Co(OH)2-combined carbon-nanotube array electrodes for high-performance micro-electrochemical capacitors

We have investigated binder-free Co(OH)₂-combined carbon-nanotube (CNT) array electrodes using anodized aluminum oxide (AAO) templates for micro-electrochemical capacitors. It is shown that compared to the capacitors fabricated with CNT only electrodes (6.3 F/cm³ at 100 mV/s), those with the Co(OH)₂-combined CNT array electrodes produce much higher capacitance (12.74 F/cm³ at 100 mV/s) together with superior high-rate capacitance. The improved electrochemical behavior is explained in terms of high capacitance of amorphous Co(OH)₂ electrode and the use of CNT arrays as effective current collector.     

Nanocrystalline nickel cobalt hydroxides/ultrastable Y zeolite composite for electrochemical capacitors

A novel nanocomposite of Co(OH)₂−Ni(OH)₂ and ultrastable Y molecular sieves was synthesized by an improved chemical precipitation method for electrochemical capacitors. The Co(OH)₂−Ni(OH)₂/ultrastable Y zeolite (USY) composite and its microstructure were characterized by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. Electrochemical characterization was performed by cyclic voltammetry and galvanostatic charge–discharge measurements. The results show that Co(OH)₂−Ni(OH)₂/USY microstructure applied for the electrochemical energy storage has displayed superior capacitive performance. The effect of heat treatment conditions on specific capacitance properties was also systemically explored. Upon annealing at 250 °C, the maximum specific capacitance was up to 479 F/g (or 1,710 F/g after correcting for the weight percent of Co(OH)₂−Ni(OH)₂ phase). Annealing temperatures higher than 250 °C may cause the hydroxide to form oxide phase and decrease the surface activity of the oxide, thereby leading to a decline of the specific capacitance.     

A Co(OH)2−graphene nanosheets composite as a high performance anode material for rechargeable lithium batteries

A Co(OH)₂?graphene nanosheets (Co(OH)₂?GNS) composite as a high performance anode material was firstly prepared through a simultaneous hydrothermal method. The structure, morphology and electrochemical performance of the obtained samples were systematically investigated by X-ray diffraction (XRD), transmission electron microscope (TEM) and electrochemical measurements. According to the TEM analysis, the surface of the Co(OH)₂ is surrounded with GNS in the Co(OH)₂?GNS composite. The specific discharge (lithiation) and charge (delithiation) capacities of Co(OH)₂?GNS attain to 1599 and 1120 mAh/g at a current density of 200 mA/g in the first cycle, respectively. After 30 cycles, the reversible capacity of Co(OH)₂?GNS is still 910 mAh/g with the retention of 82%. The particular structure of Co(OH)₂ particles surrounded by the GNS could limit the volume change during cycling and provide an excellent electronic conduction pathway, which could be the main reason for the remarkable improvement of electrochemical performance.     

Synthesis and characterization of Co(OH)<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> nanotube composites as supercapacitor materials

A novel composite of Co(OH)₂ and TiO₂ nanotubes was synthesized by a chemical precipitation method. Co(OH)₂/TiO₂ nanotube composites and its microstructure were characterized by transmission electron microscopy (TEM), X-ray diffraction pattern (XRD). The electrochemical capacitance performance of this composite was investigated by cyclic voltammetry and charge–discharge tests with a three-electrode system in 6 M KOH solution. We synthesized different weight ratios of Co(OH)₂/TiO₂ nanotubes, a maximum specific capacitance of 229 F/g was obtained for the composite. Based on these tests, we propose that TiO₂ nanotubes provide the three-dimensional nanotube network structure for the composite and make the Co(OH)₂ dispersed. For these reasons, the TiO₂ nanotubes used as a framework for Co(OH)₂ improve the utilization of Co(OH)₂ greatly.     

A facile approach to the preparation of loose-packed Ni(OH)2 nanoflake materials for electrochemical capacitors

Loose-packed nickel hydroxides were successfully synthesized by a facile chemical precipitation method. Structure characterizations indicate that a nanoflake structure with low crystallinity for the nickel hydroxide samples was obtained. Electrochemical studies were carried out using cyclic voltammetry, chronopotentiometry technology, and alternating current impedance spectroscopy, respectively. A maximum specific capacitance of 2,055F/g could be achieved in 2M aqueous KOH with the potential range of 0 to 0.4V (vs. the saturated calomel electrode) in a half-cell setup configuration for the nanoflake Ni(OH)₂ electrode, suggesting its potential application in the electrode material for electrochemical capacitors. Furthermore, the effect of annealing temperatures on the electrochemical capacitance characteristics has also been systemically explored.     

