Isokinetic correlation analysis of the series of electrophilic substitution reactions of o -substituted phenylmercurials

Isokinetic relationships of the series of electrophilic substitution reactions ofo-substituted phenylmercurials are studied, and the results show, for the first time, that isokinetic correlation analysis can reveal the dominant factor in the system of the reactions. The analysis of S_E2 ofo-substituted phenylmercuric chlorides indicates that the steric effect ofo-substituents is the predominant factor when I₂ is used as electrophilic agent, however, the electronic effect ofo-substituents would become the predominant factor when HCl is used as the electrophilic agent. In S_E1 ofo-substituted phenylmercuric chlorides, the results of the analysis display that the predominant factor is the field effects ofo-substituents. The determination of predominant factors in those reactions would provide further scientific basis for those reaction mechanisms.     

Isokinetic correlation analysis of the series of electrophilic substitution reactions ofo-substituted phenylmercurials

Isokinetic relationships of the series of electrophilic substitution reactions ofo-substituted phenylmercurials are studied, and the results show, for the first time, that isokinetic correlation analysis can reveal the dominant factor in the system of the reactions. The analysis of S_E2 ofo-substituted phenylmercuric chlorides indicates that the steric effect ofo-substituents is the predominant factor when I₂ is used as electrophilic agent, however, the electronic effect ofo-substituents would become the predominant factor when HCl is used as the electrophilic agent. In S_E1 ofo-substituted phenylmercuric chlorides, the results of the analysis display that the predominant factor is the field effects ofo-substituents. The determination of predominant factors in those reactions would provide further scientific basis for those reaction mechanisms.     

Correlations of the rate constants of phosphorylation reactions with the empirical parameters of the solvent polarity

Regression analysis of the solvent effects on the rate constants of nucleophilic substitution at the phosphoryl group was performed with the use of the empirical parameters of solvent polarity which characterize the ability of the solvents to electrophilic and nucleophilic solvation. The nucleophilic solvation of reagents by solvents, as a rule, favors the phosphorylation reactions. In the phosphorylation reactions of anionic nucleophiles, the electrophilic solvation of anions influences negatively the reactions rates. The phosphorylation of amines by chlorides of phosphorus acids is facilitated by the electrophilic solvation of a separated anion. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 271–274, February, 1998.     

Cu(I)-catalyzed stereospecific coupling reactions of enantioenriched α-stannylated benzyl carbamates and their application

Enantioenriched α-stannylated benzyl carbamates were used in highly stereospecific coupling reactions employing Cu(I) as catalyzing transition metal. Acid chlorides and allyl bromide derivatives were used as electrophilic coupling partners. The reaction was applied in the synthesis of two highly enantioenriched indanoles and one enantioenriched tetraline via intramolecular cyclization reactions.     

Replacing conventional carbon nucleophiles with electrophiles: nickel-catalyzed reductive alkylation of aryl bromides and chlorides

A general method is presented for the synthesis of alkylated arenes by the chemoselective combination of two electrophilic carbons. Under the optimized conditions, a variety of aryl and vinyl bromides are reductively coupled with alkyl bromides in high yields. Under similar conditions, activated aryl chlorides can also be coupled with bromoalkanes. The protocols are highly functional-group tolerant (-OH, -NHTs, -OAc, -OTs, -OTf, -COMe, -NHBoc, -NHCbz, -CN, -SO(2)Me), and the reactions are assembled on the benchtop with no special precautions to exclude air or moisture. The reaction displays different chemoselectivity than conventional cross-coupling reactions, such as the Suzuki-Miyaura, Stille, and Hiyama-Denmark reactions. Substrates bearing both an electrophilic and nucleophilic carbon result in selective coupling at the electrophilic carbon (R-X) and no reaction at the nucleophilic carbon (R-[M]) for organoboron (-Bpin), organotin (-SnMe(3)), and organosilicon (-SiMe(2)OH) containing organic halides (X-R-[M]). A Hammett study showed a linear correlation of σ and σ(-) parameters with the relative rate of reaction of substituted aryl bromides with bromoalkanes. The small ρ values for these correlations (1.2-1.7) indicate that oxidative addition of the bromoarene is not the turnover-frequency determining step. The rate of reaction has a positive dependence on the concentration of alkyl bromide and catalyst, no dependence upon the amount of zinc (reducing agent), and an inverse dependence upon aryl halide concentration. These results and studies with an organic reductant (TDAE) argue against the intermediacy of organozinc reagents.     

