Lewis Superacidic Ionic Liquids with Tricoordinate Borenium Cations

The first examples of ionic liquids based on borenium cations, [BCl₂L]⁺, are reported. These compounds form highly Lewis acidic liquids under solvent‐free conditions. Their acidity was quantified by determining the Gutmann acceptor number (AN). Extremely high ANs were recorded (up to AN=182, δ_31P=120 ppm), demonstrating that these borenium ionic liquids are the strongest Lewis superacids reported to date, with the acidity enhanced by the ionic liquid environment.     

Cobalt complex in a room temperature ionic liquid: A convenient recyclable reagent for catalytic epoxidation of cyclic alkenes

Co-catalyzed epoxidation of cyclic alkenes proceeds in ionic liquid media (1-ethyl-3-methylimidazolium hexafluorophosphate). Epoxidation of the alkenes to respective epoxides was greatly accelerated by the use of a cobalt-based catalyst in the presence of H₂O₂ as an oxidant. The catalyst in ionic liquid [Emim]PF₆ was recycled and reused for about seven times.     

SYNTHESIS OF FUNCTIONAL MACROMOLECULE INTERMEDIATE THROUGH ACYLATION CATALYZED BY [Emim]Cl-AlCl3 IONIC LIQUID

Acylation reaction of anthracene with oxalyl chloride in the presence of [Emim]Cl-AlCl3 ionic liquid has been investigated. Pure 1,2-aceanthryenedione, which is used as intermediate of functional aromatic polymer material, was obtained by recrystalling the reaction mixture with aether and was determined by GC/MS, 1↑HNMR and FTIR analysis. The influences of various parameters, such as the contents of AlCl3 in [Emim]Cl-AlCl3, the amount of acylation agent, amount of [Emim]Cl-AlCl3, reaction temperature and reaction time were investigated. The optimum conditions were as follows： the molar fraction of AlCl3 in ionic liquid [x（AlCl3）] being 0.67, molar ratio of ionic liquid to anthracene being 2：1, molar ratio of oxalyl chloride to anthracene being 2：1, reaction temperature being 40℃ and reaction time being 6h. Under above conditions, the yield and selectivity of 1,2-aceanthrylenedione can reach 91.5% and 98.3% respectively. Further more, [Emim]Cl-AlCl3 ionic liquid, compared with metal halides such as AlCl3, was found to catalyze the reaction as a novel environmental friendly catalyst and solvent and can be reused.     

Recyclable zinc (II) ionic liquid catalyzed synthesis of azides by direct azidation of alcohols using trimethylsilylazide at room temperature

A new efficient method has been reported for the synthesis of azides by direct azidation of alcohols with TMSN₃ in presence of recyclable task specific ionic liquid (TSIL) [bmim]ZnCl₃ as a catalyst in DCM at room temperature. Ionic liquid [bmim]ZnCl₃ was synthesized under solvent free conditions and characterized by IR, ¹H NMR, ¹³C NMR and HRMS. The Lewis acidity of catalyst was also examined using IR spectroscopy. The main features of this new methodology are high yields of products, recyclability of catalyst, scalability of reaction to gram scale and short reaction time.     

Palladium complex in a room temperature ionic liquid: a convenient recyclable reagent for catalytic oxidation

Palladium (Pd)-catalyzed carbonylation of alcohols proceeds in ionic liquid (IL) media (1-ethyl-3-methylimidazolium hexafluorophosphate). Carbonylation of primary/secondary alcohols to aldehydes/ketones was greatly accelerated by the use of a Pd-based catalyst in the presence of NaOCl as an oxidant. The catalyst was more easier to recycle in the IL [Emim]PF₆ with an equal-proportioned CH₂Cl₂ than in the single CH₂Cl₂ or IL.     

Preparation and Characterization of a Novel Benzimidazolium Bronsted Acid Ionic Liquid and Its Application in the Synthesis of Arylic Esters

A novel Brφnsted acid task specific ionic liquid 1-ethylbenzimidazolium tetrafluoroborate （[Hebim]BF4） with functional benzimidazolium cation was synthesized and characterized by ^1H NMR, IR, MS spectra and elemental analysis. This novel ionic liquid was successfully used as dual solvent-catalyst for the synthesis of arylic esters. Higher yields were obtained in the presence of [Hebim]BF4 in comparison with other imidazolium ionic liquids because of the good solubility of the aromatic alcohols and aromatic carboxylic acids in [Hebim]BF4. The product could be separated conveniently from the reaction system, and the ionic liquid could be easily reused after removal of water under vacuum. After 10 times reuse, the selectivity of the ester was still 100%.     

