聚乙烯醇无卤阻燃研究进展

鉴于环保的压力,无卤阻燃剂逐渐替代含卤阻燃剂,用在聚乙烯醇(Polyvinyl alcohol,PVA)阻燃处理中。本文综述了近年来无卤阻燃PVA的最新研究进展,总结分析了无机型阻燃剂、磷系阻燃剂、氮系阻燃剂、膨胀型阻燃剂及反应型阻燃剂对PVA的阻燃研究现状,介绍了不同类型阻燃剂的阻燃机理、优缺点以及典型阻燃剂对PVA阻燃性质和力学性质的影响;在此基础上讨论了PVA阻燃的独特性,充分利用PVA的结构特征,研制出适合PVA加工方式的阻燃剂复配配方是PVA阻燃研究的主要发展方向。     

阻燃聚乙烯的裂解气相色谱研究

选择450、500、550、600、650、700℃等不同裂解温度，保持基本一致的进样量(60士1pg)，采用连续升温和分别升温的方法，对聚乙烯及阻燃聚乙烯进行裂解气相色谱(PyGC)分析，比较其性能的差异以及加有不同量阻燃剂的PE的裂解色谱性能．结果表明Si02含量不同的阻燃聚乙烯有较明显的阻燃性能，其中SiO2添加量为6％时阻燃效果最好,PyGC的分析结果与锥形量热仪(CONE)的实验结果相一致．     

阻燃有机玻璃研究进展

有机玻璃属于易燃材料,存在严重的火灾隐患,其阻燃配方设计需要同时对聚甲基丙烯酸甲酯进行耐热改性和阻燃设计,并兼顾热变形性和机械性能等方面.改善耐热性主要通过在聚甲基丙烯酸甲酯上增加链段刚性、主价交联和副价交联,从而减缓甲基丙烯酸甲酯的分解,减少阻燃配方设计时阻燃剂用量.为了设计高玻璃化转变温度的材料,提高阻燃有机玻璃的力学性能,应尽可能降低添加型和可聚合型磷酸酯类阻燃剂的用量,其中可聚合磷酸酯类阻燃剂是今后阻燃有机玻璃技术发展的重要方向.在透明度要求不高的领域,采用二氧化硅纳米粉、氧化锌纳米棒、磷酸铝和石墨烯片状纳米材料与阻燃剂复配也可以得到良好的阻燃效果.     

三（2，4，6－三溴苯氧基）锑酸酯的合成及其阻燃性能与阻燃机理

合成了三（２，４，６－三溴苯氧基）锑酸酯，通过元素分析和ＩＲ光谱予以表征，并就其对聚乙烯和聚丙烯的阻燃性能与阻燃机理进行了研究。结果表明：这种分子中同时含有溴、锑的阻燃剂，比相应的仅含溴和仅含锑的阻燃剂混合物具有更高的阻燃性能。     

三（2,4,6—三溴苯氧基）锑酸酯的合成及其阻燃性能与阻燃机理

合成了三（２，４，６－三溴苯氧基）锑酸酯，通过元素分析和ＩＲ光谱予以表征，并就其对聚乙烯和聚丙烯的阻燃性能与阻燃机理进行了研究。结果表明：这种分子中同时含有溴、锑的阻燃剂，比相应的仅含溴和仅含锑的阻燃剂混合物具有更高的阻燃性能。     

含氢氧化镁的阻燃硅烷交联聚乙烯

在硅烷交联聚乙烯体系中 ,添加氢氧化镁阻燃剂制备无卤阻燃的硅烷交联聚乙烯。详细讨论了硅烷和氢氧化镁用量对材料力学性能及阻燃性能的影响。采用了拉伸性能试验、氧指数试验和锥形量热计试验对交联物的性能进行了表征。     

