含氟/PEG的有机硅基双亲防污涂层的制备及性能

以不同分子量的端氢硅油(PDMS)和聚乙二醇二烯丙基醚(PEGDE)为原料,通过硅氢加成合成了系列双键封端的含有机硅和聚乙二醇(PEG)链段的多嵌段共聚物(PDMS-b-PEG)m,再用三甲氧基氢硅烷进行端基官能化,生成三甲氧基硅烷封端的多嵌段聚合物,即含PEG前驱物.含PEG前驱物、含氟前驱物(FMS-9922)与有机硅基体树脂通过缩合聚合制备了含PEG的氟硅双亲弹性防污涂层.通过核磁共振氢谱、红外光谱对PEG前驱物的结构进行了表征.吸水率、SEM-EDS和接触角测试考察了含PEG前驱物中疏水链段的长度,含氟前驱物的含量对涂层表面重排的影响,结果表明PEG前驱物中疏水链段越长,涂层的吸水率越低,在水中越稳定,且表面不易发生重排.而含氟前驱物的加入能促使PEG链段向表面方向迁移.抗蛋白、抗菌和抗藻附着性能测试表明:含有FMS-9922的样品防污性能均优于不含FMS-9922的样品,而且随着FMS-9922用量增加,涂层防污性能呈上升趋势;但是FMS-9922用量太高时,体系相容性下降,防污性能也随之变差,故FMS-9922的含量控制在7%为宜.     

氟硅协同改性丙烯酸树脂的合成与防污性能研究

以甲基丙烯酸十二氟庚酯(FMA)、甲基丙烯酸聚二甲基硅氧烷基酯(SMA)、甲基丙烯酸甲酯、丙烯酸正丁酯、甲基丙烯酸正丁酯和丙烯酸乙酯为共聚单体,通过溶液聚合反应合成出侧链含有机氟、有机硅的丙烯酸树脂.通过核磁共振氢谱(1H-NMR)、核磁共振氟谱(19F-NMR)、红外光谱(FTIR)对聚合物的结构进行了表征.通过扫描电镜(SEM)、接触角测试和生物评价等方法,探讨了FMA、SMA含量对树脂涂膜性能的影响.结果表明氟硅改性的丙烯酸树脂比单独含氟或含硅改性的丙烯酸树脂具有更低的表面能,而且氟硅改性的丙烯酸树脂涂膜比商业化的聚硅氧烷涂膜具有更好的防污性能.     

含硅氧烷结构聚酰亚胺树脂的耐热稳定性及高温结构演变

基于含硅芳香二胺双(4-氨基苯氧基)二甲基硅烷(APDS)设计制备了系列苯乙炔基封端的含硅氧烷结构聚酰亚胺树脂预聚物(PEPA-PIS), 考察了硅氧烷含量对树脂固化物耐热稳定性的影响规律. 利用非反应性苯酐基团封端的模型预聚物(PA-PIS)证明了温度对于硅氧烷结构演变的影响. 通过对树脂固化物高温固化处理后耐热稳定性与微观结构和表面形貌的关系进行深入研究, 发现在高温下硅氧烷结构发生氧化交联反应, 并在树脂表面形成具有无机特性的二氧化硅结构, 这种有机/无机杂化特性可显著提高聚酰亚胺树脂的耐热稳定性.     

叶酸修饰的具有靶向功能的Mn_3O_4造影剂的制备及其在核磁共振成像中的应用

通过高温热解的方法制备出Mn3O4纳米粒子,再利用正硅酸四乙酯(TEOS)包硅改善其水溶性和稳定性,通过加入3-氨基丙基三乙氧基硅烷(APTES)使纳米粒子表面接入大量氨基,最后再连接增加磁性纳米粒子生物相容性的有机分子聚乙二醇(PEG)和靶向分子叶酸(FA),得到Mn3O4靶向造影剂.体外实验表明,该造影剂具有低的细胞毒性,并对宫颈癌细胞具有较好的磁共振增强成像效果以及主动靶向作用.     

聚对二氧环己酮/聚乙二醇多嵌段共聚物的合成与表征

首先合成双端羟基的聚对二氧环己酮预聚物(PPDO)和双端羧基的聚乙二醇预聚物(PEG),然后以丁二酸酐/二环己基碳二亚胺(DCC)将PPDO与PEG偶联共聚,得到PPDO/PEG多嵌段共聚物.通过1H-NMR和GPC表征了聚合物的结构和分子量.采用差示扫描量热法(DSC)和热重分析(TGA)研究了共聚物的结晶性能和热稳定性.用透析法制备了共聚物纳米粒子,并用动态光散射(DLS)表征了共聚物纳米粒子的粒径及分散度,结果表明,随着共聚物亲水链段PEG含量的增加,其纳米粒子更易形成,粒子粒径随共聚物分子量增大而增大.     

