CaSb2O6:Bi3+,Eu3+荧光粉的制备和发光性质

采用共沉淀法及1 200 ℃后续煅烧4 h,成功制备了CaSb₂O₆:Bi³⁺,Eu³⁺荧光粉,并对其结构及发光性能进行了研究。所制备荧光粉颗粒为六边形类圆饼状,平均尺寸在100~600 nm之间。对CaSb₂O₆:Bi³⁺,Eu³⁺发光的机理分析表明,Bi³⁺对Eu³⁺的发光存在高效的敏化与能量传递。当Bi³⁺和Eu³⁺的掺杂浓度分别为0.5%和8%,Eu³⁺位于580 nm(⁵D₀→⁷F₀ )处的荧光发射显著增强,Bi³⁺,Eu³⁺共掺样品的荧光强度是CaSb₂O₆:Eu³⁺的10倍左右。调节Bi³⁺/Eu³⁺离子掺杂比,色坐标呈现了从蓝、白光到红光的变化,表明该荧光粉可分别作为蓝或红色荧光粉使用,甚至可实现从蓝、白光到红光的自由调控,这为白光LED荧光粉的发展提供了参考。     

稀土Y2-xSiO5∶Eux3+纳米发光材料结构对发光性能影响及发光机理研究

用溶胶凝胶法合成了Y_2-xSiO₅∶Eu_x纳米发光材料，使用XRD、FTIR和TEM对其结构进行了表征。讨论了相结构、煅烧温度和Eu³⁺掺杂浓度对材料发光性能的影响及规律。结果显示煅烧温度在900 ℃以下，材料主要呈非晶相结构，900 ℃以上材料主要呈晶态结构；颗粒随煅烧温度升高而增大，在非晶态时颗粒大小在15～45 nm，在晶态时颗粒大小为60～80 nm。激发光谱和荧光发射光谱受材料晶相结构以及Eu³⁺掺杂浓度的影响，在晶态结构中Y_2-xSiO₅∶Eu_x纳米材料呈现更精细的激发和发射光谱。在激发光谱中，电荷转移态吸收(CST)随煅烧温度升高呈现兰移现象，晶态时CST同非晶态相比明显红移；在发射光谱中，非晶态时 ⁵D₀→ ⁷F₂跃迁呈现强的发光峰，随材料制备温度升高而增强，在晶态时该发光峰强度减弱，在长波波段呈现两个新的发光尖峰，并随煅烧温度升高而增强； ⁵D₀→ ⁷F₁发射峰从非晶态转变为晶态后，光谱裂分为三重尖峰；而 ⁵D₀→ ⁷F₀跃迁发光光谱受结构和颗粒大小影响较小。同时在60～80 nm的Y_2-xSiO₅∶Eu_x晶体中，发现材料 ⁵D₀→ ⁷F₂和 ⁵D₀→ ⁷F₁跃迁发光强度，均受Eu³⁺掺杂浓度的影响，当掺杂浓度x=0.4时，材料发光强度最大。     

Li4SrCa (SiO4)2:Eu3+红色荧光粉的合成及其发光性能

采用硅酸盐作为基质材料,通过高温固相法合成了Li₄SrCa（SiO₄）₂：Eu³⁺红色荧光粉。通过X射线粉末衍射、X射线光电子能谱、透射电镜和荧光光谱,对所得样品的物相、形貌及其发光性能进行了表征分析。结果表明,掺入Eu³⁺后,Li₄SrCa（SiO₄）₂的晶体结构并没有发生改变。在393 nm光激发下,荧光粉的荧光光谱中693 nm处发射峰强度最强。以693 nm作为监测波长,荧光激发峰分别为361 nm（⁷F₀→⁵D₄）、375 nm（⁷F₀→⁵G₃）、413 nm（⁷F₀→⁵D₃）、393 nm（⁷F₀→⁵L₆）和464 nm（⁷F₀→⁵D₂）,即样品对近紫外和蓝光有较好的吸收。利用发射光谱研究了Eu³⁺掺杂浓度（物质的量分数）对荧光粉发光强度的影响。当Eu³⁺的掺杂浓度x=0.10时,样品发射强度最强,发射红光,其色坐标为（0.637 5,0.353 7）。通过Dexter强度与浓度关系分析了浓度猝灭机制。     

