标准镜的高精度柔性支撑镜框的优化设计

为了实现干涉仪标准镜中光学元件的高精度定位,设计了一种柔性支撑镜框,研究了该结构的力学模型、结构参数、定位精度和透镜变形。首先,根据材料力学原理将柔性镜框等效为一个弹簧系统;根据力学方程和几何关系,建立了透镜中心位置与柔性结构的挠度之间的二元方程。然后,分析了安装位置、温度、结构参数对透镜位置以及作用力的影响。最后,应...     

便携式高速FTIR旋转式干涉仪数值模拟仿真分析

旋转式干涉仪可实现便携式傅里叶红外光谱仪的小型化设计,同时可提供高速光谱输出,但其光程差存在非线性问题。本文详细分析了便携式傅里叶转换红外光谱(FTIR)旋转式干涉仪结构,建立参考坐标系,根据几何光学原理推导了转镜转动光程差方程,并进行了数值模拟仿真分析,阐明了干涉仪光程差与转镜厚度、折射率和转角参数间的设计关系。采用无参考激光采样方式,利用多项式拟合光程差与转角的非线性关系,获得等光程差对应的时间非均匀关系,从而实现非等时间下的等光程差采样。相比等时间采样方式光程差速度的不稳定度降低为原来的1/5.3,这为转镜的速度控制提供更大不稳定裕度,同时也提高了FTIR的抗振能力。该数值模拟仿真分析结果为实现无参考激光的便携式高速FTIR的设计参数确定和优化提供数据支持和理论依据。     

拼接菲涅耳透镜子镜失调误差分析

大口径菲涅耳透镜由多个子镜拼接而成,子镜失调误差会影响拼接菲涅耳透镜的成像质量,以瑞利判据作为评价标准,根据菲涅耳透镜波前像差理论,分析了拼接菲涅耳透镜子镜各个自由度失调误差公差允限,给出了理论计算公式。分析表明:拼接菲涅耳透镜F数越大,各自由度失调误差公差允限越宽松。采用Zemax软件进行理论仿真,利用干涉仪对拼接波前进行实验检测,检测结果显示,拼接波前与理论计算最大误差为0.006λ,验证了理论的正确性。分析结果为拼接菲涅耳透镜光机设计、检测与装调提供了理论依据与指导。     

用于地基望远镜的高分辨率倾斜镜设计

根据多镜面地基望远镜在近红外实现共相衍射极限成像的需求,提出了一种基于压电堆栈致动器的高分辨率倾斜镜设计方案。该方案以哑铃型柔性铰链和菱形位移缩小结构(RADS)作为倾斜镜的运动传递元件,压电堆栈致动器(PSA)作为动力元件,并使用电涡流传感器作为角度测量部件。介绍了高分辨倾斜镜的工作原理,并对哑铃型柔性铰链和菱形位移缩小结构进行设计。柔性铰链和位移缩小结构的关键结构参数均采用理论计算、实验和仿真进行优化。建立倾斜镜模型,利用理论计算和有限元仿真软件分别计算倾斜镜的倾斜角度和分辨率。实验结果表明:设计的倾斜镜角度分辨率达到0.017″,最大倾斜角度为14.6″,谐振频率为136.97 Hz,与有限元仿真结果相吻合,满足地基望远镜系统衍射极限成像的要求。     

柔性铰链机构柔节疲劳寿命的设计及研究

围绕基于迈克尔逊干涉仪傅里叶变换光谱仪的动镜支撑机构——柔性铰链机构的柔节疲劳寿命问题,先通过相关公式计算选取出机构柔节的各个参数,并由这些参数建立机构的有限元模型;然后再根据材料属性参数,利用疲劳分析软件msc.fatigue,通过拟合疲劳寿命S-N曲线来对机构的柔节参数进行仿真验证.从分析结果可知:柔节破坏点的寿命...     

