The very far-infrared spectra of energetic materials and possible confusion materials using terahertz pulsed spectroscopy

We have measured the terahertz absorption spectra of 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX), pentaerythritol tetranitrate (PETN), 1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane (HMX), 2,4,6-trinitrotoluene (TNT), the plastic explosives Semtex H, SX2, and Metabel, and a number of confusion materials using terahertz pulsed transmission spectroscopy. Spectral fingerprints were obtained from 3 to 133 cm⁻¹. The spectra of the plastic explosives are dominated by the spectral signatures of their explosive components due to low frequency vibrations and crystalline phonon modes. Importantly, the terahertz spectra of the confusion materials show no resemblance to the explosives spectra. The refractive indices obtained for the plastic explosives and confusion materials allowed us to derive reflectance spectra, which appear distinct and so suggest that terahertz reflection spectroscopy is a suitable tool for the detection of concealed explosives in security applications.     

In Situ Explosive Detection Using a Miniature Plasma Ion Source and a Portable Mass Spectrometer

A small low-temperature plasma (LTP) ionization probe was coupled to a portable mass spectrometer for the rapid detection of trace explosives on surfaces. Using only a small diaphragm pump to supply ambient air to the LTP source, 100 ng each of pentaerythritol tetranitrate (PETN), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and 2,4,6-trinitrophenylmethylnitramine (Tetryl) were detectable on glass in under 1 minute. The main ion signal from these molecules (M) is the [M + NO₃]^? species. While much optimization remains, it is believed that this miniature LTP source will remove the need for external gas cylinders and additional heating for in situ explosives detection using portable mass spectrometers.     

Analysis of 2,4,6-trinitrotoluene, pentaerythritol tetranitrate and cyclo-1,3,5-trimethylene-2,4,6-trinitramine using negative corona discharge ion mobility spectrometry

In this study, the capability of negative corona discharge ion mobility spectrometry (IMS) for quantitative magnitude of several explosives including 2,4,6-trinitrotoluene (TNT), pentaerythritol tetranitrate (PETN) and cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX) has been evaluated for the first time. The total current obtained with the negative corona discharge was about 100 times larger than that of IMS based on ⁶³Ni, which results in a lower detection limit and a wider linear dynamic range. The detection limits for PETN, TNT and RDX were 8×10⁻¹¹, 7×10⁻¹¹ and 3×10⁻¹⁰ g, respectively. The calibration plots for these explosives showed linear dynamic ranges of about four orders of magnitude.     

Note on the use of the vacuum stability test in the study of initiation reactivity of attractive cyclic nitramines in Formex P1 matrix

The zero-order reaction rates (specific rate constants) of isothermal decomposition at 120 °C of plastic bonded explosives (PBXs) were measured by means of the Czech vacuum stability test, STABIL. The PBXs are based on 1,3,5-trinitro-1,3,5-triazinane (RDX), 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX), cis-1,3,4,6-tetranitro-octahydroimidazo-[4,5-d]imidazole (BCHMX), and ε 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (ε-HNIW, ε-CL-20) with 13 wt% of the Formex P1 type matrix, i.e., a matrix of the explosive with pentaerythritol tetranitrate (PETN) bound by 13 wt% of a mixture of 25 wt% of styrene–butadiene rubber and 75 wt% of an oily material. Dependencies were found between the specific rate constants mentioned and the detonation velocities of PBXs, and consequently between these constants and the impact and electric spark sensitivities of pure explosive fillers, i.e., RDX, HMX, HNIW, BCHMX, and PETN. It is stated that the higher impact or electric spark sensitivity of their pure explosive fillers corresponds to the higher thermal reactivity of the given PBXs.     

Qualitative analysis of trace constituents by ion mobility increment spectrometer

Ion mobility increment spectrometry (IMIS) is a high sensitive selective ionization technology for detection and identification of ultra-trace constituents, including toxic compounds, CW-agents, drugs and explosives in ambient air or liquid sample. Like an ion mobility spectrometry (IMS), this technology rests on sampling air containing a mixture of trace constituents, its ionization, spatial separation of produced ions and separated ions detection. Unlike IMS, ions of different types in IMIS are separated by ion mobility increment, α. Value α, is a function of the parameters: electric field strength and form, atmospheric pressure. To exclude the influence of these parameters on an α, the method of explosives identification by a standard compound was suggested. As a standard compound iodine was used. The relationship among the mobility coefficient increments equal to the relationship among the compensation voltage α_i/α_iodine=U_i/U_iodine is determined, where i are ions of 1,3-dinitrobenzene, 1,3,5-trinitrobenzene, p-mononitrotoluene, 2,4-dinitrotoluene and 2,4,6-trinitrotoluene This relationship is practically independent of the above mentioned parameters in the range 25<E/N<90 Td. The limits of the relative error of this relationship are determined both from spectra of individual compounds and nitrocompound-iodine mixtures.     

