SERS标记的金纳米棒探针用于免疫检测

报道了基于金纳米棒表面增强拉曼散射(SERS)的免疫检测. 将拉曼活性分子对巯基苯甲酸吸附于金纳米棒表面, 制备出SERS标记的金纳米棒探针. 该探针和蛋白抗体结合形成SERS标记抗体. 通过SERS标记抗体、待测抗原和俘获抗体(固体基底上修饰的抗体, 即俘获抗体)之间的免疫应答反应, 将金纳米棒探针组装到固体基底上, 形成SERS标记抗体-抗原-俘获抗体 “三明治”夹心复合体. 待测抗原浓度越大, 固体基底上俘获的金纳米棒探针的数目越多, 从而可通过SERS信号的强弱来检测待测抗原的浓度. 由于金纳米棒的表面等离子体共振(SPR)峰位置可以在较宽的范围内调控, 可通过激发光和SPR的耦合来提高SERS信号, 从而提高免疫检测的灵敏度. 单组分抗原可检出的浓度范围高于1×10－8 mg/mL.     

一种新型表面增强拉曼活性基底的制备方法

表面增强拉曼光谱技术 (SERS)具有极高的灵敏度 ,对某些分子其灵敏度比常规拉曼光谱高一百万倍 ,能检测吸附在金属表面的单分子层和亚单分子层的分子 ,并提供丰富的分子结构信息 [1～ 5] .活性基底的制备是获得 SERS信号的前提 ,电化学粗糙化的电极、贵金属溶胶及真空蒸镀的金属岛膜是SERS分析中最常用的 3种活性基底 ,在实际应用中各有利弊 .本文报道一种新的制备银纳米粒子基底的方法 ,可使银纳米粒子生长到合适的尺寸 ,以达到最佳SERS增强效果 .利用紫外 -可见光谱和 AFM研究该 SERS基底纳米粒子的尺寸分布和形貌 ,以 1 ,4-(双…     

基于贵金属纳米粒子的SERS活性基底研究进展

表面增强拉曼光谱(SERS)是一种新兴的分析技术,具有很高的检测灵敏度,可以实现单分子量级的检测,并且能够提供丰富的分子结构信息。将SERS发展成为一种具有实际应用意义的分析技术,其关键是制备灵敏度高、稳定性高、重现性好、选择性高的SERS活性基底。对贵金属纳米粒子表面进行分子修饰,或者将贵金属纳米粒子与基质材料进行复合,可以组成融合贵金属纳米粒子的SERS活性并弥补其缺陷的新型SERS基底材料。本文综述了近年来基于贵金属纳米粒子常见的分子修饰和基质复合型SERS活性基底的研究进展。     

覆银聚酰亚胺纳米棒阵列的制备及其SERS特性

通过在聚酰亚胺(PI)膜表面进行氧等离子体刻蚀得到纳米棒阵列,并溅射Ag膜形成了覆银聚酰亚胺纳米棒阵列。利用该方法能够简单快捷地制备出具有较强活性且结构可调的表面增强拉曼散射(SERS)衬底。通过改变氧等离子体刻蚀时间和溅射Ag膜厚度可以调节覆银PI纳米棒的间隙、密度和直径。通过对探针分子尼罗兰(NB)测试表征了覆银PI纳米棒衬底的SERS增强能力。通过改变氧等离子体刻蚀时间和Ag膜溅射厚度实现了衬底SERS增强能力的调节。在氧等离子体刻蚀时间为30 s和溅射Ag膜厚度为70 nm时,衬底的SERS增强能力达到最强,并且其拉曼信号展现出较好的一致性。     

银纳米微球和银纳米棒自组装膜的制备及SERS研究

采用硼氢化钠还原硝酸银,用振荡器在不同转速下振荡得到单分散的银纳米微球和银纳米棒,再将银纳米微球及银纳米棒自组装于被3-氨丙基-三甲氧基硅烷(APTMS)修饰的玻璃基片上,制得了具有表面增强拉曼(SERS)活性的基底,分别以罗丹明6G(R6G)和罗丹明B(RB)为探针分子对这两种基底进行SERS活性检测,结果发现这两种基底均为较理想的SERS衬底。     

