Methylene-bridged bis(8-arylimino)-5,6,7-trihydro-quinolylinickel precatalysts for ethylene polymerization

A series of binuclear nickel complexes bearing N-(5,6,7-trihydroquinolin-8-ylidene)amino CH(C₆H₄-4-R²){4-C₆H₂-2,6-R¹₂N-(C₅H₃NC₄H₆)}₂ [R¹ = Me, R² = OH L1 , R¹ = Et, R² = OH L2 , R¹ = Me, R² = H L3 , R¹ = Me, R² = OCH₃ L4 ] has been synthesized and characterized. In the presence of either methylaluminoxane (MAO) or Et₂AlCl, all nickel complexes exhibited high activities up to 3.33 × 10⁶ g (PE)·mol⁻¹(Ni)·hr⁻¹ toward ethylene polymerization, producing high branched polyethylenes (PEs). The aluminum cocatalysts have significantly affected the properties of resultant PE; with MAO as the cocatalyst, the resultant PE shows higher molecular weight and possesses only one T_m value, meanwhile Et₂AlCl as the cocatalyst, the obtained PE indicates lower molecular weight and two melting points. The microstructures of those PEs determined by their ¹³C NMR spectra illustrate the similar densities but different types of branches, in which the PE obtained with Et₂AlCl shows high methyl branch selectivity (>80%), and the PE produced by MAO has 50% methyl and another half of longer branches. The branched PEs are consistent to the chain migration happened in the ethylene polymerization.     

Balancing high thermal stability with high activity in diaryliminoacenaphthene‐nickel(II) catalysts for ethylene polymerization

The N,N‐diaryliminoacenaphthenes, 1,2‐[2,4‐{(4‐FC₆H₄)₂CH}₂‐6‐MeC₆H₄N]₂‐C₂C₁₀H₆ ( L1 ) and 1‐[2,4‐{(4‐FC₆H₄)₂CH}₂‐6‐MeC₆H₄N]‐2‐(ArN)C₂C₁₀H₆ (Ar = 2,6‐Me₂C₆H₃ L2 , 2,6‐Et₂C₆H₃ L3 , 2,6‐i‐Pr₂C₆H₃ L4 , 2,4,6‐Me₃C₆H₂ L5 , 2,6‐Et₂‐4‐MeC₆H₂ L6 ), incorporating at least one N ?2,4‐bis(difluoro benzhydryl)‐6‐methylphenyl group, have been synthesized and fully characterized. Interaction of L1 – L6 with (DME)NiBr₂ (DME = 1,2‐dimethoxyethane) generates the corresponding nickel(II) bromide N,N‐chelates, L NiBr₂ ( 1 – 6 ), in high yield. The molecular structures of 3 and 6 reveal distorted tetrahedral geometries at nickel with the ortho‐substituted difluorobenzhydryl group providing enhanced steric protection to only one side of the metal center. On activation with various aluminum alkyl co‐catalysts, such as methylaluminoxane (MAO) or Et₂AlCl, 1 – 6 displayed outstanding activity toward ethylene polymerization (up to 1.02 × 10⁷ g of PE (mol of Ni)^?1 h^?1). Notably 1 , bearing equivalent fluorobenzhydryl‐substituted N‐aryl groups, was able in the presence of Et₂AlCl to couple high activity with exceptional thermal stability generating high molecular weight branched polyethylenes at temperatures as high as 100 °C. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1971–1983     

Alkylaluminum activator effects on polyethylene branching using a N,N′‐nickel precatalyst appended with bulky 4,4′‐dimethoxybenzhydryl groups