Nitrogen-doped porous carbon coated on MnCo2O4 nanospheres as electrode materials for high-performance asymmetric supercapacitors

Spinel-based nanostructured materials are commonly used as promising electrode materials for supercapacitor applications. The combination of heteroatom-doped carbon material with spinel oxides substantially improves the specific capacitance and cyclic stability. In this work, dopamine-derived nitrogen-doped carbon was coated on spinel phase MnCo₂O₄ nanospheres using simple solvothermal and calcination methods. Surface morphology and the crystalline structure of the prepared MnCo₂O₄@Nitrogen-doped carbon were confirmed by FESEM and X-ray diffraction. The electrochemical performance of MnCo₂O₄@Nitrogen-doped carbon electrode material was analyzed by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy techniques. MnCo₂O₄@nitrogen-doped carbon exhibits the highest specific capacitance of 1200 F/g compared to MnCo₂O₄ spheres are 726 F/g at 1 A/g and exhibits excellent cyclic stability (capacitance retention of 87% at 7 A/g after 3000 cycles). The enhanced performance of the composite might be benefitted from the synergistic effect between nitrogen-doped carbon on porous MnCo₂O₄ spheres. Furthermore, an asymmetric supercapacitor device was fabricated by using the optimized composition of MnCo₂O₄@NC-2 as a positive electrode and nitrogen, sulfur-doped reduced graphene oxide (NS-rGO) as a negative electrode, respectively. This asymmetric supercapacitor device achieves a maximum energy density of 61.0 Wh/kg at a power density of 2889 W/kg and possesses excellent capacitance retention of 95% after 5000 cycles at 7 A/g.     

Preparation of hexagonal nanoporous nickel hydroxide film and its application for electrochemical capacitor

Nanoporous nickel hydroxide film has been successfully electrodeposited on titanium substrate from nickel nitrate dissolved in the aqueous domains of the hexagonal lyotropic liquid crystalline phase of Brij 56. Low-angle X-ray diffraction (XRD), transmission electron microscopy (TEM), and atomic force microscopy (AFM) studies show that the film has a regular nanostructure consisting of a hexagonal array of cylindrical pores with a repeat center-to-center spacing of about 7 nm. Preliminary electrochemical studies are carried out using cyclic voltammetry (CV) and chronopotentiometry technology. A maximum specific capacitance of 578 F g⁻¹ could be achieved for the nanoporous Ni(OH)₂ film electrode, suggesting its potential application in electrochemical capacitors.     

Electrochemical preparation of composite of poly brilliant cresyl blue (PBCB)–poly 5-amino-2-napthalenesulfonic acid electrode and electrocatalytic application

Poly brilliant cresyl blue (PBCB) and poly 5-amino-2-napthalenesulfonic (PANS) polymer composite modified electrode was fabricated by the electrochemical polymerization of brilliant cresyl blue and 5-amino-2-napthalenesulfonic acid. When compared polymer composite electrodes with PBCB and PANS electrode, it showed enhanced electrochemical property. The morphology of the resulting composite electrode was characterized by AFM, and the electrochemical properties of the modified electrode were characterized by cyclic voltammetry and amperometry. The composite electrode showed surface-confined and pH-dependent electrochemical property. The composite electrode exhibited high catalytic behavior toward the reduction of hydrogen peroxide at low overpotential. The detection limit and sensitivity of the electrode toward H₂O₂ detection was 5 μM and 1 μA/mM, respectively, and response time was less than 10 s for hydrogen peroxide.     

Co(OH)_2/NaY复合材料的制备及其超级电容性能

应用化学共沉淀法制备Co(OH)2/NaY复合材料,并以其组成超级电容器.测试结果表明,该材料具有良好的超级电容性能,Co(OH)2的最高比电容达632.5 F.g-1.     

