Electrical and magnetic properties of lithium borate glass containing iron

Journal of Materials Science Letters -     

Effect of doping polyacrylic acid with some dopants as studied by different techniques

The molecular weight of polyacrylic acid (PAA) was determined by a viscometric method using NaNO₃ as solvent at 30°C. The specific electric conductivities (σ) of PAA as well as PAA doped with carbon black (CB), chromium oxide (Cr₂O₃), and cupferron with different concentrations (from 0.25 to 1 wt %) were measured at a temperature range 360–400 K. IR spectra of some polymers were determined and it was shown that when PAA was doped with 0.5 wt % CB, a C? O? C band appeared at 775–875 cm^?1. The positron annihilation lifetime (PAL) spectra in PAA doped with the above‐mentioned dopants were measured as a function of their concentrations. It was observed that the short lifetime intensity I₁ decreased, whereas the intermediate lifetime intensity I₂, which is related to the conductivity of the material, increased with increasing the wt % of Cr₂O₃ and cupferron as well as at low concentrations of CB. These results are discussed in terms of the conducting island model. It was found that there were distinct positive relationships between σ and I₂. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 877–883, 2002; DOI 10.1002/app.10381     

An isogeometrical approach to structural topology optimization by optimality criteria

The Isogeometric Analysis (IA) method is applied for structural topology optimization instead of finite elements. For this purpose, a control point based Solid Isotropic Material with Penalization (SIMP) method is employed and the material density is considered as a continuous function throughout the design domain and approximated by the Non-Uniform Rational B-Spline (NURBS) basis functions. To prevent the formation of layouts with porous media, a penalization technique similar to the SIMP method is used. For optimization an optimality criteria is derived and implemented. A few examples are presented to demonstrate the performance of the method. It is shown that, dissimilar to the element based SIMP topology optimization, the resulted layouts by this method are independent of the number of the discretizing control points and checkerboard free.     

The specific enthalpy of fracture for beta Ti-15-3 alloy

Fatigue crack propagation (FCP) experiments were conducted on beta Ti-15-3 alloy under various loading conditions to examine the constancy of the specific enthalpy for fracture, advanced by the Crack Layer (CL) theory as a material parameter characteristic of its intrinsic toughness. The energy release rate and the irreversible work were determined from load-displacement curves during crack propagation. Microscopic and diffraction analyses were conducted to identify the damage mechanisms ahead of the crack tip. A damage zone whose geometry exhibited plane strain character at the initial stage of crack propagation was observed optically. The damage zone transformed into plane stress configuration when the crack reached half its critical length. Damage mechanisms involved slip lines and microcracking which is believed to ensue from intense accumulation of slip processes. The magnitude of microcracking became more weighty as the crack moved deeper into plane stress dominance. The damage preceding crack advance was quantitatively assessed as the crack resistance moment which is the volume of transformed material per unit crack extension. Application of the CL theory to the data generated under a wide range of applied stress levels gave rise to a constant value of the specific enthalpy of fracture, 20 MJ/m³. This value is in close agreement with the specific energy of slip lines computed from microstructural considerations.     

Finite-time coordination in multiagent systems using sliding mode control approach

Finite-time stability in dynamical systems theory involves systems whose trajectories converge to an equilibrium state in finite time. In this paper, we use the notion of finite-time stability to apply it to the problem of coordinated motion in multiagent systems. Specifically, we consider a group of agents described by fully actuated Euler–Lagrange dynamics along with a leader agent with an objective to reach and maintain a desired formation characterized by steady-state distances between the neighboring agents in finite time. We use graph theoretic notions to characterize communication topology in the network determined by the information flow directions and captured by the graph Laplacian matrix. Furthermore, using sliding mode control approach, we design decentralized control inputs for individual agents that use only data from the neighboring agents which directly communicate their state information to the current agent in order to drive the current agent to the desired steady state. Sliding mode control is known to drive the system states to the sliding surface in finite time. The key feature of our approach is in the design of non-smooth sliding surfaces such that, while on the sliding surface, the error states converge to the origin in finite time, thus ensuring finite-time coordination among the agents in the network. In addition, we discuss the case of switching communication topologies in multiagent systems. Finally, we show the efficacy of our theoretical results using an example of a multiagent system involving planar double integrator agents.     

