Subsolidus phase relation in the Bi2O3-Fe203-La2O3 system

Bismuth-containing semiconductor material is a hot topic in photocatalysts because of its effective absorption under the visible light. In this paper, we expect to explore a new bismuth-based photocatalyst by studying the subsolidus phase relations of the Bi2O3-Fe2O3-La2O3 system. The X-ray diffraction data shows that in this ternary system the ternary compound does not exist, while seven binary compounds （including one solid solution series Bi1-xLaxO1.5 with 0.167 〈 x 〈 0.339） are obtained and eight compatibility triangles are determined.     

Magnetic iron oxide nanoparticles: Synthesis and surface coating techniques for biomedical applications

Iron oxide nanoparticles are the most popular magnetic nanoparticles used in biomedical applications due to their low cost, low toxicity, and unique magnetic property. Magnetic iron oxide nanoparticles, including magnetite （Fe304） and maghemite （γ-Fe203）, usually exhibit a superparamagnetic property as their size goes smaller than 20 nm, which are often denoted as superparamagnetic iron oxide nanoparticles （SPIONs） and utilized for drug delivery, diagnosis, therapy, and etc. This review article gives a brief introduction on magnetic iron oxide nanoparticles in terms of their fundamentals of magnetism, magnetic resonance imaging （MRI）, and drug delivery, as well as the synthesis approaches, surface coating, and application examples from recent key literatures. Because the quality and surface chemistry play important roles in biomedical applications, our review focuses on the synthesis approaches and surface modifications of iron oxide nanopar- ticles. We aim to provide a detailed introduction to readers who are new to this field, helping them to choose suitable synthesis methods and to optimize the surface chemistry of iron oxide nanoparticles for their interests.     

Microwave absorption properties of a double-layer absorber based on nanocomposite BaFe12O19/α-Fe and nanocrystalline α-Fe microfibers

The nanocomposite BaFe12O19/α-Fe and nanocrystalline α-Fe microfibers with diameters of 1–5 μm, high aspect ratios and large specific areas are prepared by the citrate gel transformation and reduction process. The nanocomposite BaFe12O19/α-Fe microfibers show some exchange–coupling interactions largely arising from the magnetization hard(BaFe12O19) and soft(α-Fe) nanoparticles. For the microwave absorptions, the double-layer structures consisting of the nanocomposite BaFe12O19/α-Fe and α-Fe microfibers each exhibit a wide band and strong absorption behavior. When the nanocomposite BaFe12O19/α-Fe microfibers are used as a matching layer of 2.3 mm in thickness and α-Fe microfibers as an absorbing layer of 1.2 mm in thickness, the optimal reflection loss(RL) achieves-47 dB at 15.6 GHz, the absorption bandwidth is about 12.7 GHz ranging from 5.3 to 18 GHz, exceeding-20 dB, which covers 72.5% C-band(4.2–8.2 GHz)and whole X-band(8.2–12.4 GHz) and Ku-band(12.4–18 GHz). The enhanced absorption properties of these double-layer absorbers are mainly ascribed to the improvement in impedance matching ability and microwave multi-reflection largely resulting from the dipolar polarization, interfacial polarization, exchange–coupling interaction, and small size effect.     

Manipulation of extraordinary acoustic transmission by a tunable bull’s eye structure

Extraordinary acoustic transmission （EAT） has been investigated in a tunable bull＇s eye structure. We demonstrate that the transmission coefficient of acoustic waves can be modulated by a grating structure. When the grating is located at a distance of 0.5 mm from the base plate, the acoustic transmission shows an 8.77-fold enhancement compared to that by using a traditional bull＇s eye structure. When the distance increases to 1.5 mm, the transmission approaches zero, indicating a total reflection. Thus, we can make an efficient modulation of acoustic transmission from 0 to 877%. The EAT effects have been ascribed to the coupling of structure-induced resonance with the diffractive wave and the waveguide modes, as well as the Fabry-Perot resonances. As a potential application, the modulation of far-field collimation is illustrated in the proposed bull＇s eye structure.     

