速吸油型高吸油性树脂的研究

以丙烯酸－２乙基己酯与甲基丙烯酸异丁酯为单体，采用加入一种惰性溶剂的悬浮聚合法合成了多孔性高吸油性树脂。在单体中基丙烯酸异丁酯含量为２７％以及引发剂为１％和交联剂为０．５％的条件，制得的树脂吸油速度在１小时内达最大值；可以吸其自身重量１０倍的煤油、１８．２倍的苯。     

氟硅协同改性丙烯酸树脂的合成与防污性能研究

以甲基丙烯酸十二氟庚酯(FMA)、甲基丙烯酸聚二甲基硅氧烷基酯(SMA)、甲基丙烯酸甲酯、丙烯酸正丁酯、甲基丙烯酸正丁酯和丙烯酸乙酯为共聚单体,通过溶液聚合反应合成出侧链含有机氟、有机硅的丙烯酸树脂.通过核磁共振氢谱(1H-NMR)、核磁共振氟谱(19F-NMR)、红外光谱(FTIR)对聚合物的结构进行了表征.通过扫描电镜(SEM)、接触角测试和生物评价等方法,探讨了FMA、SMA含量对树脂涂膜性能的影响.结果表明氟硅改性的丙烯酸树脂比单独含氟或含硅改性的丙烯酸树脂具有更低的表面能,而且氟硅改性的丙烯酸树脂涂膜比商业化的聚硅氧烷涂膜具有更好的防污性能.     

一种低分子量带有羧基的聚丙烯酸酯丙烯酸树脂的制备和性质

制备了一种紫外光固化预聚物——带有羧基的低分子量聚丙烯酸酯丙烯酸树脂(Polyacrylate acrylic resin, PAAR).其主链由丙烯酸烷基酯和丙烯酸进行共聚而得,当采用丙烯酸甲酯、丙烯酸乙酯和丙烯酸(摩尔比1:1:1)作为共聚单体,引发剂AIBN为1.5%,链转移剂十二硫醇为2.5%时,聚合得到的聚丙烯酸酯(Polyacrylate, PA)分子量在1100-1400之间,多分散性小于2,反应速率快,转化率高;由这种PA和甲基丙烯酸缩水甘油酯(GMA)进行酯化反应,制备得到最终产物聚丙烯酸酯丙烯酸树脂,酯化率可以达到80%以上,其光固化膜具有较好的涂膜硬度和柔韧性,光泽度饱满.     

单一化学交联与物理化学复合交联高吸油树脂的比较

提出在单一化学交联吸油树脂中引入物理交联的设想，并采用悬浮聚合法了单一化学交联和物理－化学复合交联的聚丙烯酸酯系高吸油树脂，对两种不同树脂的吸油速率，低亲油性单体树脂的吸油性能，最佳单体配比以及化学交联剂含量的影响进行了比较，结果表明物理交联的引入加快了树脂的吸油速率，提高低亲油性单体树脂的吸油能力，并且还使最佳单体配比中低亲油性单体含量增加，同时表明部分物理交联吸油树脂有一最佳化学交联剂含量区。     

以两性高分子作反相悬浮稳定剂合成吸水剂

以聚（甲基丙烯酸十二酯－丙烯酸）两性共聚物为稳定剂，用反相悬浮聚合法合成了丙烯酸／丙烯酰胺／甲基丙烯酸羟乙酯三元共聚型超强吸水剂：吸蒸馏水1150mL.g^-1，吸0．9％NaCl溶液91mL.g^-1，研究了稳定剂结构及用量，单体组成，交联剂，链转移剂，中和程度等聚合条件及吸水剂性能的影响，实验表明甲基丙烯酸十二酯－丙烯酸共聚物是一种很好的反相悬浮稳定剂。     

