The impact of micro‐ and macroergonomics considerations on appropriate technology transfer decisions in developing countries: The case of Turkey

The research presented in this paper aims to support the decision process of appropriate technology transfer to industrially developing countries by improving a broader understanding of relationships between the key micro‐ and macroergonomics factors and the technology alternatives. The methodology involves knowledge acquisition, identifying and categorizing a holistic set of key criteria about technology transfer with respect to ergonomics. This work attempts briefly to identify factors affecting the success of technology transfer in order to reduce the potential of incompatibilities with respect to micro‐ and macroergonomics and to optimize the decision process of managers. The objective of the decision model, based on the analytic hierarchy process (AHP), determines the global priority weights for different technology alternatives and examines the critical factors and benefits, which affect the appropriateness of technology transfer. © 2007 Wiley Periodicals, Inc. Hum Factors Man 17: 1–19, 2007.     

An enzymeimmunoassay for total thyroxine using avidin-biotin separation system and thyroxine-peroxidase conjugate

An avidin-biotin enzymeimmunoassay for total thyroxine in serum is described. Avidin was adsorbed to biotinylated bovine serum albumin coated tubes prepared with glutaraldehyde as coupling agent. In the enzymeimmunoassay, affinity purified biotinylated anti-thyroxine IgG, sample or standards, and thyroxine-horseradish peroxidase were simultaneously added to the avidin coated tubes. The bound enzymatic activity was then measured with o-phenylenediamine and H2O2. Results showed that the assay has good precision (within-assay CV% less than 10% and between assay 11.7% in hypo- and 6.9% in hyperthyroid range), good assay range (0-800 nmol/L), good sensitivity (4 nmol/L), and can be performed in 2.5 hours. The results obtained correlate well (r = 0.93) with those of an RIA.     

Accurate Receptor-Ligand Binding Free Energies from Fast QM Conformational Chemical Space Sampling

Small molecule receptor-binding is dominated by weak, non-covalent interactions such as van-der-Waals hydrogen bonding or electrostatics. Calculating these non-covalent ligand-receptor interactions is a challenge to computational means in terms of accuracy and efficacy since the ligand may bind in a number of thermally accessible conformations. The conformational rotamer ensemble sampling tool (CREST) uses an iterative scheme to efficiently sample the conformational space and calculates energies using the semi-empirical ‘Geometry, Frequency, Noncovalent, eXtended Tight Binding’ (GFN2-xTB) method. This combined approach is applied to blind predictions of the modes and free energies of binding for a set of 10 drug molecule ligands to the cucurbit[n]urils CB[8] receptor from the recent ‘Statistical Assessment of the Modeling of Proteins and Ligands’ (SAMPL) challenge including morphine, hydromorphine, cocaine, fentanyl, and ketamine. For each system, the conformational space was sufficiently sampled for the free ligand and the ligand-receptor complexes using the quantum chemical Hamiltonian. A multitude of structures makes up the final conformer-rotamer ensemble, for which then free energies of binding are calculated. For those large and complex molecules, the results are in good agreement with experimental values with a mean error of 3 kcal/mol. The GFN2-xTB energies of binding are validated by advanced density functional theory calculations and found to be in good agreement. The efficacy of the automated QM sampling workflow allows the extension towards other complex molecular interaction scenarios.     

Influence of the cross‐sectional shape on the structure and properties of polyester fibers

The effects of the fiber cross‐sectional shape on the structure and properties of polyester fibers were investigated. Fully drawn yarn (FDY) polyester fibers (167 dtex and 48 filaments) were produced under the same spinning conditions used in a spinning plant. The only difference between the fibers was their cross‐sectional shapes. Four different cross‐sectional shapes were chosen for the experimental work: round, hollow‐round, trilobal, and hollow‐trilobal. The crystallinity and values of the maximum stress, maximum strain, modulus, yield stress, shrinkage in boiling water, and unevenness of the fibers were determined. The difference in the cross‐sectional shapes influenced the modulus, maximum strain, yield stress, and shrinkage in boiling water. No effects on the crystallinity and maximum stress were observed. The results suggested that the hollow fibers had higher amorphous orientation than the full fibers. The hollow‐round fiber had the highest unevenness value. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2615–2621, 2007     

Design of a Commercial Hybrid VTOL UAV System

For the last four decades Unmanned Air Vehicles (UAVs) have been extensively used for military operations that include tracking, surveillance, active engagement with weapons and airborne data acquisition. UAVs are also in demand commercially due to their advantages in comparison to manned vehicles. These advantages include lower manufacturing and operating costs, flexibility in configuration depending on customer request and not risking the pilot on demanding missions. Even though civilian UAVs currently constitute 3 % of the UAV market, it is estimated that their numbers will reach up to 10 % of the UAV market within the next 5 years. Most of the civilian UAV applications require UAVs that are capable of doing a wide range of different and complementary operations within a composite mission. These operations include taking off and landing from limited runway space, while traversing the operation region in considerable cruise speed for mobile tracking applications. This is in addition to being able traverse in low cruise speeds or being able to hover for stationary measurement and tracking. All of these complementary and but different operational capabilities point to a hybrid unmanned vehicle concept, namely the Vertical Take-Off and Landing (VTOL) UAVs. In addition, the desired UAV system needs to be cost-efficient while providing easy payload conversion for different civilian applications. In this paper, we review the preliminary design process of such a capable civilian UAV system, namely the TURAC VTOL UAV. TURAC UAV is aimed to have both vertical take-off and landing and Conventional Take-off and Landing (CTOL) capability. TURAC interchangeable payload pod and detachable wing (with potential different size variants) provides capability to perform different mission types, including long endurance and high cruise speed operations. In addition, the TURAC concept is to have two different variants. The TURAC A variant is an eco-friendly and low-noise fully electrical platform which includes 2 tilt electric motors in the front, and a fixed electric motor and ducted fan in the rear, where as the TURAC B variant is envisioned to use high energy density fuel cells for extended hovering time. In this paper, we provide the TURAC UAV’s iterative design and trade-off studies which also include detailed aerodynamic and structural configuration analysis. For the aerodynamic analysis, an in-house software including graphical user interface has been developed to calculate the aerodynamic forces and moments by using the Vortex Lattice Method (VLM). Computational Fluid Dynamics (CFD) studies are performed to determine the aerodynamic effects for various configurations For structural analysis, a Finite Element Model (FEM) of the TURAC has been prepared and its modal analysis is carried out. Maximum displacements and maximal principal stresses are calculated and used for streamlining a weight efficient fuselage design. Prototypes have been built to show success of the design at both hover and forward flight regime. In this paper, we also provide the flight management and autopilot architecture of the TURAC. The testing of the controller performance has been initiated with the prototype of TURAC. Current work focuses on the building of the full fight test prototype of the TURAC UAV and aerodynamic modeling of the transition flight.     