Thermal Analysis of Binary Systems. Explosive – lead compound

The thermal decomposition of explosives: pentaerythrol tetranitrate (PETN), 2,4,6-trinitrotoluene(TNT), cyclo-1,3,5-trimethylene-2,4,6-trinitroamine (RDX) and their two-component mixtures with 40% of lead compounds [PbO, Pb₃O₄, Pb(NO₃)₂] were performed. The simple method of determination of stability changes in the mixtures described above, in comparison with pure explosives was presented. The lead oxides accelerated significantly the thermal decomposition of explosives. Pb(NO₃)₂ acts as a catalyst in the mixture containing TNT degradation, but not in a case of PETN and RDX. This revised version was published online in August 2006 with corrections to the Cover Date.     

Determination of Explosives in Water Using Disposable Pipette Extraction and High Performance Liquid Chromatography

The use of disposable pipette extraction was examined for the simple and rapid determination of seven high explosives (cyclotrimethyl-enetrinitramine, cyclotetramethyl-enetetranitramine, 2,4,6-trinitrophenyl-methylnitramine, 2,4,6-trinitrotoluene, 2,4-dinitrotoluene, nitroglycerin, and pentaerythritol tetranitrate) in water. The current study involved the determination of slightly polar and nonpolar explosives in water with a reversed phase sorbent followed by high performance liquid chromatography. The method was based on a styrene divinylbenzene sorbent loosely placed inside a 5-mL pipette tip. Water samples were drawn into the tip and mixed with the sorbent. Air bubbles were also drawn through the tip following sample solution to enhance mixing. Because disposable pipette extraction uses small amounts of sorbent, minimal solvent is required to elute analytes and solvent evaporation is not necessary. The method provided rapid sample preparation, and required less than five minutes to extract 1.0 mL of water sample in the current study. Matrix-matched calibration was performed, and the limits of detection (LOD) were determined to be below 0.1 µg mL^?1 for all targeted explosives in water with an enrichment factor of two. Coefficients of determination (r²) were greater than 0.9990 for all studied explosives, and the recoveries ranged from 69.76% to 87.51%, 83.77% to 91.25%, and 83.62% to 98.99% for samples spiked at 0.25 µg mL^?1, 1.0 µg mL^?1, and 5.0 µg mL^?1, respectively. The relative standard deviations of recoveries at all spiked levels were below 8.97%. These results indicate that the disposable pipette extraction method provided good accuracy and precision for the determination of explosives in water.     

Solid phase microextraction ion mobility spectrometer interface for explosive and taggant detection

Ion mobility spectrometry (IMS) is a rugged, inexpensive, sensitive, field portable technique for the detection of organic compounds. It is widely employed in ports of entry and by the military as a particle detector for explosives and drugs of abuse. Solid phase microextraction (SPME) is an effective extraction technique that has been successfully employed in the field for the pre-concentration of a variety of compounds. Many organic high explosives do not have a high enough vapor pressure for effective vapor sampling. However, these explosives and their commercial explosive mixtures have characteristic volatile components detectable in their headspace. In addition, taggants are added to explosives to aid in detection through headspace sampling. SPME can easily extract these compounds from the headspace for IMS vapor detection. An interface that couples SPME to IMS was constructed and evaluated for the detection of the following detection taggants: 2-nitrotoluene (2-NT), 4-nitrotoluene (4-NT), and 2,3-dimethyl-2,3-dinitrobutane (DMNB). The interface was also evaluated for the following common explosives: smokeless powder (nitrocellulose, NC), 2,4-dinitrotoluene (2,4-DNT), 2,6-dinitrotoluene (2,6-DNT), 2,4,6-trinitrotoluene (2,4,6-TNT), hexahydro-1,3,5-trinitro-s-triazine (RDX), and pentaerythritol tetranitrate (PETN). This is the first peer reviewed report of a SPME-IMS system that is shown to extract volatile constituent chemicals and detection taggants in explosives from a headspace for subsequent detection in a simple, rapid, sensitive, and inexpensive manner.     

