Highly Efficient Near‐Infrared Delayed Fluorescence Organic Light Emitting Diodes Using a Phenanthrene‐Based Charge‐Transfer Compound

Significant efforts have been made to develop high‐efficiency organic light‐emitting diodes (OLEDs) employing thermally activated delayed fluorescence (TADF) emitters with blue, green, yellow, and orange–red colors. However, efficient TADF materials with colors ranging from red, to deep‐red, to near‐infrared (NIR) have been rarely reported owing to the difficulty in molecular design. Herein, we report the first NIR TADF molecule TPA‐DCPP (TPA=triphenylamine; DCPP=2,3‐dicyanopyrazino phenanthrene) which has a small singlet–triplet splitting (ΔE_ST) of 0.13 eV. Its nondoped OLED device exhibits a maximum external quantum efficiency (EQE) of 2.1 % with a Commission International de L′Éclairage (CIE) coordinate of (0.70, 0.29). Moreover, an extremely high EQE of nearly 10 % with an emission band at λ=668 nm has been achieved in the doped device, which is comparable to the most‐efficient deep‐red/NIR phosphorescent OLEDs with similar electroluminescent spectra.     

Red/Near‐Infrared Thermally Activated Delayed Fluorescence OLEDs with Near 100 % Internal Quantum Efficiency

Developing red thermally activated delayed fluorescence (TADF) emitters, attainable for both high‐efficient red organic light‐emitting diodes (OLEDs) and non‐doped deep red/near‐infrared (NIR) OLEDs, is challenging. Now, two red emitters, BPPZ‐PXZ and mDPBPZ‐PXZ, with twisted donor–acceptor structures were designed and synthesized to study molecular design strategies of high‐efficiency red TADF emitters. BPPZ‐PXZ employs the strictest molecular restrictions to suppress energy loss and realizes red emission with a photoluminescence quantum yield (Φ_PL) of 100±0.8 % and external quantum efficiency (EQE) of 25.2 % in a doped OLED. Its non‐doped OLED has an EQE of 2.5 % owing to unavoidable intermolecular π–π interactions. mDPBPZ‐PXZ releases two pyridine substituents from its fused acceptor moiety. Although mDPBPZ‐PXZ realizes a lower EQE of 21.7 % in the doped OLED, its non‐doped device shows a superior EQE of 5.2 % with a deep red/NIR emission at peak of 680 nm.     

High‐Performance Blue OLEDs Based on Phenanthroimidazole Emitters via Substitutions at the C6‐ and C9‐Positions for Improving Exciton Utilization

Donor–acceptor (D–A) molecular architecture has been shown to be an effective strategy for obtaining high‐performance electroluminescent materials. In this work, two D–A molecules, Ph‐BPA‐BPI and Py‐BPA‐BPI, have been synthesized by attaching highly fluorescent phenanthrene or pyrene groups to the C6‐ and C9‐positions of a locally excited‐state emitting phenylamine–phenanthroimidazole moiety. Equipped with good physical and hybridized local and charge‐transfer properties, both molecules show high performances as blue emitters in nondoped organic light‐emitting devices (OLEDs). An OLED using Ph‐BPA‐BPI as the emitting layer exhibits deep‐blue emission with CIE coordinates of (0.15, 0.08), and a maximum external quantum efficiency (EQE), current efficiency (CE), and power efficiency (PE) of 4.56 %, 3.60 cd A^?1, and 3.66 lm W^?1, respectively. On the other hand, a Py‐BPA‐BPI‐based, sky‐blue OLED delivers the best results among nondoped OLEDs with CIE_y values of < 0.3 reported so far, for which a very low turn‐on voltage of 2.15 V, CIE coordinates of (0.17, 0.29), and maximum CE, PE, and EQE values of 10.9 cd A^?1, 10.5 lm W^?1, and 5.64 %, were achieved, respectively. More importantly, both devices show little or even no efficiency roll‐off and high singlet exciton‐utilizing efficiencies of 36.2 % for Ph‐BPA‐BPI and 39.2 % for Py‐BPA‐BPI.     