硅烷改性纳米ZrO2对镁锂合金表面环氧树脂涂层耐蚀性能的影响

采用涂覆法在镁锂合金表面制备了含双-[3-(三乙氧基硅)丙基]四硫化物(KH-69硅烷)改性纳米ZrO₂的环氧树脂涂层. 通过傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和电化学阻抗谱(EIS)等手段表征了该涂层. 考察了KH-69硅烷改性纳米ZrO₂浓度对环氧树脂涂层耐蚀性能的影响. 结果表明, KH-69硅烷改性纳米ZrO₂能显著提高镁锂合金表面环氧树脂涂层的耐腐蚀性能, 其中1.0%(质量分数) KH-69硅烷改性纳米ZrO₂环氧树脂涂层具有较好的耐蚀性能. 在NaCl溶液中浸渍528 h后的低频阻抗值为1.6×10⁹ Ω·cm², 相比在NaCl溶液中浸渍240 h的纯环氧树脂涂层提高约5个数量级.     

新型环氧丙烯酸树脂增韧剂的合成

用马来酸酐和聚乙二醇1000合成具有反应活性端基的聚乙二醇,用红外与核磁共振进行了表征,并用其对环氧丙烯酸树脂进行改性;研究反应温度、反应时间对反应及产物性能的影响;用红外对反应性聚乙二醇和环氧丙烯酸树脂的固化物进行分析.结果表明,反应性聚乙二醇参与了环氧丙烯酸树脂的固化反应,可在交联网络中构成不同长度的柔性链段,显著地提高了环氧丙烯酸树脂的冲击强度.     

丙烯酸酯三元共聚物负载硫铂络合物的合成及催化性能

丁二醇二丙烯酸酯、丙烯酸甲酯、丙烯酸β-氯乙酯或丙烯酸ω-氯己酯进行三元共聚,合成了两类4种带ω-氯侧基的交联型聚丙烯酸酯.它们以乙硫醇硫醚化,再与氯亚铂酸钾反应,得到4种交联型聚丙烯酸酯负载的硫铂络合物.这些络合物对癸烯-1、十二烯-1、苯基烯丙醚、苯乙烯与三乙氧基硅烷的硅氢加成反应具有良好的催化活性.讨论了温度、催化剂用量对催化性能的影响及催化剂的重复使用情况.     

溶菌酶蛋白在聚合物防污膜表面的吸附

采用分子动力学模拟方法比较了溶菌酶蛋白在两种典型聚合物防污材料聚乙二醇(PEG)和聚二甲基硅氧烷(PDMS)表面的吸附行为,在微观上探讨了聚合物膜表面性质对蛋白质吸附的影响.根据蛋白质与聚合物膜之间的相互作用、能量变化及表面水化层分子的动力学行为,解释了PEG防污涂层相对于PDMS表面具有更佳防污效果的原因:(1)相比PDMS涂层,蛋白质与PEG涂层的结合能量较低,使其结合更加疏松;(2)蛋白质吸附到材料表面要克服表面水化层分子引起的能障,PEG表面与水分子之间结合紧密,结合水难于脱附,造成蛋白质在其表面的吸附需要克服更高的能量,不利于蛋白质的吸附.     

溶菌酶蛋白在聚合物防污膜表面的吸附

采用分子动力学模拟方法比较了溶菌酶蛋白在两种典型聚合物防污材料聚乙二醇(PEG)和聚二甲基硅氧烷(PDMS)表面的吸附行为, 在微观上探讨了聚合物膜表面性质对蛋白质吸附的影响. 根据蛋白质与聚合物膜之间的相互作用、能量变化及表面水化层分子的动力学行为, 解释了PEG防污涂层相对于PDMS表面具有更佳防污效果的原因: (1) 相比PDMS涂层, 蛋白质与PEG涂层的结合能量较低, 使其结合更加疏松; (2) 蛋白质吸附到材料表面要克服表面水化层分子引起的能障, PEG表面与水分子之间结合紧密, 结合水难于脱附, 造成蛋白质在其表面的吸附需要克服更高的能量, 不利于蛋白质的吸附.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.