维生素E绿色还原法制备银纳米粒子的研究

采用一种绿色还原法制备银纳米粒子,以维生素E为还原剂,淀粉为稳定剂,在液相中还原硫酸银,通过改变溶液的pH值和反应时间,得到不同粒径的黄色银纳米粒子,并分别采用透射电镜、红外光谱、紫外-可见吸收光谱、扫描电镜和电化学方法对银纳米粒子进行表征。结果表明:维生素E在溶液中被氧化生成苯醌,反应得到的银纳米粒子为球形,粒径为8~25 nm;在较强碱性条件下,得到的银纳米粒子尺寸较小,分布较均匀,其平均粒径约为10 nm;不同条件下生成的银溶胶分别在417、411、409、408 nm处出现紫外吸收峰,这些吸收峰均为银纳米粒子的表面共振吸收;生成的银纳米粒子具有很好的电化学性质,并对L-半胱氨酸的电化学反应显示了良好的催化活性。     

Preparation, characterization, and optical properties of gold, silver, and gold-silver alloy nanoshells having silica cores

This report describes the structural and optical properties of a series of spherical shell/core nanoparticles in which the shell is comprised of a thin layer of gold, silver, or gold-silver alloy, and the core is comprised of a monodispersed silica nanoparticle. The silica core particles were prepared using the St?ber method, functionalized with terminal amine groups, and then seeded with small gold nanoparticles (approximately 2 nm in diameter). The gold-seeded silica particles were coated with a layer of gold, silver, or gold-silver alloy via solution-phase reduction of an appropriate metal ion or mixture of metal ions. The size, morphology, and elemental composition of the composite nanoparticles were characterized by field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermal gravimetric analysis (TGA), dynamic light scattering (DLS), and transmission electron microscopy (TEM). The optical properties of the nanoparticles were analyzed by UV-vis spectroscopy, which showed strong absorptions ranging from 400 nm into the near-IR region, where the position of the plasmon band reflected not only the thickness of the metal shell, but also the nature of the metal comprising the shell. Importantly, the results demonstrate a new strategy for tuning the position of the plasmon resonance without having to vary the core diameter or the shell thickness.     

Role of phenol derivatives in the formation of silver nanoparticles

We demonstrate that dihydroxy benzenes are excellent reducing agents and may be used to reduce silver ions to synthesize stable silver nanoparticles in air-saturated aqueous solutions. The formation of Ag nanoparticles in deaerated aqueous solution at high pH values suggests that the reduction of silver ions occurs due to oxidation of dihydroxy benzenes and probably on the surface of Ag2O. Pulse radiolysis studies show that the semi-quinone radical does not participate in the reduction of silver ions at short time scales. Nevertheless, results show that primary intermediates undergo slower transformation in the presence of dihydroxy benzenes than in their absence. This slow transformation eventually leads to the formation of silver nanoparticles. The Ag nanoparticles were characterized by UV-vis absorption spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). XRD and TEM techniques showed the presence of Ag nanoparticles with an average size of 30 nm.     

G1 dendrimers-mediated evolution of silver nanostructures from nanoparticles to solid spheres

With the control of G1 poly(amidoamine) (PAMAM), an evolutionary course of stable colloidal silver from discrete nanoparticles to solid spheres through ultraviolet irradiation reduction of silver nitrate solutions was observed by transmission electron microscopy (TEM). The morphologies of the products depend on the Ag+ concentration. A mechanism of globular assembly was put forward to interpret the evolution of the nanostructures. Powder X-ray diffraction (XRD), electron diffraction (ED) patterns, and X-ray photoelectron spectroscopy (XPS) indicate the presence of cubic symmetry silver. XPS and Fourier transform infrared (FT-IR) spectroscopy confirm that dendrimers have participated in the stabilization and control of Ag nanostructures. In the UV-vis spectra, the intense surface plasmons are centered at 425 and 430 nm corresponding to the shapes of dots and solid spheres, respectively. The solid spheres exhibit excellent catalytic efficiency on the reduction of 2,7-dicholoroflurescein (DCF).     

First successful design of semi-IPN hydrogel-silver nanocomposites: a facile approach for antibacterial application

Semi-IPN hydrogels in which poly(vinyl pyrrolidone) (PVP) chains were physically dispersed throughout poly(acrylamide) (PAM) gel networks were synthesized. These semi-IPN hydrogel networks can act as excellent nanoreactors for producing and stabilizing metal nanoparticles. The current methodology allows us to entrap metal nanoparticles throughout hydrogel networks via PVP chains. An optimized semi-IPN hydrogel formulation was found to produce silver nanoparticles, ca. 3-5 nm. The synthesized semi-IPN hydrogel-silver nanocomposites were fully characterized by using UV-vis, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The developed semi-IPN hydrogel-silver nanocomposite (SHSNC) was evaluated for preliminary antibacterial applications.     