钯催化Stille交叉偶联反应研究新进展

综述了钯催化Stille交叉偶联反应的最新研究进展, 主要包括三个方面: (1)有机锡化合物与有机亲电试剂如卤代芳香烃、卤代烷烃、酰氯等的反应; (2)Stille反应的机理; (3) Stille反应在有机合成中的应用.     

芳基汞化合物的性质研究 VI.某些氯化芳基汞的紫外吸收光谱

The UV spectra of 24 substituted phenylmercuric chlorides as well as α-and β-naphthylmereuric chlorides were measured in ethanolic solutions. The effects of the substitution group on the C-Hg bond and UV spectral characterisics were discussed.     

Further investigations into the formation of imide linkages during the amidation of mono- and difunctional aroxyacetyl chlorides

This paper further investigates imide formation in amidation reactions involving Bischloride A2 and suitably selected mono- and difunctional analogues on the one hand, and primary aromatic mono- and diamines on the other. It also investigates the reaction of these acid chlorides with secondary mono- and diamines. If, say, N,N′ dimethyl p-phenylene diamine and hydroquinone dioxyacetyl chloride or bischloride A2 were to react quantitatively, then a linear unbranched polyamide would be expected to be the result which, in the absence of any hydrogen remaining at the amide link, would no longer present a site for further electrophilic attack on the part of the exceptionally reactive aroxyacetyl chloride. There also arises the possibility that a monoamine such as aniline could conceivably act as a difunctional reagent in the presence of aroxyacetyl chlorides. In the event of this reaction proceeding quantitatively one would expect to obtain a linear polyimide in which each imide–nitrogen atom carries a phenyl group. In carrying out the experimental preparative work which is required to elucidate these points we used both monofunctional reactants as model compounds and difunctional reactants in order to assess the polymeric resultants. The products were characterized by means of ¹H-NMR, ¹³C-NMR, IR spectroscopy, TLC, and T_g determinations. The conclusions drawn on the basis of the experimental work provided a satisfactory interpretation of the complex reactions which occur during the polyamidation of bischloride A2. They also point to interesting possibilities for the use of difunctional aroxyacetyl chlorides as modifying comonomers in minor amounts in the preparation of copolyaramides with reduced crystallinity. Such copolyaramides would be expected to have better solubility in common solvents and to be more easily processable than the rather specialized and extremely high-melting polyaramides currently commercially available and could therefore extend the range of useful applications for this class of polymers. The experimental section is preceded by an introduction which briefly reviews the “state of the art,” especially as far as bischloride A2-based polyamidation reactions are concerned. It is followed by a discussion of the results, by the conclusions, and a brief summary.     

Reactions of P(III) chlorides with aldehydes: I. Synthesis of primary intermediates of the reactions of aliphatic aldehydes with P(III) chlorides possessing electrophilic properties

An approach to investigation of reactions of electrophilic P(III) chlorides with aliphatic aldehydes is developed. Its essence is the removal of HCl impurity from chloride and catalytic blocking of electrophilic center of the carbonyl group. For these purposes nitrogen-containing organic bases and alkyl vinyl ethers are used. Three types of primary intermediates with the nearest P(III) environment POCl₂, O₂PCl, and O₃P are synthesized. It is established that the stability of intermediates increases with the growing acceptor properties of substituents at P(III) and donor properties of the aldehyde fragment.     

The reaction of 2-iminobenzimidazoline derivatives with chlorosulfuric acid

The reaction of 2-imino-1,3-dimethylbenzimidazoline and its N-substituted derivatives with chlorosulfuric acid is examined. It is shown that the reaction leads to the formation of the sulfonic acid in those cases where the hydrogen of the NH group is unsubstituted, or where the substituent possesses an electron-donor character. Sulfonyl chlorides are obtained only when the exocyclic nitrogen atom bears an electrophilic radical, which reduces the basicity of the guanidine moiety.     