Unique Solid‐State Emission Behavior of Aromatic Difluoroboronated β‐Diketones as an Emitter in Organic Light‐Emitting Devices

Aromatic difluoroboronated β‐diketone ( BF₂DK ) derivatives are a widely known class of luminescent organic materials that exhibit high photoluminescent quantum efficiency and unique aggregation‐dependent fluorescence behavior. However, there have been only a few reports on their use in solid‐state electronic devices, such as organic light‐emitting devices (OLEDs). Herein, we investigated the solid‐state properties and OLED performance of a series of π‐extended BF₂DK derivatives that have previously been shown to exhibit intense fluorescence in the solution state. The BF₂DK derivatives formed exciplexes with a carbazole derivative and exhibited thermally activated delayed fluorescence (TADF) behavior to give orange electroluminescence with a peak external quantum efficiency of 10 % that apparently exceeds the theoretical efficiency limit of conventional fluorescent OLEDs (7.5 %), assuming a light out‐coupling factor of 30 %.     

Organic Light‐Emitting Diodes Using a Neutral π Radical as Emitter: The Emission from a Doublet

Triplet harvesting is a main challenge in organic light‐emitting devices (OLEDs), because the radiative decay of the triplet is spin‐forbidden. Here, we propose a new kind of OLED, in which an organic open‐shell molecule, (4‐N‐carbazolyl‐2,6‐dichlorophenyl)bis(2,4,6‐trichlorophenyl)methyl (TTM‐1Cz) radical, is used as an emitter, to circumvent the transition problem of triplet. For TTM‐1Cz, there is only one unpaired electron in the highest singly occupied molecular orbital (SOMO). When this electron is excited to the lowest singly unoccupied molecular orbital (SUMO), the SOMO is empty. Thus, transition back of the excited electron to the SOMO is totally spin‐allowed. Spectral analysis showed that electroluminescence of the OLED originated from the electron transition between SUMO and SOMO. The magneto‐electroluminescence measurements revealed that the spin configuration of the excited state of TTM‐1Cz is a doublet. Our results pave a new way to obtain 100 % internal quantum efficiency of OLEDs.     

Twisted penta‐Carbazole/Benzophenone Hybrid Compound as Multifunctional Organic Host,Dopant or Non‐doped Emitter for Highly Efficient Solution‐Processed Delayed Fluorescence OLEDs

A new multi‐functional penta‐carbazole/benzophenone hybrid compound 5CzBP was designed and synthesized through a simple one‐step catalyst‐free C—N coupling reaction by using 2,3,4,5,6‐pentafluorobenzophenone and carbazole as starting materials. 5CzBP is very soluble in tetrahydrofuran (THF), which brings an environmentally friendly device fabrication for solution‐processed OLEDs instead of most widely used chlorinated solvents when 5CzBP is employed as the bulk‐phase of organic host or non‐doped emitter in the emissive layer. 5CzBP exhibits thermally activated delayed fluorescence (TADF) characteristic with relatively high triplet energy of 2.60 eV and a low ΔE_ST of 0.01 eV. By using the new TADF material as organic host for another green TADF emitter, maximum external quantum efficiency (EQE) of 12.5% has been achieved in simple solution‐processed OLED device. Besides, a maximum EQE of 8.9% and 5.7% was further obtained in TADF devices based on 5CzBP as dopant and non‐doped emitter, respectively. The simultaneously acting as efficient TADF host and non‐doped TADF emitter provides the potential guidance of the future simple single‐layer two‐color white OLEDs based on low‐cost pure organic TADF materials.     

