Effect of clay modification on the morphological,mechanical, and thermal properties of polyamide 6/polypropylene/montmorillonite nanocomposites

Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 4 phr (parts per hundred resin) of organophilic montmorillonite (OMMT) were prepared by melt compounding. The sodium montmorillonite (Na‐MMT) was modified using three different types of alkyl ammonium salts, namely dodecylamine, 12‐aminolauric acid, and stearylamine. The effect of clay modification on the morphological and mechanical properties of PA6/PP nanocomposites was investigated using x‐ray diffraction (XRD), transmission electron microscopy (TEM), tensile, flexural, and impact tests. The thermal properties of PA6/PP nanocomposites were characterized using thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and heat distortion temperature (HDT). XRD and TEM results indicated the formation of exfoliated structure for the PA6/PP nanocomposites prepared using stearylamine modified montmorillonite. On the other hand, a mixture of intercalated and exfoliated structures was found for the PA6/PP nanocomposites prepared using 12‐aminolauric acid and dodecylamine modified montmorillonite. Incorporation of OMMT increased the stiffness but decreased the ductility and toughness of PA6/PP blend. The PA6/PP nanocomposite containing stearylamine modified montmorillonite showed the highest tensile, flexural, and thermal properties among all nanocomposites. This could be attributed to better exfoliated structure in the PA6/PP nanocomposite containing stearylamine modified montmorillonite. The storage modulus and HDT of PA6/PP blend were increased significantly with the incorporation of both Na‐MMT and OMMT. The highest value in both storage modulus and HDT was found in the PA6/PP nanocomposite containing stearylamine modified montmorillonite due to its better exfoliated structure. POLYM. COMPOS., 31:1156–1167, 2010. © 2009 Society of Plastics Engineers     

Enhanced mechanical properties and fire retardancy of polyamide 6 nanocomposites based on interdigitated crystalline montmorillonite–melamine cyanurate

Polyamide 6 (PA6)–montmorillonite (MMT)–melamine cyanurate (MCA) nanocomposites were prepared by the incorporation of interdigitated crystalline MMT–MCA. Their morphologies were assessed by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, thermal stability measurement by thermogravimetric analysis, mechanical properties measurement by tensile tests, and fire retardancy measurement by limiting oxygen index testing and vertical burning testing (UL‐94). The results indicate that MMT–MCA was homogeneously nanodispersed in PA6. Compared with PA6–MCA, the PA6–MMT–MCA nanocomposites showed enhanced thermal stability. The mechanical properties and fire retardancy show that the PA6–MMT–MCA nanocomposites with 5 wt % total loading of MMT–MCA reached UL‐94 V‐2 rating (3.2 mm) and significantly increased the tensile strength of PA6 up to 24.8 % with only 1 wt % MMT in PA6. Through the control the weight ratio of MMT and MCA in MMT–MCA, the Young's modulus of PA6 could be adjusted in a very wide range (300–1100 MPa) because of the dual role of the rigid MMT and nonrigid MCA layers. The reinforced mechanism of the mechanical properties was also investigated. Consequently, the PA6–MMT–MCA nanocomposites with a good nanodispersing ability, improved thermal stability, excellent mechanical properties, and good flame retardancy were obtained and could provide broad prospects for wider applications for PA6 materials. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46039.     

Flame retardancy and mechanical properties of polyamide 6 with melamine polyphosphate and ionic liquid surfactant‐treated montmorillonite

The mechanical properties and inflammability of polyamide 6 (PA6) nanocomposites incorporated with Montmorillonite organoclay (MMT) modified with thermal stable ionic liquid surfactants were investigated. The compatibility between ionic liquid‐treated MMT and PA6 matrix was improved and the intercalation morphology was achieved, which resulted in the increaseof tensile modulus. However, the addition of organo‐MMTs alone did not improve the inflammability of the PA6 nanocomposite, because of strong melt‐dripping behavior of PA6 matrix. Addition of auxiliary melamine polyphosphate (MPP) intumescent flame retardant to the nanocomposite prevented the melt dripping and enhanced inflammability performance. The enhanced inflammability of PA6/organoclay/MPP nanocomposites was attributed to the synergistic effect between imidazolium or phosphonium organo‐MMTs and intumescent flame retardant MPP. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40648.     