金纳米粒子修饰的氨基硅胶整体柱的制备及超灵敏表面增强拉曼散射检测

采用溶胶-凝胶法结合超分子模板技术, 以四乙氧基硅烷(TEOS)和3-氨丙基三乙氧基硅烷(APTES)作为反应前体, 以十六烷基三甲基溴化铵(CTMAB)为超分子模板, 简单快速地制备了一种新型氨基硅胶整体柱, 通过氨基将金纳米粒子组装在整体柱材料孔表面并用于表面增强拉曼散射(SERS)光谱分析. 以对巯基苯胺(PATP)和结晶紫(CV)为拉曼探针, 考察了金纳米粒子修饰的氨基硅胶整体柱用作SERS活性基底的性能. 结果表明, 该整体柱基底具有良好的SERS增强效应, 可检测到的PATP和CV的最低浓度分别为10^-9和10^-11 mol/L. 与金溶胶SERS基底相比, 本文制备的整体柱基底的检测灵敏度显著提高, 并具有良好的信号均一性, 是一种具有现场痕量检测应用潜力的SERS活性基底.     

帽状银纳米粒子的制备及表面增强拉曼活性研究

采用真空热蒸发法在自组装的单层阵列二氧化硅纳米粒子表面沉积银膜制备了帽状银纳米粒子。通过透射电镜(TEM)、扫描电镜(SEM)和紫外-可见-近红外分光光度计 (UV-Vis-NIR)对其表面形貌及光学性质进行了表征。以吡啶-(2-偶氮-4)间苯二酚作为探针分子，研究了该复合纳米粒子的表面增强拉曼散射 (SERS) 活性，增强因子高达2.88×10⁶。结果表明在二氧化硅纳米粒子表面制备的帽状银纳米粒子是很好的表面增强拉曼散射活性基底。     

金纳米棒:合成、修饰、自组装、SERS及生物医学应用

纳米颗粒作为信号感应单元在化学与生物传感应用中已引起广泛关注,这些功能和金属纳米结构与光相互作用时产生的表面等离子体共振密切相关.表面增强拉曼散射(SERS),是指吸附在粗糙的金属纳米结构表面的被分析物,在光照射下其拉曼光谱获得显著增强的异常表面光学现象,近年来.SERS技术已广泛用于物质检测和生物传感等研究,在生物医学领域表现出巨大的应用潜力并取得了令人瞩目的研究成果.本文阐述了金纳米棒的制备方法、表面修饰和共轭生物分子的方法.并从金纳米棒表面增强拉曼散射的角度系统阐述基于金纳米棒表面增强拉曼散射的1D,2D,3D自组装,并介绍了近期金纳米棒表面增强拉曼散射在生物医学检测与成像中最具有代表性的应用研究.     

金纳米棒负载的静电纺丝纤维的制备及其表面增强拉曼光谱性能

为简单有效地制备高活性表面增强拉曼光谱(Surface-enhanced Raman Spectroscopy,SERS)基底。本文采用静电纺丝聚乙烯醇(PVA)/聚丙烯酸(PAA)纳米纤维为支撑材料,通过直接浸泡的方法,利用金纳米棒与电纺纤维之间的静电力,使纳米棒在纤维表面自组装,得到了性能优异的SERS基底。通过透射电子显微镜、扫描电子显微镜对金纳米棒以及不同状态下的电纺纤维的形貌进行表征,结果表明,金纳米棒均匀且密集地负载在纤维表面。通过设置不同的浸泡时间确定了金纳米棒组装平衡的时间为12 h,并通过调控纺丝时间和金纳米棒的浓度发现随着纺丝时间和金纳米棒浓度的增加,复合纤维膜SERS增强效果随之提升。该复合纤维膜具有优异的SERS均匀性,并且能够检测到浓度低至10~(-10)mol/L的4-氨基苯硫酚的存在。     