Accelerated iterative methods for finding solutions of nonlinear equations and their dynamical behavior

In this paper, we present a family of optimal, in the sense of Kung–Traub’s conjecture, iterative methods for solving nonlinear equations with eighth-order convergence. Our methods are based on Chun’s fourth-order method. We use the Ostrowski’s efficiency index and several numerical tests in order to compare the new methods with other known eighth-order ones. We also extend this comparison to the dynamical study of the different methods.     

Synthesis and characterization of hydrophilic nanocomposite coating on glass substrate

Hydrophilic coatings based on 3‐glicidoxy propyl trimethoxy silane (GPTMS) and polyethylene glycol (PEG) were prepared with the incorporation of tetramethoxysilane (TMOS) and silica nanoparticle colloidal suspension by a sol–gel process. Characterization of the coatings has been performed by Fourier Transform Infrared (FTIR) and Attenuated Total Reflectance Infrared (ATR‐IR) techniques. Morphological properties were characterized by Scanning Electron Microscopy (SEM). The distribution of Si atoms in the hybrid system was obtained by Si mapping. The particle size in sol solution of the coating was measured by light scattering analyzer. Optical properties were characterized by using UV–vis spectrophotometer. The hydrophilicity of the coating was determined by contact angle measurements, and also the results have been confirmed by surface energy and water uptake investigations. The obtained results indicate that the surfactants affected the contact angles remarkably but did not change the transparency. It has been found that applying silica nano particles leads to coatings with different properties than those using TMOS, while siloxane contents were the same in these two set of coatings. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5322–5329, 2006     

Thermodynamics of ionic-association in aqueous solutions of Ca and Mg organic salts using ion-selective electrode technique—II. benzoate, o-toloate, o-chlorobenzoate and salycylate

The stoichiometric association constants, K, the thermodynamic association constant, K_A, and the other thermodynamic parameters such as ΔS°, ΔH° and ΔG° for the association between each of the Ca and Mg ions with benzoate, o-toloate, o-chlorobenzoate and salycylate have been determined at 25°C, 35°C and 45°C in aqueous media. Ion-selective electrode technique has been used in the measurements of Ca and Mg ion activitiesThe trend of association behavior of both Ca and Mg aromatic salts could not be explained on the basis of pK_a of the mother organic acids but could be explained based on the trend of Hammet function σ of these salts themselves relative to the corresponding benzoate salt.     

Graft polymerization of acrylic acid onto starch using potassium permanganate acid (redox system)

Graft polymerization of acrylic acid (AA) onto rice starch using postassium permanganate/acid redox system as initiator was investigated. When starch was reacted with KMnO₄ solution, MnO₂ was deposited onto starch. The dependence of MnO₂ amount deposited was directly related to KMnO₄ concentration. Subjecting the MnO₂-containing starch to a solution consisting of monomer (AA) and acid (citric, tartaric, oxalic and hydrochloric acid) formed poly(AA)–starch graft copolymers. The graft yield, expressed as meq COOH/100 g starch, was measured by the amount of MnO₂ deposited, AA concentration, material-to-liquor ratio, kind and concentration of acid, as well as temperature and duration. Finally, the newly prepared poly(AA)–starch graft copolymers were applied to cotton textiles to determine their suitability as sizing agents. The highest graft yield was obtained with citric acid and the least with hydrochloric acid, with tartaric and oxalic acid in between. The graft yield increased by increasing the concentration of acid to a certain concentration beyond which grafting leveled off. A similar trend was observed when the magnitude of grafting was related to the amount of MnO₂ deposited. The graft yield increased by increasing the polymerization temperature from 30° to 50°C. Increasing the temperature to 60°C is accompanied by decreased grafting. On the other hand, fabric samples sized with poly(AA)–starch graft copolymers acquire higher tensile strength, elongation at break, and abrasion resistance than that sized with native rice starch, i.e., poly(AA)–starch graft copolymers serve as good sizing agents for cotton textiles. A tentative mechanism for grafting rice starch with AA using the KMnO₄/acid redox system was elucidated. © 1995 John Wiley & Sons, Inc.     

Coronavirus disease 2019 (COVID-19): survival analysis using deep learning and Cox regression model

Pattern Analysis and Applications - Coronavirus (COVID-19) is one of the most serious problems that has caused stopping the wheel of life all over the world. It is widely spread to the extent that...