氟取代聚芳醚酮低温合成及其结构研究

通过傅克酰基化反应合成4,4'-二(4-氟苯甲酰基)二苯醚、4,4'-二(五氟苯甲酰基)二苯醚、4,4'-二(4-氟苯甲酰基)二苯硫醚以及4,4'-二(五氟苯甲酰基)二苯醚4种长链双卤单体,并进一步制备了含二氮杂萘酮聚芳醚酮聚合物.通过多氟取代双卤单体在含二氮杂萘酮聚芳醚酮聚合物主链中引入氟原子.多氟取代双卤单体具有多...     

溴代二羟基硝基二苯醚类化合物的合成与抑菌活性研究

综合考虑二苯醚类杀菌剂结构与活性关系的前期研究结果, 以双羟基二苯醚为原料, 经酸酐保护、硝化、去保护得到含硝基的双羟基二苯醚, 再经过溴代反应合成了7个新的溴代2,2'-, 2,4'-和4,4'-二羟基硝基二苯醚; 所有这些化合物的结构均经¹H NMR, MS, IR和元素分析所证实; 并检测了合成的溴代二羟基硝基二苯醚化合物对两种有害菌的抑菌活性, 结果表明: 它们对所测试菌种具有优良的抑制效果, 其中3个化合物在质量分数为5×10^－6的浓度下抑菌率超过100%, 能完全控制细菌的生长.     

溴代二羟基二苯醚类化合物的合成与抑菌活性研究

设计并合成了7个新的溴代2,2'-, 2,4-'和4,4'-二羟基二苯醚; 所有这些化合物的结构均经¹H NMR, MS, IR和元素分析所证实; 新化合物的结构避免了现有二苯醚杀菌剂在生产和使用过程中有可能生成高毒性二噁类化合物的缺点; 并选择8种有害菌对合成的新的溴代二羟基二苯醚进行了抑菌活性测试, 结果表明它们对所测试菌种具有很好的抑制活性, 与目前国内外广泛使用的广谱抗菌剂三氯新的抑菌活性相当.     

选择性合成双[噻吩并[2,3-d]嘧啶-4(3H)-酮]

以2-氨基-4-三氟甲基-5-甲基-噻吩-3-羧酸乙酯(1)为起始原料制得膦亚胺2.在碳酸钾的催化下,膦亚胺2与芳基异氰酸酯和伯二胺的氮杂Wittig反应制得嘧啶环上2,2’取代的双[噻吩并[2,3-d]嘧啶-4(3H)-酮]3;膦亚胺2与烷基异氰酸酯和伯二胺的氮杂Wittig反应制得嘧啶环上3,3’取代的双[噻吩并[2,3-d]嘧啶-4(3H)-酮]4.化合物3的核磁共振氢谱表明关环反应在嘧啶环的2,2’位;化合物4的核磁共振氢谱表明关环反应在嘧啶环的3,3’位.对合成反应机理的推导及目标产物核磁共振氢谱数据的分析解释了此合成反应的选择性.     

生物合理设计光系统Ⅱ抑制剂研究(Ⅴ)──取代苯甲酰胺基丙烯酸乙酯和新型嘧啶酮类化合物的合成及其Hil反应抑制活性

基于Dl蛋白结构模型,设计并合成了取代苯甲酰胺基丙烯酸乙酯及有关成环化合物嘧啶酮,通过X射线衍射确定了2-芳基-5-乙氧甲酰基-6-甲硫基-4-嘧啶酮的结构.生物活性测定结果表明,部分化合物显示出一定的Hill反应抑制活性.     

生物合理设计光系统Ⅱ抑制剂研究(Ⅴ)——取代苯甲酰胺基丙烯酸乙酯和新型嘧啶酮类化合物的合成及其Hill反应抑制活性

基于Dl蛋白结构模型,设计并合成了取代苯甲酰胺基丙烯酸乙酯及有关成环化合物嘧啶酮,通过X射线衍射确定了2-芳基-5-乙氧甲酰基-6-甲硫基-4-嘧啶酮的结构.生物活性测定结果表明,部分化合物显示出一定的Hill反应抑制活性.     

苯并噻吩并[3′,2′:2,3]吡啶并[4,5-d]噻唑并[3,2-a]嘧啶酮类衍生物的有效合成

报道了氨基磺酸作用下,通过Pictet-Spengler反应合成苯并噻吩并[3′,2′:2,3]吡啶并[4,5-d]噻唑并[3,2-a]嘧啶酮衍生物的有效合成方法.其中,该反应关键中间体7-(3-氨基苯并噻吩-2-基)噻唑并[3,2-a]嘧啶-5-酮,经由7-氯甲基噻唑并[3,2-a]嘧啶-5-酮与2-巯基苯甲腈的烷基化及Thorpe-Ziegler环化制得.该合成过程原料易得,反应条件温和,收率高,为新型稠杂环嘧啶类化合物的合成提供了简便的新途径.     