静电纺纳米复合纤维柔性表面增强拉曼散射传感基底的研究进展

表面增强拉曼散射(Surface enhanced Raman scattering,SERS)是一种分子检测光谱技术,借助SERS基底,可对生物、化学等复杂体系中的痕量分子进行分析。 其中静电纺纳米纤维SERS基底由于具有高比表面积、可透气透水、柔韧可折叠弯曲等特点,在复杂体系中提取、过滤、浓缩痕量分子等应用场景中,其表面结构具有其他刚性SERS基底不可比拟的优势。然而,静电纺纳米纤维SERS基底的发展却受到制备方法的限制,存在检测灵敏度较低、制备过程复杂等问题。 因此,目前的研究工作主要集中在新型制备方法及工艺的开发。 本文综述了静电纺纳米金银复合纤维SERS基底的几种常用制备方法,包括直接混合纺丝法、化学吸附法、静电吸附法、物理沉积法和原位化学还原法,并总结了静电纺纳米纤维SERS基底在复杂体系中提取、过滤、浓缩待测分子的应用,最后对静电纺纳米复合纤维SERS基底的发展进行了展望。     

Visible‐light‐driven self‐cleaning SERS substrate of silver nanoparticles and graphene oxide decorated nitrogen‐doped titania nanotube array

Graphene oxide (GO) and silver nanoparticles (Ag NPs) sequentially decorated nitrogen‐doped titania nanotube array (N‐TiO₂ NTA) had been designed as visible‐light‐driven self‐cleaning surface‐enhanced Raman scattering (SERS) substrate for a recyclable SERS detection application. N‐TiO₂ NTA was fabricated by anodic oxidation and then doping nitrogen treatment in ammonia atmosphere, acting as a visible‐light‐driven photocatalyst and supporting substrate. Ag/GO/N‐TiO₂ NTA was prepared by decorating GO monolayer through an impregnation process and then depositing Ag NPs through a polyol process on the surface of N‐TiO₂ NTA, acting as the collection of organic molecule and Raman enhancement. The SERS activity of Ag/GO/N‐TiO₂ NTA was evaluated using methyl blue as an organic probe molecule, revealing the analytical enhancement factor of 4.54 × 10⁴. Ag/GO/N‐TiO₂ NTA was applied as active SERS substrate to determine a low‐affinity organic pollutant of bisphenol A, revealing the detection limit of as low as 5 × 10^?7 m . Ag/GO/N‐TiO₂ NTA could also achieve self‐cleaning function for a recycling utilization through visible‐light‐driven photocatalytic degradation of the adsorbed organic molecules. Ag/GO/N‐TiO₂ NTA has been successfully reused for five times without an obvious decay in accuracy and sensitivity for organic molecule detection. The unique properties of this SERS substrate enable it to have a promising application for the sensitive and recyclable SERS detection of low‐affinity organic molecules. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface-enhanced Raman scattering of 4-aminobenzenethiol on silver nanoparticles substrate

Active surface-enhanced Raman scattering (SERS) silver nanoparticles substrate was prepared by multiple depositions of Ag nanoparticles on glass slides. The substrate is based on five depositions of Ag nanoparticles on 3-aminopropyl-trimetoxisilane (APTMS) modified glass slides, using APTMS sol–gel as linker molecules between silver layers. The SERS performance of the substrate was investigated using 4-aminobenzenethiol (4-ABT) as Raman probe molecule. The spectral analyses reveal a 4-ABT Raman signal enhancement of band intensities, which allow the detection of this compound in different solutions. The average SERS intensity decreases significantly in 4-ABT diluted solutions (from 10⁻⁴ to 10⁻⁶ mol L⁻¹), but the compound may still be detected with high signal/noise ratio. The obtained results demonstrate that the Ag nanoparticles sensor has a great potential as SERS substrate.     

Silver nanocubes monolayers as a SERS substrate for quantitative analysis

Surface-enhanced Raman scattering (SERS) is a powerful spectroscopic tool in quantitative analysis of molecules, where the substrate plays a critical role in determining the detection performance. Herein, a silver nanocubes/polyelectrolyte/gold film sandwich structure was prepared as a reproducible, high-performance SERS substrate by the water/oil interfacial assembly method. In addition to the hot spots on the nanocubes surface, the edge-to-edge interspace of the Ag nanocubes led to marked enhancement of the SERS intensity, with a limit of detection of 10^?11 mol/L and limit of quantitation of 10^?10 mol/L for crystal violet. When rhodamine 6G and crystal violet were co-adsorbed on the Ag nanocube surfaces, the characteristic SERS peaks of the two molecules remained well resolved and separated, and the peak intensities varied with the respective concentration, which could be exploited for concurrent detection of dual molecules. Results from this work indicate that organized ensembles of Ag nanocubes can serve as effective SERS substrate can for sensitive analysis for complex molecular systems.     