Properties of water‐soluble acrylic copolymer/montmorillonite nanocomposites for warp sizing

Acrylic copolymer/montmorillonite (MMT) nanocomposites for warp sizing were prepared in the presence of Na⁺‐MMT by the in situ intercalative polymerization of acrylic acid, acrylamide, and methyl acrylate in water solution. The properties of the solution and cast film were tested according to an application in sizing process of the nanocomposite size with various MMT contents. The results indicate that, for an exfoliated structure corresponding to the MMT content increasing to 7 wt %, the performance parameters of solution viscosity, glass‐transition temperature, and tensile strength of the film increased and the moisture sorption, abrasion loss, and elongation at break of the film decreased. When the intercalated structure of MMT was 9 wt %, the gathered MMT layers acted as a common inorganic filler in the copolymer matrix, with limited contribution to the properties of the composite. The adhesion work of the nanocomposite solution was calculated by use of the Young–Dupre relation, which showed maximum values at an MMT content of 3 wt % on the surfaces of both the polyester and cellulose films. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Bio‐based polymer nanocomposites based on layered silicates having a reactive and renewable intercalant

Soybean oil‐based polymer nanocomposites were synthesized from acrylated epoxidized soybean oil (AESO) combined with styrene monomer and montmorillonite (MMT) clay by using in situ free radical polymerization reaction. Special attention was paid to the modification of MMT clay, which was carried out by methacryl‐functionalized and quaternized derivative of methyl oleate intercalant. It was synthesized from olive oil triglyceride, as a renewable intercalant. The resultant nanocomposites were characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effect of increased nanofiller loading in thermal and mechanical properties of the nanocomposites was investigated by thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). The nanocomposites exhibited improved thermal and dynamic mechanical properties compared with neat acrylated epoxidized soybean oil based polymer matrix. The desired exfoliated nanocomposite structure was achieved when the OrgMMT loading was 1 and 2 wt % whereas partially exfoliated nanocomposite was obtained in 3 wt % loading. It was found that about 400 and 500% increments in storage modulus at glass transition and rubbery regions, respectively were achieved at 2 wt % clay loading compared to neat polymer matrix while the lowest thermal degradation rate was gained by introducing 3 wt % clay loading. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2031–2041, 2013     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

EPDM/silicone blend layered silicate nanocomposite by solution intercalation method: Morphology and properties

Ethylene–propylene–diene terpolymer (EPDM)/silicone blend nanocomposites are prepared by solution method for the first time. EPDM and silicone rubber in their 50:50 (by weight) blend is intercalated within the silicate sheets of organically modified montmorillonite. Organic modification to the pristine sodium montmorillonite (Na‐MMT) surfaces is carried out by ion‐exchange reaction using hexadecyl ammonium chloride. The incorporation of such organic functional group makes Na‐MMT hydrophobic and expands the interlayer spacing between silicate sheets. The intercalated structure of EPDM/silicone blend nanocomposites is characterized by the X‐ray diffraction. Transmission electron microscopic characterization visualized the presence of both exfoliated and intercalated layered silicate in the polymer nanocomposites. The mechanical properties of the nanocomposites show a maximum improvement in tensile strength and elongation at break of 23 and 68%, respectively, compared with EPDM/silicone blend. The dielectric measurement demonstrates the increase in relative permittivity for the nanocomposite than the pure blend. The increase in the onset temperature of the thermal degradation of nanocomposites (∼52°C) corresponding to 1 wt% decomposition indicates the enhancement of thermal stability of (EPDM)/silicone blend due to interaction with silicates. POLYM. COMPOS., 35:1834–1841, 2014. © 2014 Society of Plastics Engineers     

On the structure‐properties relationship in montmorillonite‐filled polyamide 6 nanocomposites