超声辐射下4-氧-2-硫代六氢嘧啶的合成

嘧啶衍生物的合成已有大量文献[1～4]报道,但是用氰基肉桂酸乙酯和硫脲作为原料合成4-氧-2-硫代六氢嘧啶类化合物,国内外尚未见报道. 超声辐射下进行的很多有机反应产率高,反应时间短,反应条件温和[5,6].近来我们尝试了在室温下利用超声辐射催化合成4-氧-2-硫代六氢嘧啶类化合物,得到了较好的结果.为了进一步研究该方法的适用范围和此类化合物的性质和用途,合成了一系列的4-氧-2-硫代六氢嘧啶类化合物.实验结果(表1)表明,该方法具有反应条件温和、反应时间短、收率高、操作简便等优点,为4-氧-2-硫代六氢嘧啶类化合物的合成提供了一条方便、快捷、有效的合成方法.     

胺类化合物与4，4’-二氟苯偶酰的亲核取代反应研究

应用胺类化合物与4,4'-二氟苯偶酰的亲核取代反应合成了多种对称或不对称的4,4'-双(二烷氨基)苯偶酰.结构经元素分析,IR,1H NMR和MS确定.其中伯胺与4,4'-二氟苯偶酰的反应得到了一边取代、另外一边形成亚胺结构的产物,并对此反应机理进行了探讨.     

芳基吡啶酮腙类化合物的设计、合成及杀菌活性研究

以吡啶二芳酮为分子插件,以嘧菌腙为母体化合物设计并合成了一系列新型芳基吡啶酮腙类化合物.产物结构经~1HNMR、~(13)CNMR及HRMS确认,并采用生长速率法对所有化合物进行了离体抑菌活性测试.结果表明:在浓度为70μmol/L时,大部分化合物对所选8种病菌具有一定的抑制活性,其中2'-甲基乙酰基苯-4,6-二甲氧基嘧啶-2-腙(Ⅲ-3)和2-(2'-((4'-溴-苯基)(3'-氯-吡啶-4'-基)-亚甲基)-肼基)-4,6-二甲氧基嘧啶(Ⅲ-18)对病原菌抑制效果明显高于对照药嘧菌腙.Ⅲ-3对番茄灰霉病菌EC50为22.18μmol/L(嘧菌腙为31.38μmol/L), Ⅲ-18对水稻纹枯病菌EC50小于0.35μmol/L,比对照药嘧菌腙提高了260倍以上.     

A cleanup method of serum extracts with molecular sieves as SPE sorbents for the analysis of polybrominated diphenyl ethers

Based on the size- and shape-selective sorption, 13X molecular sieves were developed as solid-phase extraction adsorbents to cleanup serum extract for the determination of polybrominated diphenyl ethers. The important parameters affecting the cleanup efficiency were investigated including the amount of sorbents, the type, and volume of solvents. Under the optimized conditions, the capacity for removing impurities was evaluated via gel permeation chromatography and gas chromatography with mass spectrometry. The results demonstrated that up to 99% of lipids in corn oil (13 mg) can be removed after cleanup, and endogenous compounds in serum can also be effectively eliminated. The cleanup efficiency is not only superior to hydrophile-lipophile balance column, but also close to acid silica gel and multifunction impurity sorbents. Generally, the developed cleanup method exhibited higher recovery for polybrominated diphenyl ethers with more than four bromines, especially for nona- and deca-brominated diphenyl ethers (99.1˗117.8%). The cleanup method can be coupled with gas chromatography and tandem mass spectrometry for polybrominated diphenyl ethers analysis in human serum. The method detection limits were 0.01˗0.27 ng/mL and average recovery was 50.9˗113.3%, except 2,3',4',6-tetrabrominated, 2,3',4,4',6-pentabrominated, and 2,3,3',4,4',5',6-heptabrominated diphenyl ethers. 2,2',4,5'-Tetrabrominated diphenyl ethers had the highest detection frequency (95%) in human serum, whereas decabrominated diphenyl ethers had the maximum mean concentration (0.50 ng/mL).     