Ten unsymmetrical N,N'‐bis (imino) acenaphthene‐nickel (II) halide complexes, [1‐[2,6‐{(4‐MeOC₆H₄)₂CH}₂–4‐MeC₆H₂N]‐2‐(ArN)C₂C₁₀H₆]NiX₂, each appended with one N‐2,6‐bis(4,4'‐dimethoxybenzhydryl)‐4‐methylphenyl group, have been synthesized and characterized. The molecular structures of Ni1 , Ni3 , Ni5 and Ni6 highlight the variation in steric protection afforded by the inequivalent N‐aryl groups; a distorted tetrahedral geometry is conferred about each nickel center. On activation with diethylaluminum chloride (Et₂AlCl) or methylaluminoxane (MAO), all complexes showed high activity at 30°C for the polymerization of ethylene with the least bulky bromide precatalysts ( Ni1 and Ni4 ), generally the most productive, forming polyethylenes with narrow dispersities [M_w/M_n: < 3.4 (Et₂AlCl), < 4.1 (MAO)] and various levels of branching. Significantly, this level of branching can be influenced by the type of co‐catalyst employed, with Et₂AlCl having a predilection towards polymers displaying significantly higher branching contents than with MAO [T_m: 33.0–82.5°C (Et₂AlCl) vs. 117.9–119.4°C (MAO)]. On the other hand, the molecular weights of the materials obtained with each co‐catalyst were high and, in some cases, entering the ultra‐high molecular weight range [M_w range: 6.8–12.2 × 10⁵ g mol^?1 (Et₂AlCl), 7.2–10.9 × 10⁵ g mol^?1 (MAO)]. Furthermore, good tensile strength (ε_b up to 553.5%) and elastic recovery (up to 84%) have been displayed by selected more branched polymers highlighting their elastomeric properties.     

Synthesis,structural characterization,and ethylene polymerization behavior of (arylimido)vanadium(V) complexes bearing tridentate Schiff base ligands

A series of novel (arylimido)vanadium(V) complexes bearing tridentate salicylaldiminato chelating ligands, V(N‐2,6‐Me₂C₆H₃)Cl₂[(O‐2‐^tBu‐4‐R‐C₆H₃)CH?ND] (R = H, D = 2‐CH₃O? C₆H₄ ( 2a ); 2‐CH₃S? C₆H₄ ( 2b ); 2‐Ph₂P? C₆H₄ ( 2c ); 8‐C₉H₆N (quinoline) ( 2d ); CH₂C₅H₄N ( 2e ); R = ^tBu, D = 2‐Ph₂P? C₆H₄ ( 2f )), were prepared from V(NAr)Cl₃ by reacting with 1.0 equiv of the ligands in the presence of triethylamine in tetrahydrofuran. These complexes were characterized by ¹H, ¹³C, ³¹P, and ⁵¹V NMR spectra and elemental analysis. The structures of 2c and 2f were further confirmed by X‐ray crystallographic analysis. These (arylimido)vanadium(V) complexes are effective catalyst precursors for ethylene polymerization in the presence of Et₂AlCl as a cocatalyst and ethyl trichloroacetate as a reactivating agent. Complex 2c with a ? PPh₂ group in the sidearm was found to exhibit an exceptional activity up to 133800 kg polyethylene/mol_V h for ethylene polymerization at 75 °C, which is one of the highest activities displayed by homogeneous vanadium(V) catalysts at high temperature. Moreover, high molecular weight polymers with unimodal molecular weight distribution can be obtained, indicating the single site behavior of these catalysts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2633‐2642     

Molecular weight control of polyethylene waxes using a constrained imino‐cyclopenta[b]pyridyl‐nickel catalyst

Five examples of nickel(II) bromide complexes bearing N,N‐imino‐cyclopenta[b ]pyridines, [7‐(ArN)‐6,6‐Me₂C₈H₅N]NiBr₂ (Ar = 2,6‐Me₂C₆H₃ ( Ni1 ), 2,6‐Et₂C₆H₃ ( Ni2 ), 2,6‐i‐ Pr₂C₆H₃ ( Ni3 ), 2,4,6‐Me₃C₆H₂ ( Ni4 ), 2,6‐Et₂‐4‐MeC₆H₂ ( Ni5 )), have been prepared by the reaction of the corresponding ligand, L1 – L5 , with NiBr₂(DME) (DME = 1,2‐dimethoxyethane). On crystallization from bench dichloromethane, Ni1 underwent adventitious reaction with water to give the aqua salt, [ L1 NiBr(OH₂)₃][Br] ( Ni1' ). The molecular structures of Ni1' and Ni3 have been structurally characterized, the latter revealing a bromide‐bridged dimer. On activation with either MMAO or Et₂AlCl, Ni1 , Ni2 , Ni4, and Ni5 , all exhibited high activities for ethylene polymerization (up to 3.88 × 10⁶ g(PE) mol^?1(Ni) h^?1); the most sterically bulky Ni3 gave only low activity. Polyethylene waxes are a feature of the materials obtained which typically display low molecular weights (M _ws), narrow M _w distributions and unsaturated vinyl and vinylene functionalities. Notably, the catalyst comprising Ni1 /Et₂AlCl produced polyethylene with the lowest M _w, 0.67 kg mol^?1, which is less than any previously reported data for any class of cycloalkyl‐fused pyridine–nickel catalyst. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3494–3505     

