Luminescence properties of BaAl₁₂O₁₉:Tb,Ce and energy transfer between Ce³⁺,Tb³⁺

BaAl12O19:Tb,Ce phosphors were prepared by sol-gel technique,the crystalline structures of samples characterized by XRD,and the luminescence properties and energy transfer between Ce3+ and Tb3+ were investigated.The results indicated that the emission intensity and the excitation wavelength range of Tb3+ increased when Ce3+ was doped.It demonstrated that the Ce3+ added in the BaAl12O19:Tb could deliver energy to Tb3+,and Ce3+ was not luminous by itself.The relative emission intensity of Tb3+ at wavelength of 548 nm was the strongest by Tb3+/Ce3+ ratio of 2:1,when excited at 310 nm,which was the characteristic adsorption wavelength of Ce3+.     

Intense blue-emitting Ca₂PO₄Cl:Eu²⁺ phosphor for near-ultraviolet converting white light-emitting diodes

A blue phosphor Ca2PO4Cl:Eu2+(CAP:Eu2+) was synthesized by solid state reaction.The Ca2PO4Cl:Eu2+ exhibited high quantum efficiency and excellent thermal stability.The luminescent intensity of Ca2PO4Cl:Eu2+ was found to be 128% under excitation at 380 nm,149% under 400 nm,and 247% under 420 nm as high as that of BaMgAl10O17:Eu2+.The optimal doping concentration was observed to 11 mol.% of CAP:Eu2+.The energy transfer between Eu2+ ions in CAP were occurred via electric multipolar interaction,and the critical transfer distance was estimated to be 1.26 nm.A mixture of blue-emitting Ca2PO4Cl:Eu2+,green-emitting(Ba,Sr)2SiO4:Eu2+ and red-emitting CaAlSiN3:Eu2+ phosphors were selected in conjunction with 400 nm chip to fabricate white LED devices.The average color-rendering index Ra and correlated color temperature(Tc) of the white LEDs were found to be 93.4 and 4590 K,respectively.The results indicated that it was a promising candidate as a blue-emitting phosphor for the near-UV white light-emitting diodes.     

Synthesis and characterization of CaAl_xO_y:Eu²⁺ phosphors prepared using solution-combustion method

Europium-doped calcium aluminate(CaAlxOy:Eu2+) phosphors were obtained at low temperatures(500 oC) by the solution-combustion of corresponding metal nitrate-urea solution mixtures.The particle size and morphology and the structural and luminescent properties of the as-synthesized phosphors were examined by means of scanning electron microscopy(SEM),X-ray diffraction(XRD),Auger spectroscopy,transmission electron spectroscopy(TEM) and photoluminescence(PL).It was found that the Ca:Al molar ratios showed greatly influence not only on the particle size and morphology,but also on their PL spectra and structure.With the Ca:Al molar ratios increasing from 6:100 to 26:100,the structure of as-synthesized phosphor changed from CaAl12O19 to monoclinic CaAl2O4 and the dominant emitting light from red to blue,implying that the oxidation state of doped europium ions changed from trivalent to divalent due to the structure variation of host lattice.A blue phosphor with almost pure phase can be easily prepared by solution combustion method with suitable Ca:Al molar ratio.     

Optimization of BaMgAl₁₀O₁₇:Eu²⁺ phosphors by the substitution of Si-N bonds for Al-O bonds

We proposed a simple method to improve the thermal stability of BaMgAl10O17:Eu2+(BAM) phosphors by the substitution of Si-N bonds for Al-O bonds in the host lattice.Both photoluminescence properties and thermal stability under ultraviolet(UV) and vacuum ultraviolet(VUV) excitation could be significantly improved through Si-N incorporation.After thermal degradation at 600 °C for 1 h in air atmosphere,the Si-N doped sample(Ba0.88Eu0.12MgAl9.97Si0.03O16.97N0.03) had the highest emission intensity which was 22% and 40% stronger than that of as-received sample under UV and VUV excitation,respectively.This could be attributed to the stable local structure surrounding the Eu2+ ions and the lower electronegativity of nitrogen.     