Reduction of trinitroaromatic compounds in water by chemical ionization mass spectrometry

A reduction process was found to occur in the ion source when observing the chemical ionization mass spectra of a series of trinitroaromatic compounds, using water as reagent. The [MH–30]⁺ ions in the CI mass spectra were due mainly to the reduction of the compounds to their corresponding amines. This was proved by using D₂O as reagent: the [MH–30]⁺ ions were shifted to [MD–28]⁺ ions. The trinitroaromatic compounds investigated included 1,3,5-trinitrobenzene, 2,4,6-trinitrotoluene, 2,4,6-trinitro-m-cresol, 2,4,6-trinitroaniline (picramide) and 2,4,6-trinitrophenol (picric acid).     

Identification of Nitro Explosives by Direct Analysis in Real-Time Time-of-Flight Mass Spectrometry

Nitro compounds such as 2,4,6-trinitrotoluene, cyclotrimethylene trinitramine, and pentaerythritol tetranitrate are common ingredients of high explosives found in homeland security threats, minefields, and industrial materials. This study aims at developing a convenient surface analysis method for rapid identification of these compounds by direct analysis in real time coupled with time-of-flight mass spectrometry. The possible ionization mechanisms and fragmentation pathways using the direct analysis in real-time ionization source were developed for each compound based on the ions produced by in-source collision-induced dissociation and acquired by a time-of-flight mass spectrometer. These compounds release nitro groups and form nitroless characteristic fragments with other nitro adducts during in-source collision-induced dissociation processes. The characteristic ion [M?+?C₂H₄N₃O₂]^? produced by cyclotrimethylene trinitramine was observed for the first time to our best knowledge. Direct analysis in real-time time-of-flight mass spectrometry has provided rapid identification of residues from various samples from explosion scenes and, therefore, is a potential powerful screening tool for criminal evidence.     

1-AminoTriazole Transition-Metal Complexes as Laser-Ignitable and Lead-Free Primary Explosives

This unique complex study describes two isomeric aminotriazoles as auspicious nitrogen-rich ligands for energetic coordination compounds (ECCs) to replace the commonly used highly poisonous and environmentally harmful lead-based primary explosives. The triazoles were obtained by easily scalable and convenient synthetic routes starting solely from commercially available starting materials. 1-Amino-1,2,3-triazole ( 1 , 1-ATRI) and, for the first time, 1-amino-1,2,4-triazole ( 2 , 1A-1,2,4-TRI) were employed as ligands to form highly energetic transition-metal(II) complexes. The desired characteristics could be altered successively by using various nonpoisonous metal(II) centers (Cu²⁺, Mn²⁺, Fe²⁺, and Zn²⁺) and anions (Cl⁻, NO₃⁻, ClO₃⁻, ClO₄⁻, picrate, styphnate, 2,4,6-trinitro-3-hydroxyphenolate, and 2,4,6-trinitro-3,5-dihydroxyphenolate). The 14 synthesized coordination compounds were characterized comprehensively by XRD, IR and UV/Vis spectroscopy, elemental analysis, and differential thermal and thermogravimetric analyses. Ball-drop impact, electrostatic discharge (ESD), and mechanical (impact and friction) sensitivities were determined according to BAM standard methods. In addition to laser ignition experiments, selected ECCs were evaluated in classical secondary explosive initiation tests (detonators filled with pentaerythritol tetranitrate (nitropenta)), which revealed their enormous potential and proved them to be very attractive for future applications in explosives.     

Method validation parameters for drugs and explosives in ambient pressure ion mobility spectrometry

An approach using method validation (MV) parameters, otherwise known as analytical figures of merit was combined with electrospray ionization high performance ion mobility spectrometry (ESI-HPIMS) to describe an approach for evaluating drugs and explosives analysis in the field. MV parameters such as reduced mobility (K _o ), conditional reduced mobility (K _c ), resolving power (R _p ), theoretical plates (N), linearity, accuracy, precision, limit of detection (LOD), limit of quantitation (LOQ), repeatability, range, and reporting limit were investigated and developed for eleven drugs and six explosives. Our investigation estimated resolving power at 66 ± 0.64 for the ESI-HPIMS used. The LOD’s calculated ranged from 0.45–2.97 ng of material electrosprayed into the ESI-HPIMS. The LOQ’s calculated falls in the range 4.11–8.63 ng of material electrosprayed into the ESI-HPIMS. The key findings from this investigation were the following: K _c proves to be a measure of the identity of an explosive or drug ion; a parameter that may be applied to help aid IMS devices when detecting drugs and explosives. MV parameters, especially, K _c , introduced in this study is an effective parameter for establishing a unique identity of a drug or explosive. A control chart is an effective way to monitor the performance of an instrument and may be a useful tool for establishing reliability of confirmatory data in forensic investigations. MV parameters may be a reliable, accurate and unique identification marker for target drugs and explosives capable of differentiating these substances from false positive responses.     

