Regulation of metal ion recognition by allosteric effects in thiacalix[4]crown based receptors

Three new ditopic receptors 3a-c based on thiacalix[4]arene of 1,3 alternate conformation possessing two different complexation sites have been designed and synthesized for both soft and hard metal ions. The imino nitrogens bind soft metal ion (Ag⁺/Pb²⁺/Cu²⁺) and the crown moiety binds K⁺ ion. The preliminary investigations show that 3a-c behave as ditopic receptors for Ag⁺/K⁺, Pb²⁺/K⁺, and Cu²⁺/K⁺ ions, respectively. In all the three receptors it was observed that the formation of 3a·Ag⁺/3b·Pb²⁺/3c·Cu²⁺ complex triggers the decomplexation of K⁺ ion from crown moiety and acts as a gateway, which regulates the binding of alkali metal to crown moiety. Thus, allosteric binding between metal ions ‘switch off’ the recognition ability of crown ether ring.     

Ratiometry of monomer/excimer emissions of dipyrenyl thiacalix[4]arene for Cu detection: a potential Cu and K switched INHIBIT logic gate with NOT and YES logic functions

A new thiacalix[4]arene derivative 2 of 1,3-alternate conformation possessing two pyrene groups has been synthesized and examined for its cation recognition abilities towards different cations such as lithium, sodium, potassium, nickel, zinc, cadmium, silver, mercury, lead and copper by fluorescence spectroscopy. In CH₃CN/CH₂Cl₂ (1:1), the presence of Cu(II) induces the formation of a 1:2 ligand/metal complex, which exhibits increasing monomer emission at 376 nm at the expense of the fluorescent excimer emission of 2 centered at 476 nm. In the presence of K⁺, the intensity of the excimer emission increases along with the formation of a new blue shifted band at 435 nm which corresponds to a static dimer. The compound behaves as a fluorescent molecular switch upon chemical input of Cu²⁺ and K⁺.     

Novel fluorescent sensor for Ag and Hg based on the BINOL-pyrene derivative via click reaction

A novel BINOL-pyrene derivative sensor 1 for Ag⁺ and Hg²⁺ incorporating the triazole moieties and pyrenes was synthesized via click reaction. Binding of Ag⁺ ion induces the formation of 1:1 Ag⁺-1 chelating complex, and occurs in a ratiometric manner through an enhanced monomer and declining excimer emission, which make it possible to ratiometrically detect Ag⁺. The competitive experiment shows 1 can be used as an Ag⁺ specific fluorescence sensor over a wide range of competing cations. In the meanwhile, the sensor 1 was found to be selectively quenched by only Hg²⁺ at both monomer and excimer emission. Furthermore, we obtained evidences for different fluorescence signaling behaviors with Ag⁺ and Hg²⁺ by ¹H NMR titration experiments.     

Synthesis,crystal structure and complexation behaviour of a thiacalix[4]arene bearing 1,2,3-triazole groups

The structure and complexation behaviour of 1,3-alternate-1,2,3-triazole based on thiacalix[4]arene,1,3-alternate-1 and 2 have been determined by means of X-ray analysis, fluorescence and ¹H NMR spectroscopy. The X-ray results suggested that the nitrogen atom N3 on triazole ring can act as hydrogen bond acceptors in the self-assembly of a supramolecular structure. The fluorescence spectra changes indicated that the thiacalix[4]arene bearing 1,2,3-triazole groups were highly selective for Ag⁺ in comparison with other tested metal ions by enhancement of the monomer emission of pyrene. The ¹H NMR results suggested that Ag⁺ can be strongly bonded by the triazole groups with the cooperation of the ionophoric cavity formed by the two inverted benzene rings and the sulfur atoms of the thiacalix[4]arene.     

