Use of citric acid for heavy metals extraction from contaminated sewage sludge for land application.

Recent studies revealed that organic acids such as citric and oxalic acids seemed to be more promising as chemical extracting agents for removal of heavy metals from contaminated sludge, since they are biodegradable and can attain a higher metal extraction efficiency at mildly acidic pH compared to other extracting agents. Results of a lab-scale study on the efficiency of citric acid in the extraction of chromium (Cr), copper (Cu), lead (Pb), nickel (Ni) and zinc (Zn) from anaerobically digested sludge, revealed that citric acid seemed to be highly effective in extracting Cr (at 100%), Cu (at 88%), Ni (at 98%) and Zn (at 100%) at pH 2.33, mostly at 5 days leaching time except for Cu and Zn, which are at 1 day and 2 h contact times respectively. Lead removal at the same pH was also high at 95% but at a longer leaching time of 11 days. At pH 3, citric acid seemed to be highly effective in extracting Pb (at 100%) at 1 day leaching time, although higher removals were also attained for Ni (70%) and Zn (80%) at only 2 h leaching time. Chemical speciation studies showed that Cr, Cu and Ni in the sludge sample seem to predominate in residual fractions, while Pb and Zn were found mostly bound to organic and inorganic matter forms, hence the potential of the sludge for land application.     

PCR-based procedures in detection and DNA-fingerprinting of Salmonella from samples of animal origin

The usefulness of selected PCR-protocols for the detection of Salmonella in 117 samples of animal origin (17 raw minced meat, 27 raw chicken meat, 8 raw sausages, and 25 egg samples, as well as 18 poultry faecal, and caecal swabs samples) and DNA-fingerprinting typing is shown. To establish an accurate PCR-procedure for Salmonella detection the following parameters were evaluated: two pre-PCR concentration procedures, centrifugation and immunomagnetic separation (IMS) using Dynabeads anti- Salmonella; the specificity and sensitivity of 10 sets of primers; and different conditions of the amplification reaction. In light of the results obtained from the use of PCR-based procedures alone or in combination with conventional methods, the following findings can be underlined: First, IMS is more efficient than centrifugation in the recovery of Salmonella. Second, the selected IMS/PCR-detection protocol is less time-consuming (45 h) than the IMS/culture procedure (90 h), and a good concordance between them was found when the Kappa coefficient was calculated (0·87). Third, PCR-ribotyping technique showed a very low discrimination power, being able to differentiate only three profiles. Fourth, RAPD technique using specific primers supports previous works in which it was proposed as a simple and useful tool for discriminating isolates between and within serotypes. Fifth, The efficiency, rapidity, and flexibility of the PCR-protocols applied were high, and they can be performed using two PCR-programs and the same basic equipment.     

Analysis of the essential oil of Mexican oregano (Lippia graveolens HBK)

The composition of the volatile oil of Mexican oregano (Lippia graveolens HBK) isolated by steam distillation was investigated by means of column chromatography, gas chromatography and mass spectrometry. A total of 33 components were identified including 22 hydrocarbons, 4 alcohols, 4 ethers, 2 phenols and 1 ketone. Of the 33 components observed in the present study 7 were identified in Mexican oregano for the first time.     

Rheological and drug‐release behaviour of a scleroglucan gel matrix at different drug loadings

The aim of this study was to investigate the drug‐loading effects on release and mechanical properties of a scleroglucan gel, with the intention of considering them in delivery systems formulations. The rheological and kinetic properties of a 2 % w/w scleroglucan gel matrix loaded with 0, 0.02, 0.04, 0.06, 0.2 and 0.4 % w/w of theophylline (Th, used as a model drug) were investigated. Rheological measurements were performed in a controlled‐stress rotational‐shear rheometer under isothermal conditions. For theophylline release from the gel a flat Franz cell was used and the kinetic parameters were derived applying a semi‐empirical power law. The influence of scleroglucan molar weight on kinetic and rheological behaviour was also studied. Results suggest two possible effects of drug loading on the gel network: in the 0.04–0.06 % w/w Th range a plasticizing effect and in the 0.2–0.4 % w/w Th range a rigidization effect. In the first range mentioned, the changes in the gel structural properties tested by means of rheological measurements are coincident with changes in drug‐release kinetics. Copyright © 2005 Society of Chemical Industry     