Fate dynamics of environmentally exposed explosive traces

The chemical and physical fates of trace amounts (<50 μg) of explosives containing 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and pentaerythritol tetranitrate (PETN) were determined for the purpose of informing the capabilities of tactical trace explosive detection systems. From these measurements, it was found that the mass decreases and the chemical composition changes on a time scale of hours, with the loss mechanism due to a combination of sublimation and photodegradation. The rates for these processes were dependent on the explosive composition, as well as on both the ambient temperature and the size distribution of the explosive particulates. From these results, a persistence model was developed and applied to model the time dependence of both the mass and areal coverage of the fingerprints, resulting in a predictive capability for determining fingerprint fate. Chemical analysis confirmed that sublimation rates for TNT were depressed by UV (330-400 nm) exposure due to photochemically driven increases in the molecular weight, whereas the opposite was observed for RDX. No changes were observed for PETN upon exposure to UV radiation, and this was attributed to its low UV absorbance.     

单向气流负电晕放电离子迁移谱的研究及其在爆炸物检测中的应用

基于离子迁移谱的爆炸物探测仪多采用放射性电离源,发展非放射性电离源一直是该技术的研究热点。本研究基于电晕放电原理设计了一种新型负电晕放电电离源结构,结合自行研制的离子迁移谱仪,应用于痕量爆炸物的快速、高灵敏检测。单向气流模式下,对此电离源的气流、放电电压等运行参数进行了系统优化,得到最佳实验条件为：电晕放电电离源结构的电极环孔直径为3 mm,针-环距离为2 mm,放电电压为2400 V,漂气流速为1200 mL/min。在此条件下,避免了放电副产物氮氧化物和臭氧等引发的一系列复杂反应,得到了单一的反应试剂离子O-2(H2O)n。将其应用于爆炸物,如2,4,6-三硝基甲苯(TNT)、硝酸铵(AN)、硝化甘油( NG)、太安( PETN)、黑索金( RDX)等的高灵敏快速直接检测,对TNT的检测限达到200 pg/μL。结果表明,此负电晕放电电离源具有灵敏度高、结构简单、无辐射性、反应试剂离子单一等优点,在爆炸物快速高灵敏检测、公共安全保障等方面具有广阔的应用前景。     

Micellar extraction and high performance liquid chromatography-ultra violet determination of some explosives in water samples

An analytical method based on the cloud point extraction combined with high performance liquid chromatography is used for the extraction, separation and determination of four explosives; octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazine (HMX), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), 2,4,6-trinitrotoluene (TNT) and pentaerythritol tetranitrate (PETN). These compounds are extracted by using of Triton X-114 and cetyl-trimethyl ammonium bromide (CTAB). After extraction, the samples were analyzed using a HPLC-UV system. The parameters affecting extraction efficiency (such as Triton X-114 and CTAB concentrations, amount of Na₂SO₄, temperature, incubation and centrifuge times) were evaluated and optimized. Under the optimum conditions, the preconcentration factor was 40 and the improvement factors of 34, 29, 61 and 42 with detection limits of 0.09, 0.14, 0.08 and 0.40 (μg L⁻¹) were obtained for HMX, RDX, TNT and PETN, respectively. The proposed method was successfully applied to the determination of these compounds in water samples and showed recovery percentages of 97-102% with RSD values of 2.13-4.92%.     

Heterogeneous photocatalytic transformations of s-triazine derivatives

Photocatalytic processes arising from irradiated semiconductor oxide suspensions containing 1,3,5-triazine (s-triazine) derivatives are described. Whereas unsubstituted 1,3,5-triazine undergoes hydrolysis, irrespective of the presence of the photocatalyst, other chloro-, amino-, mercapto-, allyloxo-, carboxy- derivatives give rise, in the presence of band-gap excited semiconductor oxide, to nearly stoichiometric formation of 2,4,6-trihydroxy-1,3,5-triazine (cyanuric acid). This last compound is stable toward photocatalytic conditions as well as to ^·OH chemically generated in homogeneous solution (H₂O₂/UV or Fenton's reagent). Only partial conversion in cyanuric acid is observed for 2,4,6-tris(2-pyridyl)-1,3,5-triazine and possible explanation is given. The formation of inorganic species (nitrate, chloride, sulfate and ammonium ions) is reported and the mechanism of their evolution presented.     