AA/AMPS共聚型吸水树脂反相悬浮合成工艺研究

以过硫酸铵－亚酸钠为引发剂，用反相悬浮法合成丙烯酸／2－丙烯酰胺基－2－甲基丙烷磺酸共聚型吸水树脂，最佳工艺条件为：N，N－亚基双丙烯酰胺浓度＝1．082mmol.L^-1，丙烯酸中和度为80％，2－丙烯酰胺基－2－甲基丙烷磺酸的质量分数w=0.30,OP4-PEG的质量分数w=0.003，双组分引发剂浓度＝22．64mmol.L^-1，反应温度50摄氏度，共聚物吸液率（水及生理盐水）A为：AH2O=1070mL.g^-1,Anormal aaline=220mL.g^-1，抗电解质能力高于聚丙烯酸钠或丙烯酸钠与丙烯酰胺的共聚物（反相悬浮法合成），140℃以上热稳定性低于聚丙烯酸钠，保水性与其相当。     

电荷转移聚合法合成聚丙烯酸叔丁酯的研究

本文以丙烯酸叔丁酯为单体,苯胺与二苯甲酮络合物为引发剂,四氢呋喃为溶剂,在紫外光照射下通过电荷转移聚合(CTP)合成了具有苯亚胺基链端的聚丙烯酸叔丁酯(PtBA),并用FT-IR、1H-NMR和GPC等对其进行了表征.同时考察了反应时间、引发剂浓度、反应温度等因素对单体转化率和聚合物分子量的影响.结果表明,聚合反应动力...     

交联聚丙烯酸甲酯小球的微波加热水解

用微波炉加热使交联聚丙烯酸甲酯小球在氢氧化钠水溶液中水解，制得弱酸性丙烯酸型阳离子交换树脂。研究了加热时间、微波功率、溶胀剂、氢氧化钠水溶液的体积和反应器的形状等因素对水解反应的影响。     

丙烯酸稀土接枝剑麻纤维及性能研究

为改善剑麻纤维(SF)与聚合物基界面的相容性,制备了丙烯酸稀土接枝剑麻纤维,并对其结构进行表征。用过硫酸铵作为引发剂,把丙烯酸稀土接枝到剑麻纤维表面上。利用红外光谱仪、扫描电子显微镜、X射线粉末衍射仪对接枝剑麻纤维结构进行表征,结果表明丙烯酸稀土已成功接枝到剑麻纤维表面上。考察了接枝剑麻纤维热稳定性和吸油性能,结果表明接枝剑麻纤维的热稳定性、吸油性能优于剑麻纤维,饱和吸油量(24 h)达5.957 g.g-1,吸油倍率达4.727%。     

强酸性阳离子交换树脂催化合成丙烯酸—β—羟乙酯

在强酸型阳离子交换树脂催化下,以丙烯酸和乙二醇合成丙烯酸—β—羟乙酯,反应条件温和,操作简单,催化剂活性高,可以循环使用。     

Determination of the molecular-weight characteristics of polyacrylic acid and its copolymer with butyl acrylate

A new procedure was suggested for pretreatment of polyacrylic acid and its copolymer with butyl acrylate with the aim of examining the molecular-weight distribution: chemical modification by esterification with benzyl alcohol. Conditions were chosen for turbidimetric titration of the resulting polymers. The results confirmed the efficiency of isopropanol as chain-transfer agent in copolymerization of acrylic acid with butyl acrylate. The molecular-weight characteristics of polyacrylic acid prepared by radical polymerization in water in the presence of Cu(II) ions were determined.     