次磷酸铝协同硼酸锌阻燃聚乙烯

以次磷酸铝(AHP)和硼酸锌(ZB)为复合阻燃剂,通过熔融共混法制备了阻燃聚乙烯(PE)材料,研究了AHP和ZB对PE的协同阻燃效应。 结果表明,AHP、ZB阻燃剂在PE基体中分散均匀;添加质量分数为25%AHP阻燃剂,PE材料的极限氧指数值(LOI)提升至25%,通过垂直燃烧测试(UL-94(3.2 mm))V-2级,显示出良好的阻燃效果;引入ZB后,材料LOI值呈先升高后下降趋势,在m(AHP):m(ZB)=21:4时,出现峰值,达到27.2%,并通过UL-94(3.2 mm)V-1级;热失重分析(TGA)结果显示,AHP、ZB阻燃剂能同时提高PE材料的热稳定性和成炭率,当m(AHP):m(ZB)=17:8时,残渣率达到25.7%。     

无机阻燃剂协同阻燃聚合物研究进展

无机阻燃剂协同阻燃体系可降低阻燃剂用量,增强阻燃效果,提高聚合物的耐热性能、加工性能和机械性能,已成为阻燃技术一个重要发展方向。本文综述了无机阻燃剂间的协同阻燃体系在不同聚合物阻燃中的研究进展,对单一阻燃剂和协同阻燃体系的阻燃作用机理、阻燃性能进行了分析总结,着重阐述了铝-镁系和可膨胀石墨等协同阻燃体系,指出各体系的阻燃机理、复配比例、添加量以及协同阻燃效应,并展望了无机阻燃剂协同阻燃体系的发展趋势。     

膨胀型环状类磷酸酯蜜胺盐阻燃剂的合成及阻燃聚丙烯的结构与性能

以双季戊四醇、三季戊四醇、多聚磷酸、五氧化二磷和三聚氰胺为原料,合成了膨胀型环状类磷酸酯蜜胺盐阻燃剂,并与聚丙烯共混制成阻燃聚丙烯.红外分析表明该阻燃剂具有环状结构.通过扫描电镜和X射线衍射对阻燃聚丙烯进行了结构分析和表面纹理的表征.实验结果表明：该阻燃剂阻燃性能良好,但在聚丙烯中的分散性较差;用甲基纤维素对该阻燃剂进行表面化学修饰以后,该阻燃剂在聚丙烯中的分散性及阻燃材料的机械性能得到了明显的改善.     

气相色谱-质谱法测定发泡聚苯乙烯材料中六溴环十二烷的含量

正六溴环十二烷(HBCD)是一种高溴含量的脂环族添加型阻燃剂,具有用量低,阻燃效果好、对材料物理性能影响小等特点,主要用作聚苯乙烯、聚丙烯、高抗冲聚苯乙烯、丙烯腈-丁二烯-苯乙烯塑料(ABS)、聚乙烯、聚碳酸酯、不饱和聚酯等材料的阻燃剂[1]。此外,还适用于对针织物、丁苯胶、黏合剂、涂料以及不饱和聚酯树脂进行阻燃处理。HBCD理论上有16种非对映异构体,但其工业产品主要是     

Thermal decomposition of polymer mixtures of PVC,PET and ABS containing brominated flame retardant: Formation of chlorinated and brominated organic compounds

The thermal decomposition of various mixtures of acrylonitrile butadiene styrene copolymer (ABS), ABS containing brominated epoxy resin flame retardant and Sb₂O₃, poly(ethylene terephthalate) (PET) and poly(vinyl chloride) (PVC) has been studied in order to clarify the reactions between the components of mixed polymers. More than 40 halogen-containing molecules have been identified among the pyrolysis products of mixed samples. Brominated and chlorinated aromatic esters were detected from the mixtures containing PET and halogen-containing polymers. A series of chlorinated, brominated and mixed chlorinated and brominated phenols and bisphenol A molecules have been identified among the pyrolysis products of polymer mixtures containing flame retarded ABS and PVC. It was established that the decomposition rate curves (DTG) of the mixtures were not simple superpositions of the individual components indicating interactions between the decomposition reactions of the polymer components. The maximal rate of thermal decomposition of both ABS and PET decreases significantly if the mixture contains brominated epoxy flame retardant and Sb₂O₃ synergist. The dehydrochlorination rate of PVC is enhanced in the presence of ABS or PET.     