A new model for film bulk acoustic wave resonators

Based on cavity resonance and sandwich composite plate （3D） theoretical model for frequency dispersion characterization theory, this paper presents a universal three-dimensional and displacement profile shapes of the film bulk acoustic resonator （FBARs）. This model provides results of FBAR excited thickness-extensional and flexure modes, and the result of frequency dispersion is proposed in which the thicknesses and impedance of the electrodes and the piezoelectric material are taken into consideration; its further simplification shows good agreement with the modified Butterworth-Van-Dyke （MBVD） model. The displacement profile reflects the vibration stress distribution of electrode shapes and the lateral resonance effect, which depends on the axis ratio of the electrode shapes a/b. The results are consistent with the 3D finite element method modeling and laser interferometry measurement in general.     

TiO_2对α-Fe_2O_3纳米微粒拉曼散射效应的影响

选取α Fe2O3和TiO2研究一种氧化物对另一种氧化物的拉曼散射效应。采用Sol gel方法制备纳米α Fe2O3/TiO2复合微粒,α Fe2O3粒径及含量分别为20nm、150nm和3%、6%、12%。制备过程中调节水解时的pH值和热处理温度,得到掺杂α Fe2O3粒子的不同晶型的TiO2纳米颗粒。Raman测量结果显示,α Fe2O3粒径越小、含量越高,TiO2对其散射效应的影响越大。不同的TiO2晶型对α Fe2O3纳米粒子的拉曼增强效应也不同。锐钛矿型及金红石型TiO2对α Fe2O3有一定的拉曼增强作用,当水解pH值较小时,得到板钛矿型TiO2,由于部分板钛矿型TiO2振动声子模的峰位与α Fe2O3的重叠,所以尚难观察它对α Fe2O3的拉曼增强效应。     

Influence of roughness on the detection of mechanical characteristics of low-k film by the surface acoustic waves

The surface acoustic wave （SAW） technique is a precise and nondestructive method to detect the mechanical charac- teristics of the thin low dielectric constant （low-k） film by matching the theoretical dispersion curve with the experimental dispersion curve. In this paper, the influence of sample roughness on the precision of SAW mechanical detection is inves- tigated in detail. Random roughness values at the surface of low-k film and at the interface between this low-k film and the substrate are obtained by the Monte Carlo method. The dispersive characteristic of SAW on the layered structure with rough surface and rough interface is modeled by numerical simulation of finite element method. The Young＇s moduli of the Black DiamondTM samples with different roughness values are determined by SAWs in the experiment. The results show that the influence of sample roughness is very small when the root-mean-square （RMS） of roughness is smaller than 50 nm and correlation length is smaller than 20 μm. This study indicates that the SAW technique is reliable and precise in the nondestructive mechanical detection for low-k films.     

Precursor evolution and growth mechanism of BTO/YBCO films by TFA–MOD process

In this study, BaTiO3 （BTO）-doped YBCO films are prepared on LaA103 （100） single-crystal substrates by metal- organic decomposition （MOD） using trifluoroacetate （TFA） precursor solutions. The critical current density （Jc） of BTO/YBCO film is as high as 10 MA/cm2 （77 K, 0 T）. The BTO peak is found in the X-ray diffraction （XRD） pattern of a final YBCO superconductivity film. Moreover, a comprehensive study of the precursor evolution is conducted mainly by X-ray analysis and μ-Raman spectroscopy. It is found that the TFA begins to decompose at the beginning of the thermal process, and then further decomposes as temperature increases, and at 700 ℃ BTO nanoparticles begin to appear. It sug- gests that the YBCO film embedded with BTO nanoparticles, whose critical current density （Jc） is enhanced, is successfully prepared by an easily scalable chemical solution deposition technique.     

