F− Preference of Polyamide Cryptand to Cl−

The variations in geometry structure, IR spectra, as well as the molecular orbitals upon anion recognition for polyamide cryptand are explored with the hybrid density functional theory. The cavity generated by six amide NH groups shrinks upon F ^? recognition because of the strong hydrogen bonds between the amide protons and F ^? , while the cavity expands upon Cl ^? binding because of the strong electron repulsion between the p electron of Cl ^? and the lone pair electrons of the nitrogen atom of the pyridine moieties. The “electropositive field space” …Cl ^? coupling exists when Cl ^? is recognized. The strong anion binding energy with F ^? indicates that the polyamide cryptand prefers F ^? to Cl ^? .     

Chromatography of Anions on Alumina Thin Layers: Effect of Transition Metals on CI−-Br−-I− and No− 2-NO− 3 Separations

Abstract

Chromatographic behaviour of eighteen anions on thin layers of alumina and alumina mixed with silica gel (1:1, 1:2 and 2:1) has been studied using mixed acidic organic solvent systems containing formic acid. Though the addition of silica gel to alumina enhances the mobility and clarity of detection of anions, but it causes the increased tailing for Fe(CN)^3- ₆, Cr0₄ ^2- and Cr₂O₄ ^2-. Formic acid is responsible for the differential migration of anions. All the anions remained at the starting line (R_F = 0) in pure organic solvents. Formic acid-Ketone systems gave better results compared to formic acid-alcohol systems. Development time increases with the increase of viscosity/mol. wt. of organic solvents. The mutual separation of C1, Br^?, Br^?, I^? and NO^? ₂ and NO^? ₃ were achieved on pure alumina using formic acid-acetone solvent systems. The effect of transition metals (Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn) on C1^?-Br^?-I^? and NO^? ₂-NO^? ₃ separations has been studied.     

Synthesis of metal−organic complex arrays

The Merrifield solid-phase peptide synthesis technique has been adapted to the synthesis of homo- and heterometallic metal?organic complex arrays (MOCAs). A terpyridine-appended and Fmoc-protected L-tyrosine derivative was metalated with Pt(II), Rh(III), or Ru(II) ions in solution and sequentially coupled at the surface of functionalized polymeric resin to give a metal complex triad (Rh?Pt?Ru), tetrad (Ru?Rh?Pt?Pt), pentad (Rh?Pt?Ru?Pt?Rh), and hexad (Rh?Pt?Ru?Pt?Rh?Pt) with specific metal sequence arrangements. These were cleaved from the resin, and their character was confirmed by mass spectrometry.     

Sorption of131I− by hydrotalcites

In this work, hydrotalcites were used to remove¹³¹I^? from aqueous solutions. It was found that¹³¹I^? sorption by hydrotalcites depends greatly on the thermal treatment of the solid and does not take place by ion exchange as I^? is not capable of removing CO ₃ ^?2 or other ions in the hydrotalcite. The anions have to be removed from the solid in order to permit I^? to be sorbed in the hydrotalcite. The radionuclide content was determined by γ-spectrometry and X-ray diffraction was used to identify the compounds and to estimate cell parameters.     

Formal γ−C−H Functionalization of Cyclobutyl Ketones: Synthesis of cis-1,3-Difunctionalized Cyclobutanes

1,3-Difunctionalized cyclobutanes are an emerging scaffold in medicinal chemistry that can confer beneficial pharmacological properties to small-molecule drug candidates. However, the diastereocontrolled synthesis of these compounds typically requires complicated synthetic routes, indicating a need for novel methods. Here, we report a sequential C−H/C−C functionalization strategy for the stereospecific synthesis of cis-γ-functionalized cyclobutyl ketones from readily available cyclobutyl aryl ketones. Specifically, a bicyclo[1.1.1]pentan-2-ol intermediate is generated from the parent cyclobutyl ketone via an optimized Norrish-Yang procedure. This intermediate then undergoes a ligand-enabled, palladium-catalyzed C−C cleavage/functionalization to produce valuable cis-γ-(hetero)arylated, alkenylated, and alkynylated cyclobutyl aryl ketones, the benzoyl moiety of which can subsequently be converted to a wide range of functional groups including amides and esters.     

Aryne-Enabled C−N Arylation of Anilines

Anilines are potentially high-value arylating agents, but are limited by the low reactivity of the strong C−N bond. We show that the reactive intermediate benzyne can be used to both activate anilines, and set-up an aryl transfer reaction in a single step. The reaction does not require any transition metal catalysts or stoichiometric organometallics, and establishes a metal-free route to valuable biaryl products by functionalizing the aniline C−N bond.     