Electrospinning synthesis and luminescent properties of Lu₂O₃:Eu³⁺ nanofibers

One-dimensional Lu2O3:Eu3+ nanofibers were prepared by electrospinning followed by high-temperature calcinations.Thermogravimetric and differential thermal analysis,X-ray powder diffraction,Fourier transform infrared spectroscopy,scanning electron microscopy,photoluminescent spectra and decay curves were used to characterize the samples.Results showed that samples began to crystallize at ～500 oC and crystallized completely around 1000 oC.The average diameter of nanofibers(1000 oC annealed) was about 55 nm and the particle size of Lu2O3:Eu3+ increased with increasing annealing temperature.Under ultraviolet excitation,nanofibers exhibited typical red emission of Eu3+ in Lu2O3.The effect of heat-treatment temperature on luminescent properties of nanofibers was also discussed.     

Synthesis of Long Afterglow Phosphors MAl2O4:Eu2+, Dy3+(M=Ca, Sr, Ba) by Microemulsion Method and Their Luminescent Properties

Long afterglow phosphors MAl2O4:Eu2 , Dy3 (M=Ca, Sr, Ba) were synthesized by microemulsion method, and their crystal structure and luminescent properties were compared and investigated. XRD patterns of samples indicate that phosphors CaAl2O4:Eu2 , Dy3 and SrAl2O4:Eu2 , Dy3 are with monoclinic crystal structure and phosphor BaAl2O4:Eu2 , Dy3 is with hexagonal crystal structure. The wide range of excitation spectrum of phosphors MAl2O4:Eu2 , Dy3 (M=Ca,Sr,Ba) indicates that the luminescent materials can be excited by light from ultraviolet ray to visible light and the maximum emission wavelength of phosphors MAl2O4:Eu2 , Dy3 (M=Ca, Sr, Ba) is found mainly at λem of 440 nm (M=Ca), 520 nm (M=Sr) and 496 nm (M=Ba) respectively, the corresponding colors of emission light are blue, green and cyna-green respectively. The afterglow decay tendency of phosphors can be summarized as three processes: initial rapid decay, intermediate transitional decay and very long slow decay. Afterglow decay curves coincide with formula I=At-n, and the sequence of afterglow intensity and time is Sr＞Ca＞Ba.     

Controlled synthesis and tunable luminescence of NaYF₄:Eu³⁺

High quality NaYF4:Eu3+ luminescent materials were successfully synthesized via a facile template technique by hydrothermal method.The samples were characterized by X-ray powder diffraction(XRD),transmission electron microscopy(TEM) and fluorescence spectroscopy(FS).The incorporating of Eu3+ ions into NaYF4 crystal lattice influenced the symmetry types of NaYF4 crystals,resulting in phase transformation of NaYF4 crystals between α and β phase.The pure hexagonal phase of branched NaYF4:Eu3+ was obtained as the Eu3+ concentration reached 15 mol.%.In addition,the luminescence color was tuned by changing the doping concentration of Eu3+ ions.     

Luminescent properties of Eu³⁺-doped BaZrO₃ phosphor for UV white light emitting diode

A novel orange phosphor Eu3+ doped barium zirconate(BaZrO3) was synthesized by conventional solid state reaction method and its crystal structure and luminescent properties were investigated in this paper.The X-ray diffraction patterns(XRD) showed that simple BaZrO3 phase was obtained.Monitoring at 596 nm,the excitation spectrum consisted of a broad band and a series of narrow bands and the stronger excitation peaks located at 275 and 393 nm,respectively.The emission spectrum excited by 393 nm UV light was composed of four narrow bands.The strongest emission was located at 596 nm.The appropriate concentration of Eu3+ was 0.025(molar fraction) for the highest emission intensity at 596 nm.The H3BO3 and ammonium were added as flux and the results showed that 2 wt.% NH4F ions was the optimal flux for BaZrO3:Eu3+.     

