一种新的单幅条纹图的相位解调方法

基于非载波条纹图的条纹灰度分布的极值准确定位,提出了一种新的由单幅条纹图解调相位方法.该方法首先准确定位每个条纹灰度的极值包括最大和最小,再基于极值图将条纹的强度值分布线性地变换到-1和1之间,最后利用arcos反余弦取代传统的atan2反正切算法求出相位,结合极值图就能快速准确地解调出含有封闭条纹的条纹图相位.本方法仅用一幅条纹图,不需要传统的条纹定级和对分数级条纹插值与拟合,自动判别条纹相位变化的波谷,准确获得条纹相位分布.这一方法使光测法研究动态和瞬态问题成为可能,而不需引入载波法调制条纹.文中通过实例说明了本方法的处理过程.     

一种基于傅里叶变换的分析载波条纹的新方法

针对传统傅里叶变换法处理光载波干涉条纹图时会有边缘效应产生的问题,提出了一种基于傅里叶变换法的外推延拓方法,并从理论上进行了数学推导。为了验证这种方法的正确性,分别对一维数字信号和二维空间载波条纹图进行了数值模拟,进一步分析了误差产生的原因,并与传统的傅里叶变换法对比。结果表明该法可以有效抑制传统傅里叶变换法处理光载波干涉条纹图时边缘效应所造成的较大误差,在基于空间域相位调制技术的波面干涉测量中,对空间载波条纹图进行处理,可以使相位的计算精度达到3.3 mrad。     

基于条纹中心线的载波散斑条纹解调方法

针对传统傅里叶变换法在处理含有多突起的载波散斑条纹图时,由于存在频谱展宽会出现严重的解调相位失真,提出了一种基于条纹中心线的载波散斑条纹解调方法.根据载波调制时所采用平行调制方式和倾斜调制方式,分别从理论上对相关的中心线解调法进行数学推导,并进一步采用最小二乘三次曲面拟合法获得被测物面全场的离面位移信息.实验结果表明:利用上述中心线解调法和曲面拟合法能解调出复杂的载波条纹图,并获得具有亚像素定位准确度、连续光滑的全场离面位移信息.     

干涉条纹的高准确度傅里叶变换分析

提出了一种可用于干涉条纹傅里叶变换分析的空间载波频率估计方法.通过干涉条纹的加窗切趾处理及旁瓣质心坐标的计算,得到空间载波频率的高准确度估计.基于傅里叶变换的位移定理,用估计的空间载波频率实现了载频的移除.模拟和实验结果表明此方法可以有效地抑制传统干涉条纹傅里叶变换分析中的载频移除误差和频谱泄漏误差.     

基于调制方向提取载波散斑条纹中心线的方法

条纹中心线法是一种重要的电子散斑干涉条纹解调方法,其前提条件是获得高准确度的条纹中心线.本文在分析载波电子散斑干涉条纹自身特征的基础上,提出了一种基于载波条纹调制方向提取条纹中心线的方法.该方法首先通过同态滤波有效滤除高频乘性散斑噪音,提取出载波条纹;然后应用基于调制方向提取中心线算法确定载波条纹灰度极值点并做二值化处理;再采用基于中心线拟合或者基于条纹间距的边沿中心线补偿法,获得完整的条纹中心线图.实验结果表明:该方法简单、可靠,能快速、准确地提取出连续的中心线.     

基于调制方向提取载波散斑条纹中心线的方法

条纹中心线法是一种重要的电子散斑干涉条纹解调方法,其前提条件是获得高准确度的条纹中心线.本文在分析载波电子散斑干涉条纹自身特征的基础上,提出了一种基于载波条纹调制方向提取条纹中心线的方法.该方法首先通过同态滤波有效滤除高频乘性散斑噪音,提取出载波条纹;然后应用基于调制方向提取中心线算法确定载波条纹灰度极值点并做二值化处理;再采用基于中心线拟合或者基于条纹间距的边沿中心线补偿法,获得完整的条纹中心线图.实验结果表明:该方法简单、可靠,能快速、准确地提取出连续的中心线.     

一种改进的载波电子散斑干涉处理方法

提出了一种新的载波电子散斑干涉的处理方法,该方法将载波所形成的直条纹和包含物体变形信息的弯曲条纹在频域直接比较, 避免了传统载波干涉方法中的载波频率计算和由此带来的误差. 因此在准确程度和方便性方面都有明显改进. 本文在给出理论分析的同时进行了实验验证.     

载波相移云纹干涉法研究

通过对载波技术研究,提出载波相移云纹干涉法.采用该方法可以实现云纹干涉条纹信息的自动识别.给出了灵敏度和载波频率的定量关系式;同时,对载波数字相移云纹干涉法测试的精度进行了系统分析.     

部分相干光栅衍射效应和干涉术

本文提出一种新的部分相干照明的光栅衍射干涉仪.先分析了光栅的介于Talbot和Lan效应之间的部分相干衍射效应.部分相干干涉图的特点是条纹由频率成倍的两种光栅状载波所表征.调整光源狭缝,系统在两相干性极端分别转成Talbot和Lau干涉仪.理论分析采用了模糊函数方法.最后给出了实验.     