Nonempirical calculations of the potential-energy fields of the nucleophilic addition of H− and F− to acetylene and methylacetylene molecules

By using the basis 3–21 + G, the minimum-energy routes for the nucleophilic addition to the F^– ion to methylacetylene have been calculated within the framework of the Hartree-Fock-Roothaan method according to and against the Markovnikov rule with the formation of the 1-fluoropropenyl and 2-fluoropropenyl anions. The results have been compared with data from previous calculations of the nucleophilic addition of H^– and F^– to acetylene with the formation of vinyl and fluorovinyl anions, as well as of the nucleophilic addition of H^– to methylacetylene according to and against the Markovnikov rule with the formation of the 1-propenyl and 2-propenyl anions. It has been established that the reaction with H^– is exothermic, while the reaction with F^– is endothermic. The activation energies of the reactions with F^– are lower than the activation energies of the corresponding reactions with H^–. It is shown that the reactions with H^– have a relatively early transition state, while the reactions with F^– are characterized by a later transition state.Translated from Teoreticheskaya i Éxperimental'naya Khimiya, Vol. 28, No. 1, pp. 5–11, January–February, 1992.     

Hydrothermal processing and characterization of Ce1−xPbxO2−δ solid solutions

Nanocrystals of Ce_1?xPb_xO_2?δ (x = 0.00, 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, and 0.35) were prepared by a hydrothermal reaction route. During the formation reaction, buffer solutions were explored as an effective additive to retain the initial molar ratio. With increasing the Pb²⁺ content, the average crystallite size was slightly retarded. Morphologies observed by transmission electron microscope indicated that the particles were spherical-like and highly uniformed. Pb²⁺ ions are homogenously distributed in the solid solutions. Analyses using X-ray diffraction, Raman and UV spectroscopies showed that the solid solubility limit of Pb²⁺ in CeO₂ was about x = 0.20. For x < 0.20, with increasing the Pb²⁺ content, the bulk conductivity increased, and the oxygen storage capacity was enhanced as followed by a decrease in reduction temperature.     

A Novel Calorimetric Approach to the Redox Thermochemistry of Non-stoichiometric Oxides enthalpy of Oxidation of La1−yCayCrO3−δ

A novel calorimetric approach to the energetics of redox reactions in non-stoichiometric oxides is presented. The method utilizes a step-wise heated adiabatic calorimeter for determination of average enthalpies of oxidation. The measurement uncertainty is dominated by the uncertainty in the determination of the mass increment due to the oxidation. An experimental investigation of the re-oxidation energetics of reduced La_1–yCa_yCrO_3– is presented. The variation of the average formal oxidation state with temperature and oxygen fugacity is calculated from the experimentally determined enthalpy of oxidation and an estimated (lattice and configurational) entropy of oxidation. The calculated curves are in good agreement with experimental determinations reported in literature.This revised version was published online in November 2005 with corrections to the Cover Date.     

Mössbauer spectroscopic analysis of Bi1−xSrxFeO3−δ perovskites

Bi_1?xSr_xFeO_3?δ perovskites synthesised by solid-state reaction in ambient atmosphere or in a closed vessel were analysed by X-ray diffraction and Mössbauer spectroscopy. The evolution of the valence state of iron with both Bi/Sr ratio and oxygen content has been more particularly discussed. The samples are single phase and homogeneous for x ≤ 0.5 (Bi-rich) and x > 0.8 (Sr-rich). For intermediate Sr contents, the samples are less homogeneous and tend to contain both Bi-rich and Sr-rich phases. The appearance of Sr-rich phases for x > 0.5 corresponds to the appearance of Fe⁴⁺, to compensate for the lack of positive charges due to the replacement of Bi³⁺ by Sr²⁺.     

Metal-Free Intermolecular C−H Borylation of N-Heterocycles at B−B Multiple Bonds

Carbene-stabilized diborynes of the form LBBL (L=N-heterocyclic carbene (NHC) or cyclic alkyl(amino)carbene (CAAC)) induce rapid, high yielding, intermolecular ortho-C−H borylation at N-heterocycles at room temperature. A simple pyridyldiborene is formed when an NHC-stabilized diboryne is combined with pyridine, while a CAAC-stabilized diboryne leads to activation of two pyridine molecules to give a tricyclic alkylideneborane, which can be forced to undergo a further H-shift resulting in a zwitterionic, doubly benzo-fused 1,3,2,5-diazadiborinine by heating. Use of the extended N-heteroaromatic quinoline leads to a borylmethyleneborane under mild conditions via an unprecedented boron-carbon exchange process.     

The Influence of Weakly Coordinating Cations on the O−H⋅⋅⋅O− Hydrogen Bond of Silanol-Silanolate Anions

The reaction of a saline phosphazenium hydroxide hydrate with siloxanes led to a novel kind of silanol-silanolate anions. The weakly coordinating behavior of the cation renders the formation of silanol-silanolate hydrogen bonds possible, which otherwise suffer from detrimental silanolate–oxygen cation interactions. We investigated the influence of various weakly coordinating cations on silanol-silanolate motifs, particularly with regard to different cation sizes. While large cations favor the formation of intramolecular hydrogen bonds resulting in cyclic structures, the less bulky tetramethyl ammonium cation encourages the formation of polyanionic silanol-silanolate chains in the solid state.     