Gas-phase reactions of brominated diphenyl ethers with OH radicals

A small volume reaction chamber coupled to a mass spectrometer was used to study the gas-phase kinetics and mechanism of the reaction of OH radicals with diphenyl ether and seven polybrominated diphenyl ethers (PBDEs) with 1-2 bromines. Relative rate constants for these reactions were determined using isopropyl nitrite photolysis in He-air mixtures at approximately 740 Torr between the temperatures of 326-388 K. The Arrhenius expression for each compound was used to extrapolate the following OH rate constants at 298 K (in units of 10(-12) cm3 molecule(-1) s(-1), with 95% confidence intervals): diphenyl ether, 7.45 +/- 0.13; 2-bromodiphenyl ether, 4.7; 3-bromodiphenyl ether, 4.6; 4-bromodiphenyl ether, 5.7; 2,2'-dibromodiphenyl ether, 1.3; 2,4-dibromodiphenyl ether, 3.8; 3,3-dibromodiphenyl ether, 3.2; and 4,4'-bromodiphenyl ether, 5.1. The measured OH rate constants are in reasonable agreement with those predicted by structure activity relationships. Positive temperature dependences of these OH rate constants are observed for all compounds measured except for diphenyl ether and 4,4'-dibromodiphenyl ether. Bromophenols (in yields up to 20% relative to the amount of PBDE consumed) and Br2 were characterized as products of these reactions, suggesting that OH addition to ipso positions of these brominated aryls may be an important reaction pathway.     

Synthesis of aromatic polyethers by Scholl reaction. I. Poly(1,1′-dinaphthyl ether phenyl sulfone)s and poly(1,1′-dinaphthyl ether phenyl ketone)s

A novel synthetic method for the preparation of high molecular weight aromatic polyethers is presented. It consists in the Scholl reaction of di(1-naphthyl) ethers of aromatic derivatives exhibiting lower nucleophilicity and higher oxidation potential than the 1-naphthoxy groups. The examples described in this paper refer to the synthesis of aromatic polyether sulfones and aromatic polyether ketones by the polymerization of 4,4′-di(1-naphthoxy)diphenyl sulfone and respectively 4,4′-di(1-naphthoxy)benzophenone. Both polymerization reactions are performed at room temperature in nitrobenzene, using anhydrous FeCl₃ as catalyst, and apparently follow a “reactive intermediate polycondensation” polymerization mechanism.     

Synthesis and characterization of 3-phenylethynyl endcapped matrix resins

The synthesis of 3-phenylethynylphenol, and its applicability as a high temperature cross-linking endcap for high T_g polyarylene ethers is described. It was synthesized in high yields and purity using the palladium catalyzed coupling reaction between the protected 3-bromo or iodo phenol and phenylacetylene. The yield of the reaction was found to be highly dependent on the structure of the halide used, the reaction temperature, and the concentration of phenylacetylene. The use of the protected phenol in the palladium catalyzed reaction was also extended to the high yield synthesis of 3-ethynylphenol and protected 4-ethynylphenols. The complete synthesis of 3-phenylethynylphenol, 3-ethynylphenol, and protected 4-ethynylphenol in high yields has been demonstrated and is discussed herein. Three new phenylethynyl functionalized arylene ether matrix resins have been synthesized in high yields and purity by reacting 3-phenylethynylphenol with 4,4′-dichlorodiphenyl sulfone, 4,4′-difluorobenzophenone, and bis(4-fluorophenyl)phenyl phosphine oxide, via nucleophilic poly(arylene ether) synthesis conditions. These low molecular weight materials undergo thermally induced chain extension/branching to yield an insoluble three-dimensional network at reaction temperatures of around 380°C. The low molecular weight arylene ethers endcapped with the phenylethynyl group demonstrate excellent flow characteristics and a wide processing window of about 250°C. Crosslinking of the 4,4′-bis(3-phenylethynyl phenoxy)diphenyl sulfone system for 30 min at 350°C in air afforded a T_g value of 265°C by differential scanning calorimetry measurements. Trace metal analysis for palladium and copper showed absence of these metals that would otherwise detract from the excellent thermal stability. The synthesis and characterization of these phenylethynyl endcapped arylene ether matrix resins is discussed. © 1995 John Wiley & Sons, Inc.     

邻苯二酚双苯醚的合成与抑菌活性研究

以硝基氯苯和羟基二苯醚为底物合成了6个硝基邻苯二酚双苯醚类化合物、6个氨基邻苯二酚双苯醚类化合物和6个羟基邻苯二酚双苯醚类化合物,所有这些新化合物的结构经元素分析、红外光谱、质谱及1H NMR确证.并研究了它们的抑菌活性,初步生物活性测试表明硝基、氨基芳醚类化合物的抑菌或杀菌活性较差,而羟基芳醚类化合物却有强的抑菌能力.     

