钢筋混凝土界面的近场动力学方法

近场动力学方法已被广泛用于钢筋混凝土的开裂破坏研究,传统近场动力学方法的控制方程与参数是基于同种均质材料的能量方程确定,在处理不同种材料之间的相互作用时,无法合理反映其界面的力学行为.针对这一问题,通过分析钢筋混凝土界面的黏结-滑移机理,提出了近场动力学界面区材料点的相互作用模型,发展了考虑钢筋混凝土界面黏结的键基近场动力学方法.基于键基近场动力学与连续介质力学的能量密度等效方法,提出了界面微弹性参数的确定方法;根据钢筋肋间混凝土的应力分布规律,获得界面材料点域半径与受限楔体半径的等效关系;利用界面黏结-滑移曲线峰值应力对应的滑移变形,给出了界面临界拉伸常数确定方法.通过与2组钢筋混凝土构件的拉拔试验对比,验证了发展的界面近场动力学方法,并开展了不同条件下钢筋混凝土构件的数值试验.结果表明,发展的近场动力方法能够合理反映钢筋直径、锚固长度、混凝土强度以及肋间距对钢筋混凝土界面黏结行为的影响,体现了所提方法的合理性与优越性.     

一种近场动力学非普通状态理论零能模式控制方法

近场动力学非普通状态理论在采用节点积分时将引起零能模式,造成位移场、应力应变场的数值不稳定性,影响计算精度甚至会导致完全错误的结果,因此必须对其进行控制.目前国际上还没有十分有效的零能模式控制方法.本文针对零能模式问题,提出了一种通用的、高效的控制方法.根据近场动力学线性键理论,确定非均匀变形对应弹性张量的具体形式,考虑了微模量随不同作用键的变化.通过最小位能原理推导出非均匀变形引起的力状态,结合近场动力学力状态,得到稳定力状态表达式.从而建立起基于线性键理论的稳定关联材料模型,并应用于含圆孔平板、三点弯试件线弹性变形和损伤破坏过程模拟.数值结果表明,本文模型能有效抑制近场动力学非普通状态理论中的零能模式现象.与已有零能模式控制方法相比,其物理意义明确,不包含控制参数,避免了复杂的零能模式参数调节过程,提高了计算效率.      

一种近场动力学非普通状态理论零能模式控制方法

近场动力学非普通状态理论在采用节点积分时将引起零能模式,造成位移场、应力应变场的数值不稳定性,影响计算精度甚至会导致完全错误的结果,因此必须对其进行控制.目前国际上还没有十分有效的零能模式控制方法.本文针对零能模式问题,提出了一种通用的、高效的控制方法.根据近场动力学线性键理论,确定非均匀变形对应弹性张量的具体形式,考虑了微模量随不同作用键的变化.通过最小位能原理推导出非均匀变形引起的力状态,结合近场动力学力状态,得到稳定力状态表达式.从而建立起基于线性键理论的稳定关联材料模型,并应用于含圆孔平板、三点弯试件线弹性变形和损伤破坏过程模拟.数值结果表明,本文模型能有效抑制近场动力学非普通状态理论中的零能模式现象.与已有零能模式控制方法相比,其物理意义明确,不包含控制参数,避免了复杂的零能模式参数调节过程,提高了计算效率.     

近场动力学最小二乘和有限元耦合方法研究

准确高效地对损伤和断裂问题进行建模是计算力学中的关键研究课题之一。将近场动力学最小二乘在处理含裂纹等非连续问题上的优势和有限元计算效率高及便于施加边界条件的优势结合,提出了近场动力学最小二乘和有限元耦合方法。将裂纹及其可能扩展区域划分为近场动力学区域,边界及其他区域划分为有限元区域,并将其中的结点类型分为近场动力学结点和有限元结点。有限元结点仅与同单元中的其他结点产生作用,近场动力学结点则与其族内的所有结点产生作用。将以上的单元刚度矩阵和质量矩阵进行组装得到整体刚度矩阵和整体质量矩阵。本文的耦合方法数值实现简单有效,相对于键基和常规态基近场动力学,该耦合方法包含了应力和应变的概念,同时不受零能模式的影响。一维和二维静态和动态问题的研究,验证了本文的耦合方法的有效性和准确性。     

近场动力学在断裂力学领域的研究进展

近场动力学采用非局部积分计算节点内力, 利用统一数学框架描述空间连续与非连续, 避免了非连续区局部空间导数引起的应力奇异, 数值上具有无网格属性, 可自然模拟材料结构的断裂问题. 本文概述了近场动力学的弹性本构力模型, 系统介绍了近场动力学临界伸长率、临界能量密度以及材料强度相关的键失效准则. 详细介绍了近场动力学在断裂力学领域的研究进展, 包括断裂参数能量释放率与应力强度因子的求解、J积分、混合型裂纹、弹塑性断裂、黏聚力模型、动态断裂、材料界面断裂以及疲劳裂纹扩展等. 最后讨论了断裂问题近场动力学研究的发展方向.      