Physico-Mechanical Characteristics of Some EPDM/Plasticized PVC Blends

Summary: In this study were prepared blends based on ethylene propylene terpolymer rubber (EPDM) and plasticized poly (vinyl chloride) (PVC). These blends are immiscible and need to be compatibilized. The following compatibilization methods were used: (1) addition of a compatibilization agent; there were used: maleinized EPDM, maleinized polyethylene (PE), chlorinated polyethylene (CPE) and maleinized polypropylene (PP); chlorinated polyethylene has proved to be the most efficient; the amount of the added CPE giving the best physico-mechanical characteristics was of 7,5 parts to 100 polymer parts; (2) reactive compatibilization, using crosslinked copolymer formation strategy; three different crosslinking systems were used: (a) common method with sulphur and accelerators, (b) crosslinking with benzoyl peroxide and trimethylpropane trimethacrylate (TMPT DL 75), (c) vulcanization with phenol resin and tin chloride. The best physico-mechanical characteristics were obtained with the EPDM/plasticized PVC blends crosslinked with 8 phr phenol resin. Such types of polymer blends can be processed by methods specific for plastics, removing thus vulcanization operation required in case of elastomers. These blends can be used in the manufacture of hoses, gaskets, footwear constituents etc.     

固相法氯化聚乙烯对PVC／LLDPE共混体系性能和形态的影响

采用固相法氯化聚乙烯（ＣＰＥ）对聚氯乙烯／线型低密度聚乙烯（ＰＶＣ／ＬＬＤＰＥ）共混体系进行增容改性。扫描电子显微镜、透射电子显微镜、动态力学分析和力学性能测试结果表明，ＣＰＥ对ＰＶＣ／ＬＬＤＰＥ共混体系具有很好的增容作用。     

Miscibility behavior of di(ethyl-2 hexyl) phthalate in binary and ternary chlorinated polymer blends

The miscibility behavior of ternary blends made by the addition of di(ethyl-2 hexyl) phthalate (DOP) to a mixture of chlorinated polymers was investigated by differential scanning calorimetry. Two chlorinated polymer mixtures were selected: polyvinyl chloride (PVC) with a chlorinated polyethylene containing 48 wt% Cl (CPE48), and PVC with a chlorinated PVC containing 67 wt% Cl (CPVC67). Each binary DOP/chlorinated polymer pair is miscible whereas PVC/CPE48 and PVC/CPVC67 blends are immiscible. DOP/CPE48/PVC and DOP/PVC/CPVC67 ternary blends containing, respectively, more than 55 and 20% DOP exhibit a single glass transition temperature (T_g). The spinodal between the one-T_g zone and the two-T_g zone is symmetrical in the two cases. At high DOP concentrations, a quantitative analysis of the results leads to the conclusion of the presence of a true ternary phase. At low DOP concentrations where two T_gs are observed, the DOP is distributed equally between the two chlorinated polymers forming, in the DOP/CPE48/PVC case for instance, two binary DOP/CPE48 and DOP/PVC phases. The broad immiscibility zone observed in the DOP/CPE48/PVC ternary blend as compared to the DOP/PVC/CPVC67 blend appears to be mainly caused by the high molecular weight of CPE48, as compared with PVC and CPVC67. © 1994 John Wiley & Sons. Inc.     

A novel approach to synthesis of functional CPVC and CPE or graft copolymers—in situ chlorinating graft

A new process of graft copolymerization of poly(vinyl chloride) (PVC) and polyethylene (PE) with other monomers was developed. The grafted chlorinated poly(vinyl chloride) (CPVC) and chlorinated polyethylene (CPE) were synthesized by in situ chlorinating graft copolymerization (ISCGC) and were characterized. Convincing evidence for grafting and the structure of graft copolymers was obtained using FT‐IR, ¹H‐NMR, gel permeation chromatography (GPC), and the vulcanized curves. Their mechanical properties were also measured. The results show that the products have different molecular structure from those prepared by other conventional graft processes. Their graft chains are short, being highly branched and chlorinated. The graft copolymers have no crosslinking structure. The unique molecular structure will make the materials equipped with special properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Dynamic and Isothermal Thermogravimetric Degradation of Poly(vinyl Chloride)/Chlorinated Poly(ethylene) Blends