Size dependence of up-conversion luminescence of NaYF₄:Yb³⁺/Tm³⁺

Tm3+/Yb3+ codoped NaYF4 microcrystals were synthesized using a hydrothermal method.The bright upconversion light was observed under 980 nm excitation.The upconversion luminescence was systematically investigated at different Yb3+ concentrations and different reaction temperatures and time.The sample with 60% Yb3+ concentration and reacting at 180 oC for 24 h possessed the highest luminescent efficiency.The higher luminescent efficiency was contributed to a large surface area.The large surface area induced the large vibration mode by absorbed H2O and CO2.The larger vibration mode could enhance the energy transfer efficiency from the excited Yb3+ to Tm3+ by the process of phonon assisted energy transfer.     

Properties of red-emitting phosphors Sr2MgSi2O7:Eu3+ prepared by gel-combustion method assisted by microwave

Novel red-emitting phosphors Sr2MgSi2O7:Eu3+ were prepared by gel-combustion method assisted by microwave. The phase struc-ture and luminescent properties of as-synthesized phosphors were investigated by XRD and fluorescence spectrophotometer, respectively. The results showed that the as-synthesized sample was Sr2MgSi2O7 with tetragonal crystal structure. The excitation spectrum of Sr2MgSi2O7:Eu3+ was composed of two major parts: one was the broad band between 200 and 350 nm, which belonged to the charge transfer of Eu3+-O2-; the other consisted of a series of sharp lines between 350 and 450 nm, ascribed to the f-f transition of Eu3+. The emission spec-trum consisted of two emission peaks at 593 and 616 nm, which was attributed to 5D0→7F1 and 5D0→7F2 of Eu3+, respectively. The concen-tration of Eu3+ (x) had great effect on the emission intensity of Sr2-xMgSi2O7:Eu3+x. When x varied in the range of 0.04-0.18, the intensity of emission peaks at 593 and 616 nm increased gradually with the concentration of Eu3+ increasing. It was interesting that no concentration quenching occurred. Moreover, the luminescent intensity could be greatly enhanced with incorporation of charge compensator Li+ ions.     

Hydrothermal synthesis,structure study and luminescent properties of YbPO₄:Tb³⁺ nanoparticles

YbPO4:Tb3+ were synthesized by mild hydrothermal method.The luminescent properties,morphologies and structure of the obtained powders were characterized by photoluminescence(PL) spectra,FESEM,X-ray diffractometer(XRD) and FTIR.The results showed that the prepared YbPO4:Tb3+ nanoparticles were pure tetragonal phase and the average grain size varied with increasing of Tb3+ concentration.Hydrothermal temperature was revealed to be the key factor to enhance the emission intensity of YbPO4:Tb3+ phosphors.The spherical nanoparticles could be effectively excited by near UV(369 nm) light and exhibited green performance at 543 nm(5D4→7F5),489 nm(5D4→7F6) and 586 nm(5D4→7F4).The CIE chromaticity was calculated to be x=0.298,y=0.560.The YbPO4:Tb3+ nanoparticles exhibited potential to act as UV absorber for solar cells to enhance the conversion efficiency.     

Blue-green BaAl_2O_4：Eu~（2＋）,Dy~（3＋） phosphors synthesized via combustion synthesis method assisted by microwave irradiation

Blue-green luminescent BaAl2O4:Eu2+,Dy3+ phosphor powders were synthesized via combustion synthesis method assisted by microwave irradiation in air. The phosphors were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and fluorescence spectrophotometer. The XRD results revealed that when the concentration of urea was over 3 times higher than theoretical quantities, a BaAl2O4 single hexagonal phase was obtained. The SEM results revealed that the surface of the BaAl2O4:Eu2+,Dy3+ pow...     