Tri‐Spiral Donor for High Efficiency and Versatile Blue Thermally Activated Delayed Fluorescence Materials

Blue thermally activated delayed fluorescence (TADF) emitters that can simultaneously achieve high efficiency in doped and nondoped organic light‐emitting diodes (OLEDs) are rarely reported. Reported here is a strategy using a tri‐spiral donor for such versatile blue TADF emitters. Impressively, by simply extending the nonconjugated fragment and molecular length, aggregation‐caused emission quenching (ACQ) can be greatly alleviated to achieve as high as a 90 % horizontal orientation dipole ratio and external quantum efficiencies (EQEs) of up to 33.3 % in doped and 20.0 % in nondoped sky‐blue TADF‐OLEDs. More fascinatingly, a high‐efficiency purely organic white OLED with an outstanding EQE of up to 22.8 % was also achieved by employing TspiroS‐TRZ as a blue emitter and an assistant host. This compound is the first blue TADF emitter that can simultaneously achieve high electroluminescence (EL) efficiency in doped, nondoped sky‐blue, and white TADF‐OLEDs.     

Combining Charge‐Transfer Pathways to Achieve Unique Thermally Activated Delayed Fluorescence Emitters for High‐Performance Solution‐Processed,Non‐doped Blue OLEDs

Two efficient blue thermally activated delayed fluorescence compounds, B‐oCz and B‐oTC , composed of ortho‐donor (D)–acceptor (A) arrangement were designed and synthesized. The significant intramolecular D–A interactions induce a combined charge transfer pathway and thus achieve small ΔE _ST and high efficiencies. The concentration quenching can be effectively inhibited in films of these compounds. The blue non‐doped organic light emitting diodes (OLEDs) based on B‐oTC prepared from solution processes shows record‐high external quantum efficiency (EQE) of 19.1 %.     

Combining Charge‐Transfer Pathways to Achieve Unique Thermally Activated Delayed Fluorescence Emitters for High‐Performance Solution‐Processed,Non‐doped Blue OLEDs

Two efficient blue thermally activated delayed fluorescence compounds, B‐oCz and B‐oTC , composed of ortho‐donor (D)–acceptor (A) arrangement were designed and synthesized. The significant intramolecular D–A interactions induce a combined charge transfer pathway and thus achieve small ΔE _ST and high efficiencies. The concentration quenching can be effectively inhibited in films of these compounds. The blue non‐doped organic light emitting diodes (OLEDs) based on B‐oTC prepared from solution processes shows record‐high external quantum efficiency (EQE) of 19.1 %.     

Efficient Electroluminescence from Excimers of 1,3,6,8‐Tetrakis(3,5‐dimethylphenyl)pyrene

Excimers are generally considered as detrimental to OLEDs. For pyrene‐based chromophores, however, this is not always true. In this contribution, two new methylated tetraphenylpyrenes, 1,3,6,8‐tetra‐o‐tolylpyrene (TTPy) and 1,3,6,8‐tetrakis(3,5‐dimethylphenyl)pyrene (TDMPPy), were synthesized through Suzuki coupling reactions. TDMPPy absorbs and emits light at longer wavelengths than TTPy due to its more planar conformation and thus better conjugation. TDMPPy is prone to excimer formation, thus leading to a strong bathochromic shift (84 nm) in the photoluminescence spectrum of its film. TDMPPy exhibits efficient electroluminescence originating from pyrene excimers, affording a maximum luminance of 26 670 cd m^?2 and a current efficiency as high as 10.8 cd A^?1 in a non‐doped OLED (ITO/PEDOT:PSS (50 nm)/NPB (30 nm)/TDMPPy (30 nm)/TPBI (40 nm)/Ca:Ag).     

Modular Establishment of a Diketopyrrolopyrrole‐Based Polymer Library via Pd‐Catalyzed Direct C–H (Hetero)arylation: a Highly Efficient Approach to Discover Low‐Bandgap Polymers

A concise, highly efficient palladium‐catalyzed direct C–H (hetero)arylation is developed to modularly assemble a diketopyrrolopyrrole ( DTDPP )‐based polymer library to screen low‐bandgap and near‐infrared (NIR) absorbing materials. The DTDPP ‐based copolymers P1 and P2 with an alternating donor–acceptor–donor–acceptor (D–A–D–A) sequence and the homopolymer P9 exhibit planarity and excellent π‐conjugation, which lead to low bandgaps (down to 1.22 eV) as well as strong and broad NIR absorption bands (up to 1000 nm).     