Asymmetric reduction of aromatic ketones in pyridinium-based ionic liquids

The asymmetric reduction of aromatic ketones has been studied in pyridinium-based room temperature ionic liquids, namely, 1-ethyl-pyridinium tetrafluoroborate, [EtPy]⁺[BF₄]⁻ and 1-ethyl-pyridinium trifluoroacetate, [EtPy]⁺[CF₃COO]⁻. Ionic liquids were employed as solvents, while (R)-BINOL and (R)-BINOL-Br were used as chiral promoters. The effects of solvent, reaction time, temperature, catalyst loading and substituents were investigated. The reduction could be easily carried out in both ionic liquids with lower catalyst loading. 1-Ethyl-pyridinium tetrafluoroborate was recycled and reused efficiently.     

Synthesis of Novel Greener Functionalized Ionic Liquids Containing Appended Hydroxyl

Novel “greener” functionalized ionic liquids have been prepared by the reaction of 1,2‐epoxy propane and dilute sulfuric acid with [EMIm]Br or [BMIm]Br formed by alkyl bromide (RBr) and 1‐methylimidazole. This kind of ionic liquid could be possibly used as green solvent and catalyst, especially as phase‐transfer catalyst in organic chemistry (e.g., the synthesis of ethoxybenzene). Their chemical structures were characterized by ¹H NMR, ¹³C NMR, and IR.     

Study on the alcoholysis of isoflavone catalyzed by ionic liquids

Alcoholysis of soybean isoflavone glucosides by butanol catalyzed by acidic ionic liquids was studied. The effects of the ionic liquid catalyst type, catalyst concentration, reaction time and reaction temperature on glycoside conversions, and aglycons yields were investigated. The optimum reaction conditions are found to be as follows: 0.036 g mL⁻¹ of ionic liquid [BIM]HSO₄ as catalyst, reaction temperature at 104±1°C, reaction time of 100 min. Under these optimum reaction conditions near complete conversions of the three kinds of glycosides (daidzin, glycitin and genistin) are obtained. Furthermore, the kinetics parameters for the alcoholysis were estimated. The activation energies of alcoholysis for the three kinds of isoflavone glucosides are 124 kJ mol⁻¹, 67 kJ mol⁻¹ and 115 kJ mol⁻¹, respectively.     

Room-Temperature Synthesis of the Bi5[GaCl4]3 Salt From Three Different Classes of Ionic Liquids

Following the development in the synthesis of subvalent cluster compounds, we report on the use of three different classes of room-temperature ionic liquids for the synthesis of the pentabismuth-tris(tetragallate) salt, Bi₅[GaCl₄]₃, characterized by X-ray diffraction. The Bi₅[GaCl₄]₃ salt was prepared by reduction of BiCl₃ using gallium metal in ionic liquid reaction media containing a strong Lewis acid, GaCl₃. The ionic liquids; trihexyltetradecyl phosphonium chloride [Th-Td-P⁺]Cl^?, 1-dodecyl-3-methylimidazolium chloride [Dod-Me-Im⁺]Cl^? and N-butyl-N-methylpyrrolidinium chloride [Bu-Me-Pyrr⁺]Cl^? from three of the main classes of ionic liquids were used in synthesis. Reactions using ionic liquids composed of the trihexyltetradecyl phosphonium cation [Th-Td-P⁺] and the anions; tetrafluoroborate [BF₄ ^?], bis(trifluoro-methyl sulfonyl) imide [(Tf)₂N^?] and hexafluorophosphate [PF₆ ^?] were also investigated.     

Highly efficient synthesis of dicoumarols and xanthene derivatives in presence of Brønsted–Lewis acidic ionic liquids catalyst

A series of metal chloride-based acidic ionic liquids have been prepared and used as an efficient catalyst in one-pot multicomponent synthesis of biscoumarins and substituted xanthenes derivatives under solvent-free conditions. Among the acidic ionic liquids, N-methylpyrrolidonium zinc chloride (Hnmp/ZnCl₃)-based Brønsted–Lewis acidic ionic liquids were found to be an effective and recyclable catalyst for a one-pot synthesis of biscoumarins through the domino Knoevenagel–Michael reaction of a variety of aldehydes with 4-hydroxycoumarin in short reaction times. The reactions which occur under relatively mild conditions afforded the biscoumarin derivatives employing a very low loading of catalyst in satisfactory isolated yields and high purity after simple work-up. The Brønsted–Lewis acidic ionic liquid catalyst was reused four times without any variation in yield.     