Polyamide 6/montmorillonite (MMT) nanocomposites were prepared by melt compounding method comprising 1–7.5 wt % of Nanomer I.24 TL or 5 and 10 wt % of Cloisite 15A organically modified nanoclays. The composite samples were characterized by synchrotron X‐ray, thermal and FT‐IR spectroscopy methods looking for changes in the micro‐ and nanostructure of both PA6 matrix and MMT reinforcement as a function of the clay content and type. These data were discussed in conjunction with the mechanical properties of the respective nanocomposites. Generally, the Young's modulus was found to increase proportionally to the clay content being the highest in samples with strong aggregation of MMT at micron length scale. The tensile strength passed through a maximum at 2.5 wt % clay load presenting a homogeneous microstructure with almost no agglomeration. Increasing the amount of MMT produced less crystalline PA6 matrices, richer in γ‐PA6 polymorph and resulted in larger long spacings of PA6 due to expansion of both crystalline and amorphous domains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Preparation of a novel stabilizer and its thermal‐oxidative stabilization effect on polyamide 6

A novel stabilizer containing hindered phenol and hindered amine light stabilizer (HALS) group in one molecule was prepared through the acyl chloride reaction followed by the amidation reaction. Its structure was characterized by electrospray ionization mass spectrometry (ESI‐MS) and proton nuclear magnetic resonance (¹H‐NMR), Fourier transform infrared spectroscopy (FT‐IR). The thermogravimetric analysis (TGA) results under nitrogen and air atmosphere indicated that the addition of the novel stabilizer efficiently improved the thermal and thermal‐oxidative stability of polyamide 6 (PA6). The thermal‐oxidative stabilization effect of the novel stabilizer on PA6 was further evaluated in terms of reduced viscosity, tensile properties, and chemical structure after accelerated thermal aging in an air circulating oven at 150°C. The results indicated that the novel stabilizer could improve the thermal‐oxidative stability of PA6 effectively, resulting in the high retention of reduced viscosity and tensile strength, and the low ratio of terminal carboxyl group to amino group. The mechanism of the novel stabilizer on the thermal‐oxidative stabilization of PA6 was also discussed. POLYM. ENG. SCI., 54:2197–2206, 2014. © 2013 Society of Plastics Engineers     

Effective preparation and characterization of montmorillonite/poly(ε‐caprolactone)‐based polyurethane nanocomposites

In this study, montmorillonite (MMT)/poly(?‐caprolactone)‐based polyurethane cationomer (MMT/PCL‐PUC) nanocomposites were prepared and their mechanical properties, thermal stability, and biodegradability were investigated. PCL‐PUC has 3 mol % of quaternary ammonium groups in the main chain. The MMT was successfully exfoliated and well dispersed in the PCL‐PUC matrix for up to 7 wt % of MMT. The 3 mol % of quaternary ammonium groups facilitated exfoliation of MMT. The 1 wt % MMT/PCL‐PUC nanocomposites showed enhanced tensile properties relative to the pure PCL‐PU. As the MMT content increased in the MMT/PCL‐PUC nanocomposites, the degree of microphase separation of PCL‐PUC decreased because of the strong interactions between the PCL‐PUC chains and the exfoliated MMT layers. This resulted in an increase in the Young's modulus and a decrease in the elongation at break and maximum stress of the MMT/PCL‐PUC nanocomposites. Biodegradability of the MMT/PCL‐PUC nanocomposites was dramatically increased with increasing content of MMT, likely because of the less phase‐separated morphology of MMT/PCL‐PUC. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of hybrid reinforcement based on precipitated silica and montmorillonite nanofillers on the mechanical properties of a silicone rubber

Silicone rubber (SR) nanocomposites containing precipitated silica (PS), montmorillonite (MMT), and PS/MMT hybrid fillers were prepared through melt‐mixing technique. In the SR/PS/MMT nanocomposite, the hybrid filler weight ratio was increased progressively from 0.4 to 1.7 while keeping the MMT weight constant. The viscosity, cure characteristics, and mechanical properties of the nanocomposites were subsequently measured. The optimum cure time increased, and the scorch time and rate of cure decreased. Furthermore, when the hybrid filler weight ratio was raised to its optimum, the tensile strength, Young's modulus, modulus at 100 and 300% elongation (M100 and M300), elongation at break, stored energy density at break, and hardness of the nanocomposite improved. The stress–strain properties of the nanocomposite with the hybrid filler improved at high deformation in comparison with those containing the PS and MMT fillers. The MMT filler exfoliated in the SR/MMT nanocomposite but did not in the nanocomposites containing the hybrid filler. Notably, the mechanical properties of the nanocomposite benefitted from the hybrid filler. This was due to the filler–filler and filler–rubber network formation in the rubber by the PS particles. Finally, effect of the PS, MMT, and hybrid fillers on the energy loss or hysteresis of the rubber was measured. POLYM. ENG. SCI., 54:1909–1921, 2014. © 2013 Society of Plastics Engineers     