多级结构Mg3B2O6:Eu3+花状微球的制备、表征及其发光性能

以硝酸镁(Mg(NO₃)₂·6H₂O)和硼砂(Na₂B₄O₇·10H₂O)为原料,稀土元素Eu³⁺为激活剂,采用聚乙烯吡咯烷酮(PVP)辅助共沉淀法得到前驱体,并通过焙烧制备了多级结构Mg₃B₂O₆:Eu³⁺花状微球。通过XRD、SEM、TEM以及荧光光谱等手段分别对前驱体煅烧产物的结构、形貌、组成和荧光特性进行了表征。实验表明,在波长为393 nm激发光的激发下,所得到的产品在612 nm处有明显的特征发射峰,对应于Eu³⁺的(⁵D₀→⁷F₂)特征跃迁发射。这一荧光性质使得该材料在荧光灯、显示系统和光电设备应用中具有广阔的前景。同时我们还探讨了微球的形态、Eu³⁺的掺杂量及焙烧温度对花状微球荧光性能的影响。     

Sr7Zr(PO4)6∶xEu2+蓝色荧光粉的合成及其发光特性

通过高温固相反应合成了新型的蓝色荧光粉Sr₇Zr(PO₄)₆∶xEu²⁺。通过X射线粉末衍射(XRD)、紫外可见(UV-Vis)吸收光谱、荧光光谱研究了Sr₇Zr(PO₄)₆∶xEu²⁺材料的相纯度及荧光性质。结果表明,Eu²⁺掺杂获得的Sr₇Zr(PO₄)₆∶xEu²⁺荧光粉为纯相,且200~400 nm范围内的近紫外(NUV)光均能对其进行有效的激发。在315 nm的激发下,Sr₇Zr(PO₄)₆∶xEu²⁺荧光粉发射出峰值位于415 nm左右的蓝光,且Eu²⁺在Sr₇Zr (PO₄)₆基质中的最佳掺杂浓度为0.05,相应的CIE色度坐标为(0.164,0.021),比商用BaMgAl₁₀O₁₇∶Eu²⁺(BAM)蓝色荧光粉具有更高的色纯度。     

多级结构Mg3B2O6: Eu3+花状微球的制备、表征及其发光性能

以硝酸镁(Mg(NO₃)₂·6H₂O)和硼砂(Na₂B₄O₇·10H₂O)为原料, 稀土元素Eu³⁺为激活剂, 采用聚乙烯吡咯烷酮(PVP)辅助共沉淀法得到前驱体, 并通过焙烧制备了多级结构Mg₃B₂O₆: Eu³⁺花状微球。通过XRD、SEM、TEM以及荧光光谱等手段分别对前驱体煅烧产物的结构、形貌、组成和荧光特性进行了表征。实验表明, 在波长为393 nm激发光的激发下, 所得到的产品在612 nm处有明显的特征发射峰, 对应于Eu³⁺的(⁵D₀→⁷F₂)特征跃迁发射。这一荧光性质使得该材料在荧光灯、显示系统和光电设备应用中具有广阔的前景。同时我们还探讨了微球的形态、Eu³⁺的掺杂量及焙烧温度对花状微球荧光性能的影响。     

La3+掺杂CaFe2O4材料的制备及室温检测超低浓度甲醛

采用静电纺丝法成功制备了La³⁺掺杂CaFe₂O₄材料。通过X射线衍射、扫描电子显微镜和X射线光电子能谱对La³⁺掺杂CaFe₂O₄材料的结构和形貌进行了表征。随后，研究了La³⁺的掺杂量（质量分数）对CaFe₂O₄气敏性能的影响。研究表明，3% La³⁺掺杂CaFe₂O₄材料在室温下对100 μL·L^-1甲醛的响应最高（R_a/R_g=14.1）。更为重要的是，对甲醛的最低检测限低至0.1 nL·L^-1，并且响应/恢复时间仅为4.3 s/8.4 s。     

KMgF3∶Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce³⁺→Tb³⁺的发光特性以及它们之间的相互作用,结果表明KMgF₃∶Ce³⁺,Tb³⁺纳米粒子中存在Ce³⁺→Tb³⁺的能量传递过程,即Ce³⁺可以将吸收的能量直接传递给Tb³⁺离子,使得Tb³⁺的绿色发光强度大为增加。     