Polymerization of phenylacetylene catalysed by RhTp(cod) and RhBp(cod) in ionic liquids: effect of alcohols and of tetraammonium halides

RhTp(cod) ( 1 ) and RhBp(cod) ( 2 ), almost inactive in CH₂Cl₂, became good catalysts of phenylacetylene polymerization in ionic liquids ([bmim]Cl, [bmim]BF₄: bmim = 1‐butyl‐3‐methylimidazolium, [mokt]BF₄: mokt = 1‐methyl‐3‐oktylimidazolium, [bumepy]BF₄: 1‐butyl‐4‐methylpyridinium) and in CH₂Cl₂ in the presence of tetraammonium halides ([R₄N]X, R = Bu, Et; X = Cl, Br). The highest yields of polyphenylacetylene with catalyst 1 were obtained in [bmim]Cl at 65°C (64% after 2 h) and in [mokt]BF₄ at 20°C (56% after 24 h). In alcohols (CH₃OH, (CH₃)₂CHOH, (CH₃)₃COH) as solvents, up to 100% of the polymer was produced. When a mixture of an ionic liquid and CH₃OH was used as the reaction medium, the polymer yield was similar to the yield achieved in an ionic liquid only, but the molecular weight increased remarkably. Tetraammonium salts, [R₄N]X, are co‐catalysts for 1 , and the yield of the polymer increased in the order [Et₄N]Br < [Bu₄N]Br < [Et₄N]Cl < [Bu₄N]Cl. Polymers with molecular weights from 6900 to 38 800 Da were obtained with catalyst 2 in [R₄N]Br or [R₄N]Cl, whereas in ionic liquids ([bmim]Cl, [bmim]BF₄) the corresponding molecular weights were higher, from 51 300 to 60 300 Da. Copyright © 2004 John Wiley & Sons, Ltd.     

Expeditious,Nano-BF3 · SiO2-Catalyzed Michaelis–Arbuzov Reaction in an Ionic Liquid: Synthesis of Privileged Aryl/Heterocyclic Phosphonates

An expeditious, simple, and green method was developed for the synthesis of privileged aryl/heterocyclicphosphonates, 8(a–c) to 13(a–c) through Michaelis–Arbuzov reaction of aryl/heterocyclic halides (Br), 1–6, and trialkylphosphites, 7(a–c), in room-temperature ionic liquid [bbim]Br using heterogeneous Lewis catalyst, nano-silica-supported boron trifluoride (BF₃-SiO₂). The advantages of this protocol are simplicity, good yield of the products, less reaction time (20–38 min), mild reaction conditions, easy workup, and reusability of the catalyst and ionic liquid. It is demonstrated that nano-BF₃-SiO₂ is a recoverable and easy accessible catalyst for the formation of C(sp²)-P bond in an ionic liquid.     

Ionic liquid promoted Diels-Alder Reaction between anthrone and maleimides

Ionic liquids (IL) are gaining importance as green solvents. Imidazolium ionic liquid [bmim]⁺[Cl]⁻, an environmentally benign solvent, was found to promote the Diels-Alder reaction between anthrone and maleimides at room temperature with excellent yields. The ionic liquid played a dual role as solvent and catalyst.      

酰胺类酸性离子液体催化Oxa-Michael加成反应

设计合成并表征了N-甲基吡咯烷酮磷酸盐([NMPH]H2PO4)、己内酰胺磷酸盐([NHCH]H2PO4)、N,N'-二甲基甲酰胺磷酸盐([DMFH]H2PO4)和N,N'-二甲基乙酰胺磷酸盐([DMEH]H2PO4)等酰胺类质子酸离子液体;将其用于β-苯乙醇和丁烯酮的Oxa.Michael加成反应中,考察了离子液体阳...     