Moderately branched ultra‐high molecular weight polyethylene by using N,N′‐nickel catalysts adorned with sterically hindered dibenzocycloheptyl groups

Five examples of unsymmetrical 1,2‐bis (arylimino) acenaphthene ( L1 – L5 ), each containing one N‐2,4‐bis (dibenzocycloheptyl)‐6‐methylphenyl group and one sterically and electronically variable N‐aryl group, have been used to prepare the N,N′‐nickel (II) halide complexes, [1‐[2,4‐{(C₁₅H₁₃}₂–6‐MeC₆H₂N]‐2‐(ArN)C₂C₁₀H₆]NiX₂ (X = Br: Ar = 2,6‐Me₂C₆H₃ Ni1 , 2,6‐Et₂C₆H₃ Ni2 , 2,6‐i‐Pr₂C₆H₃ Ni3 , 2,4,6‐Me₃C₆H₂ Ni4 , 2,6‐Et₂–4‐MeC₆H₂ Ni5 ) and (X = Cl: Ar = 2,6‐Me₂C₆H₃ Ni6 , 2,6‐Et₂C₆H₃ Ni7 , 2,6‐i‐Pr₂C₆H₃ Ni8 , 2,4,6‐Me₃C₆H₂ Ni9 , 2,6‐Et₂–4‐MeC₆H₂ Ni10 ), in high yield. The molecular structures Ni3 and Ni7 highlight the extensive steric protection imparted by the ortho‐dibenzocycloheptyl group and the distorted tetrahedral geometry conferred to the nickel center. On activation with either Et₂AlCl or MAO, Ni1 – Ni10 exhibited very high activities for ethylene polymerization with the least bulky Ni1 the most active (up to 1.06  ×  10⁷ g PE mol^?1(Ni) h^?1 with MAO). Notably, these sterically bulky catalysts have a propensity towards generating very high molecular weight polyethylene with moderate levels of branching and narrow dispersities with the most hindered Ni3 and Ni8 affording ultra‐high molecular weight material (up to 1.5  ×  10⁶ g mol^?1). Indeed, both the activity and molecular weights of the resulting polyethylene are among the highest to be reported for this class of unsymmetrical 1,2‐bis (imino)acenaphthene‐nickel catalyst.     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

Ethylene homopolymerizaton and copolymerizaton by vanadium(III) complexes containing tridentate or tetradentate iminopyrrolyl ligands

Iminopyrrolyl vanadium(III) complexes 2a–b bearing tridentate ligands [C₄H₃NCH?NC₆H₄L]VCl₂(THF) [L = 2‐P(C₆H₅)₂ ( 2a ), 2‐SMe ( 2b )] and complexes 2c–d with tetradentate ligands [(C₄H₃NCH?N)₂R]VCl(THF) [R = 1,2‐C₆H₄ ( 2c ), 1,2‐C₂H₄ ( 2d )] have been synthesized in high yields. With diethylaluminium chloride as a cocatalyst, complexes 2a–d were investigated as efficient catalysts for ethylene polymerization under various reaction conditions, and exhibited high catalytic activity and remarkable thermal stability. With these complexes, high molecular weight polymers with unimodal molecular weight distributions were obtained, indicating that the polymerization reaction took place in a single‐site nature. Ethylene/1‐hexene copolymerizations were also investigated in the presence of Et₂AlCl. Both increasing ligand denticity and introducing softer atom into the sidearm of the ligands significantly influenced catalytic activity, comonomer incorporation, and the molecular weights of the resultant polymers, suggesting that both the steric and the electronic effects of the ligands played an important role in adjusting chain propagation and transfer rate. The chain transfer mechanisms involved in the copolymerization process were investigated by carefully analyzing the microstructure of the copolymers. The signals of vinyl, disubstituted and tri‐substituted vinylene double bond end groups were detected in the copolymer obtained by 2a /Et₂AlCl system but not in those by 2b–c /Et₂AlCl systems, indicating that bulky electron‐donating group, ? P(C₆H₅)₂, may lead to those unusual transfer reactions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Ethylene polymerization and ethylene/hexene copolymerization with vanadium(III) catalysts bearing heteroatom‐containing salicylaldiminato ligands