Leveraging technological knowledge transfer by using fuzzy linear programming technique for multiattribute group decision making with fuzzy decision variables

Despite the importance of knowledge transfer for firms involved in foreign direct investment activities, this area has not received appropriate attention from the perspectives of both the knowledge transferor (i.e., MNC parent) and the knowledge recipient. To fill in the gap in the current literature we propose a model to understand the links between criteria complicating the transfer of knowledge and preferences that the company has to focus. This model is based on both the existing literature as well as views of company representatives and provides a useful methodology for identifying decision making problems on the transfer of knowledge. In this paper, we investigate the fuzzy linear programming technique (FLP) to analyze these links and for multiple attribute group decision making (MAGDM) problems with preference information on criteria. To reflect the decision maker’s subjective preference information and to determine the weight vector of attributes, the technique for order preference by similarity to ideal solution (TOPSIS) developed by Hwang and Yoon (1995) and the linear programming technique for multidimensional analysis of preference (LINMAP) developed by Sirinivasan and Shocker (Psychometrica 38:337–369, 1973) are used.     

A comprehensive study on mid-level representation and ensemble learning for emotional analysis of video material

Multimedia Tools and Applications - In today’s society where audio-visual content such as professionally edited and user-generated videos is ubiquitous, automatic analysis of this content is...     

Successful adoption of macroergonomics in manufacturing: Using a multicriteria decision‐making methodology– analytic hierarchy process

The research presented in this paper aims to support the macroergonomics adoption improvement process by developing a broader understanding of relationships between key macroergonomics factors and management styles. The methodology involves knowledge acquisition, identifying, and categorizing a holistic set of key criteria about the macroergonomics adoption process. The Analytic Hierarchy Process is suggested as a multi‐attribute decision‐making methodology to effectively enhance adoption of macroergonomics and to improve management decision performance in measuring and comparing the overall performance of different management styles based on macroergonomical criteria. The study found that in terms of company culture, participation, human capability, and attitudes, the best management style in improving macroergonomics adoption is Management by Values. © 2004 Wiley Periodicals, Inc. Hum Factors Man 14: 353–377, 2004.     

Non-Cytokine Protein Profile of the Mesenchymal Stem Cell Secretome That Regulates the Androgen Production Pathway

Polycystic ovary syndrome (PCOS) is the most common endocrine and metabolic disorder in reproductive-aged women, and it typically involves elevated androgen levels. Recently, it has been reported that human bone marrow mesenchymal stem cells (hBM-MSCs) can regulate androgen synthesis pathways. However, the details of the mechanism are still unclear. hBM-MSC-derived secreted factors (the secretome) are promising sources of cell-based therapy as they consist of various types of proteins. It is thus important to know which proteins interact with disease-implicated biomolecules. This work aimed to investigate which secretome components contain the key factor that inhibits testosterone synthesis. In this study, we fractionated hBM-MSC-conditioned media into three fractions based on their molecular weights and found that, of the three fractions, one had the ability to inhibit the androgen-producing genes efficiently. We also analyzed the components of this fraction and established a protein profile of the hBM-MSC secretome, which was shown to inhibit androgen synthesis. Our study describes a set of protein components present in the hBM-MSC secretome that can be used therapeutically to treat PCOS by regulating androgen production for the first time.     

In vitro gastrointestinal digestion of polyphenols from different molasses (pekmez) and leather (pestil) varieties

In this study, to evaluate the in vitro bioaccessibility of eight different pekmez and pestil samples, total phenolics, flavonoids, proanthocyanidins, anthocyanins and antioxidant capacity were determined at different phases of simulated gastrointestinal (GI) digestion. For the analysis of antioxidant activity, four different methods were used including 2,2‐azinobis(3‐ethylbenzothiazoline)‐6‐sulfonic acid, 1,1‐diphenyl‐2‐picrylhydrazil, ferric reducing antioxidant power and cupric ion reducing antioxidant capacity. The results revealed that the dialysed fraction (IN) represented 12–50%, 3–17% and 3–72% of the total phenolics, flavonoids and proanthocyanidins, respectively. Moreover, total antioxidant capacity of IN fraction was 2–57% of the initial values obtained for pekmez and pestil samples. To identify the influence of simulated in vitro GI digestion on total anthocyanins, only black mulberry molasses (pekmez) and plum leather (pestil) were analysed and according to the results no anthocyanins were detected in the IN fraction for both samples. The present study presented a detailed insight of bioaccessibility of polyphenols in various pekmez and pestil samples.