Effect of alumina thickness on Al_2O_3/InP interface with post deposition annealing in oxygen ambient

In this paper, the effect of alumina thickness on Al2O3/InP interface with post deposition annealing （PDA） in the oxygen ambient is studied. Atomic layer deposited （ALD） Al2O3 films with four different thickness values （5 nm, 7 nm, 9 nm, 11 rim） are deposited on InP substrates. The capacitance-voltage （C-V） measurement shows a negative correlation between the alumina thickness and the frequency dispersion. The X-ray photoelectronspectroscopy （XPS） data present significant growth of indium-phosphorus oxide near the Al2O3/InP interface, which indicates serious oxidation of InP during the oxygen annealing. The hysteresis curve shows an optimum thickness of 7 nm after PDA in an oxygen ambient at 500 ℃ for 10 min. It is demonstrated that both sides of the interface are impacted by oxygen during post deposition annealing. It is suggested that the final state of the interface is of reduced positively charged defects on Al2O3 side and oxidized InP, which degrades the interface.     

Influence of Non-Maxwellian Particles on Dust Acoustic Waves in a Dusty Magnetized Plasma

In this paper an investigation into dust acoustic solitary waves(DASWs) in the presence of superthermal electrons and ions in a magnetized plasma with cold dust grains and trapped electrons is discussed. The dynamic of both electrons and ions is simulated by the generalized Lorentzian(κ) distribution function(DF). The dust grains are cold and their dynamics are studied by hydrodynamic equations. The basic set of fluid equations is reduced to modified Korteweg-de Vries(mKdV) equation using Reductive Perturbation Theory(RPT). Two types of solitary waves, fast and slow dust acoustic soliton(DAS) exist in this plasma. Calculations reveal that compressive solitary structures are possibly propagated in the plasma where dust grains are negatively(or positively) charged. The properties of DASs are also investigated numerically.     

Effect of ultrathin GeO_x interfacial layer formed by thermal oxidation on Al_2O_3 capped Ge

We propose a modified thermal oxidation method in which an Al2O3 capping layer is used as an oxygen blocking layer （OBL） to form an ultrathin GeOx interracial layer, and obtain a superior Al2O3/GeOx/Ge gate stack. The GeOx interfacial layer is formed in oxidation reaction by oxygen passing through the Al2O3 OBL, in which theAl2O3 layer could restrain the oxygen diffusion and suppress the GeO desorption during thermal treatment. The thickness of the GeOx interfacial layer would dramatically decrease as the thickness of Al2O3 OBL increases, which is beneficial to achieving an ultrathin GeOx interfacial layer to satisfy the demand for small equivalent oxide thickness （EOT）. In addition, the thickness of the GeOx interfacial layer has little influence on the passivation effect of the Al2O3/Ge interface. Ge （100） p-channel metal- oxide-semiconductor field-effect transistors （pMOSFETs） using the Al2O3/GeOx/Ge gate stacks exhibit excellent electrical characteristics; that is, a drain current on-off （Ionloft） ratio of above 1 104, a subthreshold slope of - 120 mV/dec, and a peak hole mobility of 265 cm2/V.s are achieved.     

Enhancing visible-light photocatalytic activity of α-Bi2O3 via non-metal N and S doping

In recent years, some important research indicated that the visible-light activity of photocatalysts could be enhanced via incorporating p-block non-metal elements into the lattice. In this paper, we investigated the electronic structures of pure and different non-metal （C, N, S, F, Cl, and Br） doped α-Bi2O3 using first-principles calculations based on the density functional theory. The band structures, the electronic densities of states, and the effective masses of electrons and holes for doped α-Bi2O3 were obtained and analyzed. The N and S dopings narrowed the band gap and reduced the effective mass of the carriers, which are beneficial for the photocatalytic performance. The theoretical predication was further confirmed by the experimental results.     

Hybrid device for acoustic noise reduction and energy harvesting based on a silicon micro-perforated panel structure

A kind of hybrid device for acoustic noise reduction and vibration energy harvesting based on the silicon micro- perforated panel （MPP） resonant structure is investigated in the article. The critical parts of the device include MPP and energy harvesting membranes. They are all fabricated by means of silicon micro-electro-mechanical systems （MEMS） tech- nology. The silicon MPP has dense and accurate micro-holes. This noise reduction structure has the advantages of wide band and higher absorption coefficients. The vibration energy harvesting part is formed by square piezoelectric membranes arranged in rows. ZnO material is used as it has a good compatibility with the fabrication process. The MPP, piezo- electric membranes, and metal bracket are assembled into a hybrid device with multifunctions. The device exhibits good performances of acoustic noise absorption and acoustic-electric conversion. Its maximum open circuit voltage achieves 69.41 mV.     