Facile,one‐pot synthesis of aromatic diamine‐based phosphinated benzoxazines and their flame‐retardant thermosets

Three aromatic diamine‐based, phosphinated benzoxazines ( 7–9 ) were prepared from three typical aromatic diamines—4,4′‐diamino diphenyl methane ( 1 ), 4,4′‐diamino diphenyl sulfone ( 2 ), and 4,4′‐diamino diphenyl ether ( 3 ) by a one‐pot procedure. To clarify the reaction mechanism, a two‐pot procedure was applied, in which the reaction intermediates ( 4–6 ) were isolated for characterization. The structures of intermediates and benzoxazines were confirmed by high resolution mass, IR, and 1D and 2D‐NMR spectra. In addition to self‐polymerization, ( 7–9 ) were copolymerized with cresol novolac epoxy (CNE). After curing, the homopolymers of P( 7–9 ) are brittle while the copolymers of ( 7–9 )/CNE are tough. Dynamic mechanical analysis shows the T_gs of ( 7–9 )/CNE copolymers are 187, 190, and 171 °C, respectively. Thermal mechanical analysis shows the CTEs of ( 7–9 )/CNE copolymers are 46, 38, and 46 ppm, respectively. All the ( 7–9 )/CNE copolymers belong to an UL‐94 V‐0 grade, demonstrating good flame retardancy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of phthalazinone containing poly(arylene ether)s via a novel N–C coupling reaction

High‐molecular‐weight poly(phthalazinone)s with very high glass‐transition temperatures (T_g's) were synthesized via a novel N–C coupling reaction. New bisphthalazinone monomers ( 7a–e ) were synthesized from 2‐(4‐chlorobenzoyl) phthalic acid in two steps. Poly(phthalazinone)s, having inherent viscosities in the range of 0.34–0.91 dL/g, were prepared by the reaction of the bis(phthalazinone) monomers with an activated aryl halide in a dipolar aprotic solvent in the presence of potassium carbonate. The poly(phthalazinone)s exhibited T_g's greater than 230 °C. polymer 8b synthesized from diphenyl biphenol and bis(4‐flurophenyl) sulfone demonstrated the highest T_g of 297 °C. Thermal stabilities of the poly(phthalazinone)s were determined by thermogravimetric analysis. All the poly(phthalazinone)s showed a similar pattern of decomposition with no weight loss below 450 °C in nitrogen. The temperatures of 5% weight loss were observed to be about 500 °C. The poly(phthalazinone)s containing 4,4′‐isopropylidenediphenol and 4,4′‐(hexafluoroisopropylidene) diphenol and diphenyl ether linkage were soluble in chlorinated solvents such as chloroform. Other poly‐(phthalazinone)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(phthalazinone)s can be cast as flexible films from solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2481–2490, 2003     

Simultaneous construction of a polyether backbone and a variety of keto side chains by three‐component polycondensation: An improved method for the use of a variety of silyl enol ethers

For the synthesis of polyethers with a variety of keto side chains in a one‐step reaction, the three‐component polycondensation of dialdehydes, diol disilyl ethers, and silyl enol ethers of ketones was investigated. The method of monomer addition strongly affected the molecular weight of polymers and was optimized to yield high molecular weight polymers by model reactions. A variety of dialdehydes, diol disilyl ethers, and silyl enol ethers were polymerized in the presence of a catalytic amount of triphenylmethyl (trityl) perchlorate in CH₂Cl₂ at −78 °C according to the method of monomer addition. This polymer synthesis was unusual in that it concurrently constructed both the polyether backbone and the keto side chains from three starting compounds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 179–188, 2000     

Oxidation of 4-methoxy-1-naphthol on promoted platinum catalysts

Oxidative coupling of naphthols is a useful method for the formation of new carbon-carbon bonds in organic synthesis. In the presence of hydrogen peroxide, platinum supported on activated carbon catalyses this reaction. The outcome is influenced by the solvent, the reaction temperature and the physical structure of the catalyst. The catalyst structure is determined by the synthesis method and the modifier used (Bi or Sb). Within 40 min 4-methoxy-1-naphthol can be converted to 4,4'-dimethoxy-2,2'-binaphthalenyl-1,1'-diol with a yield of up to 94%, or to 4,4'-dimethoxy-2,2'-binaphthalenylidene-1,1'-dione with a yield of 92%. High amounts of quinoid byproducts (≤22%) are observed in nitromethane as the solvent.