Solution‐Processed,Undoped, Deep‐Blue Organic Light‐Emitting Diodes Based on Starburst Oligofluorenes with a Planar Triphenylamine Core

A series of starburst oligomers (T1–T3) that contained a fully diarylmethene‐bridged triphenylamine core and oligofluorene arms were designed and synthesized through Suzuki cross‐coupling reactions. Their thermal, photophysical, and electrochemical properties were also investigated. These materials showed high glass transition, in the range of 123–129 °C, and good film‐forming abilities. They displayed deep‐blue emission both in solution and as thin films. Solution‐processed devices based on these oligomers exhibited highly efficient deep‐blue electroluminescence and the device performances were significantly enhanced with the extension of the oligofluorene arms. The double‐layered device that contained T3 as an emitter showed a maximum current efficiency of 3.83 cd A^?1 and a maximum external quantum efficiency of 4.19 % with CIE coordinates of (0.16, 0.09), which are among the highest values for undoped deep‐blue OLEDs that are based on solution‐processable starburst oligomers.     

Tailoring Excited State Properties and Energy Levels Arrangement via Subtle Structural Design on D‐π‐A Materials

The donor‐π‐conjugated‐acceptor (D‐π‐A) structure is an important design for the luminescent materials because of its diversity in the selections of donor, π‐bridge and acceptor groups. Herein, we demonstrate two examples of D‐π‐A structures capable to finely modulate the excited state properties and arrangement of energy levels, TPA‐AN‐BP and CZP‐AN‐BP , which possess the same acceptor and π‐bridge but different donor. The investigation of their photophysical properties and DFT calculation revealed that the D‐π‐A structure with proper donor, π‐bridge and acceptor can result in separation of frontier molecular orbitals on the corresponding donor and acceptor with an obvious overlap on the π‐bridge, resulting in a hybridized local and charge‐transfer (HLCT ) excited state with high photoluminescent (PL ) efficiencies. Meanwhile, their singlet and triplet states are arranged on corresponding moieties with large energy gap between T₂ and T₁ , and a small energy gap between S₁ and T₂ , which favor the reverse intersystem crossing (RISC ) from high‐lying triplet levels to singlet levels. As a result, the sky‐blue emission non‐doped OLED based on the TPA‐AN‐BP reached maximum external quantum efficiency (EQE ) of 4.39% and a high exciton utilization efficiency (EUE ) of 77%. This study demonstrates a new strategy to construct highly efficient OLED materials.     

Phosphorescent Cyclometalated Iridium(III) Complexes That Contain Substituted 2‐Acetylbenzo[b]thiophen‐3‐olate Ligand for Red Organic Light‐Emitting Devices