Sulfide-enhanced electrochemical capacitance of cobalt hydroxide on nanofibered parent substrate

Two approaches—substrate nanostructuring and incorporation of sulfide—were studied with the aim to increase electrochemical capacitance of cobalt (hydro)oxide. A fiber structure of cobalt was deposited electrochemically with the fibers in the order of tens of nanometers in thickness and hundreds of nanometers in length. Cobalt hydroxide film was formed on the nanostructured substrate by anodic polarization in an alkaline solution. The hydroxide formation and its electrochemical capacitance have been studied by cyclic voltammetry in conjunction with the electrochemical quartz crystal microbalance (EQCM). An irreversible behavior was typical of the first anodic polarization cycle; it turned gradually to a reversible one during subsequent cycling. EQCM measurements indicated exponential electrode mass growth during the first cycle, with subsequent transition to a quasipassive state. The redox transitions Co(II) → Co(III) → Co(IV), which determine pseudocapacitance, did not cause remarkable electrode mass change. The electrochemical capacitance of the nanofiber sample was found up to five times higher when compared to that formed on conventional cobalt (abraded surface). Specifics of “per 1 g” evaluation of capacitance performance is discussed. Measurements showed that about 10% of the entire hydroxide structure took part in the capacitive process. The capacitance value determined per 1 g of active Co(OH)₂ was in agreement with the limiting value predicted by the Faraday’s law (2,421 F g⁻¹) sulfide-enhanced system with 18% CoS exhibited up to three times higher capacitance when compared to that of the sulfide-free counterpart. The system shows promise for practical applications due to its low cost and technical simplicity.     

Controlled synthesis of MnSn(OH)6/graphene nanocomposites and their electrochemical properties as capacitive materials

We report the synthesis of novel MnSn(OH)₆/graphene nanocomposites produced by a co-precipitation method and their potential application for electrochemical energy storage. The hydroxide decorated graphene nanocomposites display better performance over pure MnSn(OH)₆ nanoparticles because the graphene sheets act as conductive bridges improving the ionic and electronic transport. The crystallinity of MnSn(OH)₆ nanoparticles deposited on the surface of graphene sheets also impacts the capacitive properties as electrodes. The maximum capacitance of 31.2 F/g (59.4 F/g based on the mass of MnSn(OH)₆ nanoparticles) was achieved for the sample with a low degree of crystallinity. No significant degradation of capacitance occurred after 500 cycles at a current density of 1.5 A/g in 1 M Na₂SO₄ aqueous solution, indicating an excellent electrochemical stability. The results serve as an example demonstrating the potential of integrating highly conductive graphene networks into binary metal hydroxide in improving the performance of active electrode materials for electrochemical energy storage applications.     

Three-dimensional bundle-like multiwalled carbon nanotubes composite for supercapacitor electrode application

Bundle-type mutil-walled carbon nanotubes (MWCNTs) composite electrode is the first investigation and publication for the supercapacitor application. According to the thermogravimetric analysis results, as-synthesized BCNTs are considered as the electrode materials for supercapacitors and electrochemical double-layer capacitor in this study. The Brunauer–Emmett–Teller specific surface area of as-prepared bundled carbon nanotubes (BCNTs) is 95.29 m²/g given to a type III isotherm and H3 hysteresis loops. Slow scanning rates promote and enhance to achieve high C_b because of the superior conductivity of CNT bundles and one side close-layered Ni/Mg/Mo alloy inside the BCNT-based electrode and facile electron diffusivity between electrolyte and electrode. The specific capacitance C_s (1,560 F/g) is nearly equal to the maximum specific capacitance, which the BCNT-based composite electrode can actually be able to charge or fill in. The maximum energy density value is 195 Wh/kg with corresponding power density values of 0.21 kW/kg. Furthermore, the active 3D BCNTs material fabricated electrode enhances to contact the electrolyte directly and decreases the ion diffusion limitation. Electrochemical impedance spectroscopy spectrum summarized as the low-frequency area controls by mass transfer limitation, and the high-frequency area dominates by charge transfer of kinetic control. After 2,000 consecutive cyclic voltammetry sacnings and galvanostatic charge-discharge cycles at a current density of 1.67 A/g performs, the specific capacitance retentions of 3D BCNTs electrodes achieved 128.2 and 77.3%, respectively. Three-dimensional BCNT composite electrodes exhibit good conductivity and low charge transfer resistance, which is beneficial to fast charge transfer between the BCNTs electrode materials and electrolytes.     