Photoluminescence study of SiO₂ coated Eu³⁺:Y₂O₃ core-shells under high pressure

Uniform core-shell Eu3+:Y2O3/SiO2 spheres were synthesized via precipitation and the Stber method.The structural transition of core-shell Eu3+:Y2O3/SiO2 was studied by using high pressure photoluminescence spectra.With pressure increasing,the emission intensities of 5D0→7F0,1,2 transitions of Eu3+ ions decreased and the transition lines showed a red shift.The relative luminescence intensity ratio of 5D0→7F2 to 5D0→7F1 transitions decreased with increasing pressure,indicating lowering asymmetry around Eu3+ ions.During compression,structural transformation for cores in the present core-shell Eu3+:Y2O3/SiO2 sample from cubic to monoclinic took place at 7.5 GPa,and then the monoclinic structure turned into hexagonal above 15.2 GPa.After the pressure was released,the hexagonal structure transformed back to monoclinic and the monoclinic structure was kept stable to ambient pressure.     

Facile synthesis of visible light excited La_1-xGd_xF₃:Eu³⁺ micro-meter sphere using polyvinylpyrrolidone as a template

Lanthanide fluorides exhibited unique luminescent properties in terms of their low phonon energy can restrict the luminescence quenching and extend luminescent lifetimes.Here,a room-temperature co-precipitation method was used to synthesize europium(III) activated La1-xGdxF3 solid phosphors.X-ray diffraction(XRD) data confirmed the crystalline phases of synthesized sample belongs to orthorhombic system.All the as-derived materials exhibited red luminescence(5D0→7F1) under the excitation at longer wavelengths(394 and 466 nm).The powder with the most intense emission was achieved in terms of 10 mol.% doping concentration(Eu content,La/Gd=1/9) and sample sintered at 700 oC.Scanning electron microscopy(SEM) investigated the morphology and crystalline of the samples,showing that many regular and large balls(5-10 μmol/L) were dispersed within the micro-meter scale composites.We proved that the above crystal growth structures were controllable and predicable based on the surface functionalization by polyvinylpyrrolidone ligand.     

Effects of Sr2+ on structure and luminescent properties of BaAl12O19:Eu phosphors

Ba_0.9-ySr_yAl₁₂O₁₉:Eu_0.1 phosphors were prepared by sol-gel technique, the crystalline structures of samples characterized by XRD, and the luminescence properties were investigated. The influence of crystallographic positions on the luminescent properties of Sr²⁺-doped BaAl₁₂O₁₉:Eu was investigated in detail. The results indicated that the crystal lattice of BaAl₁₂O₁₉:Eu was not influenced by the Sr²⁺ and doping Sr²⁺ in BaAl₁₂O₁₉:Eu enhanced the luminescent properties of the phosphors at the proper concentration of Sr²⁺. With the increasing of concentration of Sr²⁺ doped in BaAl₁₂O₁₉:Eu, the relative luminescent intensity of Ba_0.9-ySr_yAl₁₂O₁₉:Eu_0.1 strengthened and blue-shifted.     

Energy transfer mechanism of Sr_4Al_(14)O_(25):Eu~(2+) phosphor

Long lasting blue-green-emitting Sr4Al14O25:Eu2+ phosphors were synthesized by solid-state reactions.The phosphors were investigated by X-ray diffraction(XRD) and fluorescence spectrophotometer.A pure phase of Sr4Al14O25:Eu2+ phosphor was obtained at 1250 °C.There are two different types of Eu emission centers in Sr4Al14O25:Eu2+ phosphor.The effects of the Eu2+ concentration and the reducing temperature on the distribution of Eu2+ among different sites were investigated.The energy transfer mechanism between two different emission centers was elucidated via the investigation of thermal damage influence on the phosphorescence spectra,that is,the energy emitted from an Eu1 emission center could be reabsorbed by an Eu2 emission center.     

Pressure effect on optical properties and structure stability of LaPO₄:Eu³⁺ hollow spheres

Uniform monoclinic monazite structure LaPO4:Eu3+ hollow spheres were s ynthesized via an attractive hydrothermal method owing to the higher yield and s implicity.Photoluminescence and Raman spectra of the sample were investigated u nder high pressure up to 26 GPa using diamond anvil cells.At ambient pressure,the sample exhibited same luminescent properties with that of bulk monazite LaPO 4:Eu3+.With the increase of pressure,the emission intensity of Eu3+ decreased and the half-widths of transition lines increased,while emission peaks showed a red shift toward longer wavelengths due to increase in crystal-field strength.No phase transformation appeared before amorphization for monoclinic LaPO4:Eu3+ hollow spheres,which was confirmed based on the analysis of high pressure Raman spectra.The large surface energy of hollow spheres was proposed to prevent the occurrence of phase transformation.     