利用模板法制备Ag纳米线

利用阳极氧化铝（AAO）作为模板,制备出高定向的Ag纳米线．Ag纳米线的形貌由环境扫描电镜证实,并通过X-射线能谱（EDX）、X-射线粉末衍射谱（XRD）测试手段进行了表征．     

壳聚糖改性织物中原位合成银纳米粒子

采用壳聚糖改性棉和涤纶织物,通过织物表面的壳聚糖原位吸附、还原银离子制备了纳米银抗菌织物.用场发射扫描电子显微镜(SEM)、X射线能谱(EDA)、X射线粉末衍射仪(XRD)和反射光谱等对纳米银织物进行了表征,研究了银离子浓度和壳聚糖浓度对纳米银织物的影响,并检测了纳米银织物的抗菌性能.结果表明,在无需任何还原剂的条件下,壳聚糖改性的棉和涤纶织物表面可以均匀地形成银纳米粒子,晶粒大小为5~10 nm,所制备的纳米银织物均具有优异的抗菌性能.     

Preparation of Cd-doped SnO<Subscript>2</Subscript> nanoparticles by sol–gel route and their optical properties

Nanocrystalline cadmium doped tin oxide (SnO₂) powders of about 2.5–4.5 nm in size have been synthesized by using different solvents via sol–gel method. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Energy dispersive X-ray analysis (EDX), Transmission electron spectroscopy (TEM), UV-Vis absorption and Photoluminescence (PL) spectroscopy. The PL emission spectra revealed that the band centered at 452 nm might be related with oxygen vacancies. A spherical, small rod and slice like morphologies of the prepared Cd-SnO₂ nanoparticles were observed in the SEM and TEM studies. The presence of Cd modifies the structural, morphological and optical properties of the tin oxide nanoparticles.     

Green biosynthesis of silver nanoparticles using Callicarpa maingayi stem bark extraction

Different biological methods are gaining recognition for the production of silver nanoparticles (Ag-NPs) due to their multiple applications. The use of plants in the green synthesis of nanoparticles emerges as a cost effective and eco-friendly approach. In this study the green biosynthesis of silver nanoparticles using Callicarpa maingayi stem bark extract has been reported. Characterizations of nanoparticles were done using different methods, which include; ultraviolet-visible spectroscopy (UV-Vis), powder X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray fluorescence (EDXF) spectrometry, zeta potential measurements and Fourier transform infrared (FT-IR) spectroscopy. UV-visible spectrum of the aqueous medium containing silver nanoparticles showed absorption peak at around 456 nm. The TEM study showed that mean diameter and standard deviation for the formation of silver nanoparticles were 12.40 ± 3.27 nm. The XRD study showed that the particles are crystalline in nature, with a face centered cubic (fcc) structure. The most needed outcome of this work will be the development of value added products from Callicarpa maingayi for biomedical and nanotechnology based industries.     

Green fabrication of silver nanoparticles via Ipomea carnea latex extract: Antibacterial activity

A versatile green and nontoxic begin method for bio-reduction of silver nanoparticles (AgNPs) using latex extract of Ipomea carnea was reported. Different instrumental tools were applied to evaluate the formation of AgNPs, as an example UV–Visible spectroscopy (UV–Vis), Fourier transform infra-red (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HR-TEM). The absorption peak of AgNPs obtained at around 413 nm. FTIR study confirmed that the bio-capping components present in latex extract served as reducing and stabilizing agent. The findings of XRD, SEM and HR-TEM images revealed that the formation of crystalline and spherical shape nanoparticles and showed well size distribution with mean size 9.8±0.27 nm. Additionally, the green fabricated AgNPs exhibited considerable zone of inhibition for both Gram-positive and Gram–negative bacteria. The outcome implies that the synthesized AgNPs also showed similar inhibition effect as streptomycin (a common reference antibiotic).     

