Mechanical,electrical, and thermal expansion properties of carbon nanotube-based silver and silver-palladium alloy composites

The mechanical, electrical, and thermal expansion properties of carbon nanotube（CNT）-based silver and silver–palladium（10：1, w/w） alloy nanocomposites are reported. To tailor the properties of silver, CNTs were incorporated into a silver matrix by a modified molecular level-mixing process. CNTs interact weakly with silver because of their non-reactive nature and lack of mutual solubility. Therefore, palladium was utilized as an alloying element to improve interfacial adhesion. Comparative microstructural characterizations and property evaluations of the nanocomposites were performed. The structural characterizations revealed that decorated type-CNTs were dispersed, embedded, and anchored into the silver matrix. The experimental results indicated that the modification of the silver and silver–palladium nanocomposite with CNT resulted in increases in the hardness and Young＇s modulus along with concomitant decreases in the electrical conductivity and the coefficient of thermal expansion（CTE）. The hardness and Young＇s modulus of the nanocomposites were increased by 30%？40% whereas the CTE was decreased to 50%-60% of the CTE of silver. The significantly improved CTE and the mechanical properties of the CNT-reinforced silver and silver–palladium nanocomposites are correlated with the intriguing properties of CNTs and with good interfacial adhesion between the CNTs and silver as a result of the fabrication process and the contact action of palladium as an alloying element.     

Stability analysis of a class of digital filters utilizing single saturation nonlinearity

A novel criterion for the global asymptotic stability of a class of digital filters utilizing single saturation nonlinearity is presented. An example showing the effectiveness of the present criterion is given.     

Modified criterion for global asymptotic stability of fixed-point state-space digital filters using two’s complement arithmetic

A criterion for the global asymptotic stability of fixed-point state-space digital filters using two’s complement arithmetic is presented. The criterion is a modified form of a well-known criterion due to Mills, Mullis, and Roberts. The criterion is in the form of linear matrix inequality and, hence, computationally tractable. An example shows the effectiveness of the modified criterion.     

Quantification of crustal geotherms along with their error bounds for seismically active regions of India: A Matlab toolbox

Determination of the thermo-mechanical structure of the crust for seismically active regions using available geophysical and geological data is of great importance. The most important feature of the intraplate earthquakes in the Indian region are that the seismicity occurs within the entire crust. In Latur region of India an earthquake occurred in the upper crust. In such situations, quantifying the uncertainties in seismogenic depths becomes very important. The stochastic heat conduction equation has been solved for different sets of boundary conditions, an exponentially decreasing radiogenic heat generation and randomness in thermal conductivity. Closed form analytical expressions for mean and variance in the temperature depth distribution have been used and an automatic formulation has been developed in Matlab for computing and plotting the thermal structure. The Matlab toolbox presented allows us to display the controlling thermal parameters on the screen directly, and plot the subsurface thermal structure along with its error bounds. The software can be used to quantify the thermal structure for any given region and is applied here to the Latur earthquake region of India.     

Securing communication using function extraction technology for malicious code behavior analysis

Since computer hardware and Internet is growing so fast today, security threats of malicious executable code are getting more serious. Basically, malicious executable codes are categorized into three kinds – virus, Trojan Horse, and worm. Current anti-virus products cannot detect all the malicious codes, especially for those unseen, polymorphism malicious executable codes. The newly developed virus will create the damages before it has been found and updated in database. The basic idea of the proposed system is, it will analyze the behavior of the malicious codes and based on the behavior signature of the malicious code content filtering mechanism will be used to filter out contents, so that, the system will be secured from the future communication processes. The behavior of the code is analyzed using the function extraction technology. The function extraction technology will replace the function codes into algebraic expressions. Based on the behavior of the malicious codes, it will be categorized into different kinds of malicious codes. The detected malicious code will be prevented from execution. Based on the type of malicious code, appropriate security mechanism will be used for further communication.     

Nondestructive Brix Evaluation of Apples of Different Origin Using Near Infrared (NIR) Filter Based Reflectance Spectroscopy

Abstract

A filter based near infrared (NIR) technique to evaluate Brix value, in a non destructive way, of Indian apples, along with apples from other countries, has been investigated here. Reflectance characteristics at ten NIR wavelengths were recorded by in-house developed probe for five Indian varieties and four imported varieties. A separate calibration and validation set for each variety was formed. Brix values of the calibration and validation sets of apples were evaluated with a refractometer from Bellingham and Stanley, Model 840. Principal component regression was used to generate calibration and prediction of Brix for the validation set. It was found that Brix values of all varieties of apples can be predicted with a standard error of prediction, 0.7322–1.7809, while root mean square error is also in the same range. It was further noticed that reduction in data recording wavelength leads to an increase in SEP and RMSE.     