帽状铜纳米粒子的制备及表面增强拉曼散射活性研究

采用真空热蒸发法在SiO₂纳米粒子自组装单层膜上沉积铜薄膜制备了帽状铜纳米粒子。用扫描电镜、原子力显微镜和紫外-可见-近红外分光光度计对帽状复合纳米粒子的表面形貌和光学性质进行了表征。以亚甲基蓝和吡啶-(2-偶氮-4)间苯二酚为探针分子,研究了该复合纳米粒子的表面增强拉曼散射(SERS)活性。通过比较吸附在不同基底上的吡啶-(2-偶氮-4)间苯二酚的谱峰强度,探讨了SERS效应与表面等离子体共振(SPR)的关系。     

ZnGa2O4 Nanorod Arrays Decorated with Ag Nanoparticles as Surface‐Enhanced Raman‐Scattering Substrates for Melamine Detection

The availability of sensitive, reproducible, and stable substrates is critically important for surface‐enhanced Raman spectroscopy (SERS)‐based applications, but it presently remains a challenge. In this work, well‐aligned zinc gallate (ZnGa₂O₄) nanorod arrays grown on a Si substrate by chemical vapor deposition were used as templates to fabricate SERS substrates by deposition of Ag nanoparticles onto the ZnGa₂O₄ nanorod surfaces. The coverage of the Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces was easily controlled by varying the amount of AgNO₃. SERS measurements showed that the number density of Ag nanoparticles on the ZnGa₂O₄ nanorod surfaces had a great effect on SERS activity. The SERS signals collected by point‐to‐point and SERS mapping images showed that as‐prepared SERS substrates exhibited good spatial uniformity and reproducibility. Detection of melamine molecules at low concentrations (1.0×10^?7 M ) was used as an example to show the possible application of such a substrate. In addition, the effect of benzoic acid on the detection of melamine was also investigated. It was found that the SERS signal intensity of melamine decreased greatly as the concentration of benzoic acid was increased.     

3D aluminum/silver hierarchical nanostructure with large areas of dense hot spots for surface‐enhanced raman scattering

Plasmonic nanomaterials possessing large‐volume, high‐density hot spots with high field enhancement are highly desirable for ultrasensitive surface‐enhanced Raman scattering (SERS) sensing. However, many as‐prepared plasmonic nanomaterials are limited in available dense hot spots and in sample size, which greatly hinder their wide applications in SERS devices. Here, we develop a two‐step physical deposition protocol and successfully fabricate 3D hierarchical nanostructures with highly dense hot spots across a large scale (6 × 6 cm²). The nanopatterned aluminum film was first prepared by thermal evaporation process, which can provide 3D quasi‐periodic cloud‐like nanostructure arrays suitable for noble metal deposition; then a large number of silver nanoparticles with controllable shape and size were decorated onto the alumina layer surfaces by laser molecular beam epitaxy, which can realize large‐area accessible dense hot spots. The optimized 3D‐structured SERS substrate exhibits high‐quality detection performance with excellent reproducibility (13.1 and 17.1%), whose LOD of rhodamine 6G molecules was 10^?9 M. Furthermore, the as‐prepared 3D aluminum/silver SERS substrate was applied in detection of melamine with the concentration down to 10^?7 M and direct detection of melamine in infant formula solution with the concentration as low 10 mg/L. Such method to realize large‐area hierarchical nanostructures can greatly simplify the fabrication procedure for 3D SERS platforms, and should be of technological significance in mass production of SERS‐based sensors.     

