功能梯度与均匀圆板静动态解之间的相似转换关系

基于经典板理论,研究了功能梯度材料圆板的轴对称弯曲、屈曲和自由振动解与相应的均匀材料圆板解之间的转换关系.通过消去拉-弯耦合项得到了以挠度函数表示的功能梯度圆板的弯曲、屈曲和自由振动控制方程.分析功能梯度圆板与均匀圆板的控制方程之间的相似性,得到了功能梯度材料圆板与均匀圆板的解之间解的相似转换关系,在假定FGM圆板的材料性质沿厚分别以幂函数和指数函数的度变规律后,给出了相应的转换系数的解析表达式.该系数集中反映了功能梯度圆板的材料非均匀性.在已知均匀材料圆板轴对称解的条件下,可将功能梯度材料圆板轴对称问题的求解转化为相似转换系数的计算问题.这一方法可为非均匀板的求解提供了十分便捷有效的途径,而且便于工程应用.     

剪切变形对FGM圆板轴对称屈曲的影响

基于一阶剪切变形板理论，推导了功能梯度材料圆形板在边界面内均布压力作用下的轴对称屈曲方程。在推导过程中，忽略了前屈曲耦合变形。利用一阶板理论与经典板理论屈曲方程之间在数学形式上的相似性，得到了一阶板理论下功能梯度材料圆板与经典板理论下均匀圆板临界屈曲载荷之间的解析关系。利用这个解析关系，可以直接从已有的较为简单的经典理论的结果，获得一阶板理论下功能梯度材料板的临界屈曲载荷。     

功能梯度中厚圆/环板轴对称弯曲问题的解析解

基于一阶剪切变形板理论，导出了热/机载荷作用下，位移形式的功能梯度 中厚圆/环板轴对称弯曲问题的控制方程，获得了问题的位移和内力的一般解析解. 作为特 例，分别研究了边缘径向固定和可动的夹紧和简支的4种实心功能梯度圆板，给出了它们的 解，并分析了热/机载荷作用下解的形态，讨论了横向剪切变形、材料梯度常数和边界条件， 对板的轴对称弯曲行为的影响.     

功能梯度梁与均匀梁静动态解间的相似转换

基于Euler-Bernoulli 梁理论, 研究了功能梯度材料梁的弯曲、屈曲和自由振动. 通过分析和比较功能梯度材料梁 和均匀梁的控制方程, 得到了功能梯度材料梁与均匀梁的解之间的相似转换关系. 在给定功 能梯度材料梁的材料性质在横向按幂函数分布的情况下, 导出了解之间的相似转换系数的解 析表达式. 该系数集中反映了功能梯度梁的材料非均匀性. 因此, 可将功能梯度材料梁的静 动态问题的求解转换为同样载荷和边界条件下均匀梁的静动态问题求解以及相似转换系数的 计算.     

轴对称圆薄板大挠度微分方程的数值分析方法

根据轴对称问题的特点,利用级数展开和求极限法则,证明了轴对称大挠度圆薄板在圆心处应满足的边界条件,并以圆薄板轴对称大挠度弯曲变形微分方程为基础,建立了圆心处非奇异的轴对称大挠度圆板弯曲微分方程,从而可以方便地利用现有的常微分方程数值求解方法(如变步长龙格-库塔法)对实心圆板的轴对称问题进行数值求解,又不必像摄动法那样推导复杂的公式。在数值求解轴对称圆板大挠度弯曲变形微分方程时,将非线性微分方程的求解主要归结为迭代求解圆心处三个未知边界条件的问题,即圆心处的径向膜力、圆心处的挠度、圆心处挠度的二阶导数,并提出了相应的求解方法。实例中,对于圆薄板受均布横向荷载的问题,分析了周边固支边界条件下的非线性弯曲问题,给出了中心挠度参数大范围变化时的荷载和部分边界值变化曲线,并与经典摄动解进行了对比。对比结果可见,本文方法和摄动法的解非常接近,在量纲归一化中心挠度不超过4.0时,两种方法解的相对误差均小于5.0%。另外,本文还分析了与挠度有关的液体压力作用下和集中荷载作用下周边固支圆板的非线性弯曲问题。通过算例可见:本文方法可以灵活处理不同的荷载问题;对于不同的问题,计算过程相似,不必推导复杂的计算公式,计算精度容易控制。     