Retaining maximum antioxidative potency of wheat germ oil refined by molecular distillation

A process of physical refining wheat germ oil using the technique of molecular distillation (MD) is presented in this work. Wheat germ oil was obtained from the germ by solvent extraction using hexane and also by cold pressing. The oil extracted with hexane was degummed and bleached before deacidification in order to modify the parameters of phosphorus and color. The goal in carrying out the stage of physical refining by MD was to preserve the maximum amount of original antioxidative potential obtained from extraction of the crude oil. The effect of evaporation temperature of one‐stage MD on the efficiency of free fatty acid elimination was studied. The antioxidant portion was followed by means of analytic determination of tocopherols by high‐performance liquid chromatography. Tocopherol retention up to 98% was achieved in the oil extracted by pressing, and yields of up to 96% were achieved in the oil extracted with hexane. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of functional gradient copolymers of glycidyl methacrylate and butyl acrylate

Epoxy-functional spontaneous gradient copolymers of glycidyl methacrylate (G) and n-butyl acrylate (B) were synthesized via atom transfer radical polymerization (ATRP). The copolymerization reactions were carried out in toluene solution at 70 °C, using methyl 2-bromopropionate (MBrP) as initiator and copper chloride with N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as the catalyst system. The kinetic behaviour of the statistical copolymerizations was studied in a wide composition interval with molar fractions of G ranging from 0.10 to 0.75. The synthesized copolymers were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. ¹H NMR was employed to determine the copolymer composition, demonstrating the gradient character of the copolymers along the main chain in the whole monomer conversion interval. Apart from this, the sequence distribution and stereoregularity were analyzed. These microstructural experimental data agreed well with those calculated from Mayo-Lewis terminal model (MLTM) and a Bernoullian statistic with an isotacticity parameter of σ_G = 0.28 and a coisotacticity parameter of σ = 0.30.     

Local staging with CT of tumors of the upper urothelium

OBJECTIVE: To evaluate the ability of computerized tomography (CT) to stage transitional cell carcinoma of the upper urinary tract. METHODS: 29 transitional cell carcinoma of the upper urinary tract submitted to nephroureterectomy were retrospectively evaluated. All 29 tumors had preoperative CT scans performed to stage the lesion. The pathological staging was compared to that of CT. RESULTS: 10 of the 29 tumors had CT evidence of tumor extension and 19 had localized noninvasive tumor on CT. Of the 10 patients with CT findings of tumor extension, 2 (20%) had superficial tumors and 8 (80%) had tumors that invaded into the adventitial fat, renal parenchyma or perirenal fat (pT3, pT4). Of the 19 patients with localized noninvasive tumor on CT, 13 (68%) had superficial tumors and 6 (32%) had pT3 or pT4 tumors. CT sensitivity for tumor invasion was 57% with a specificity of 87.5%. CONCLUSIONS: Our analysis shows that CT is of limited value in staging these tumors. When CT demonstrates direct tumor extension through the renal pelvic or ureteral wall, it is a sensitive indicator of high-stage tumor. However, the results obtained in low stage tumors must be viewed with caution.     

Effect of Crude Oil Composition and Blending on Flowing Properties

The effect of crude oil n-paraffin molecular weight distribution on wax crystallization risk was studied. Sixteen highly paraffinic crude oils from Eastern Venezuela were characterized, in terms of hydrocarbon family distribution, by High Temperature Simulate Distillation (HTSD), Gel Permeation Chromatography (GPC), and wax content. n-Paraffin chain length was correlated with crude oil cloud point and pour point. It was demonstrated that high molecular weight linear paraffins are responsible for crude oil wax precipitation. A quantitative correlation between molecular weight distribution and crude oil flowing properties was also obtained. It was found that the wider the molecular weight distribution, the lower is the wax crystallization risk. Blends of different paraffinic crude oils were prepared and their flowing properties were evaluated in comparison with the original crudes. Cloud points below the mean value were obtained. In some cases, a synergistic effect was observed (cloud points below the minimum of the two crude oils). Blends of some of these crudes with condensates afforded improvements on crude oil flow and a reduction of wax crystallization tendency (cloud point). This phenomenon can be attributed to a combination of two factors: I. increases in C24-n-paraffins, and II. a wider molecular weight distribution.