The thermal degradation of poly(vinyl chloride)/chlorinated poly(ethylene) (PVC/CPE) blends of different compositions was investigated by means of dynamic and isothermal thermogravimetric analysis in flowing atmosphere of nitrogen. Kinetic parameters (the apparent activation energy E, and pre-exponential factor Z) were calculated after Flynn-Wall-Ozawa method for the first stage of dynamic degradation of PVC/CPE blends, and after Flynn method for the isothermal degradation. In both cases, there is the compensation dependence between the values E and logZ. The values of compensation ratios as well as the characteristics of TG and DTG curves, confirm the stabilizing effect of CPE on PVC dehydrochlorination. This revised version was published online in July 2006 with corrections to the Cover Date.     

固相氯化法氯化聚乙烯晶粒尺寸的X射线衍射研究

晶粒尺寸的测定常用付里叶变换法^[1]和积分宽度法^[2],这两种方法都要求样品相应于某个晶面至少存在三个级别的衍射峰,而对聚合物来说,观察到高级衍射峰的情况是很少见的.方差函数法不要求样品存在三个级别的衍射峰,而且方法简单,曾广泛用于金属材料晶粒尺寸和点阵畸变的测定^[3-5],但在聚合物材料中的应用甚少^[6].本文采用方差函数法对固相氯化法氯化聚乙烯(CPE)和原料聚乙烯(PE)的晶粒尺寸和点阵畸变参数进行了研究,得到了较为满意的结果.     

纳米级CaCO_3粒子与弹性体CPE微粒同时增韧PVC的研究

研究了平均粒径为 30nm的超细级纳米CaCO3 与氯化聚乙烯 (CPE)对聚氯乙烯 (PVC)共混体系二元协同增韧效应及机制 .结果表明 ,当共混体系中有一定量的CPE时 ,纳米CaCO3 的加入可以明显地提高共混物的韧性 ,而不降低共混物的强度和刚性 .纳米CaCO3 在PVC基体中达到了纳米级的分散 .当纳米CaCO3 的用量为 8份 (质量 )时 ,PVC CPE 纳米CaCO3 共混物的冲击断面产生了大量的有规则的网丝状结构 ,共混物的缺口冲击强度达到 81 1kJ m2 ,比不加纳米CaCO3 的共混体系高 7 3倍 .CPE的加入对共混体系的加工流动性能无影响 ,纳米CaCO3 的加入使共混体系的加工流动性能变差     

Thermooxidative degradation of poly(vinyl chloride) and chlorinated polyethylene with different Ca/Zn carboxylates

The thermooxidative degradation of poly(vinyl chloride) (PVC), chlorinated polyethylene (CPE) and PVC/CPE blend 50/50 was investigated by means of dynamic and isothermal thermogravimetric analysis in the flowing atmosphere of air. To estimate the thermooxidative stability of the samples the characteristics of thermogravimetric (TG) curves were used. Kinetic parameters (the apparent activation energy E and preexponential factor Z) were calculated after isoconversional method for the first stage of dynamic degradation where dehydrochlorination (DHCl) of PVC and/or CPE is the main degradation reaction. Despite the chemical resemblance, the degradation mechanisms of CPE and PVC are different, as a consequence of differences in microregularity of the corresponding polymer chains. The addition of Ca/Zn carboxylates as well as the ratio of Ca and Zn carboxylates have considerably different influence on the investigated polymers. This revised version was published online in August 2006 with corrections to the Cover Date.     

RPS／CPE的反应性共混及其对PS／PE的增容作用

用ＦＴＩＲ、ＤＳＣ等方法研究了含恶唑啉官能力的聚苯乙烯（ＲＰＳ）与氯化聚乙烯（ＣＰＥ）之间的反应。ＲＰＳ、ＣＰＥ、ＰＳ、ＰＥ在不同温度下用反应式挤出要熔融共辊，结果表明，ＲＰＳ／ＣＰＥ对ＰＳ／ＰＥ共混物具有增容作用，提高了共混物的力学性能。此反应性共混适宜在较低温度下进行，对ＲＰＳＣＰＥ共混物还进行了动态力学表征，并与ＲＰＳ进行比较以进一步了解共混物的特征。