Winkler地基上变厚度圆板的轴对称弯曲

本文提出了Winkler地基上变厚度圆板轴对称弯曲的传递矩阵算法。首先,根据贝塞尔函数理论获得了等厚度圆板和环板单元在任意荷载作用下轴对称弯曲的解析解,这些解均由通解和特解两部分组成。基于这些解析解,导出了等厚度圆板和环板单元的传递矩阵。然后沿径向将变厚度圆板划分成一个等厚度圆板单元和一系列等厚度环板单元,应用传递矩阵算法原理获得了变厚度圆板的整体传递矩阵。引入圆板的边界条件,给出了该板每条节线上的挠度、径向转角、径向弯矩和径向剪力。最后,讨论了受均布荷载作用的简支线性变厚度圆板的弯曲,将本文数值解与解析解进行比较,证实了本文方法的有效性,并简要地讨论了地基参数对板挠度和径向弯矩的影响。     

面内功能梯度矩形板的近似理论与解答

提出了面内功能梯度矩形板在竖向载荷作用下的近似 理论与解析解. 假设材料常数在面内x轴方向按指数规 律变化.引入了板理论的Reissner-Mindlin假设, 并考虑了板中面上的剪切变形的影响.推导了板在平行于y轴的两边简支, 平行于x轴方向的两边简支或固支情况下中性层法线转角和挠度用Fourier级数表示的解.讨论了退化为Kirchhoff假设下经典薄板理论的解的情况.提供了经典薄板理论在和Reissner-Mindlin假设下的算例并与三维有限元的计算结果进行了比较, 说明了该方法在厚板情况下也是相当精确的.     

功能梯度材料明德林矩形微板的热弹性阻尼

功能梯度材料微板谐振器热弹性阻尼的建模和预测是此类新型谐振器热?弹耦合振动响应的新课题. 本文采用数学分析方法研究了四边简支功能梯度材料中厚度矩形微板的热弹性阻尼. 基于明德林中厚板理论和单向耦合热传导理论建立了材料性质沿着厚度连续变化的功能梯度微板热弹性自由振动控制微分方程. 在上下表面绝热边界条件下采用分层均匀化方法求解变系数热传导方程, 获得了用变形几何量表示的变温场的解析解. 从而将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的偏微分方程. 然后,利用特征值问题在数学上的相似性,求得了四边简支条件下功能梯度材料明德林矩形微板的复频率解析解, 进而利用复频率法获得了反映谐振器热弹性阻尼水平的逆品质因子. 最后, 给出了材料性质沿板厚按幂函数变化的陶瓷?金属组分功能梯度矩形微板的热弹性阻尼数值结果. 定量地分析了横向剪切变形、材料梯度变化以及几何参数对热弹性阻尼的影响规律. 结果表明, 采用明德林板理论预测的热弹性阻尼值小于基尔霍夫板理论的预测结果, 而且两者的差别随着相对厚度的增大而变得显著.      

功能梯度截顶圆锥壳的热弹性弯曲精确解

研究了功能梯度材料截顶圆锥壳在横向机械载荷与非均匀热载荷同时作用下的变形问题. 基于经典线性壳体理论推导出了以横向剪力和中面转角为基本未知量的功能梯度薄圆锥壳轴对称变形的混合型控制方程. 假设功能梯度圆锥壳的材料性质为沿厚度方向按照幂函数连续变化的形式. 然后采用解析方法求解,得到了问题的精确解. 分别就两端简支和两端固支边界条件,给出了圆锥壳的变形随其载荷、材料参数等变化的特征关系曲线,重点分析和讨论了载荷参数与材料梯度变化参数对变形的影响.      

功能梯度材料扁锥壳的热弹性大变形分析

研究了功能梯度材料扁薄锥壳在横向非均匀升温场中的几何非线性大变形问题.基于von Kármán几何非线性理论推导出了以中面位移为基本未知量的功能梯度扁薄锥壳在横向非均匀热载荷作用下的轴对称大挠度控制方程.采用打靶法数值求解所得非线性常微分方程边值问题,得到了锥壳的大挠度弯曲变形数值解.给出了锥壳的变形与其形状参数、载荷和材料参数等变化的特征关系曲线,分析和讨论了温度参数和材料梯度变化参数对变形的影响.     

Homogenized and classical expressions for static bending solutions for functionally graded material Levinson beams

The exact relationship between the bending solutions of functionally graded material (FGM) beams based on the Levinson beam theory and those of the corresponding homogenous beams based on the classical beam theory is presented for the material properties of the FGM beams changing continuously in the thickness direction. The deflection, the rotational angle, the bending moment, and the shear force of FGM Levinson beams (FGMLBs) are given analytically in terms of the deflection of the reference homogenous Euler-Bernoulli beams (HEBBs) with the same loading, geometry, and end supports. Consequently, the solution of the bending of non-homogenous Levinson beams can be simplified to the calculation of transition coefficients, which can be easily determined by variation of the gradient of material properties and the geometry of beams. This is because the classical beam theory solutions of homogenous beams can be easily determined or are available in the textbook of material strength under a variety of boundary conditions. As examples, for different end constraints, particular solutions are given for the FGMLBs under specified loadings to illustrate validity of this approach. These analytical solutions can be used as benchmarks to check numerical results in the investigation of static bending of FGM beams based on higher-order shear deformation theories.     