Eu3+掺杂B2O3-CaO发光材料的制备及其发光性能

采用溶胶凝胶法制得高纯的B₂O₃-CaO∶Eu³⁺荧光粉。用XRD、IR对不同退火温度下所得样品的结构进行表征,结果发现随退火温度的变化,能形成不同结构的硼酸盐基质。通过对以不同结构硼酸盐为基质荧光粉的激发、发射谱图及荧光衰减曲线的分析,探讨了材料的发光性能和发光机理。结果表明,在不同结构硼酸盐基质中,Eu³⁺都处于无反演对称中心格位,以（⁵D₀→F₂）电偶极跃迁为主,所以材料主要发红光;且900℃退火所得高纯相的CaB₂O₄基质最有利于发光、对应的荧光衰减时间最长,这都因在此荧光粉中Eu³⁺更易取代Ca²⁺,并形成相对较多的p-n结和陷阱所致。     

超细红色荧光粉LaMgAl11O19:Eu3+的制备与发光性能

采用凝胶-燃烧法制备了稀土Eu³⁺掺杂的LaMgAl₁₁O₁₉红色荧光粉的前驱粉末, 在低于700℃退火处理时, 得到非晶态样品, 而高于850℃退火处理后为单一六方相结构LaMgAl₁₁O₁₉:Eu³⁺样品. SEM结果表明, 该法制备的样品为颗粒分布均匀, 粒径在200~400 nm之间的超细粉末. 通过激发光谱和发射光谱研究了Eu³⁺在LaMgAl₁₁O₁₉基质中的发光性能, 结果显示, 非晶态和晶态La_1-xMgAl₁₁O₁₉:x Eu³⁺样品都可发光, 在613 nm波长光的监测下所得荧光粉的激发光谱为一宽带和系列锐峰, 其最强激发峰出现在蓝光465 nm处, 次强峰为394 nm, 表明该荧光粉与广泛使用的紫外和蓝光LED芯片的输出波长相匹配. 在465 nm波长光的激发下观察到超细LaMgAl₁₁O₁₉粉末中Eu³⁺的613 nm (⁵D⁰→⁷F₂)强的特征发射, 且随着粉末逐渐成相⁵D⁰→⁷F₂跃迁明显增强, 说明LaMgAl₁₁O₁₉:Eu³⁺超细粉末可作为白光LED的红色补偿荧光粉.     

La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)/Tb~(3+)荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为5D0→7F2特征能级跃迁,Eu~(3+)的最优掺杂浓度为0.08,对应的CIE坐标为(0.610 2,0.382 3);La_7O_6(BO_3)(PO_4)_2∶Tb~(3+)材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb~(3+)的5D4→7F5能级跃迁,Tb~(3+)离子的最优掺杂浓度为0.15,对应的CIE坐标为(0.317 7,0.535 2)。此外,对2种材料的变温光谱分析发现Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2荧光材料均具有良好的热稳定性。     

Photoluminescence properties of a novel phosphor, Na3La9O3(BO3)8:RE(RE=Eu,Tb)

The new oxyborate phosphors, Na₃La₉O₃(BO₃)₈:Eu³⁺ (NLBO:Eu) and Na₃La₉O₃(BO₃)₈:Tb³⁺ (NLBO:Tb) were prepared by solid-state reactions. The photoluminescence characteristics under UV excitation were investigated. The dominated emission of Eu³⁺ corresponding to the electric dipole transition ⁵D₀→⁷F₂ is located at 613 nm and bright green luminescence of NLBO:Tb attributed to the transition ⁵D₄→⁷F₅ is centered at 544 nm. The concentration dependence of the emission intensity showed that the optimum doping concentration of Eu and Tb is 30% and 10%, respectively.     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

Photoluminescence properties of La(PO3)3:Tb under VUV excitation

La_1−x(PO₃)₃:Tb_x³⁺ (0<x0.6) were prepared using solid-state reaction. The vacuum ultraviolet (VUV) excitation spectrum of La_0.55(PO₃)₃:Tb_0.45³⁺ indicates that the absorption of (PO₃)₃³⁻ groups locates at about 163 and 174 nm and the absorption bands of (PO₃)₃³⁻ groups (174 nm) and La³⁺–O²⁻ (200 nm) and Tb³⁺ (213 nm) overlap each other. These results imply that the (PO₃)₃³⁻ groups can efficiently absorb the excited energy around 172 nm and transfer the energy to Tb³⁺. Under 172 nm excitation, the optimal photoluminescence (PL) intensity is obtained when Tb concentration reaches 0.45 and is about 71% of commercial phosphor Zn_1.96SiO₄:0.04 Mn²⁺ with chromaticity coordinates of (0.343, 0.578) and the decay time of about 4.47 ms.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Eu luminescence—a structural probe in BiCa4(PO4)3O, an apatite related phosphate

