演进不断重塑着化学学科。传统的教学体系所依据的理论范式落后于现代化学理论的发展。吉林大学化学学院面向本科学生开设了“统计力学与分子模拟”课程。针对吉林大学本科学生的特点,精心安排了教学内容,通盘考虑知识体系的衔接,优化了教学方法。同时,淬炼了课程中的思政元素,从而在思想、道德、知识等3个方面进一步提升学生的综合素质。     

不同粒径纳米晶硫化锌的高压结构相变研究

 应用原位能量色散X射线散射和金刚石对顶砧技术,对纳米晶ZnS进行了高压结构相变研究。初始相为纤锌矿结构的10 nm和3 nm硫化锌分别在16.0 GPa和16.7 GPa时转变为岩盐矿结构,相变压力均高于纤锌矿结构的体材料硫化锌。该相变为一可逆的结构相变。应用大型科学计算软件Materials Studio（MS）计算了纳米晶ZnS的状态方程,根据Birch-Murnaghan方程拟合了纳米晶ZnS的零压体模量,得到的零压体模量高于相应体材料的零压体模量,表明纳米晶ZnS较难压缩。     

层状钙钛矿结构锰氧化物Ca3Mn2O7的压致结构相变

采用金刚石压砧高压装置(DAC),对层状钙钛矿结构锰氧化物Ca     

Compression Behaviour of Ni77P23 Amorphous Alloy up to 30.5 GPa

The compression behaviour of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using in-situ high pressure energy dispersive x-ray diffraction with a synchrotron radiation source. The equation of state is determined by fitting the experimental data according to the Birch-Murnaghan equation. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa. Within the pressure range from zero to the experimental one, the pressure-induced structural relaxation is reversible.     

High-Pressure Phase Transitions of Cubic Y_2O_3 under High Pressures by In-situ Synchrotron X-Ray Diffraction

High-pressure phase transitions of cubic Y_2O_3 are investigated using in situ synchrotron x-ray diffraction in a diamond anvil cell up to 36.3 GPa. The pressure-induced phase transitions of cubic Y_2O_3, which display apparent inconsistencies in previous studies, are verified to be from a cubic phase to a monoclinic phase and further to a hexagonal phase at 11.7 and 21.6 GPa, respectively. The hexagonal Y_2O_3 displays noticeable anisotropic compressibility due to its layered structure and it is stable up to the highest pressure in the present study. A third-order Birch–Murnaghan fit based on the observed pressure-volume data yields zero pressure bulk moduli of180(3), 196(7) and 177(7) GPa for cubic, monoclinic and hexagonal phases, respectively.