热/机械载荷下功能梯度材料矩形厚板的弯曲行为

采用Reddy高阶剪切板理论，考虑材料物性参数随坐标和温度变化的特性，研究在均匀变化的温度场内功能梯度材料矩形板在面内与横向载荷共同作用下的横向弯曲问题，基于一维DQ法和Galerkin技术，给出了一对边固支，另对边任意约束时板弯曲问题的半解析解，以Si3N4/SUS304板为例考察了材料组份，温度场，面内载荷及边界约束条件等对功能梯度材料板弯曲行为的影响。     

Axisymmetric bending analysis of thick functionally graded circular plates using fourth-order shear deformation theory

In the present article, axisymmetric bending and stretching of functionally graded (FG) circular plates subjected to uniform transverse loading based on fourth-order shear deformation plate theory (FOST) have been studied. Using a fourth-order shear deformation theory, the solutions for deflection and rotation functions of FG plates are presented in terms of the corresponding quantities for a homogeneous plate using the classical plate theory (CPT), from which solutions one can easily obtain the FOST solutions for axisymmetric bending of FG circular plates. It is assumed that the effective mechanical properties of the functionally graded plates through the thickness are continuous functions of the volume fractions of the constituent parts which are themselves defined by a power-law function. Numerical results for maximum deflection and shear stress are presented for various percentages of ceramic–metal volume fractions. These results are also compared with those obtained from the first-order shear deformation plate theory of Mindlin (FST), the third-order shear deformation plate theory of Reddy (TST) as well as the exact three-dimensional elasticity solution. It is found that although the maximum deflections obtained using FOST and TST are close to each other, the through-thickness shear stress is predicted more accurately by the FOST formulation than by the TST.     

Free vibration of functionally graded sandwich plates using four-variable refined plate theory

This paper uses the four-variable refined plate theory (RPT) for the free vibration analysis of functionally graded material (FGM) sandwich rectangular plates. Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theory presented is variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton’s principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. The validity of the theory is shown by comparing the present results with those of the classical, the first-order, and the other higher-order theories. The proposed theory is accurate and simple in solving the free vibration behavior of the FGM sandwich plates.     

非保守力下温度场中FGM圆板的非线性力学行为

研究了温度场中非保守功能梯度材料(FGM)圆板的非线性力学行为。基于经典板理论,推导了受非保守力作用的FGM圆板在温度场中的控制微分方程。采用打靶法分析了由陶瓷二氧化锆和金属钛合金两相材料组成的非保守FGM圆板在均匀和非均匀升温场中的非线性力学行为。给出了不同均匀升温和非均匀升温场下,FGM圆板在非保守载荷作用下的平衡路径和平衡构形。分析并讨论了均匀和非均匀升温、材料梯度指数对非保守圆板过屈曲和弯曲行为的影响。结果表明:温度场中,非保守FGM圆板发生弯曲而纯陶瓷圆板会发生过屈曲行为;当梯度指数p=2,非保守载荷q=52时,均匀升温场中非保守圆板的变形大于非均匀升温场中非保守圆板的变形。     

Free vibration of functionally graded sandwich plates using four-variable refined plate theory

This paper uses the four-variable refined plate theory (RPT) for the free vibration analysis of functionally graded material (FGM) sandwich rectangular plates.Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theory presented is variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. The validity of the theory is shown by comparing the present results with those of the classical, the first-order, and the other higher-ordex theories. The proposed theory is accurate and simple in solving the free vibration behavior of the FGM sandwich plates.     

基于物理中面FGM中厚板自由振动的有限元分析

基于物理中面和一阶剪切变形板理论,研究了不同边界条件下功能梯度材料(FGM)中厚板的自由振动问题．假设功能梯度板的材料性质沿厚度方向按幂函数规律连续变化．根据哈密顿原理建立了FGM板有限元形式的自由振动方程,利用MATLAB软件编写程序进行了计算．通过数值算例,讨论了不同边界条件下FGM中厚板的无量纲频率随材料梯度指数和厚宽比的变化情况,并与经典板理论下的频率进行了比较．