Murraya Koenigii leaf-assisted rapid green synthesis of silver and gold nanoparticles

A facile bottom-up 'green' and rapid synthetic route using Murraya Koenigii leaf extract as reducing and stabilizing agent produced silver nanoparticles at ambient conditions and gold nanoparticles at 373 K. The nanoparticles were characterized using UV-vis, transmission electron microscopy (TEM), X-ray diffraction (XRD) and FTIR analysis. This method allows the synthesis of well-dispersed silver and gold nanoparticles having size ～10 nm and ～20 nm, respectively. Silver nanoparticles with size ～10 nm having symmetric SPR band centered at 411 nm is obtained within 5 min of addition of the extract to the solution of AgNO3 at room temperature. Nearly spherical gold nanoparticles having size ～20 nm with SPR at 532 nm is obtained on adding the leaf extract to the boiling solution of HAuCl4. Crystallinity of the nanoparticles is confirmed from the high-resolution TEM images, selected area electron diffraction (SAED) and XRD patterns. From the FTIR spectra it is found that the biomolecules responsible for capping are different in gold and silver nanoparticles. A comparison of the present work with the author's earlier reports on biosynthesis is also included.     

Extracellular biosynthesis of functionalized silver nanoparticles by strains of Cladosporium cladosporioides fungus

In the present investigation, we report the extracellular biosynthesis of silver nanoparticles (AgNP) employing the fungus Cladosporium cladosporioides. The extracellular solution of C. cladosporioides was used for the reduction of AgNO(3) solution to AgNP. The present study includes time dependent formation of AgNP employing UV-vis spectrophotometer, size and morphology by employing TEM (transmission electron microscopy), structure from powder X-ray diffraction (XRD) technique and understanding of protein-AgNP interaction from Fourier transform infrared (FT-IR) spectroscopy. The AgNP were 10-100nm in dimensions as measured by TEM images.     

Antibacterial cotton fabrics with in situ generated silver and copper bimetallic nanoparticles using red sanders powder extract as reducing agent

Using aqueous extraction of red sanders powder as a reducing agent, silver and copper bimetallic nanoparticles were in situ generated in cotton fabrics. Silver and copper nanoparticles were also generated separately for comparison. The resulted nanocomposite cotton fabrics (NCFs) were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and antibacterial tests. SEM analysis indicated the generation of more number of nanoparticles when bimetallic source solutions were used. Further, the size range of the generated bimetallic nanoparticles was found to be lower than when individual metal nanoparticles were generated in NCFs. XRD analysis confirmed the in situ generation of silver and copper nanoparticles when equimolar bimetallic salt source solutions were utilized. The NCFs with bimetallic nanoparticles exhibited higher antibacterial activity against both Gram-negative and Gram-positive bacteria and hence can be considered for applications as antibacterial bed and dressing materials.     

Green Synthesis of Silver Nanoparticles Using an Aqueous Extract of <Emphasis Type="Italic">Monotheca buxifolia</Emphasis> (Flac.) Dcne

This study deals with the synthesis and physicochemical investigation of silver nanoparticles using an aqueous extract of Monotheca buxifolia (Flac.). On the treatment of aqueous solution of silver nitrate with the plant extract, silver nanoparticles were rapidly fabricated. The synthesized particles were characterized by using UV–visible spectrophotometry (UV), Fourier transform infrared spectroscopy (FTIR), Energy dispersive X-ray (EDX) and Scanning electron microscopy (SEM). The formation of AgNPs was confirmed by noting the change in colour through visual observations as well as via UV–Vis spectroscopy. UV–Vis spectrum of the aqueous medium containing silver nanoparticles showed an absorption peak at around 440 nm. FTIR was used to identify the chemical composition of silver nanoparticles and Ag-capped plant extract. The presence of elemental silver was also confirmed through EDX analysis. The SEM analysis of the silver nanoparticles showed that they have a uniform spherical shape with an average size in the range of 40–78 nm. This green system showed better capping and stabilizing agent for the fine particles. Further, in vitro the antioxidant activity of Monotheca buxifolia (Flac.) and Ag-capped with the plant was also evaluated using FeCl₃/K₃Fe (CN)₆ essay.     

In2O3八面体的碳还原法制备及其发光性能研究

In₂O₃ octahedrons were synthesized by carbothermal reduction using In₂O₃ nanoparticles as the source material. The as-synthesized products were characterized by X-ray powder diffraction (XRD), energy dispersive X-ray(EDX), scanning electron microscopy(SEM), transmission electron microscopy(TEM), high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction analysis(SAED) and Room-temperature photoluminescence(PL) spectroscopy. The results show that the products are single-crystalline In₂O₃ octahedrons, the length of the octahedrons is in the range of 400～3 000 nm; the PL patterns display two peaks located at 447nm and 555 nm upon excitation at 380 nm, and the other two peaks located at 444 nm and 550 nm upon excitation at 325 nm; the excitation pattern shows two peaks located at 274 nm and 371 nm, respectively. The growth mechanism of the In₂O₃ octahedrons is discussed, and the high supersaturation ratio is considered as the key factor.     