Synthesis and surface properties of self-crosslinking core–shell acrylic copolymer emulsions containing fluorine/silicone in the shell

Stable emulsions of a core–shell acrylic copolymer (non-crosslinkable V0, and crosslinkable V2, V4, V6, and V8, where the numbers indicate the wt% of crosslinking agent based on the total acrylate monomer content) containing butyl acrylate (BA, 45 wt%), glycidyl methacrylate (GMA, 45 wt%), heptadecafluorodecyl methacrylate (PFA, 10 wt%), and various contents of crosslinking agent (vinyltriethoxysilane, VTES) were synthesized using a three-stage seeded emulsion polymerization process with a small amount of surfactant. The average particle size and viscosity of emulsions increased significantly with increasing VTES content. This study examined the effects of the VTES content on the surface/mechanical properties of self-crosslinked copolymer film samples containing a fixed acrylate monomer content to find the optimum VTES content. XPS showed that the film–air surface of the copolymer samples had a higher fluorine/silicone content than the film–dish interface. The tensile strength/modulus, thermal stability, and two Tgs (α and β Tgs) of the film samples increased significantly with increasing VTES content. The contact angle of the film samples increased with increasing VTES content up to approximately 6 wt%, and then decreased slightly. The optimum VTES content was approximately 6 wt% based on the total acrylate monomer content to obtain a high water/oil repellent coating material (V6) with the highest water/methylene iodide-contact angles (118.2°/81.8°) and lowest surface energy (18.4 mN/m).     

Styrene–acrylic acid copolymers as new stabilizers of dispersion RAFT polymerization of butyl acrylate

The RAFT-based copolymers of acrylic acid and styrene may be successfully used as stabilizers of dispersion polymerization of butyl acrylate by providing the formation of stable block copolymer dispersion.     

端羟基聚丙烯酸酯改性水性聚氨酯

将丙烯酸丁酯(BA)、甲基丙烯酸甲酯(MMA)通过溶液自由基聚合,用巯基乙醇作为链转移剂调控合成了一定分子量的端羟基聚丙烯酸酯(PA),再与聚氨酯(PU)预聚体反应,在水中分散得到PA-PU-PA三嵌段共聚复合乳液。 采用FTIR和¹HNMR测试技术对共聚物结构进行了表征。 结果表明,随着PU与PA质量比的降低,共聚物中丙烯酸酯含量随之增加;PU软硬链段之间的氢键化作用减弱。 TEM显示,复合乳胶粒子形态均匀规整,并呈现明显的核壳结构。改性后的乳胶膜耐水、耐热性能均随着PU/PA质量比的减小而提高,吸水率由25%降低至5%,最大热失重温度由369 ℃提高至432 ℃。     

Synthesis and Dispersion Property of Poly(Butyl Acrylate-B-Acryl Amide) by Alkaline Reversed Atom Transfer Radical Polymerization in Emulsion: A Novel Amphiphilic Binder

The hydrophilic property of acrylate copolymer is very important for the dispersion and adhesion ability in many fields such as pigment printing and dyeing of textiles. Poly(butyl acrylate-b-acryl amide) was synthesized by successive reversal atom transfer radical polymerization of butyl acrylate and acryl amide in emulsion. The structure of the copolymer was characterized by infrared spectrum and nuclear magnetic resonance. By adding alkaline salt, the molecular weight and its distribution of the block copolymer were controlled. The dispersion ability of acrylic copolymer was improved by acryl amide segment; thus, preparation of a novel amphiphilic binder is expected to be helpful to solve the problems of the current binders.     

Synthesis of anionic amphiphilic diblock copolymers of poly(styrene) and poly(acrylic acid) by reverse iodine transfer polymerization (RITP) in solution and emulsion

Reverse iodine transfer polymerization (RITP), offering the appealing potential of the in situ generation of transfer agents out of molecular iodine I₂, is employed in the synthesis of anionic amphiphilic diblock copolymers of poly(styrene) and poly(acrylic acid). Starting with well‐characterized poly(styrene) as macro‐transfer agents synthesized by RITP, diblock copolymers poly(styrene)‐b‐poly(tert‐butyl acrylate) of various lengths are successfully yielded in solution with a good architectural control. These blocks are then subjected to acid deprotection and subsequent pH control to give rise to anionic amphiphilic poly(styrene)‐b‐poly(acrylic acid). Besides, homopolymers of tert‐butyl acrylate are produced by RITP both in solution and in emulsion. Furthermore, a fruitful trial of the synthesis of diblock copolymers poly(tert‐butyl acrylate)‐b‐poly(styrene) is carried out through chain extension of the poly(tert‐butyl acrylate) latex as a macro‐transfer agent in seeded emulsion polymerization of styrene. Finally, the prepared block copolymer is deprotected to bring about its amphiphilic nature and a pH control caters for its anionic character. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4389–4398     

