微分电位溶出法连续测定饮料中的铜铅镉锌

建立了微分电位溶出法连续测定饮料中痕量铜、铅、镉、锌的新方法。在HAc- Na Ac( p H4 .5)～ 3.5× 1 0 -2 mol·L-1KCl～ 2 .6× 1 0 -5 mol· L-1Hg2 +介质中测定锌 ,然后调节底液为 0 .0 1 mol·L-1HCl,连续测定铜、铅、镉。铜、铅、镉、锌 ,检出限分别为 4 ,0 .1 ,2 ,4 μg· L-1,线性测定范围 Zn2 +:0～ 30 0 μg·L-1,Cu2 +、Pb2 +、Cd2 +:0～ 2 2 0μg· L-1,回收率为 83.4 %～ 1 0 3.3% ,RSD<3.4 % ( n=7)。该法较好解决了金属互化物的影响 ,样品不需消化便可直接测定。     

双波长吸光光度法同时测定饮用水中钙和镁

研究了以偶氮胂Ⅲ作显色剂 ,用双波长吸光光度法同时测定水中钙和镁的最佳条件。测定钙和镁的最佳波长对分别为 6 5 0～ 5 93nm和 6 15～ 6 6 5 .5nm ,服从比耳定律的线性范围分别为0～ 12 μg/ 2 5ml和 0～ 18μg/ 2 5ml,检出限分别为 0 .0 1和 0 .0 18μg·ml- 1,加标回收率分别在 97 2 %～ 10 4 .5 %和 89.8%～ 92 .8%之间。将此法应用于饮用水中钙和镁的测定 ,结果满意。     

荧光光度法直接测定环境水中对氯苯胺

研究了用荧光光度法直接测定环境水中对氯苯胺的含量 ,此法不需萃取和显色。测定条件为 :pH =6.5 ,λex λem =2 88 35 4nm ,检出限为 4 .2 μg·L-1,线性范围 0～ 1.0mg·L ,此法可直接用于环境水中对氯苯胺含量的测定 ,回收率达 99%～ 10 1% ,结果满意     

动力学光度法测定痕量锌的研究

在微酸性介质中 ,痕量锌对过氧化氢氧化络黑T褪色反应有催化作用 ,提出了催化动力学光度法测定痕量锌的新方法 ,研究了该方法的适宜反应条件及动力学性质。方法的检出限为 6.9μg·L-1,测量线性范围为 2～ 64μg·L-1,用于人发及食品中锌的测定 ,获得了满意的结果     

氢化物发生HG-ICP-AES测定动物源性水产品中的无机砷含量

建立了氢化物发生电感耦合等离子发射光谱(HG-ICP-AES)测定动物源性水产品中无机砷含量的方法,并对ICP-AES工作参数及氢化物发生条件进行了优化和选择.方法的检出限为0.92 μg·L-1,线性范围为0～100 μg·L-1,相对标准偏差为1.24%;回收率范围为98.5%～101.6%.本法适用于低含量无机砷含量的日常检测测定.     

痕量钒的阻抑动力学光度法测定

基于稀硫酸介质中痕量钒 (Ⅴ )对溴酸钾氧化 2 (5 溴 2 吡啶偶氮 ) 5 二乙氨基酚褪色反应的阻抑作用 ,建立了测定痕量钒 (Ⅴ )的动力学光度法。方法检出限为 0 .0 4 3μg·L- 1,线性范围为 0～ 4 .0 μg·L- 1。用于测定人发及茶叶样品中的痕量钒 (Ⅴ ) ,结果满意。     

一阶导数吸光光度法测定碘酸钾碘盐中碘

采用一阶导数吸光光度法测定碘酸钾碘盐中碘 ,线性范围为 0～ 12 μg·ml-1,检出限为1.6μg·ml-1,对盐样进行重复测定 ,相对标准偏差≤ 1.9% ,对样品进行加标回收试验 ,回收率在 97.0 %～ 10 2 .5 % ,结果良好     

氢化物发生-原子吸收光谱法测定蔬菜中痕量铅

采用微波消化、氢化物发生-原子吸收光谱法测定蔬菜中痕量铅。研究了硼氢化钾用量、酸介质及其酸度对铅的测定影响,采用铁氰化钾-草酸体系可消除金属元素对铅测定的干扰。检出限为0．023μg·L-1,回收率为97．8％～105．6％,RSD为0．8％～1．8％,线性范围为0～40μg·L-1。     

免疫亲和柱高效液相色谱法快速测定牛奶和奶粉中黄曲霉毒素M1、B1、B2、G1、G2

采用单克隆抗体免疫亲和技术作为直接从样品中分离提取黄曲霉毒素的特效手段,提取液挥干后,经衍生用HPLC荧光检测器测定.对鲜奶和高脂奶粉(脂肪含量25%)在0.01,0.05,0.1和0.1,0.5,1.0 μg·L-1水平对黄曲霉毒素M1、B1、B2、G1、G2测定平均回收率(n=10)为66.0%～97.0%;相对标准偏差(n=10)为1.04%～14.0%.方法的检出限低于0.01 μg·L-1(鲜奶), 0.1 g·kg-1(奶粉).     

氢化物发生-原子荧光光谱法测定城市脐橙树叶中铅

研究氢化物发生-原子荧光光谱法测定城市脐橙树叶中铅的适宜条件,并对脐橙树叶中铅量进行了测定.研究表明:叶中的含铅量与车流量呈正相关.方法的线性范围为0.00～1.50 mg·L-1,相关系数为0.997 8,检出限为0.19μg·L-1,回收率在93.2%～105.0%之间.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.