A series of novel vanadium(III) complexes bearing heteroatom‐containing group‐substituted salicylaldiminato ligands [RN?CH(ArO)]VCl₂(THF)₂ (Ar = C₆H₄, R = C₃H₂NS, 2a ; C₇H₄NS, 2c ; C₇H₅N₂, 2d ; Ar = C₆H₂tBu₂ (2,4), R = C₃H₂NS, 2b ) have been synthesized and characterized. Structure of complex 2c was further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–d exhibited high catalytic activities (up to 22.8 kg polyethylene/mmol_V h bar), and affording polymer with unimodal molecular weight distributions at 25–70 °C in the first 5‐min polymerization, whereas produced bimodal molecular weight distribution polymers at 70 °C when polymerization time prolonged to 30 min. The catalyst structure plays an important role in controlling the molecular weight and molecular weight distribution of the resultant polymers produced in 30 min polymerization. In addition, ethylene/hexene copolymerizations with catalysts 2a–d were also explored in the presence of Et₂AlCl, which leads to the high molecular weight and unimodal distributions copolymers with high comonomer incorporation. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled over a wide range by the variation of catalyst structure and the reaction parameters, such as comonomer feed concentration, polymerization time, and polymerization reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3573–3582, 2009     

Co‐catalyst effects on the thermal stability/activity of N,N,N‐Co ethylene polymerization Catalysts Bearing Fluoro‐Substituted N‐2,6‐dibenzhydrylphenyl groups

The unsymmetrical bis (arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐t‐BuC₆H₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N‐aryl group bedecked with ortho‐substituted fluorobenzhydryl groups, have been employed in the preparation of the corresponding five‐coordinate cobalt (II) chelates, LCoCl₂ ( Co1 – Co5 ); the symmetrical comparator [2,6‐{CMeN(2,6‐(4‐FC₆H₄)₂CH)₂–4‐t‐BuC₆H₂}₂C₅H₃N]CoCl₂ (Co6) is also reported. All cobaltous complexes are paramagnetic and have been characterized by ¹H/¹⁹F NMR spectroscopy, FT‐IR spectroscopy and elemental analysis. The molecular structures of Co3 and Co6 highlight the different degrees of steric protection given to the metal center by the particular N‐aryl group combination. Depending on the aluminoxane co‐catalyst employed to activate the cobalt precatalyst, distinct variations in thermal stability and activity of the catalyst towards ethylene polymerization were exhibited. In particular with MAO, the resultant catalysts reached their optimal performance at 70 °C delivering high activities of up to 10.1 × 10⁶ g PE (mol of Co)^?1 h^?1 with Co1  >  Co4  >  Co2  >  Co5  >  Co3 >>  Co6 . On the other hand, using MMAO, the catalysts operate most effectively at 30 °C but are by comparison less productive. In general, the polyethylenes were highly linear, narrowly disperse and displayed a wide range of molecular weights [M_w range: 18.5–58.7 kg mol^?1 (MAO); 206.1–352.5 kg mol^?1 (MMAO)].     

Effect of para-Substituents in Ethylene Copolymerizations with 1-Decene, 1-Dodecene,and with 2-Methyl-1-Pentene Using Phenoxide Modified Half-Titanocenes-MAO Catalyst Systems

Effect of para-substituents in the ethylene (E) copolymerization with 1-decene (DC), 1-dodecene (DD), and with 2-methyl-1-pentene (2M1P) using a series of Cp*TiCl₂(O-2,6-ⁱPr₂-4-R-C₆H₂) [R=H ( 1 ), ^tBu ( 2 ), Ph ( 3 ), CHPh₂ ( 4 ), CPh₃ ( 5 ), SiMe₃ ( 6 ), SiEt₃ ( 7 ), and newly prepared 4-^tBuC₆H₄ ( 8 ) and 3,5-Me₂C₆H₃ ( 9 )]-MAO catalyst systems has been studied. The activities in these copolymerization reactions were affected by the para-substituent, and the SiMe₃ ( 6 ), SiEt₃ ( 7 ) and 3,5-Me₂C₆H₃ ( 9 ) analogues showed the higher activities at 50 °C in the E copolymerization reactions with DC (1.06–1.44×10⁶ kg-polymer/mol-Ti⋅h), DD (1.04–1.88×10⁶ kg-polymer/mol-Ti⋅h) than the others, whereas no significant differences were observed in the comonomer incorporations. Complexes 6 and 7 also showed the higher activities at 50 °C in the E/2M1P copolymerization, and the 2M1P incorporation was affected by the para-substituent and the polymerization temperature; complex 9 showed better 2M1P incorporation at 25 °C.     