Drastically enhanced cycle life of Co-B alloy electrode by 8-hydroxyquinoline at elevated temperature

The effect 8-hydroxyquinoline (8-HQ) additive in electrolyte on the cyclic stability of Co-B alloy electrode was investigated at elevated temperature (55 °C). Charge–discharge measurements show that 8-HQ can drastically enhance the cycle life of Co-B alloy electrode. Specifically, in the electrolyte containing 0.028 M 8-HQ additive, the discharge capacity of Co-B alloy electrode after 100 cycles are still up to 385.8 mAh/g at 55 °C. However, for the electrode in 8-HQ-free electrolyte, its discharge capacity is sharply decreased to only 138.5 mAh/g after 100 cycles. ICP-OES, XRD and ATR/FT-IR measurements were used to clarify the reason of the improvement in the cyclic stability. These results show that beneficial effect of 8-HQ on cycle life of Co-B alloy electrode can be attributed to the formation of insoluble complex (8-HQ)₂Co(II)·2H₂O protective layer that can suppress the dissolution of Co(OH)₂ into electrolyte at elevated temperature.     

Synthesis and supercapacitance of flower-like Co(OH)<Subscript>2</Subscript> hierarchical superstructures self-assembled by mesoporous nanobelts

A facile hydrothermal strategy was first proposed to synthesize flower-like Co(OH)₂ hierarchical microspheres. Further physical characterizations revealed that the flower-like Co(OH)₂ microspherical superstructures were self-assembled by one-dimension nanobelts with rich mesopores. Electrochemical performance of the flower-like Co(OH)₂ hierarchical superstructures were investigated by cyclic voltammgoram, galvanostatic charge–discharge and electrochemical impedance spectroscopy in 3 M KOH aqueous electrolyte. Electrochemical data indicated that the flower-like Co(OH)₂ superstructures delivered a specific capacitance of 434 F g⁻¹ at 10 mA cm⁻² (about 1.33 A g⁻¹), and even kept it as high as 365 F g⁻¹ at about 5.33 A g⁻¹. Furthermore, the SC degradation of about 8% after 1,500 continuous charge–discharge cycles at 5.33 A g⁻¹ demonstrates their good electrochemical stability at large current densities.     

A novel polyaniline/mesoporous carbon nano-composite electrode for asymmetric supercapacitor

<正>A novel nano-composite of polyaniline/mesoporous carbon(PANI/CMK-3) was prepared with mesoporous carbon(CMK-3) serving as the support.Electrochemical asymmetric capacitors have been successfully designed by using PANI/CMK-3 composite and CMK-3 as positive and negative electrode,respectively.The results showed that the discharge capacity of the asymmetric capacitor could reach 87.4 F/g under the current density of 5 mA/cm~2 and cell voltage of 1.4 V.The energy density of the asymmetric capacitor was up to 23.8 Wh/kg with a power density of 206 W/kg.Furthermore,PANI/CMK-3-CMK-3 asymmetric capacitor using this PANI/CMK-3 nano-composite could be activated quickly and possess high charge-discharge efficiency.     

Synthesis,characterization and electrochemical investigation on Nickel Manganese Oxide - Polybutylene Sebacate composite electrode of biodegradable nature for micro capacitor applications

Synthesis, characterization, surface morphology and electrochemical properties of non-stochiometric Nickel–Manganese oxide nanoparticles were carried out by urea assisted sol gel method. The Ni_1-xMn_xO (0.15≤ X ≤ 0.50) nanoparticle synthesized was found to be cubic and the existence of Mn₃O₄ and MnO₂ phases were established and confirmed by X-ray Diffraction (XRD) studies. Thermo Gravimetric-Differential Thermal Analysis (TG-DTA) studies provided the calcination temperature of the xerogel at 600 °C, wherein the lattice strain and the size of the nanoparticles were determined through Williamson Hall (WH) Plot. The surface morphology characteristics of these nanoclusters were authenticated by Scanning Electron Microscope (SEM) techniques. Further, electroanalytical techniques were employed as a tool in establishing the nanocomposite as an intriguing material to act as a capacitor at enhanced efficiency compared to that of conventional capacitors. The electrochemical competence of the electrode was established through cyclic voltammogram, (CV) and Electrochemical Impedance Spectral (EIS) studies. The values of capacitance for Ni_1-xMn_xO, (0.15≤ X ≤ 0.5) nanoparticles varied from 7000 to 8000 mFg^?1, measured at 20 mVs^?1scan rate in 1.0 M Na₂SO₄and the temperature dependent conductance property for Ni_0.85Mn_0.15O electrode verified the Arrhenius Equation. The synthesis of a biodegradable polymer, Poly Butylene Sebacate (PBS) employed as conducting polymer for ultra capacitor applications is comparatively superior and definitely provides an edge over other capacitors in existence which is predominanantly attributed to its biodegradability nature. Further, the specific capacitance of PBS- Ni_0.85Mn_0.15O composite electrode was found to be 5180 mFg^?1 which clearly illustrates that these composites are potential candidates of the type biodegradable supercapacitors that are evolving transient sources of power in the future and the biodegradability of the polymer-metal oxide composite electrode fetches more significance in terms of disposal of electronic and electrical wares.     