Preparation and characterization of fluorine-containing acrylate copolymers by Co γ-ray radiation co-polymerization

A series of fluorine-containing acrylate copolymers were prepared by ⁶⁰Co γ-ray radiation co-polymerization in a mixed acrylate system, including butyl acrylate, acrylic acid, acrylonitrile, N-hydroxymethyl acrylamide and perfluoroalkylethyl methacrylate (FMA). The yield of the copolymers reached 96% when they were radiated for 34 h with the radiation dose of 1 kGy/h. Moreover, the surface structure and properties of the copolymers were determined by Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and contact angle (CA) analysis. And the glass-transition temperature was measured by dynamic mechanical thermal analysis (DMTA). It was found that the fluoropolymer was of large water static contact angle and fluorine was enriched at the polymer-air interface. The relationship between the copolymer composition, annealed temperature and static contact angle was also discussed in detail. Furthermore, when the FMA content reached 3%, the cotton treated with our products exhibited better oil repellency.     

SYNTHESIS OF POLYACRYLAMIDE WITH PENDANT POLY(BUTYL ACRYLATE) CHAINS USING THE MACROMER TECHNIQUE AND STUDIES ON THEIR PROPERTIES

INTRODUCTIONSince Milkovich and Chiang[1] developed a method of preparing copolymers with uniform side chains by usingthe macromer technique, the synthesis of copolymers with uniform side chains from different macromers hasbeen studied extensively. Milkovich et al. reported the synthesis of polystyrene macromer through termination ofliving polystyrene anions with methacryloyl chloride and its copolymerization with butyl acrylate to formthermoplastic elastomer[2]. Rempp[3] obtained polyoxy…     

Viscoelastic behaviour of butyl acrylate/styrene/2-hydroxyethyl methacrylate/acrylic acid latices thickened with associative thickeners

The rheological behaviour of butyl acrylate/styrene/acrylic acid latices thickened with a hydrophobically modified ethoxylated polyurethane (HEUR) or hydrophobically modified alkali-soluble polyacrylate emulsion (HASE) was investigated. While the pseudoplastic character of frequency dependence of complex viscosity was similar for both thickeners, viscoelastic behaviour, expressed as the ratio of loss and storage moduli, significantly differed, indicating that the HEUR molecules, unlike swollen HASE particles, create a viscoelastic space structure. The increase in hydrophilicity of the particle surface, achieved by incorporation of 2-hydroxyethyl methacrylate (HEMA) monomer into the latex copolymer reduced the viscoelasticity of latices thickened with HEUR, but not of those thickened with HASE. This confirms that adsorption of hydrophobic end-groups on particle surface is important for thickening of latices with HEUR and that a physical network of latex particles interconnected by the thickener macromolecules is formed. To cite this article: O. Quadrat et al., C. R. Chimie 6 (2003).     

含丙烯酸的苯丙共聚乳液乳胶粒形态的电镜研究

采用透射电镜观测了苯乙烯-丙烯酸丁酯-丙烯酸乳液共聚体系的乳胶粒形态,讨论了组分含量、共聚物链柔性和乳液pH值等因素对乳胶粒形态、乳液粘度及成膜性的影响.结果表明:软单体的加入和体系pH值的提高将促进乳胶粒的粘连成膜和溶涨及部分聚合物的溶解.羧基主要富集于乳胶粒表面.