钢筋混凝土结构破坏过程的近场动力学模拟

采用近场动力学(Peridynamics,PD)方法对钢筋混凝土结构破坏过程进行模拟,在"键"型近场动力学模型的基础上,考虑物质点对间的转动以突破泊松比的限制,采用能够描述混凝土材料的拉压异性和断裂特征的损伤模型,引入动态松弛、分级加载、平衡收敛准则和冲击接触等算法,建立了能准确描述钢筋混凝土结构破坏的近场动力学模型。模拟了钢筋混凝土梁在不同荷载作用下破坏的全过程,裂纹扩展路径以及最终破坏形式均与试验结果吻合,为解决工程结构破坏问题提供了一种有效的方法。     

高精度近场动力学方法:一维键型研究

近些年发展起来的近场动力学方法对于模拟复杂的断裂破坏问题具有显著优势.然而,计算精度不高一直是影响该方法进一步发展的瓶颈问题之一.区域积分不精确和键缺失导致的边界效应是降低该方法计算精度的两个主要原因.针对一维键型近场动力学模型,本文通过修正微模量提高区域积分的精度,通过理性构建固定边界和力边界虚拟键改善边界效应,建立了高精度近场动力学方法.数值结果表明,与经典的近场动力学方法相比,本文方法显著提高了计算精度,准静态常应变问题甚至能够达到机器精度.     

近场动力学微极模型在求解静力学问题中的应用

阐述了近场动力学微极模型的求解方法,可同时考虑物质点的平动和转动效应;在此基础上,给出了近场动力学微极模型的静力求解格式,在求解静力学问题时无需引入阻尼项,提高了"键"型近场动力学的计算效率.基于所建立的近场动力学微极模型的静力求解体系,模拟计算了简支梁的弹性变形和含单、双裂纹板的破坏过程.并与理论解和其他数值方法模拟结果进行了对比分析,验证了本文建立的近场动力学微极模型静力求解方法的有效性和准确性.     

近场动力学与有限元的混合建模方法

综述了近场动力学与有限元混合建模方法的研究进展,阐明了各种混合建模方法的基本原理与特点,并重点介绍本课题组在近场动力学与有限元方法混合建模方面的研究工作。现有近场动力学与有限元混合建模方法包括位移协调约束、力耦合、混合函数方法以及子模型方法等,除子模型方法外,都可归结为并行式多尺度分析方法,其基本思想是将计算结构划分为近场动力学子域、有限元子域以及两者的交界区域(或重叠区域、或界面单元、或过渡区域)。子模型方法可归结为显-显分析方法,先采用显式有限元进行整体分析,后采用近场动力学方法对重点区域进行分析。混合建模方法需要着重提高交界区域的计算精度,并且消除虚假力和虚假应力波问题。提出了通过力耦合的近场动力学与有限元混合建模的隐式分析方法,该方法不再设置重叠区,通过杆单元连接近场动力学子域与有限元子域,其中界面上的有限元结点不仅与其所在单元的其他结点发生作用,还通过杆单元与以其为圆心、一定半径的圆域内的其他物质点相互作用。研究表明,本文提出的混合模型和求解方法既能有效解决裂纹扩展等不连续问题,又可提高计算效率,为工程结构破坏问题的计算分析提供一种有效方法。     

含初始裂纹巴西圆盘劈裂问题的非局部近 场动力学建模

巴西圆盘劈裂是弹性力学及岩石力学与工程中的经典问题。在非局部键型近场动力 学理论的基础上,引入物质点对的转动自由度构建双参数微观弹脆性近场动力学本构力模型 以突破常规模型的应用范围限制,并考虑岩石混凝土类材料的宏观拉压异性和断裂特征。引 入动态松弛、粒子系统力边界条件和系统平衡弛豫等算法,实现了含不同倾角中心裂纹巴西 圆盘受压劈裂破坏全过程的近场动力学数值模拟,裂纹扩展路径及破坏形式均与试验结果高 度吻合,为裂纹扩展和断裂破坏问题的数值模拟提供了新的选择。     