We report the synthesis of a new class of thermally stable and strongly luminescent cyclometalated iridium(III) complexes 1 – 6 , which contain the 2‐acetylbenzo[b]thiophene‐3‐olate (bt) ligand, and their application in organic light‐emitting diodes (OLEDs). These heteroleptic iridium(III) complexes with bt as the ancillary ligand have a decomposition temperature that is 10–20 % higher and lower emission self‐quenching constants than those of their corresponding complexes with acetylacetonate (acac). The luminescent color of these iridium(III) complexes could be fine‐tuned from orange (e.g., 2‐phenyl‐6‐(trifluoromethyl)benzo[d]thiazole (cf₃bta) for 4 ) to pure red (e.g., lpt (Hlpt=4‐methyl‐2‐(thiophen‐2‐yl)quinolone) for 6 ) by varying the cyclometalating ligands (C‐deprotonated C^N). In particular, highly efficient OLEDs based on 6 as dopant (emitter) and 1,3‐bis(carbazol‐9‐yl)benzene (mCP) as host that exhibit stable red emission over a wide range of brightness with CIE chromaticity coordinates of (0.67, 0.33) well matched to the National Television System Committee (NTSC) standard have been fabricated along with an external quantum efficiency (EQE) and current efficiency of 9 % and 10 cd A^?1, respectively. A further 50 % increase in EQE (>13 %) by replacing mCP with bis[4‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)phenyl]diphenylsilane (BIQS) as host for 6 in the red OLED is demonstrated. The performance of OLEDs fabricated with 6 (i.e., [(lpt)₂Ir(bt)]) was comparable to that of the analogous iridium(III) complex that bore acac (i.e., [(lpt)₂Ir(acac)]; 6 a in this work) [Adv. Mater.­ 2011 , 23, 2981] fabricated under similar conditions. By using ntt (Hnnt=3‐hydroxynaphtho[2,3‐b]thiophen‐2‐yl)(thiophen‐2‐yl)methanone) ligand, a substituted derivative of bt, the [(cf₃bta)₂Ir(ntt)] was prepared and found to display deep red emission at around 700 nm with a quantum yield of 12 % in mCP thin film.     

Meta Junction Promoting Efficient Thermally Activated Delayed Fluorescence in Donor‐Acceptor Conjugated Polymers

The meta junction is proposed to realize efficient thermally activated delayed fluorescence (TADF) in donor–acceptor (D‐A) conjugated polymers. Based on triphenylamine as D and dicyanobenzene as A, as a proof of concept, a series of D‐A conjugated polymers has been developed by changing their connection sites. When the junction between D and A is tuned from para to meta, the singlet–triplet energy splitting (ΔE_ST) is found to be significantly decreased from 0.44 to 0.10 eV because of the increasing hole–electron separation. Unlike the para‐linked analogue with no TADF, consequently, the meta‐linked polymer shows a strong delayed fluorescence. Its corresponding solution‐processed organic light‐emitting diodes (OLEDs) achieve a promising external quantum efficiency (EQE) of 15.4 % (51.9 cd A^?1, 50.9 lm W^?1) and CIE coordinates of (0.34, 0.57). The results highlight the bright future of D‐A conjugated polymers used for TADF OLEDs.     

Achieving Pure Deep‐Blue Electroluminescence with CIE y≤0.06 via a Rational Design Approach for Highly Efficient Non‐Doped Solution‐Processed Organic Light‐Emitting Diodes

Deep‐blue fluorescent emitters with Commission Internationale de l'Eclairage (CIE) y≤0.06 are urgently needed for high‐density storage, full‐color displays and solid‐state lighting. However, developing such emitters with high color purity and efficiency in solution‐processable non‐doped organic light‐emitting diodes (OLEDs) remains an important challenge. Here, we present the synthesis of two new deep‐blue fluorescent emitters ( AFpTPI and AFmTPI ) based on 10‐(9,9‐diethyl‐9H‐fluoren‐2‐yl)‐9,9‐dimethyl‐9,10‐dihydroacridine as a core and 1,3‐ and/or 1,4‐phenylene‐linked triphenylimidazole (TPI) analogues for non‐doped solution‐processable OLEDs. Their thermal, photophysical, electrochemical, and device characteristics are explored, and also strongly supported by density functional theory (DFT) study. AFpTPI and AFmTPI exhibit excellent thermal stability (≈450 °C) with high glass transition temperatures (T_g; 141–152 °C) and deep‐blue emission with high quantum yields. Specifically, the solution‐processed non‐doped device with AFpTPI as an emitter exhibits a maximum external quantum efficiency (EQE) of 4.56 % with CIE coordinates of (0.15, 0.06), which exactly matches the European Broadcasting Union (EBU) blue standard. In addition, AFmTPI also displays good efficiency and better color purity (EQE: 3.37 %; CIE (0.15, 0.05)). To the best of our knowledge, the present work is the first report on non‐doped solution‐processable OLEDs with efficiency close to 5 % and CIE y≤0.06.     