Allosteric bindings of thiacalix[4]arene-based receptors with 1,3-alternate conformation having two different side arms

A novel ditopic receptor possessing two complexation sites such as crown ether and 2-pyridylmethyl groups bearing 1,3-alternate conformation based on thiacalix[4]arene was prepared. The binding behaviors with Li⁺ and Ag⁺ have been examined by ¹H NMR titration experiment. The exclusive formation of mononuclear complexes of 1,3-alternate-5 with Li⁺ and Ag⁺ was observed even though the formation of the heterogeneous dinuclear complexes was expected. The decomplexation of Li⁺ from the crown moiety of 1:1 complex 1,3-alternate-5?Li⁺ to form the Ag⁺?1,3-alternate-5 complex by addition of AgSO₃CF₃ clearly shows that pyridyl moiety works as an efficient switch-off of the recognition ability of the crown moiety. We have also developed the construction of hydrogen-bonding self-assembly heterodimeric systems based on bis(4-pyridyl) and dicarboxylic acid thiacalix[4]arene derivatives in 1,3-alternate conformation. Their supramolecular behaviors are studied by ¹H NMR titration experiments with K⁺ and Ag⁺ ions. Although the values of the dimerization constants are relatively small, the stability of the dimers is strong enough to overcome only small conformational changes upon complex formation.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

F-Induced ‘turn-on’ fluorescent chemosensor based on 1,3-alt thiacalix[4]arene

A new thiacalix[4]arene based fluorescent sensor 1 bearing two naphthyl groups has been synthesized in 1,3-alternate conformation. In the absence of fluoride ion, the receptor 1 is in ‘off-state’ showing no fluorescence emission. The presence of fluoride ion triggered the fluorescence emission to ‘on-state’. The receptor shows pronounced selectivity for fluoride ions. In THF, the presence of F⁻ ions induces the formation of a 1:1 (G:H) complex.     

Metal ion induced FRET On-Off in naphthyl-pyrenyl pendent tetrahomodioxacalix[4]arene

A novel tetrahomodioxacalix[4]arene (7) bearing both naphthyl- and pyrenyl-amide pendants was synthesized as FRET-based fluorometric sensor for Cu²⁺ ion. Intramolecular FRET from the naphthalene emission to the pyrene absorption affords Cu²⁺ ion selectivity over other metal ions. Upon addition of Cu²⁺ ion, the complex solution of 7 gave a significantly decreased pyrene acceptor emission along with an enhancement of naphthalene donor emission via FRET On-Off event.     

Selective metal detection in an unsymmetrical 1,3-alternate calix[4]biscrown chemosensor

Calix[4]crown-based chemosensors 1, 2, and reference 3 have been synthesized. The weak fluorescence intensity of 1,5-naphthalene of 1 suggests that the benzene rings of the calix[4]arene as well as the oxygen atoms of the crown-5 ring take part in PET. The complexation of two K⁺ ions by both crown-5 and 1,5-naphthalene-crown-6 loops of 1 caused fluorescence enhancement of the naphthalene unit by CHEF. Pb²⁺ acted as a quenching metal ion.     

A novel BINOL-based cyclophane via click chemistry: synthesis and its applications for sensing silver ions

A novel BINOL-based cyclophane 1 incorporating two triazole moieties was synthesized via click chemistry and characterized. Among the metal ions screened, only Ag⁺ was found to have the ability to quench the fluorescence of 1 in methanol solution. The 1:1 binding mode of 1-Ag⁺ was confirmed. The competitive experiment showed that compound 1 can be used as a specific fluorescent sensor for Ag⁺ over a wide range of competing cations.     

Mesitylene based azo-coupled chromogenic tripodal receptors—a visual detection of Ag(I) in aqueous medium

A series of novel tripodal ligands 3a-d, based on a mesitylene anchor, containing aza-thioethers as donor atoms and coupled with 4-(4/3/2-nitrophenyl)azophenol or 4-(2-chlorophenyl)azophenol have been synthesized as chromogenic receptors, which are highly selective for silver(I). The complexation behavior of 3a-d with various metal ions has been evaluated by UV-vis spectrometry in dioxane/water (1:9/v:v) solution at 25 °C. The UV-vis spectra show that the complexation of 3a-c with Ag⁺ have pronounced bathochromic shifts accompanied by a unique color change in the solution from yellow to red, which is visible with the naked eye. The ligands do not show any significant change on addition of other metal ions like Li⁺, Na⁺, K⁺, Sr²⁺, Ca²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Pb²⁺, Ni²⁺, and Cu²⁺ and thus are highly specific and selective for Ag⁺ in the aqueous medium.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