A non-ordinary state-based peridynamic method to model solid material deformation and fracture

In this paper, we develop a new non-ordinary state-based peridynamic method to solve transient dynamic solid mechanics problems. This new peridynamic method has advantages over the previously developed bond-based and ordinary state-based peridynamic methods in that its bonds are not restricted to central forces, nor is it restricted to a Poisson’s ratio of 1/4 as with the bond-based method. First, we obtain non-local nodal deformation gradients that are used to define nodal strain tensors. The deformation gradient tensors are used with the nodal strain tensors to obtain rate of deformation tensors in the deformed configuration. The polar decomposition of the deformation gradient tensors are then used to obtain the nodal rotation tensors which are used to rotate the rate of deformation tensors and previous Cauchy stress tensors into an unrotated configuration. These are then used with conventional Cauchy stress constitutive models in the unrotated state where the unrotated Cauchy stress rate is objective. We then obtain the unrotated Cauchy nodal stress tensors and rotate them back into the deformed configuration where they are used to define the forces in the nodal connecting bonds. As a first example we quasi-statically stretch a bar, hold it, and then rotate it ninety degrees to illustrate the methods finite rotation capabilities. Next, we verify our new method by comparing small strain results from a bar fixed at one end and subjected to an initial velocity gradient with results obtained from the corresponding one-dimensional small strain analytical solution. As a last example, we show the fracture capabilities of the method using both a notched and un-notched bar.     

The singularity in the state-based peridynamic solution of uniaxial tension

We solve the local uniaxial tension of an infinite rod in the framework of non-ordinary state-based peridynamics.The singular solutions of stress and displacement are acquired.When the influencing range of the window function approaches zero,these two solutions will return to the solutions of the classical elasticity.The analysis shows that the singularities of the solutions stem from such a feature of the window function that must be represented by a rapidly decreasing function in physics.Contrary to the classical elasticity,the stress solution of peridynamics is smoother than the displacement solution.In addition,a criterion used to select the window function is proposed in this paper.     

Superposition of non-ordinary state-based peridynamics and finite element method for material failure simulations

Superposition of non-ordinary state-based peridynamics and finite element method for material failure simulations, including crack propagation and strain localization is developed. By this approach, a peridynamic model capable of effectively treating strong and weak discontinuities is superimposed in the critical regions over an underlying finite element mesh placed over the entire problem domain. A rigorous variational framework of coupling local finite element and nonlocal peridynamics approximations that is free of blending parameters is developed. Several numerical examples involving mixed-model fracture, three-dimensional adaptive crack propagation and strain localization induced ductile failure demonstrate the rational and efficiency of the proposed superposition-based coupling approach.

     

A peridynamic implementation of crystal plasticity

This paper presents the first application of peridynamics theory for crystal plasticity simulations. A state-based theory of peridynamics is used (Silling et al., 2007) where the forces in the bonds between particles are computed from stress tensors obtained from crystal plasticity. The stress tensor at a particle, in turn, is computed from strains calculated by tracking the motion of surrounding particles. We have developed a quasi-static implementation of the peridynamics theory. The code employs an implicit iterative solution procedure similar to a non-linear finite element implementation. Peridynamics results are compared with crystal plasticity finite element (CPFE) analysis for the problem of plane strain compression of a planar polycrystal. The stress, strain field distribution and the texture formation predicted by CPFE and peridynamics were found to compare well. One particular feature of peridynamics is its ability to model fine shear bands that occur naturally in deforming polycrystalline aggregates. Peridynamics simulations are used to study the origin and evolution of these shear bands as a function of strain and slip geometry.     

含圆孔拉伸板的近场动力学数值模拟

首先推导了非普通状态为基础的近场动力学基本方程,引入损伤理论,对非普通状态为基础的近场动力学基本方程进行离散化,编制了非普通状态为基础的近场动力学数值分析程序。利用非普通状态为基础的近场动力学理论对圆孔拉伸板的断裂和非断裂问题进行了数值模拟。数值结果表明近场动力学理论不仅能模拟非断裂问题,也能模拟断裂问题,而且该方法不需要借助任何外部断裂准则就能很好地模拟裂纹的扩展和连接过程,相对于其它的数值模拟方法具有很大的优势,它为材料断裂问题提供了一种新方法和新思路。     