Investigation of a 4H-SiC metal-insulationsemiconductor structure with an A1203/SiO2 stacked dielectric

Atomic layer deposited （ALD） Al2O3/dry-oxidized ultrathin SiO2 films as a high-k gate dielectric grown on 8° off-axis 4H-SiC （0001） epitaxial wafers are investigated in this paper. The metal-insulation-semiconductor （MIS） capacitors, respectively with different gate dielectric stacks （Al2O3/SiO2, Al2O3, and SiO2） are fabricated and compared with each other. The I-V measurements show that the Al2O3/SiO2 stack has a high breakdown field （≥12 MV/cm） comparable to SiO2, and a relatively low gate leakage current of 1 × 10-7 A/cm2 at an electric field of 4 MV/cm comparable to Al2O3. The 1-MHz high frequency C-V measurements exhibit that the Al2O3/SiO2 stack has a smaller positive flat-band voltage shift and hysteresis voltage, indicating a less effective charge and slow-trap density near the interface.     

简单的方法制备°-Fe2O3纳米粒子及其磁性质和电化学性质

报道了制备磁性Fe2O3纳米粒子的一种简单易行的方法．利用部分还原共沉淀法， 以Na2S2O4作为还原剂， 用FeCl3先制备出Fe2O3纳米微粒， 再在空气中直接煅烧， 成功地制备出粒径较均匀(约13 nm)的磁性Fe2O3微粒． 实验发现Na2S2O4在部分还原共沉淀法中起到了去氧剂兼还原剂的特殊作用．研究表明， 样品在室温下具有铁磁性， 其饱和磁化强度和矫顽力分别为70 emu/g和164 Oe； 产物具有好的电化学性质，在3.0?0.3 V(相对于金属锂)、0.2 mA/cm2时，样品的首次放电容量可达到933 mAh/g．同时还讨论了放电过程中金属锂与Fe2O3的反应机理．     

Fabrication and properties of high performance YBa_2Cu_3O_(7-δ) radio frequency SQUIDs with step-edge Josephson junctions

We describe the fabrication of high performance YBa2Cu3O7-δ（YBCO） radio frequency（RF） superconducting quantum interference devices（SQUIDs）, which were prepared on 5 mm×5 mm LaAlO3（LAO） substrates by employing stepedge junctions（SEJs） and in flip-chip configuration with 12 mm×12 mm resonators. The step in the substrate was produced by Ar ion etching with step angles ranging from 47°to 61°, which is steep enough to ensure the formation of grain boundaries（GBs） at the step edges. The YBCO film was deposited using the pulsed laser deposition（PLD） technique with a film thickness half of the height of the substrate step. The inductance of the SQUID washer was designed to be about 157 pH.Under these circumstances, high performance YBCO RF SQUIDs were successfully fabricated with a typical flux-voltage transfer ratio of 83 mV/Φ0, a white flux noise of 29 μΦ0/（Hz）^1/2, and the magnetic field sensitivity as high as 80 fT/（Hz）^1/2.These devices have been applied in magnetocardiography and geological surveys.     