Dual-mode recognition of transition metal ions by bis-triazoles chained pyrenes

Fluorescent chemosensors 7−10, with variable methylene chain length as spacers between the two triazole methyl ether units, have been synthesized under ‘Click’ condition, where the bistriazoles are used as the metal ion binding sites and the pyrenes as the fluorophores. Compound 10, having the longest methylene chain among 7−10, shows monomer and excimer fluorescence quenching in acetonitrile toward Ni²⁺, Pb²⁺, Cu²⁺, Hg²⁺, and Cr³⁺ ions, however, it shows an enhanced monomer but a decreased excimer emission when complexed with Cd²⁺ and Zn²⁺ ions.     

Synthesis of crownophanes possessing bipyridine moieties: bipyridinocrownophanes exhibiting perfect extractability toward Ag ion

Novel crownophanes with two bipyridine moieties (bipyridinocrownophanes 1a and 1b) were conveniently prepared by means of intramolecular [2+2] photocycloaddition of vinylbipyridine derivatives. In the liquid-liquid extraction of heavy metal cations, 1a and 1b exhibited perfect selectivity toward Ag⁺ with high efficiency. It was found that the ethereal oxygen atoms and the four nitrogen atoms in 1a and 1b acted as ligating sites, according to the high extractability and complexing stability constant for Ag⁺ compared to those of the corresponding pyridinocrownophanes 4a and 4b. ¹H NMR and ESI-MS analyses suggested that the crownophanes formed a 1:1 complexes with the Ag⁺ ion.     

Fluorescence emission control and switching of oxymethylcrowned spirobenzopyrans by metal ion

Oxymethylcrowned spirobenzopyran 1 and pyrenylspirobenzopyran 2 were synthesized, and fluorescence emission of their corresponding merocyanine form was examined in the presence of metal ions. For 2, fluorescence emission derived from the pyrene moiety was completely quenched by photoinduced electron transfer (PET) of the nitrogen atom when the merocyanine form was not produced, namely, without metal ions. However, when 2 was converted to the merocyanine form by the complexation of its crown ether with a metal ion, fluorescence resonance energy transfer (FRET) from the pyrene to the merocyanine moieties took place to produce fluorescence emission. This result demonstrates that the spirobenzopyran isomerization can function as a fluorescence emission switch. Fluorescence quantum yield measurement for 1 and 2 showed that fluorescence emission depends on the binding metal ion in which the fluorescence quantum yield generally increased with the increase of metal ion radius.     

Synthesis of crownophanes possessing three pyridine rings

Novel crownophanes with three pyridine moieties (pyridinocrownophanes 4 and 5) were prepared by means of intramolecular [2+2] photocycloaddition of vinylpyridine derivatives. In the liquid-liquid extraction of heavy metal cations, 4 and 5 exhibited high efficiency toward Ag⁺. Comparing the high extractability and complexing stability constant for Ag⁺ to those of the corresponding pyridinocrownophanes 2 and 3 and observing the ¹H NMR spectra in the presence of Ag⁺, the ethereal oxygen atoms and the three nitrogen atoms were found efficiently and cooperatively to act as ligating sites.     

Syntheses and extraction properties of novel biscalixarene and thiacalix[4]arene hydrazone derivatives