Relativistic calculations of AuSi+ and AuSi−

Theoretical calculations of the electronic structure of the ground state and a series of excited states of the AuSi⁺ and AuSi⁻ molecules are presented. The calculations were carried out with the spin-free relativistic infinite-order two-component (IOTC) method and high-level complete active space self-consistent field/complete active space perturbation theory correlated methods. The spin-orbit (SO) coupling was introduced via the restricted active space state interaction method with the use of the atomic mean-field SO integrals. The work presents the spectroscopic parameters of calculated states and full potential energy curves of the ionic AuSi⁺ and AuSi⁻ structures for the first time. Electrostatic potential maps projected on the electron density surface illustrate the significant relativistic effects on going from nonrelativistic to scalar relativistic treatments.     

Formal C−H Carboxylation of Unactivated Arenes

A formal C−H carboxylation of unactivated arenes using CO₂ in green solvents is described. The present strategy combines a sterically controlled Ir-catalyzed C−H borylation followed by a Cu-catalyzed carboxylation of the in situ generated organoboronates. The reaction is highly regioselective for the C−H carboxylation of 1,3-disubstituted and 1,2,3-trisubstituted benzenes, 1,2- or 1,4-symmetrically substituted benzenes, fluorinated benzenes and different heterocycles. The developed methodology was applied to the late-stage C−H carboxylation of commercial drugs and ligands.     

Sterically Controlled C−H Olefination of Heteroarenes

The regioselective functionalization of heteroarenes is a highly attractive synthetic target due to the prevalence of multiply substituted heteroarenes in nature and bioactive compounds. Some substitution patterns remain challenging: While highly efficient methods for the C2-selective olefination of 3-substituted five-membered heteroarenes have been reported, analogous methods to access the 5-olefinated products have remained limited by poor regioselectivities and/or the requirement to use an excess of the valuable heteroarene starting material. Herein we report a sterically controlled C−H olefination using heteroarenes as the limiting reagent. The method enables the highly C5-selective olefination of a wide range of heteroarenes and is shown to be useful in the context of late-stage functionalization.     

Electrophotocatalytic Decarboxylative C−H Functionalization of Heteroarenes

Decarboxylative C−H functionalization reactions are highly attractive methods for forging carbon–carbon bonds considering their inherent step- and atom-economical features and the pervasiveness of carboxylic acids and C−H bonds. An ideal approach to achieve these dehydrogenative transformations is through hydrogen evolution without using any chemical oxidants. However, effective couplings by decarboxylative carbon–carbon bond formation with proton reduction remain an unsolved challenge. Herein, we report an electrophotocatalytic approach that merges organic electrochemistry with photocatalysis to achieve the efficient direct decarboxylative C−H alkylation and carbamoylation of heteroaromatic compounds through hydrogen evolution. This electrophotocatalytic method, which combines the high efficiency and selectivity of photocatalysis in promoting decarboxylation with the superiority of electrochemistry in effecting proton reduction, enables the efficient coupling of a wide range of heteroaromatic bases with a variety of carboxylic acids and oxamic acids. Advantageously, this method is scalable to decagram amounts, and applicable to the late-stage functionalization of drug molecules.     

Metal-Free Stereoconvergent C−H Borylation of Enamides

Enamides, functional derivatives of enamines, play a significant role as synthetic targets. However, the stereoselective synthesis of these molecules has posed a longstanding challenge in organic chemistry, particularly for acyclic enamides that are less thermodynamically stable. In this study, we present a general strategy for constructing β-borylenamides by C−H borylation, which provides a versatile platform for generating the stereodefined enamides. Our approach involves the utilization of metalloid borenium cation, generated through the reaction of BBr₃ and enamides in the presence of two different additives, avoiding any exogenous catalyst. Importantly, the stereoconvergent nature of this methodology allows for the use of starting materials with mixed E/Z configurations, thus highlighting the unique advantage of this chemistry. Mechanistic investigations have shed light on the pivotal roles played by the two additives, the reactive boron species, and the phenomenon of stereoconvergence.     

Effect of EDTA on the diffusion behavior of 99TcO4 − and ReO4 − in GMZ bentonite

Polyaminopolycarboxylate EDTA with powerful metal-binding property, which often presents in low and intermediate-level waste, can enhance the radionuclide migration. The effect of EDTA on the diffusion behavior of ⁹⁹TcO₄ ^? and ReO₄ ^? in Gaomiaozi (GMZ) bentonite was investigated by using through-diffusion method. For ⁹⁹TcO₄ ^? in present of EDTA, the D _e values was (1.2 ± 0.1) × 10^?11 m²/s, which was 4 times higher than that in absent of EDTA. It can be explained that the complexation between ⁹⁹TcO₄ ^? and EDTA might be formed. By contrast, the D _e values of ReO₄ ^? remained unchanged in present or absent of EDTA, indicating that ReO₄ ^? could not complex with EDTA. However, the diffusion of ReO₄ ^? could be increased in present of EDTA, the D _a value was found to be increased from 1.8 × 10^?10 to 5.4 × 10^?10 m²/s. It demonstrated that ReO₄ ^? need more drastic conditions to form the Re(VII)–EDTA complexes than those used for ⁹⁹TcO₄ ^?. For both ReO₄ ^? and ⁹⁹TcO₄ ^?, the rock capacity factor α is less than the total porosity ε _tot, indicating that they has little retention/sorption on the surface of bentonite.