Preparation of carbon nanotubes/BiOBr composites with higher visible light photocatalytic activity

A novel flower-like photocatalyst CNTs/BiOBr was successfully prepared by a facile hydrothermal method. The morphology and the physicochemical properties of the prepared samples were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectrometry (EDX), and UV-visible diffuse reflectance spectroscopy (UV-vis DRS). The photocatalytic activity was evaluated by degradation of Rhodamin B (RhB) dye. It was demonstrated that CNTs/BiOBr photocatalyst could effectively photodegrade RhB under visible light (VL) irradiation.     

Biosynthesis of Highly Dispersed Palladium Nanoparticles Using Astraglmanna Aqueous Extract

Biosynthesis of nanoparticles has received increased attention due to a growing need to develop environmentally benign technologies in material synthesis and employment of secondary metabolites from plant extract that has emerged as a novel technology for this purpose. In this study, a rapid and biogenic process for fabrication of palladium nanoparticles (PdNPs) is reported. Highly dispersed palladium nanoparticles were successfully prepared by using aqueous extract of Astraglmanna, a non‐toxic and eco‐friendly material, without extra surfactant, capping agent, and template. The PdNPs were characterized by using UV—Visible spectroscopy, scanning electron microscope ‐ energy dispersive spectra (SEM‐EDX), Fourier transform infra red spectroscopy (FTIR), dynamic light scattering (DLS) and X‐ray diffraction (XRD) analysis. Transmission electron microscopic (TEM) images of the PdNPs were recorded and mean size of the biosynthesized nanoparticles was found to be approximately 15 nm.     

A simple approach to the synthesis of silver nanowires by hydrothermal process in the presence of gemini surfactant

Silver nanowires were synthesized by the hydrothermal route in aqueous solution of gemini surfactant 1,3-bis(cetyldimethylammonium) propane dibromide (16-3-16) at a relatively low temperature. The as-prepared silver nanowires were characterized by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), transmission electron microscope (TEM), electron diffraction (ED), and UV-vis absorption spectrum. The obtained silver nanowires are of high aspect ratios with an average diameter of approximately 30 nm and length ranging from several to tens of micrometers.     

Preparation of high-stable silver nanoparticle dispersion by using sodium alginate as a stabilizer under gamma radiation

Highly stable silver nanoparticles were successfully synthesized by gamma ray irradiation in the presence of sodium alginate. The silver nanoparticles were characterized by UV–vis spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). Their particle sizes were in the range of 6–30 nm. The as-obtained Ag nanoparticle dispersion was stable for over 6 months at room temperature.     

Incorporation of CoS nanoparticles into ZSM-5 zeolite by hydrothermal and ion exchange methods

Cobalt sulfide nanoparticles were introduced into the medium-pore zeolite ZSM-5 (Zeolite Scony Mobil Five) by ion exchange in aqueous suspension and also by the addition of cobalt sulfate to the synthesis gel in hydrothermal zeolite synthesis. The latter method was systematically studied in the presence of tetraethylammonium ions as organic agents. The materials were characterized by chemical analysis, x-ray diffraction (XRD), scanning electron microscopy (SEM), Transmission electron microscopy (TEM), energy dispersion x-ray (EDX), IR, BET and diffuse reflectance spectroscopy (DRS). SEM picture and BET were used to discriminate between CoS nanoparticles in the zeolite pores and on the outer crystal surface. Their crystalline structure and morphology were studied by XRD and scanning electron microscopy. The results showed that in hydrothermal method zeolite acts as a template. CoS nanoparticles with an approximate size of 22 nm grow on the surface of zeolite. In ion exchange method, however, the majority of CoS nanoparticles are about 6 nm in diameter, located on the surface of the MFI (type materials ZSM-5) structure. Exciton absorption peaks at higher energy than the fundamental absorption edge of bulk CoS indicate quantum confinement effect in nanoparticles as a consequence of their small size. The absorption spectra show that the optical band gap for CoS nanoparticles produced by hydrothermal and ion exchange methods is 3.68 and 4.1 eV, respectively.