By reacting thiacalix[4]arene with p-tosyloxyethoxylbenzaldehyde 1, 3-bis(benzaldehyde-4-oxyethyloxy)-p-tert-butylthiacalix[4]arene (2) were prepared in yield of 65%. Refluxing compound 2 with aniline, salicylic hydrazide, nicotinic hydrazide and isonicotinic hydrazide, novel ringopening 1,3-bis-arylformyl-hydrazone substituted thiacalix[4]arene derivatives (3a–3d) were obtained in yields of 77–89%. Refluxing compound 2 with o-phenylendiamine, oxalyl dihydrazide, malonic dihydrazide and adipic dihydrazide in “1 + 1” intermolecular condensation mode under diluted condition, novel 1,3-bis-acyl hydrazone-bridged calix[4]arene derivatives (4a–4d) were prepared in good yields. Moreover, by condensating compound 2 with 1,3-bis(hydrazinocarbonyl-methoxy)-p-tert-butylcalix[4]arene (5), the first example of hydrazone-bridged biscalixarene (6) with calix[4]arene and thiacalix[4]arene subunits was facilely synthesized in yield of 90%. The noncompetitive and competitive extracting experiments showed that these novel hosts were good receptors for both metal cations and α-amino acids. Compounds 3a–3d and 4a–4d showed similar binding properties with high extraction percentage but low extracting selectivities. Biscalixarene 6 exhibited not only high extracting abilities but also good extracting selectivities.     

Synthesis,characterization and metal ion complexation and extraction capabilities of calix[4]arene Schiff base compounds

The syntheses, characterization and metal ion complexation and extraction capabilities of six new calix[4]arene Schiff base compounds, 5–10, are reported. The preparation of the compounds was achieved by the condensation of 5,17-diamino-11,23-di-tert-butyl-25,27-di-n-butoxy-26,28-dihydroxycalix[4]arene with the appropriate aldehyde (5-bromosalicylaldehyde for 5, 4-anisaldehyde for 6, 4-(dimethylamino)benzaldehyde for 7, 9-anthracenecarboxaldehyde for 8, 1-pyrenecarboxaldehyde for 9, and 9-fluorenecarboxaldehyde for 10) in refluxing ethanol. The compounds were characterized by ¹H and ¹³C NMR spectroscopy, IR spectroscopy, high-resolution mass spectrometry and elemental analysis. The X-ray crystal structures of 7, 8 and 9 (as dichloromethane solvates) revealed that the calixarene molecules adopt H-bond stabilized, distorted-cone conformations and form centrosymmetric dimers in the solid state. Compounds 5–10 did not form host–guest complexes with NEt₄[(bdt)MoO₂(OSiPh₃)] (bdt^2–=benzene-1,2-dithiolate), a potential precursor for biologically relevant oxosulfido-Mo(VI/V) enzyme models; such host–guest complexes have the potential to stabilize these sought-after but highly reactive model compounds. In addition, the capabilities of 5–10 to extract selected metal ions (Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺, Ag⁺, Pb²⁺, Cd²⁺ and Hg²⁺) from an aqueous into an organic phase have been assessed by picrate extraction experiments. Compound 5 displayed exceptional selectivity towards Ni²⁺, compound 7 exhibited enhanced extraction towards all of the metal ions tested and compounds 6, 9 and 10 showed very high selectivity towards Hg²⁺. On the other hand, compound 8 exhibited negligible capacity to extract any of the metal ions tested.     

Bifunctional fluorescent thiacalix[4]arene based chemosensor for Cu and F ions

A new thiacalix[4]arene based fluorescent sensor bearing two dansyl groups has been synthesized in cone conformation. In CH₃CN:CH₂Cl₂ (1:1), the presence of Cu (II) induces the formation of a 1:1 metal:ligand complex, which exhibits increasing emission at 433 nm at the expense of the fluorescent emission of 1 centered at 504 nm. The detection limit of the sensor for Cu²⁺ is 2×10⁻⁷ mol L⁻¹. For anion sensing, 1 shows a high selectivity for fluoride ions over other anions tested.     

Synthesis and characterization of novel indole-containing half-crowns as new emissive metal probes

Two new indole derivatives have been synthesized by a one-pot procedure and their potential as fluorescence probes for metal ions was investigated. The sensor capability of 1 and 2 toward cations such as Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁻ was studied in dichloromethane solution by absorption, fluorescence emission, and ¹H NMR titrations. Both probes showed selectivity for Ag⁺ and Hg²⁺ ions. The results suggest that these compounds may serve as promising models for future design of novel and more potent sensors.