Dibenzo[a,j]phenazine‐Cored Donor–Acceptor–Donor Compounds as Green‐to‐Red/NIR Thermally Activated Delayed Fluorescence Organic Light Emitters

A new family of thermally activated delayed fluorescence (TADF) emitters based on U‐shaped D‐A‐D architecture with a novel accepting unit has been developed. All investigated compounds have small singlet‐triplet energy splitting (ΔE_ST) ranging from 0.02 to 0.20 eV and showed efficient TADF properties. The lowest triplet state of the acceptor unit plays the key role in the TADF mechanism. OLEDs fabricated with these TADF emitters achieved excellent efficiencies up to 16 % external quantum efficiency (EQE).     

Light‐Harvesting Ytterbium(III)–Porphyrinate–BODIPY Conjugates: Synthesis,Excitation‐Energy Transfer,and Two‐Photon‐Induced Near‐Infrared‐Emission Studies

Based on a donor–acceptor framework, several conjugates have been designed and prepared in which an electron‐donor moiety, ytterbium(III) porphyrinate (YbPor), was linked through an ethynyl bridge to an electron‐acceptor moiety, boron dipyrromethene (BODIPY). Photoluminescence studies demonstrated efficient energy transfer from the BODIPY moiety to the YbPor counterpart. When conjugated with the YbPor moiety, the BODIPY moiety served as an antenna to harvest the lower‐energy visible light, subsequently transferring its energy to the YbPor counterpart, and, consequently, sensitizing the Yb^III emission in the near‐infrared (NIR) region with a quantum efficiency of up to 0.73 % and a lifetime of around 40 μs. Moreover, these conjugates exhibited large two‐photon‐absorption cross‐sections that ranged from 1048–2226 GM and strong two‐photon‐induced NIR emission.     

A Simple and Strong Electron‐Deficient 5,6‐Dicyano[2,1,3]benzothiadiazole‐Cored Donor‐Acceptor‐Donor Compound for Efficient Near Infrared Thermally Activated Delayed Fluorescence

Despite the success of thermally activated delayed fluorescent (TADF) materials in steering the next generation of organic light‐emitting diodes (OLEDs), effective near infrared (NIR) TADF emitters are still very rare. Here, we present a simple and extremely high electron‐deficient compound, 5,6‐dicyano[2,1,3]benzothiadiazole (CNBz), as a strong electron‐accepting unit to develop a sufficiently strong donor‐acceptor (D?A) interaction for NIR emission. End‐capping with the electron‐donating triphenylamine (TPA) unit created an effective D?A?D type system, giving rise to an efficient NIR TADF emissive molecule (λ_em=750 nm) with a very small ΔE_ST of 0.06 eV. The electroluminescent device using this NIR TADF emitter exhibited an excellent performance with a high maximum radiance of 10020 mW Sr^?1 m^?2, a maximum EQE of 6.57% and a peak wavelength of 712 nm.     

Molecular Orientation Effects in Organic Light‐Emitting Diodes

It is well known that by horizontally aligning the transition dipole moments of exciton dipoles in the emitter films of organic light‐emitting diodes (OLEDs), a larger fraction of the radiative power can escape from the OLED stack, increasing the light outcoupling efficiency by up to 50 % compared to the isotropic counterparts. In this account, we review recent advances in understanding this phenomenon, with a special focus on the practical strategies to control the molecular orientation in vacuum‐deposited films of thermally activated delayed fluorescent (TADF) dyes. The role of molecular orientation in efficient OLED design is discussed, which has been experimentally proven to increase the external quantum efficiency exceeding 30 %. We outline the future challenges and perspectives in this field, including the potential to extend the concept to the solution‐processed films. Finally, the development of multiscale computer simulations is reviewed to assess their potential as a complementary approach to systematically screening OLED molecules in silico.