Use of N-trifluoroacetyl-protected amino acid chlorides in peptide coupling reactions with virtually complete preservation of stereochemistry

The use of protected amino acid chlorides for peptide coupling reactions has long been avoided due to the extensive racemization that commonly occurs during either the acid chloride formation or the coupling reaction itself. Conditions are described which allow N-trifluoroacetyl-protected amino acid chlorides to be generated in high purity and with high retention of stereochemical integrity. Control of temperature is the predominant factor in controlling racemization, and rapid formation of acid chlorides under low temperature can be conveniently achieved using Vilsmeier reagent. Stereochemical integrity is further maintained when coupling of N-trifluoroacetyl acid chlorides is carried out with amino acid esters under Schotten-Baumann conditions using specific controls on pH, temperature, and agitation. Second order rate constants for coupling and the azlactone formation associated with racemization were measured to be 4260 and 3.6 L/mol s, respectively. This high rate differential allows for the reaction to be run with a minimum excess of amine ester, and makes it suitable for continuous processing. The applicability of the preferred coupling conditions to a range of amino acid couplings is described.     

Electrophilic intramolecular cyclization of functional derivatives of unsaturated compounds: VI. Reaction of 2-(cyclohex-2-en-1-yl)acetanilides with arylsulfanyl chlorides. Structural and quantum chemical study of isomerization of 2-(2-arylsulfanyl-3-chlorocyclohexyl)acetanilides

2-(Cyclohex-2-en-1-yl)acetanilides react with arylsulfanyl chlorides in chloroform to give 2-(2-arylsulfanyl-3-chlorocyclohexyl)acetanilides which undergo isomerization into 2-chloro-3-arylsulfanylsubstituted derivatives in polar solvents. According to the results of quantum chemical calculations, the addition of arylsulfanyl chlorides to 2-(cyclohex-2-en-1-yl)acetanilides is characterized by negative Gibbs energy. Specific conformation of the isomerization products is stabilized by weak (non-covalent) interactions which make them more energetically favorable than the initial compounds. The reactions of 2-(cyclohex-2-en-1-yl)acetanilides with arylsulfanyl chlorides in nitromethane in the presence of lithium perchlorate lead to the formation of mixtures of the corresponding addition products and electrophilic intramolecular cyclization products, N-[7-(arylsulfanyl)octahydro-1-benzofuran-2-ylidene]anilinium perchlorates, which are converted into free bases by treatment with sodium ethoxide.     

Preparations and reactions of 2-trifluoromethylketenimines

Preparations and reactions of a series of 2-trifluoromethylketenimines are described. Trifluoromethylketenimines were prepared from trifluoropropanoic acids via corresponding imidoyl chlorides in good yields. 2-Trifluoromethylketenimine was functionalized at its β-position by electrophilic addition of halide, followed by dehydrohalogenation. Addition of nucleophile at α-position gave trifluoroethylated β-amino acid derivative via 1,3-proton shift.     

富N生物质原料气化过程NOx前驱物生成特性及规律

基于水平管式反应器气化条件，结合化学吸收-分光光度法和X射线光电子能谱（XPS）分析，研究了四种富氮生物质（豆秆（SBS）、稻秆（RS）、玉米秆（CS）和中密度纤维板（MDF））气化过程NO_x前驱物生成特性及规律，对比考察了燃料特性（燃料N官能团、N含量）及气化条件（温度、气化介质）的影响。结果表明，NH₃-N为主要NO_x前驱物并伴随一定量的HCN-N，绝大部分形成于初次裂解和二次反应同时进行的挥发分析出阶段。各因素通过影响NO_x前驱物组分生成路径而改变其产率：燃料特性对产率的影响主要体现在N官能团（胺类-N（N-A）类型）稳定性方面，与N含量关系不大，因不稳定N-A在初次裂解中的关键作用，MDF总产率高达74.7%（质量分数），比秸秆类平均总产率高出15%（质量分数）；温度和气化介质会影响二次反应中与NO_x前驱物相关的反应路径（特别是加氢氢化反应），秸秆SBS气化，温度从800℃到1000℃，NH₃-N产率从38.9%（质量分数）增加至47.7%（质量分数），HCN-N产率先增加后减少，峰值为18.3%（质量分数），源于各反应路径受温度影响的平衡性；气化介质改变加氢氢化反应，CO₂主要影响HCN-N，起一定抑制作用，H₂O主要影响NH₃-N，起促进作用，因此，通过调节气化介质比例可一定程度改变NO_x前期物组分的选择性。     

Nickel-catalyzed carboxylation of aryl and vinyl chlorides employing carbon dioxide

Nickel-catalyzed carboxylation of aryl and vinyl chlorides employing carbon dioxide has been developed. The reactions proceeded under a CO(2) pressure of 1 atm at room temperature in the presence of nickel catalysts and Mn powder as a reducing agent. Various aryl chlorides could be converted to the corresponding carboxylic acid in good to high yields. Furthermore, vinyl chlorides were successfully carboxylated with CO(2). Mechanistic study suggests that Ni(I) species is involved in the catalytic cycle.     