Fast gas chromatography-differential mobility spectrometry of explosives from TATP to Tetryl without gas atmosphere modifiers

Explosives in solution were determined as mixtures containing highly volatile improvised explosives such as peroxides and conventional military grade explosives such as PETN, RDX, and Tetryl using a high speed gas chromatograph with differential mobility detector in a single measurement. Instrument parameters were evaluated and adjusted to permit detection of nanogram amounts of explosives with this broad range of vapor pressures in times under 3 min for HMTD to TNT or under 16 min for HMTD to Tetryl. As in prior studies of response to explosives with mobility spectrometers, pre-separation of sample by gas chromatography improved response in the differential mobility detector; however, unlike prior configurations, the supporting gas atmosphere did not contain modifiers to adjust selectivity in mobility and selectivity was provided only by characteristic stability of product ions in negative and positive polarities. Field dependence of product ions in purified air was determined for each explosive and patterns were sufficiently distinct to suggest the addition of selectivity through the use of several differential mobility detectors operated in parallel or series with characteristic separation voltages.     

A fast method for monitoring of organic explosives in soil: a gas temperature gradient approach in LC–APCI/MS/MS

A novel, fast liquid chromatography atmospheric pressure chemical ionization mass spectrometry (LC–APCI–MS/MS) screening method was developed to determine the trace amounts of TNT (trinitrotoluene), RDX (1,3,5-trinitroperhydro-1,3,5-triazine), HMX (cyclotetramethylene-tetranitramine), PETN (pentaerythritoltetranitrate), TETRYL (2,4,6-trinitrophenyl-N-methylnitramine), picric acid (2,4,6 trinitrophenol), 2,6-DNT (2,6-dinitrotoluene), and TMETN (trimethylolethane-trinitrate) which contaminate the soil after explosion. A gradient of 2.00 mM ammonium nitrate aqueous solution-methanol mobile system, C18 column, and atmospheric pressure chemical ionization (APCI) (?) ionization mode was used after a single-step solid–liquid extraction procedure from soil matrix. Phenytoin was used as the internal standard. As an extraordinary application, gas temperature gradient in an APCI ionization was used. Analytes were selectively eluted from the system within 10 min. Average recovery obtained from the soil was between 93.01 and 104.20% at 250.0, 500.0, and 1000.0 ngg^?1 concentration levels. Limit of detection (LOD) and limit of quantification (LOQ) values obtained from the analysis of the soil samples including explosive mix were between 8.9–161.2 and 13.2–241.5 ngg^?1, respectively.     

In-situ detection of single particles of explosive on clothing with confocal Raman microscopy

Confocal Raman microscopy is shown to detect picogram quantities of explosives in-situ on undyed natural and synthetic fibres, and coloured textile specimens leaving potentially evidential materials unaltered. Raman spectra were obtained from pentaerythritol tetranitrate (PETN), trinitrotoluene (TNT), and ammonium nitrate particles trapped between the fibres of the specimens. Despite the presence of spectral bands arising from the natural and synthetic polymers and dyed textiles, the explosive substances could be identified by their characteristic Raman bands. Furthermore, Raman spectra were obtained from explosives particles trapped between highly fluorescent clothing fibres. Raman spectra were collected from explosives particles with maximum dimensions in the range 5-10 μm. Spectra of the explosives on dyed and undyed clothing substrates were readily obtained in-situ within 90 s and without sample preparation.     

Paper spray ionization with ion mobility spectrometry at ambient pressure

A paper spray ion source was combined with a drift tube operating at ambient pressure for mobility measurements of ions derived from pharmaceutical solutions. Paper spray ionization with solvent alone resulted in a mixture of ions convolved to a single peak with a reduced mobility of 2.19 cm²/Vs in the mobility spectrum. These were mass-identified principally as m/z 157, (MeOH)₂(HCOOH)₂H⁺ and m/z 129, (MeOH)₄(H₂O)H⁺ while pharmaceuticals with nitrogen bases formed MH⁺ product ions. The duration of response was governed by the volume of liquid added to the paper source and was limited by evaporation of solvent in gas at 58 °C venting the drift tube. Quantitative variation was attributed in part to morphologic changes in the tip of the paper spray source. This was associated with mass flow in the electrical discharge and not due alone to cycles of wetting and drying of the paper. Mobility spectra of chlorpromazine in urine, exhibited a single product ion peak and linear response was 30 to 500 ng with an estimated limit of detection of 1.5 ng. Ion flux could be prolonged by continuous addition of liquid and findings portend a combination of paper spray ionization IMS with paper chromatography.