非常规态型近场动力学热黏塑性模型及其应用

在非常规态型近场动力学(non-ordinary state-based peridynamics, NOSB-PD) 理论框架下构建了考虑应变率效应、塑性硬化、热软化效应和材料断裂特征的非局部三维热黏塑性固体本构模型以及相应的非局部空间积分型数值算法, 并应用于金属类材料和构件在冲击载荷作用等工况下的高应变率热黏塑性变形与破坏分析. 通过对经典含初始裂纹Kalthoff-Winkler板冲击试验进行三维近场动力学模拟, 可得到裂纹的起裂角度、扩展路径、扩展速度以及裂纹扩展过程中靶板等效应力和温度分布, 所得结果与已有试验结果和其他数值方法结果吻合较好. 在此基础上, 应用该模型分析了不同冲击速度作用下金属靶板的变形与裂纹扩展过程, 结果表明: 该模型能较好地模拟不同冲击速度(应变率)情况下靶板的变形与破坏全过程. 随着冲击速度变化, 初始裂纹的起裂时间、扩展方向和扩展速度呈一定规律变化. 冲击速度越低, 起裂时间越晚(直至冲击速度低于某值时初始裂纹不扩展), 裂纹扩展速度峰值越低, 冲击过程中靶板温度峰值越低, 完全扩展所需时间越长.      

Couple stresses in crystalline solids: origins from plastic slip gradients, dislocation core distortions, and three-body interatomic potentials

In the presence of plastic slip gradients, compatibility requires gradients in elastic rotation and stretch tensors. In a crystal lattice the gradient in elastic rotation can be related to bond angle changes at cores of so-called geometrically necessary dislocations. The corresponding continuum strain energy density can be obtained from an interatomic potential that includes two- and three-body terms. The three-body terms induce restoring moments that lead to a couple stress tensor in the continuum limit. The resulting stress and couple stress jointly satisfy a balance law. Boundary conditions are obtained upon stress, couple stress, strain and strain gradient tensors. This higher-order continuum theory was formulated by Toupin (Arch. Ration. Mech. Anal. 11 (1962) 385). Toupin's theory has been extended in this work to incorporate constitutive relations for the stress and couple stress under multiplicative elastoplasticity. The higher-order continuum theory is exploited to solve a boundary value problem of relevance to single crystal and polycrystalline nano-devices. It is demonstrated that certain slip-dominated deformation mechanisms increase the compliance of nanostructures in bending-dominated situations. The significance of these ideas in the context of continuum plasticity models is also dwelt upon.     

Bond-based peridynamic modelling of singular and nonsingular crack-tip fields

A static meshfree implementation of the bond-based peridynamics formulation for linearly elastic solids is applied to the study of the transition from local to nonlocal behavior of the stress and displacement fields in the vicinity of a crack front and other sources of stress concentration. The long-range nature of the interactions between material points that is intrinsic to and can be modulated within peridynamics enables the smooth transition from the square-root singular stress fields predicted by the classical (local) linear theory of elasticity, to the nonsingular fields associated with nonlocal theories. The accuracy of the peridynamics scheme and the transition from local to nonlocal behavior, which are dictated by the lattice spacing and micromodulus function, are assessed by performing an analysis of the boundary layer that surrounds the front of a two dimensional crack subjected to mode-I loading and of a cracked plate subjected to far-field tension.     

泡沫铝夹层结构抗冲击性能的近场动力学模拟分析

针对某光学舱所采用的泡沫铝夹层防护结构在破片冲击下的抗冲击性能问题,采用Monte-Carlo方法创建了泡沫铝结构的二维细观模型,在常规态型近场动力学理论中引入了Mises屈服准则和线性各向同性强化模型,建立了近场动力学塑性本构的数值计算框架。基于近场动力学计算程序模拟了低速冲击作用下泡沫铝夹层结构的塑性变形以及有机玻璃背板的裂纹扩展形态,分析了泡沫铝芯材孔隙率对该夹层结构抗冲击性能和损伤模式的影响规律。结果表明：泡沫铝夹层结构良好的塑性变形能力是其发挥缓冲与防护作用的主要因素,并且在一定范围内,泡沫铝芯材孔隙率越高,则夹层结构具有更好的抗冲击性能;当泡沫铝孔隙率从0.4提升到0.7时,泡沫铝对冲击物的动能吸收率从90%提高到99%;模拟结果与实验结果具有较好的一致性,验证了模拟结果的准确性和分析结论的有效性。通过数值模拟,预测了有机玻璃背板的裂纹扩展形态,发现提高泡沫铝的孔隙率能获得更好的防护效果。