共查询到20条相似文献,搜索用时 91 毫秒
1.
2.
软模板合成有序介孔碳材料 总被引:1,自引:0,他引:1
有序介孔碳材料由于其较大的表面积、均一的孔径、良好的热稳定性和化学稳定性,广泛应用于吸附、分离、催化以及能量储存等众多领域。与传统的以硅基介孔材料为硬模板的反向复制方法相比,通过嵌段共聚物和聚合物前驱体之间的有机-有机自组装的软模板法简便易行,已成为合成有序介孔碳材料有效方法。本论文综述了介孔碳材料的软模板合成机制、合成方法、功能化及其应用,对合成技术、结构控制、孔径调控以及形貌控制等方面进行了讨论,并探讨了其在吸附、催化、电极材料等领域的应用。 相似文献
3.
4.
中空介孔材料,尤其是硅基和碳基中空介孔材料,由于其孔道结构丰富、孔径可调、高比表面积、可容纳客体分子、良好的热稳定性和化学稳定性等特点已被广泛应用于催化、能量储存等众多领域。模板法是目前为止制备中空介孔结构最有效的方法之一,其最大特点是可以通过对模板的调控来实现对中空介孔结构的控制。聚合物基模板种类繁多,主要包括嵌段共聚物、聚合物乳胶粒、天然/合成生物大分子及复杂结构高分子等;与传统的表面活性剂/无机氧化物模板相比,其自组装形态更加丰富,结构更易进行功能化修饰。同时,以聚合物为模板的合成反应条件更加温和可控,更有利于合成形态各异、功能丰富的中空介孔材料。本文综述了近年来不同聚合物基模板合成中空介孔材料的研究进展,并着重介绍了贵金属粒子负载的中空介孔材料在催化载体领域的应用;同时,指出了当前阻碍中空介孔材料发展的问题,并对其在催化领域的应用前景进行了展望。 相似文献
5.
介孔材料是一种具有较大比表面积和高度有序孔道结构的材料,而功能化介孔材料是将介孔材料改性而使其具有不同的功能。这种材料由于具有极好的吸附和催化性能而被广泛应用于环境领域中。本文总结了功能化介孔材料的制备方法,包括引入官能团、掺杂金属和酸改性;探讨分析了几种制备方法下的功能化介孔材料的特点和应用前景;重点介绍了功能化介孔材料在吸附重金属、有机污染物、染料、CO2以及催化领域的研究进展;最后展望了未来功能化介孔材料的应用前景和发展趋势,以期为功能化介孔材料的发展提供参考和指明方向。 相似文献
6.
7.
有序介孔碳基金属复合材料具有较大的比表面积、规整的孔道结构、良好的热稳定性及化学稳定性、活性金属组分分散度高以及粒径尺寸小等特点,广泛应用于非均相催化领域。常用的合成方法包括浸渍法、“一锅”法以及金属组分转移法等。本文综述了近年来有序介孔碳基金属复合材料的制备及其在非均相催化领域中的应用研究进展,重点阐述了介孔碳载体的介观结构调控、表面性质控制及限域效应等对所负载的活性金属组分的分散性、粒径大小,以及对反应物和产物扩散的影响,探讨了其在气相反应、液相反应和光电催化等领域的应用,并对有序介孔碳基复合材料的发展方向和应用前景进行了展望。 相似文献
8.
9.
10.
多孔炭材料具有高的比表面积、发达的孔结构、耐热、耐腐蚀、无毒无害、价廉、易操作等特点,以其为研究核心,在学术界和工业界均具有广阔的应用前景。通过胶晶模板法合成孔径在亚微米范围内的三维有序大孔炭,其高度规整的孔道结构,在吸附分离、催化和电极等领域已展现出巨大的应用潜能。利用双模板法将介孔结构融汇于三维有序大孔炭的孔壁中,设计构筑出三维有序大孔-介孔炭,势必会显著增强其应用价值。本文主要阐述了以胶晶为主体模板制备三维有序大孔炭的各种路径;采用双模板法将介孔引入大孔通道内获取三维有序大孔-介孔炭;探索影响孔结构参数的主要因素,并与各种功能材料复合增强其性能;着重对三维有序大孔炭及大孔-介孔炭在环境净化和新型能源转化与储备领域的应用进行概述。 相似文献
11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%. 相似文献
12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields. 相似文献
13.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL. 相似文献
14.
A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions. 相似文献
15.
Uroš Grošelj Mojca Žorž Amalija Golobič Branko Stanovnik Jurij Svete 《Tetrahedron》2013,69(52):11092-11108
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives. 相似文献
16.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion. 相似文献
17.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula. 相似文献
18.
Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular SN2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively. 相似文献
19.
Rebecca J. Burton Mandy L. CrowtherNeal J. Fazakerley Shaun M. FilleryBarry M. Hayter Jason G. KettleCaroline A. McMillan Paula PerkinsPeter Robins Peter M. SmithEmma J. Williams Gail L. Wrigley 《Tetrahedron letters》2013
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines. 相似文献
20.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%). 相似文献