季铵盐掺杂聚苯胺电极的电容性能

采用循环伏安法,在铂电极表面聚合制备了季铵盐[CnH2n+1N(CH3)3]Cl(n=12,14,16,18)掺杂的聚苯胺修饰电极。 利用扫描电子显微镜、红外光谱以及X射线衍射对复合电极的表面形貌和结构进行了表征。 用循环伏安法、交流阻抗和恒电流充放电测试对电极的电化学性质和电容行为进行了系统研究。 结果表明,其中[C18H37N(CH3)3]Cl季铵盐掺杂的聚苯胺复合电极比表面积大,电容性能好,在2×10-3 A的充电电流下,初始比电容高达329.6 F/g,未掺杂电极比电容为199.0 F/g。 而且,复合电极的循环稳定性良好,经30次循环后比电容保持为252.4 F/g。     

Electrodeposition of MnO2 nanowires on carbon nanotube paper as free-standing,flexible electrode for supercapacitors

MnO₂ nanowires were electrodeposited onto carbon nanotube (CNT) paper by a cyclic voltammetric technique. The as-prepared MnO₂ nanowire/CNT composite paper (MNCCP) can be used as a flexible electrode for electrochemical supercapacitors. Electrochemical measurements showed that the MNCCP electrode displayed specific capacitances as high as 167.5 F g⁻¹ at a current density of 77 mA g⁻¹. After 3000 cycles, the composite paper can retain more than 88% of initial capacitance, showing good cyclability. The CNT paper in the composite acted as a good conductive and active substrate for flexible electrodes in supercapacitors, and the nanowire structure of the MnO₂ could facilitate the contact of the electrolyte with the active materials, and thus increase the capacitance.     

Design of hierarchical double-layer NiCo/NiMn-layered double hydroxide nanosheet arrays on Ni foam as electrodes for supercapacitors

Reasonably designing the structure of composite materials and effectively increasing electroactive sites of electrode materials are considered as the promising approaches to enhance the electrochemical performance for supercapacitors. Herein, a double-layer layered double hydroxide nanosheet array grown on Ni foams is constructed through a facile two-step hydrothermal method. The as-prepared double-layer electrode materials including Ni, Co, and Mn elements possess large surface area and porosity; thus, it can increase the contact between electrolytes and the electrode materials, which leads to an increase in electroactive sites and high electrochemical performance. The double-layer electrode shows a high capacitance performance (2950 F/g at 1 A/g) and superior cycling stability (79% retention after 10,000 cycles at 10 A/g). In addition, the asymmetric NiCo/NiMn-LDHs//AC device is fabricated and manifests good capacity with excellent cyclic stability of 82.2% after 10,000 cycles.     

Hydrothermal synthesis of reduced graphene sheets/Fe2O3 nanorods composites and their enhanced electrochemical performance for supercapacitors

Reduced graphene nanosheets/Fe₂O₃ nanorods (GNS/Fe₂O₃) composite has been fabricated by a hydrothermal route for supercapacitor electrode materials. The obtained GNS/Fe₂O₃ composite formed a uniform structure with the Fe₂O₃ nanorods grew on the graphene surface and/or filled between the graphene sheets. The electrochemical performances of the GNS/Fe₂O₃ hybrid supercapacitor were tested by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge–discharge tests in 6 M KOH electrolyte. Comparing with the pure Fe₂O₃ electrode, GNS/Fe₂O₃ composite electrode exhibits an enhanced specific capacitance of 320 F g⁻¹ at 10 mA cm⁻² and an excellent cycle-ability with capacity retention of about 97% after 500 cycles. The simple and cost-effective preparation technique of this composite with good capacitive behavior encourages its potential commercial application.