Aluminiumorganyle mit pentakoordiniertem Aluminium-Atom: Synthese und Molekülstrukturen von [AlX2{2,6-(NEt2CH2)2C6H3}] (X = Cl,Et, H)

Aluminium Organyls with Pentacoordinate Aluminium: Syntheses and Molecular Structures of [AlX₂{2,6-(NEt₂CH₂)₂C₆H₃}] (X = Cl, Et, H) The reaction of [Li{2,6-(NEt₂CH₂)₂C₆H₃}]₂ with AlCl₃ or Et₂AlCl gives [AlX₂{2,6-(NEt₂CH₂)₂C₆H₃}] [X = Cl ( 1 ), Et ( 2 )] in good yield. 1 reacts with NaH in toluene to give [AlH₂{2,6-(NEt₂CH₂)₂C₆H₃}] ( 3 ). 1–3 were characterised spectroscopically (¹H, ¹³C, ²⁷Al n.m.r., i.r., mass spectroscopy). In solution at room temperature 1–3 exhibit dynamic behaviour. For 1 and 3 this can be frozen out below 278 K (¹H n.m.r.), indicating the presence of monomeric molecules with pentacoordinate Al at low temperature. Such species are also observed in the solid state as shown by an X-ray structure determination on 1 (monoclinic space group P2₁/n, a = 9.7325(14), b = 13.552(5), c = 28.858(7) Å, β = 99.57(2)°, V = 3753(2) ų, Z = 8, at 223(2) K) and 2 (monoclinic space group C2/c, a = 15.0045(12), b = 9.2986(8), c = 14.9955(12) Å, β =99.512(1)°, Z = 4, at 223(2) K).     

Bis(β‐enaminoketonato) vanadium (III or IV) complexes as catalysts for olefin polymerization

Bis(β‐enaminoketonato) vanadium(III) complexes ( 2a–c ) [O(R₁)C?C(H)_xC(R₂)?NC₆H₅]₂VCl(THF) and the corresponding vanadium(IV) complexes ( 3a–c ) [O(R₁)C?C(H)_xC(R₂)? NC₆H₅]₂VO (R₁ = ? (CH₂)₄? , R₂ = H, x = 0, a ; R₁ = ? C₆H₅, R₂ = H, x = 1, b ; R₁ = ? C₆H₅, R₂ = ? C₆H₅, x = 1, c ) have been synthesized from VCl₃(THF)₃ and VOCl₂(THF)₂, respectively, by treating with 2.0 equivalent β‐enaminoketonato ligands in tetrahydrofuran. Structures of 2b and 3a–c were further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–c and 3a–c exhibited high catalytic activities (up to 23.76 kg of PE/mmol_V h bar), and afforded polymers with unimodal molecular weight distributions at 70 °C indicating the good thermal stability. The catalytic behaviors were influenced not only by the oxidation state of the catalyst precursors but also by the ligand structures. Complexes 2a–c and 3a–c were also effective catalyst precursors for ethylene/1‐hexene copolymerization. The influence of polymerization parameters such as reaction temperature, Al/V molar ratio and hexene feed concentration on the ethylene/hexene copolymerization behaviors have bee also investigated in detail. In addition, the agents such as AlMe₃, AlⁱBu₃, MeMgBr, MgCl₂, and ZnEt₂ were applied to control the molecular weight and molecular weight distribution modal. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3062–3072, 2010     

Synthesis,structural characterization,and olefin polymerization behavior of vanadium(III) complexes bearing bidentate phenoxy‐phosphine ligands