Carbon disulfide promoted reactions of 2-chloro-4,5-dihydro-imidazole with some N-nucleophiles

The reactions of 2-chloro-4,5-dihydroimidazole 1 with o-substituted anilines and azoles promoted by carbon disulfide have been carried out. Ab initio MO calculations were used to elucidate the mechanism of the reaction of 1 with N-nucleophilic reagents. A facile synthesis of 2-(4,5-dihydroimidazol-2-yl)-1H-indazole 3e bearing structural resemblances to 2-BFI, a potent and selective agonist of imidazoline I2 receptors, is also described. Structure of 3e was confirmed by NMR spectroscopy and X-ray analysis.     

Fluorination with xenon difluoride. Reaction with halogenated hydrocarbons

Filler and coworkers [1-5] have demonstrated the utility of xenon difluoride as a selective fluorinating agent for aromatic hydrocarbons in the liquid phase, while Mackenzie and coworker [6] have fluorinated aromatic compounds in the vapour phase. We have developed a fluorination reaction of phenyl substituted olefins resulting in high yields of vicinal difluorides [7,8] and trifluoroacetates, depending on the catalyst. In our continued interest in the use of xenon difluoride as a mild fluorinating agent for fluorination of organic compounds, we have tries to fluorinate some heterocyclic ring systems, e.g. imidazo-(1,2-b)-pyridazine, under conditions similar of those used for fluorination of phenyl substituted olefins [7,8,9] (room temperature, methylene chloride as solvent, hydrogen fluoride as catalyst). It is well known that heteroaromatic compounds are less reactive toward electrophilic substitution reactions then aromatic hydrocarbon systems. However, it has been shown that bromination of imidazo-(1,2-b) -pyridazine results in 3-bromo products [10], while in chlorination with phosphorus pentachloride [11], the entering order of chlorine atoms is at position 3 > 2, 7 > 8 > 6 (Radical reactions).     

RCH=CH2与过氧甲酸反应的量子化学研究

本文用MINDO/3方法研究了烯烃RCH=CH2(R=H, CH3, CHO和NO2)与过氧甲酸反应的机理。研究结果表明, RCH=CH2与过氧甲酸反应是亲电反应, 在加热条件下较容易进行。乙烯与过氧甲酸反应的过渡态具有局部对称结构; 若R为取代基时, 这种对称性不复存在, 对于R为给电子基, 过氧基的氧偏向与取代基相连的乙烯碳原子, R为吸电子基, 过氧基氧偏向乙烯的另一碳原子; 取代基的给、吸电子能力越强, 过渡态偏离对称结构越显著, 活化势垒降低或升高也越大。     

Chemistry of heteroanalogs of isoflavones. 16. Benzthiazole analogs of isoflavones

The reaction of a-(2-benzthiazolyl)-2, 4-dihydroxy-5-alkylacetophenones with anhydrides and chlorides of carboxylic acids yielded 3-(2-benzthiazolyl)chromones with electron-acceptor and electron-donor substituents, as well as chromones unsubstituted in the 2 -position. Their acylation, alkylation, and aminoacylation reactions and their interaction with electrophilic and nucleophilic reagents were studied.Taras Shevchenko Kiev University, Kiev 252017. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 464–471, April, 1994. Original article submitted March 5, 1994.     

Improvement of the stability of Hg/AC catalysts by CsCl for the high-temperature hydrochlorination of acetylene

Activated carbon-supported mercuric chloride(HgCl_2) is used as an industrial catalyst for acetylene hydrochlorination. However, the characteristic of easy sublimation of HgCl_2 leads to the deactivation o the catalyst. Here, we showed that the thermal stability of the Hg/AC catalyst can be evidently improved when Cs Cl is added into the Hg/AC catalyst. Compared with the pure Hg/AC catalyst, the sublimation rate of HgCl_2 from the Hg–Cs/AC catalyst decreased significantly and the Hg–Cs/AC catalyst showed bette catalytic activity and stability in the reaction. This promoting effect is related to the existence of cesium mercuric chlorides(Cs_xHg_yCl_(x+2y)) highlighted by XRD, HR-TEM and EDX analyses. Thus, reacting HgCl_2 with alkali chlorides to form alkali-mercuric chlorides may be a key to design highly efficient and thermally stable mercuric chloride catalyst for hydrochlorination reactions.