Optimization of a plate-fin heat exchanger design through an improved multi-objective teaching-learning based optimization (MO-ITLBO) algorithm

Teaching-learning-based optimization (TLBO) is a recently developed heuristic algorithm based on the natural phenomenon of teaching-learning process. In the present work, multi-objective improved teaching-learning-based optimization (MO-ITLBO) algorithm is introduced and applied for the multi-objective optimization of plate-fin heat exchangers. The basic TLBO algorithm is improved to enhance its exploration and exploitation capacities by introducing the concept of number of teachers, adaptive teaching factor, tutorial training and self-motivated learning. The MO-ITLBO algorithm uses a grid-based approach to adaptively assess the non-dominated solutions maintained in an external archive. Minimizing total annual cost and the total weight of heat exchanger as well as minimization of total pressure drop and maximization of heat exchanger effectiveness for specific heat duty requirement are considered as objective functions. Two application examples are presented to demonstrate the effectiveness and accuracy of the proposed algorithm.     

Alkaline hydrolysis of the cyclic nitramine explosives RDX,HMX, and CL-20: new insights into degradation pathways obtained by the observation of novel intermediates

Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX, I) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) hydrolyze at pH > 10 to form end products including NO2-, HCHO, HCOOH, NH3, and N2O, but little information is available on intermediates, apart from the tentatively identified pentahydro-3,5-dinitro-1,3,5-triazacyclohex-1-ene (II). Despite suggestions that RDX and HMX contaminated groundwater could be economically treated via alkaline hydrolysis, the optimization of such a process requires more detailed knowledge of intermediates and degradation pathways. In this study, we hydrolyzed the monocyclic nitramines RDX, MNX (hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine), and HMX in aqueous solution (pH 10-12.3) and found that nitramine removal was accompanied by formation of 1 molar equiv of nitrite and the accumulation of the key ring cleavage product 4-nitro-2,4-diazabutanal (4-NDAB, O2NNHCH2NHCHO). Most of the remaining C and N content of RDX, MNX, and HMX was found in HCHO, N2O, HCOOH, and NH3. Consequently, we selected RDX as a model compound and hydrolyzed it in aqueous acetonitrile solutions (pH 12.3) in the presence and absence of hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to explore other early intermediates in more detail. We observed a transient LC-MS peak with a [M-H] at 192 Da that was tentatively identified as 4,6-dinitro-2,4,6-triaza-hexanal (O2NNHCH2NNO2CH2NHCHO, III) considered as the hydrolyzed product of II. In addition, we detected another novel intermediate with a [M-H] at 148 Da that was tentatively identified as a hydrolyzed product of III, namely, 5-hydroxy-4-nitro-2,4-diaza-pentanal (HOCH2NNO2CH2NHCHO, IV). Both III and IV can act as precursors to 4-NDAB. In the case of the polycyclic nitramine 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20), denitration (two NO2-) also led to the formation of HCOOH, NH3, and N2O, but neither HCHO nor 4-NDAB were detected. The results provide strong evidence that initial denitration of cyclic nitramines in water is sufficient to cause ring cleavage followed by spontaneous decomposition to form the final products.     

PLA/functionalized‐gum arabic based bionanocomposite films for high gas barrier applications

The present work focuses on the microwave synthesis of lactic acid‐grafted‐gum arabic (LA‐g‐GA) by polycondensation reaction and its influence as an additive to improve the gas barrier properties of poly(lactic acid) (PLA) films, prepared by solution casting method. It is observed that during the synthesis of LA‐g‐GA, hydrophilic gum is converted into hydrophobic due to grafting of in situ grown hydrophobic oligo‐(lactic acid). Subsequently, PLA/LA‐g‐GA bionanocomposite films are fabricated and characterized for structural, thermal, mechanical and gas barrier properties. Path breaking reduction in oxygen permeability (OP) of ～10 folds is achieved in case of PLA films containing LA‐g‐GA as filler. However, water vapor transmission rate (WVTR) is reduced up to 27% after 5 wt % addition of filler. Reduction in OP of this order of magnitude enables the PLA to compete with PET in term of enhancing shelf life and maintaining the food quality. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43458.