A0模态Lamb波聚焦透镜的结构设计及实验研究

基于折射率的弯曲波透镜多在板结构上打孔或挖槽,这种设计破坏了原有的结构,降低了板的刚度和稳定性。鉴于此,通过在板表面镶嵌棱柱的方式设计了A0模态Lamb波的聚焦透镜。首先,详细讨论了棱柱的结构参数对Lamb波带隙的影响机理,获取了波速与结构尺寸的定量关系,并实现了透镜的结构设计;其次,有限元仿真了该聚焦透镜的工作性能,包括聚焦位置、焦点处能量分布、聚焦尺寸、工作带宽等;最后,通过实验验证了该透镜设计的正确性。研究结果表明,设计的透镜能够使弯曲波聚焦在预先设定位置,且在不改变结构参数的情况下具有一定的工作频率带宽。该透镜设计方法具有聚焦性能优越、刚度强、易于加工等优点,为声聚焦透镜在无损检测、能量收集等领域的实际应用提供了参考。     

同步辐射压弯准直镜姿态的检测--大曲率半径小口径光斑的波前检测

提出了利用微小楔角剪切干涉仪测量同步辐射压弯准直镜姿态的方法。利用透镜和针孔产生与同步辐射发散度相同的激光束。通过剪切干涉仪．测量经压弯准直镜输出激光束的平行度,可将准直镜的位置、俯仰角度和镜面曲率皆调整到最佳。该剪切干涉仪结构简单,可根据条纹图样判断光束的平行度,每一幅干涉条纹图样与准直镜的一种姿态对应,因而这种方法能确定准直镜表面各点反射X射线的整体效果。该方法适用于测量波前曲率半径大竖直口径小的光束,不但精度高．而且具有实用价值。     

一种球面透镜波前畸变的绝对检测方法

球面透镜的透射波前畸变是影响激光驱动器光束质量的重要参数。采用移相干涉仪检测球面透镜波前畸变时,测量结果的精度受限于标准球面镜头和后置平面反射镜的精度。然而,现有的绝对检测技术仅适用于反射元件。为了满足球面透镜波前畸变的高精度检测需求,提出了一种适用于球面透镜透射波前的绝对检测方法:三位置 平移相减法。详细介绍了三位置 平移相减法的原理,对其进行了模拟仿真和实验验证。仿真结果显示:三位置 平移相减法的仿真误差为10 nm~13 nm,达到高精度测量的理论要求;实验结果表明:三位置 平移相减法可以有效地减小前标准球面镜头和后置平面反射镜对测量结果的影响,该方法对球面透镜的加工和装调具有很好的指导意义。     

300mm平面标准镜装卡结构的关键参数

为了实现大口径平面标准镜的高精结构装卡,对其在重力作用下的面形变化进行了研究。首先,对结构胶的有限元建模进行了理论分析,建立了大口径平面标准镜胶结装卡结构有限元模型。然后,分析了不同胶点数量及分布、不同胶接面积以及不同镜框支撑方式等关键结构参数对参考面面形的影响。最后,设计了大口径平面标准镜胶结及支撑的结构。结果表明,采用胶点直径为5 mm,12×3胶点分布形式胶结时,参考面面形的PV值为24.06 nm,RMS值为6.78 nm,满足了大口径平面标准镜面形精度的要求。     

300mm平面标准镜装卡结构的关键参数

为了实现大口径平面标准镜的高精结构装卡,对其在重力作用下的面形变化进行了研究。首先,对结构胶的有限元建模进行了理论分析,建立了大口径平面标准镜胶结装卡结构有限元模型。然后,分析了不同胶点数量及分布、不同胶接面积以及不同镜框支撑方式等关键结构参数对参考面面形的影响。最后,设计了大口径平面标准镜胶结及支撑的结构。结果表明,采用胶点直径为5 mm,12×3胶点分布形式胶结时,参考面面形的PV值为24.06 nm,RMS值为6.78 nm,满足了大口径平面标准镜面形精度的要求。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.