α-Fe_2O_3纳米粒子Morin相变的Raman光谱研究

本文首次用Raman光谱法研究了粒子尺寸和Co2 +包附对α-Fe2 O3纳米粒子Morin相变温度TM的影响机制。测量结果显示纳米粒子α -Fe2 O3的振动模相对大块样品发生了红移和宽化 ,粒子愈小红移和宽化愈显著。表明表面Fe3+离子与配位氧离子的键距增大 ,键长呈从体相Fe-O键长过渡到表面Fe -O键长的某种分布。这种小尺寸引起的键长改变导致α -Fe2 O3粒子的单离子各向异性能减小 ,因此降低了样品的TM。分析显示Co2 +包附导致α -Fe2 O3粒子TM 的大幅下降可能是由单离子各向异性的减小和Co2 +与Fe3+之间的磁偶极子相互作用各向异性共同作用的结果     

Laser-induced voltage effects in CaaCoaO9 thin films on tilted LaAlO3（001） substrates grown by chemical solution deposition

Laser-induced voltage effects in c-axis oriented Ca3Co4O9 thin films have been studied with samples fabricated on 10°tilted LaAIO3 （001） substrates by a simple chemical solution deposition method. An open-circuit voltage with a rise time of about 10 ns and full width at half maximum of about 28 ns is detected when the film surface is irradiated by a 308-nm laser pulse with a duration of 25 ns. Besides, opemcircuit voltage signals are also observed when the film surface is irradiated separately by the laser pulses of 532 nm and 1064 nm. The results indicate that Ca3Co4O9 thin films have a great potential application in the wide range photodetctor from the ultraviolet to near infrared regions.     

二维镨-镉异核金属配合物的水热合成、晶体结构及谱学性能研究

利用水热合成法,以柔性的乙二胺四乙酸（H₄EDTA）为配体、氧化镨以及氯化镉为金属源合成了一种镨-镉异金属-有机配合物[Pr₂Cd₃(EDTA)₃(H₂O)₁₁]·14H₂O （1）。通过X射线单晶衍射确定化合物1的结构,该化合物属单斜晶系的C2空间群,a=16.154(3) Å,b=14.863(3) Å,c=14.875(3) Å,β=115.855(3)°,V=3214.2(9) Å3, Z=2,化合物1的结构中存在纳米尺寸大小的“心形”Pr₆Cd₆O₁₂轮簇。其中Cd2+的配位数为7,采取单帽三棱柱的配位构型,而Pr3+采取十配位双帽四方反棱柱的构型。EDTA4-配体的四个羧基全部去质子化,与一个Cd2+和两个Pr3+配位,其中4个羧基氧原子和2个氮原子都与Cd2+配位,两个羧基分别桥连1个Pr3+。Pr3+和Cd2+通过μ₂-O氧原子交替连接形成Pr₆Cd₆O₁₂轮簇,每个Pr₆Cd₆O₁₂轮簇与附近的6个Pr₆Cd₆O₁₂轮簇共边连接,从而形成一个二维（6, 3）层状结构。二维层再通过…AAA…类型的堆积方式形成三维超分子结构。游离水分子填充在二维层空隙中,与羧基以及配位水分子之间形成比较强的O-H…O氢键,这些氢键有利于结构的稳定。通过热重分析、稳态荧光光谱、热微扰二维红外相关光谱（2D-IR COS）、固体紫外-可见漫反射光谱等手段进一步对化合物1的谱学性能进行表征。在红外光谱上,由于存在大量的氢键,化合物的红外光谱在3 680～2 640 cm-1波数范围内出现宽而强的吸收谱带。同时配体H₄EDTA中的羧基脱去了质子氢,并且与金属离子发生配位,因此化合物1中羧基的C=O双键的伸缩振动吸收峰与未配位配体中的C=O双键的伸缩振动吸收峰相比,向低波数移动,在1 527 cm-1波数处出现吸收峰。固体荧光测试显示在325 nm的紫外光照射下,配合物1能发出强的360 nm左右的荧光,主要是由能量在Cd2+和EDTA4-之间发生明显的LMCT跃迁转移引起的,因此化合物1可作为一类潜在的发光材料。热微扰下的二维红外光谱显示,由于水分子与羧基及水分子之间存在氢键,使得O-H的伸缩振动吸收峰对热的微扰响应比较敏感。紫外-可见光谱测试显示化合物1在位于216 nm处出现很强的紫外吸收峰,归属于化合物1中EDTA4-配体的中n→σ*跃迁及π→π*,位于444, 468和484 nm的弱吸收峰,归属为Pr3+的f-f跃迁。