载波相移云纹干涉法研究

通过对载波技术研究,提出载波相移云纹干涉法,采用该方法可以实现云纹干涉条纹信息的自动识别,给出了灵敏度和载波频率的定量关系式;同时,对载波数字相移云纹干涉法测试的精度进行了系统分析。     

基于结构光投影的二维S变换轮廓术

S变换是一种集合了窗口傅里叶变换和小波变换优点的时频分析技术,目前一维S变换已成功应用于结构光投影的条纹相位解调中。由于二维S变换可以对图像在两个方向上进行时频分析,具有更优于一维S变换的分析和处理能力。为了完善S变换的条纹相位解调理论,将二维S变换方法引入到基于结构光投影的三维光学测量中,研究了二维S变换在条纹相位解调中的原理及应用,给出了详尽的理论分析,并同一维S变换结果进行了比较。模拟和实验都表明,在条纹图解相中,二维S变换比一维S变换提取的相位精度更高,即使在存在较严重噪声污染的情况下也表现出良好的可靠性,体现出二维S变换提取相位的优势。     

Fringe pattern analysis by S-transform

S-transform proposed in 1996 by Stockwell R.G is a simple and popular technique for the time–frequency analysis. It has been introduced in optical three-dimensional shape measurement, recently. In this paper, a study about applications of S-transform in the demodulation of deformed fringe patterns is performed. We focus on discussing not only the S-transform spectrum filtering technique, the S-transform ridge technique and the phase gradient calculation method based on S-transform used in fringe pattern demodulation, but also the phase unwrapping technique. In addition, a generalized S-transform was introduced to analyze fringe patterns, which is helpful to improve the measurement accuracy and flexibility of the method based on S-transform. The reconstruction results based on S-transform were compared with that on wavelet transform and windowed Fourier transform in fringe analysis.     

用于三维测量的快速相位解包裹算法

减少条纹投影轮廓术的条纹图数量一直是本领域的研究热点。传统的时间相位解包裹算法,一般需要额外的条纹信息来确定条纹级次,导致条纹图数量过多。提出一种用于三维测量的快速相位解包裹算法,只需要N步标准相移正弦条纹图,就可以完成绝对相位的计算。首先,利用标准相移算法计算包裹相位和消除背景的掩膜;然后,直接利用包裹相位和掩膜,根据连通域标记算法计算条纹级次,进而求得绝对相位。该方法最少只需3幅条纹图,就可以完成三维测量,数据处理速度快。计算机仿真和实验结果验证了该方法的有效性和鲁棒性。     

条纹图象的数字化自动分析处理技术之一:条纹中心法

条纹中心法是光学条纹图象数字化自动分析处理的重要方法之一.本文全面地介绍了条纹中心法技术分析处理光学条纹图象的详细过程,并对条纹中心的提取、条纹级数的确定与插值等关键技术做了重点说明.文章最后讨论了光学条纹图象数字化自动分析处理软件的编制.     

Applications of windowed Fourier fringe analysis in optical measurement: A review

The applications of windowed Fourier fringe analysis in the past decade are reviewed. Because fringe patterns from different optical measurement systems are similar, the reviewed applications are classified according to the functions of the windowed Fourier transform being used in fringe pattern analysis: denosing exponential phase fields, demodulating carrier fringe patterns, getting phase derivatives, and utilizing local properties. From these applications, the windowed Fourier transform is shown to be effective and versatile for fringe pattern analysis.     

Moiré interferometric fringe patterns about crack tips: Experimental observations and numerical simulation

The local deformation about fatigue cracks has been investigated by the coherent optics method of moiré interferometry. The complexity of the interference fringe patterns motivated the parallel development of companion numerical models for simulating moiré interferometric response for known boundary conditions. Experimental patterns are here examined in the light of computer-generated fringe systems for a stationary crack in elastic as well as elastic-plastic solids. Various effects due to material plasticity, specimen-dependent non-singular stress, and mixed mode loading are identified in the fringe patterns.     

Automatic fringe pattern analysis: A review

The wide availability of digital image processing equipment has led to the development of a large number of techniques for analysing interference fringe patterns. Concentrating on the most recent developments in the field, this paper presents a cross-section of techniques and applications of automatic and interactive fringe pattern analysis. The paper also describes some of the ways in which prior knowledge of the fringe pattern characteristics can be used to simplify the analysis procedure.     

Three-dimensional Fourier Fringe Analysis

Over the years two-dimensional Fourier Fringe Analysis (2D-FFA) has demonstrated both its capability and its relative robustness in analysing fringe patterns within a short time-frame from static objects. Nowadays, there is an increasing demand to measure dynamic objects. Today 2D-FFA is seen as a fast and flexible method of processing fringe patterns for dynamic objects. But it is still inherently a 2D approach, i.e. it deals with three-dimensional data (video sequences) on an individual 2D frame-by-frame basis. In this paper, a novel three-dimensional Fourier Fringe Analysis (3D-FFA) algorithm is proposed to demodulate fringe pattern sequences taken from dynamic objects. This technique processes the stack of fringe patterns as a single 3D volume, not as a set of individual 2D frames that are each processed in isolation. The proposed algorithm has been evaluated on both computer simulated and real dynamic objects. Results show that the proposed technique is able to demodulate fringe pattern volumes successfully.     

Homomorphic partial differential equation filtering method for electronic speckle pattern interferometry fringes based on fringe density

Noise reduction is one of the most exciting problems in electronic speckle pattern interferometry. We present a homomorphic partial differential equation filtering method for interferometry fringe patterns. The diffusion speed of the equation is determined based on the fringe density. We test the new method on the computer-simulated fringe pattern and experimentally obtain the fringe pattern, and evaluate its filtering performance. The qualitative and quantitative analysis shows that this technique can filter off the additive and multiplicative noise of the fringe patterns effectively, and avoid blurring high-density fringe. It is more capable of improving the quality of fringe patterns than the classical filtering methods.