介孔SiO2薄膜增敏SERS基底在消逝波激励下的特性表征

采用溶胶-凝胶分子模板法在50 nm 厚金膜表面制备约40 nm 厚介孔二氧化硅(MPS)薄膜, 然后在MPS薄膜表面静电自组装金纳米粒子(GNP)单层膜, 形成的多层膜结构用作表面增强拉曼散射(SERS)基底.利用扫描电镜观测到MPS薄膜具有表面开口多孔结构, 有助于小分子向薄膜内快速扩散. 基于时域有限差分(FDTD)方法对电场分布的仿真结果指出, 在表面等离子体共振(SPR)条件下分布于金膜与GNP之间的消逝场显著增强. 由于空间重叠, 该增强场能够高效激发MPS内富集的小分子拉曼信号, 产生的拉曼信号还可免受金属作用的干扰. 利用Kretschmann 结构和尼罗蓝(NB)拉曼活性分子测试了Au/MPS/GNP基底在785 nm激发波长下的SERS效果, 并与Au/GNP基底进行了比较. 结果表明, 在SPR条件下, Au/MPS/GNP基底能够导致较强的定向和背向拉曼信号, 而且在586 cm^-1处的背向拉曼信号强度是Au/GNP基底的40 倍, 这归功于MPS薄膜. 进一步测试表明背向拉曼信号强度与NB浓度成正相关. 这意味着Au/MPS/GNP基底具有良好的半定量检测本领.     

Thin films of ��-Fe2O3 nanoparticles using as nonmetallic SERS-active nanosensors for submicromolar detection

A new kind of nonmetallic nanosensors based on surface-enhanced Raman spectroscopy (SERS) have been successfully prepared by the assembly of α-Fe₂O₃ nanoparticles (NPs) onto clean quartz surface via the cross-linker of hexamethylene diisocyanate (HDI). The resultant substrates have been characterized by electron micrographs, which show that the α-Fe₂O₃ NPs distribute on the modified surface uniformly with a monolayer or sub-monolayer structure. 4-mercaptopyridine (4-Mpy) and 2-mercaptobenzothiazole (2-MBT) molecules have been used as SERS probes to estimate the detection efficiency of the α-Fe₂O₃ thin films. The SERS experiments show that it is possible to record high quality SERS spectra from probe molecules on the α-Fe₂O₃ thin films at sub-micromolar ( < 10⁻⁶ mol/L) concentration. These results indicate that the highly ordered, uniformly roughed, highly sensitive and low-cost α-Fe₂O₃ thin films are excellent candidates for nonmetallic SERS-active nanosensors.     

Silver nanoparticles embedded temperature-sensitive nanofibrous membrane as a smart free-standing SERS substrate

To develop a smart free-standing surface enhanced Raman scattering(SERS) substrate,silver nanoparticles(AgNPs) embedded temperature-sensitive nanofibrous membrane was fabricated by electrospinning their aqueous solution containing the copolymer poly(N-isopropylacrylamide-co-Nhydroxymethylacrylamide),followed by heat treatment to form crosslinking structure within its constituent nanofibers.To avoid negative effect of the additive like stabilizer and the reactant like reductant on their SERS efficiency,the AgNPs were in-situ synthesized through reducing Ag~+ions dissolved in the polymer solution by ultraviolet irradiation.The prepared hybrid nanofibrous membrane with high stability in aqueous medium can reach its swelling or deswelling equilibrium state within 15 seconds with the medium temperature changing between 25℃and 50℃alternately.When it was used as a free-standing SERS substrate,10~(-12) mol/L of 4-nitrothiophenol in aqueous solution can be detected at room temperature,and elevating detection temperature can further lower its low detection limit.Since its generated SERS signal has desirable reproducibility,it can be used as SERS substrate for quantitative analysis.Moreover,the hybrid membrane as SERS substrate is capable of real-time monitoring the reduction of 4-nitrothiophenol into 4-aminothiophenol catalyzed by its embedded AgNPs,and the detected intermediate indicates that the reaction proceeds via a condensation route.     

二步电沉积法制备Au/氧化石墨烯复合薄膜作为SERS基底

采用二步电沉积方法在Ti片表面制备了Au-氧化石墨烯（Au-GO）复合薄膜,通过XRD、SEM、XPS等对薄膜的组成、结构和形貌进行了表征,并以罗丹明6G（R6G）为探针分子,对Au-GO/Ti基底的SERS活性进行了表征。结果显示,Au纳米颗粒尺寸约为60 nm,均匀、致密分布于GO表面,该基底显示出较高的SERS活性,对R6G分子的检测极限可达~10^-10 mol·L^-1,增强因子高达约10⁶,且基底显示出良好的稳定性,在冰箱中存放90 d后,SERS活性仅降低30%左右。