An ionic liquid-mediated expeditious route to the syntheses of diaryl sulfoxides

A fast and efficient protocol is proposed for the synthesis of diaryl sulfoxides in the ionic liquid 1-butyl-3-methylimidazolium chloroaluminate, [bmim]Cl·AlCl₃, N=0.67, by employing arenes and thionyl chloride. The ionic liquid plays a dual role of Lewis acid catalyst and solvent, under ambient conditions, offering good yields of the product. The influence of the Lewis acidity of the ionic liquid on the extent of conversion is studied.     

Catalytic Conversion of Glucose into Levulinic Acid Using 2-Phenyl-2-Imidazoline Based Ionic Liquid Catalyst

Levulinic acid (LA) is an industrially important product that can be catalytically valorized into important value-added chemicals. In this study, hydrothermal conversion of glucose into levulinic acid was attempted using Brønsted acidic ionic liquid catalyst synthesized using 2-phenyl-2-imidazoline, and 2-phenyl-2-imidazoline-based ionic liquid catalyst used in this study was synthesized in the laboratory using different anions (NO₃, H₂PO₄, and Cl) and characterized using ¹H NMR, TGA, and FT-IR spectroscopic techniques. The activity trend of the Brønsted acidic ionic liquid catalysts synthesized in the laboratory was found in the following order: [C₄SO₃HPhim][Cl] > [C₄SO₃HPhim][NO₃] > [C₄SO₃HPhim][H₂PO₄]. A maximum 63% yield of the levulinic acid was obtained with 98% glucose conversion at 180 °C and 3 h reaction time using [C₄SO₃HPhim][Cl] ionic liquid catalyst. The effect of different reaction conditions such as reaction time, temperature, ionic liquid catalyst structures, catalyst amount, and solvents on the LA yield were investigated. Reusability of [C₄SO₃HPhim][Cl] catalyst up to four cycles was observed. This study demonstrates the potential of the 2-phenyl-2-imidazoline-based ionic liquid for the conversion of glucose into the important platform chemical levulinic acid.     

Epoxidation of olefins catalyzed by manganese(III) porphyrin in a room temperature ionic liquid

The epoxidation of several alkenes catalyzed by (meso-tetrakis(pentafluorophenyl)porphinato) manganese(III) chloride (MnTFPPCl) was carried out in a 3:1 [bmim]PF₆ ionic liquid/CH₂Cl₂ mixed solvent. The conversion and the yield of epoxide are excellent. It was also found that [bis(acetoxy)iodo]benzene [PhI(OAc)₂] is a more efficient oxidant than PhIO. The catalyst in the ionic liquids can be recycled for several runs without substantial diminution in the catalytic activity.     

Mass Distribution and Diffusion of [1‐Butyl‐3‐methylimidazolium][Y] Ionic Liquids Adsorbed on the Graphite Surface at 300–800 K

The structure and diffusion behavior of 1‐butyl‐3‐methylimidazolium ([bmim]⁺) ionic liquids with [Cl]^?, [PF₆]^?, and [Tf₂N]^? counterions near a hydrophobic graphite surface are investigated by molecular dynamics simulation over the temperature range of 300–800 K. Near the graphite surface the structure of the ionic liquid differs from that in the bulk and it forms a well‐ordered region extending over 30 Å from the surface. The bottom layer of the ionic liquid is stable over the investigated temperature range due to the inherent slow dynamics of the ionic liquid and the strong Coulombic interactions between cation and anion. In the bottom layer, diffusion is strongly anisotropic and predominantly occurs along the graphite surface. Diffusion perpendicular to the interface (interfacial mass transfer rate k_t) is very slow due to strong ion–substrate interaction. The diffusion behaviors of the three ionic liquids in the two directions all follow an Arrhenius relation, and the activation barrier increases with decreasing anion size. Such an Arrhenius relation is applied to surface‐adsorbed ionic liquids for the first time. The ion size and the surface electrical charge density of the anions are the major factors determining the diffusion behavior of the ionic liquid adjacent to the graphite surface.     

Glaser oxidative coupling in ionic liquids: an improved synthesis of conjugated 1,3-diynes

Terminal alkynes undergo oxidative-coupling smoothly in the presence of the CuCl-TMEDA catalytic system in hydrophobic [bmim]PF₆ ionic liquid under aerobic conditions to produce 1,3-diynes in excellent yields under mild conditions. The substrates, alkynes, show enhanced reactivity and selectivity in ionic liquids (ILs). The recovery of the catalyst is facilitated by the hydrophobic nature of the [bmim]PF₆ ionic liquid.