助熔剂对BAM∶Eu2+荧光粉合成机理和发光强度的影响

采用高温固相法制备了BaMgAl10O17∶Eu2+(BAM∶Eu2+)蓝色荧光粉,采用X射线衍射、扫描电子显微镜和荧光光谱等手段,考察了不同助熔剂以及反应对BAM∶Eu2+晶体结晶度、物相纯度、粉体颗粒形貌和发光强度的影响,并对合成反应的机理进行了分析。结果表明,采用不同的助熔剂,均能制备出BAM∶Eu2+发光材料,Eu2+的掺入对基质晶体结构没有明显的影响;相对不加助熔剂时,烧结温度大幅度降低,且制备的样品形貌更规整、颗粒大小更趋均一;随着烧结时间的延长,样品结晶更趋完整、杂相减少,粉体发光强度随之提高;随助熔剂用量的增加,粉体的发光性能得到改善,但助熔剂用量过量时,粉体结块、团聚,粉体的发光性能变差;采用不同的助熔剂,合成反应的机理发生变化,所得样品的结晶完整性、杂相组成和含量、发光中心的分布、粉体料径等性能产生相应变化,最终导致样品的发光性能发生改变,样品的特征发射峰强度随AlF3、H3BO3、MgF2、Li2CO3、无助熔剂依次降低。     

Preparation and luminescence properties of Eu²⁺-doped CASN-sinoite multiphase system for LED

A series of Eu2+-doped CASN-sinoite multiphase system with a formula of(CaAlSiN3)(1-x)-(Si2N2O)x were successfully synthesized by the high temperature solid-state method.The crystal structure and morphology of the phosphors and their photoluminescence(PL) were investigated.For the Eu2+-doped samples the PL intensity approached its maximum when the molar ratio of Si2N2O in the samples was about 0.15.With increase of the concentration of Si2N2O,the emission peak shifted from 645 to 605 nm.It was because the spectroscopic polarizability(αsp) became smaller with the increase of Si/Al ratio or the adding of O atoms,which caused the change of crystal field strength.In addition,the full width at half maximum(FWHM) widened with the increase of x value,which was favor of the improvement of the color rendering index.     

Ba1-xSrxMgSiO4:Eu2+,Mn2+: A novel tunable single-matrix tricolor phosphor for W-LED

The Ba1-xSrxMgSiO4:Eu2+,Mn2+ phosphors were prepared by solid-state reaction. Their photoluminescence properties were inves-tigated with fluorescence spectrum and CIE chromaticity. The emission color of Eu2+ in Ba0.98-xSrxMgSiO4:0.02Eu2+ could be tuned from green to blue by adjusting the content of Sr2+. The blue emission of Eu2+ overlapped well with the excitation spectra of Mn2+, leading to an ef-ficient energy transfer from Eu2+ to Mn2+ in Ba0.98-xSrxMg1-ySiO4:0.02Eu2+,yMn2+. Ba0.93Sr0.03Mg1-ySiO4:0.02Eu2+,yMn2+ could emit three ef-ficient broad bands at 440, 530 and 640 nm. The emission color of Ba0.93Sr0.03Mg1-ySiO4:0.02Eu2+,yMn2+ could be tuned from greenish blue to yellowish white by increasing the content of Mn2+ from 0 to 0.1. By changing the content of Sr2+/Mn2+, white-light with different hues could be conveniently obtained in the Ba1-xSrxMgSiO4:Eu2+,Mn2+ phosphors. The results showed that Ba1-xSrxMgSiO4:Eu2+,Mn2+ is a promising single-phased tricolor phosphor in the fabrication of W-LED.