Vanadium(III) complexes bearing phenoxy‐phosphine ligands ( 2a–g ) (2‐R₁‐4‐R₂‐6‐PPh₂‐C₆H₂O)VCl₂(THF)₂ ( 2a : R₁ = R₂ = H; 2b : R₁ = F, R₂ = H; 2c : R₁ = Ph, R₂ = H; 2d : R₁ = tBu, R₂ = H; 2e : R₁ = R₂ = Me; 2f : R₁ = R₂ = tBu; 2g : R₁ = R₂ = CMe₂Ph) were prepared from VCl₃(THF)₃ by treating with 1.0 equiv of the ligand in tetrahydrofuran (THF) in the presence of excess triethylamine (TEA). The reaction of VCl₃(THF)₃ with 2.0 equiv of the ligand in THF in the presence of excess TEA afforded vanadium(III) complexes bearing two phenoxy‐phosphine ligands ( 3c–f ). These complexes were characterized by FTIR and mass spectrum as well as elemental analyses. Structures of 2f and 3c were further confirmed by X‐ray crystallographic analyses. Complexes 2a–g and 3c–f were employed as the catalysts for ethylene polymerization under various reaction conditions. On activation with Et₂AlCl, these complexes exhibited high catalytic activities (up to 41.3 kg PE/mmol_V·h·bar) even at high temperature (70°C), and produced high molecular weight polymer with unimodal molecular weight distributions, indicating the polymerization took place in a single‐site nature. Complexes 3c–f displayed better thermal stability than the corresponding complexes 2a–g under similar conditions. In addition, copolymerizations of ethylene and 1‐hexene with precatalysts 2a–g were also explored in the presence of Et₂AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930     

Producing highly linear polyethylenes by using t‐butyl‐functionalized 2,6‐bis(imino)pyridylchromium(III) chlorides

A new family of t‐butyl substituted chromium(III) chloride complexes ( Cr1 – Cr6 ), bearing 2‐(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridine (aryl = 2,6‐Me₂C₆H₃ Cr1 , 2,6‐Et₂C₆H₃ Cr2 , 2,6‐i‐Pr₂C₆H₃ Cr3 , 2,4,6‐Me₃C₆H₂ Cr4 and 2,6‐Et₂‐4‐MeC₆H₂ Cr5 ) or 2,6‐bis(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)pyridine ( Cr6 ), has been synthesized by the reaction of CrCl₃·6H₂O in good yield with the corresponding ligands ( L1 – L6 ), respectively. The molecular structures of Cr2 and Cr6 were characterized by X‐ray diffraction highlighted a distorted octahedral geometry with the coordinated N,N,N ligand and three bonded chlorides around the metal center. On activation with modified methylaluminoxane or triisobutyl aluminum, most of the chromium precatalysts exhibit good activities toward ethylene polymerization and produce linear polyethylenes with high‐molecular weight. In addition, an in‐depth catalytic evaluation of Cr2 was conducted to investigate how cocatalyst type and amount, reaction temperature, and run time affect the catalytic activities and polymer properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1049–1058     

Optical‐limiting and nonlinear optical polyacetylenes: Synthesis of azobenzene‐containing poly(1‐alkyne)s with different spacer and tail lengths

Poly(1‐alkyne)s containing azobenzene pendant groups with different lengths of the spacer and terminal alkyloxy group {? [HC?C(CH₂)_mOCO? C₆H₄? N?N? C₆H₄? OC_pH_2p+1]_n? , where m = 1, 2, 3, or 9 and p = 4, 7, or 12} were synthesized in satisfactory yields with the [Rh(nbd)Cl]₂–Et₃N catalyst. All the polymers were soluble in common organic solvents such as CHCl₃ and tetrahydrofuran. Their structures and properties were characterized and evaluated with IR, NMR, thermogravimetric analysis, UV, and optical‐limiting and nonlinear optical analyses. All the polymers were thermally stable and decomposed at temperatures as high as ～300 °C. The optical‐limiting and nonlinear optical properties of the polymers were sensitive to their molecular structures. Polymers having shorter spacer lengths and longer terminal groups showed better performances and larger third‐order nonlinear optical susceptibility (up to 1.34 × 10^?10 esu). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2346–2357, 2006     

Die Kristallstruktur von Diethylaluminiumhypersilanid, [(C2H5)2Al–Si{Si(CH3)3}3]2

The Crystal Structure of Diethylaluminium Hypersilanide [(C₂H₅)₂Al–Si{Si(CH₃)₃}₃]₂ [Et₂Al–Hsi]₂ (Et = C₂H₅, Hsi = –Si(SiMe₃)₃), prepared from [Et₂AlCl]₂ and equimolar amounts of base‐free Li–Hsi in n‐pentane, crystallizes in the triclinic space group P 1 with two independent dimers per unit cell. One of these molecules is disordered. The dimers consist of planar Al₂C₂‐skeletons with Al–C–Al bridging bonds of 212,9(2) and 221,2(2) pm, respectively, and with intramolecular C–H…Al contacts of 202(2) pm.