Eu³⁺ luminescence is studied in apatite-related phosphate BiCa₄(PO₄)₃O. Compositions of the formula Bi_1−xEu_xCa₄(PO₄)₃O [x=0.05, 0.1, 0.3, 0.5, 0.8 and 1.0] are synthesized and they are isostructural with parent BiCa₄(PO₄)₃O. Room temperature photoluminescence shows the various transitions ⁵D₀→⁷F_J(=0,1,2) of Eu³⁺. The emission results of compositions with different Eu³⁺ content show the difference in site occupancy of Eu³⁺ in Bi_1−xEu_xCa₄(PO₄)₃O. The intense ⁵D₀-⁷F₀ line at 574 nm for higher Eu³⁺ content is attributed to the presence of strongly covalent Eu-O bond that is possible by substituting Bi³⁺ in the Ca(2) site. This shows the preferential occupancy of Bi³⁺ in Ca(2) site and this has been attributed to the 6s² lone pair electrons of Bi³⁺. This is further confirmed by comparing the emission results with La_0.95Eu_0.05Ca₄(PO₄)₃O.     

Synthesis of Gd3PO7:Eu nanospheres via a facile combustion method and optical properties

Eu³⁺-doped Gd₃PO₇ nanospheres with an average diameter of ∼300 nm and a narrow size distribution have been prepared by a facile combustion method and structurally characterized by X-ray diffraction and field emission scanning electron microscopy. The luminescent properties were systemically studied by the measurement of excitation/emission spectra, and emission spectra under different temperatures, as well as by photostability. The strong red-emission intensity peaking at 614 nm originates the ⁵D₀→⁷F₂ transition and is observed under 254-nm irradiation, indicating that Eu³⁺ ions in Gd₃PO₇ mainly occupied non-centrosymmetry sites. The CIE1931 XY chromaticity coordinates of Gd₃PO₇:Eu³⁺ nanospheres are (x=0.654, y=0.345) in the red area, which is near the National Television Standard Committee standard chromaticity coordinates for red. Thus, Gd₃PO₇:Eu³⁺ nanospheres may be potential red-emitting phosphors for PDP and Xe-based mercury-free lamps.     

M5(PO4)3F (M=Ca, Sr, Ba)中Sm3+的电荷迁移态及Sm3+和Eu3+的电荷迁移能量关系

采用高温固相反应合成了M_5-2xSm_xNa_x(PO₄)₃F(M=Ca,Sr,Ba)荧光体,研究了其在真空紫外-可见光范围的发光特性。发现在Ca₅(PO₄)₃F中Sm³⁺的电荷迁移带约在191 nm,在Sr₅(PO₄)₃F中约在199 nm,而在Ba₅(PO₄)₃F中约在204 nm,随着被取代碱土离子半径的增大电荷迁移能量逐渐减小。比较了M₅(PO₄)₃F (M=Ca,Sr,Ba)中Sm³⁺和Eu³⁺电荷迁移能量的关系。     

Synthesis, vacuum ultraviolet and near ultraviolet-excited luminescent properties of GdCaAl3O7: RE (RE=Eu, Tb)

Vacuum ultraviolet (VUV) excitation and photoluminescent (PL) properties of Eu³⁺ and Tb³⁺ ion-doped aluminate phosphors, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ have been investigated. X-ray diffraction (XRD) patterns indicate that the phosphor GdCaAl₃O₇ forms without impurity phase at 900 °C. Field emission scanning electron microscopy (FE-SEM) images show that the particle size of the phosphor is less than 3 μm. Upon excitation with VUV irradiation, the phosphors show a strong emission at around 619 nm corresponding to the forced electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The results reveal that both GdCaAl₃O₇:RE³⁺ (RE=Eu, Tb) are potential candidates as red and green phosphors, respectively, for use in plasma display panel (PDP).