Preparation and properties of bio‐based epoxy montomorillonite nanocomposites derived from polyglycerol polyglycidyl ether and ε‐polylysine

Glycerol polyglycidyl ether (GPE) and polyglycerol polyglycidyl ether (PGPE) were cured with ε‐poly(L ‐lysine) (PL) using epoxy/amine ratios of 1 : 1 and 2 : 1 to create bio‐based epoxy cross‐linked resins. When PGPE was used as an epoxy resin and the epoxy/amine ratio was 1 : 1, the cured neat resin showed the greatest glass transition temperature (T_g), as measured by differential scanning calorimetry. Next, the mixture of PGPE, PL, and montomorillonite (MMT) at an epoxy/amine ratio of 1 : 1 in water was dried and cured finally at 110°C to create PGPE‐PL/MMT composites. The X‐ray diffraction and transmission electron microscopy measurements revealed that the composites with MMT content 7–15 wt % were exfoliated nanocomposites and the composite with MMT content 20 wt % was an intercalated nanocomposite. The T_g and storage modulus at 50–100°C for the PGPE‐PL/MMT composites measured by DMA increased with increasing MMT content until 15 wt % and decreased at 20 wt %. The tensile strength and modulus of the PGPE‐PL/MMT composites (MMT content 15 wt %: 42 and 5300 MPa) were much greater than those of the cured PGPE‐PL resin (4 and 6 MPa). Aerobic biodegradability of the PGPE‐PL in an aqueous medium was ～ 4% after 90 days, and the PGPE‐PL/MMT nanocomposites with MMT content 7–15 wt % showed lower biodegradability. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(vinyl alcohol) nanocomposites with different clays: Pristine clays and organoclays

Poly(vinyl alcohol) (PVA)/clay nanocomposites were synthesized using the solution intercalation method. Na ion‐exchanged clays [Na⁺–saponite (SPT) and Na⁺–montmorillonite (MMT)] and alkyl ammonium ion‐exchanged clays (C₁₂–MMT and C₁₂OOH–MMT) were used for the PVA nanocomposites. From the morphological studies, the Na ion‐exchanged clay is more easily dispersed in a PVA matrix than is the alkyl ammonium ion‐exchanged clay. Attempts were also made to improve both the thermal stabilities and the tensile properties of PVA/clay nanocomposite films, and it was found that the addition of only a small amount of clay was sufficient for that purpose. Both the ultimate tensile strength and the initial modulus for the nanocomposites increased gradually with clay loading up to 8 wt %. In C₁₂OOH–MMT, the maximum enhancement of the ultimate tensile strength and the initial modulus for the nanocomposites was observed for blends containing 6 wt % organoclay. Na ion‐exchanged clays have higher tensile strengths than those of organic alkyl‐exchanged clays in PVA nanocomposites films. On the other hand, organic alkyl‐exchanged clays have initial moduli that are better than those of Na ion‐exchanged clays. Overall, the content of clay particles in the polymer matrix affect both the thermal stability and the tensile properties of the polymer/clay nanocomposites. However, a change in thermal stability with clay was not significant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3208–3214, 2003     

Investigation of thermal degradation and flammability of polyamide‐6 and polyamide‐6 nanocomposites

In this paper, polyamide‐6 and polyamide‐6 nanocomposites were prepared by direct melt intercalation technique. The thermal degradation behavior of both polyamide‐6 and polyamide‐6 clay nanocomposites has been studied. The apparent activation energy of the nanocomposites is almost the same with that of pure polymer under nitrogen, but the apparent activation energy of the nanocomposites is greatly enhanced in air atmosphere. This increasing trend coincides with the thermal analysis and the cone calorimeter results, which may suggest that the polymer/clay nanocomposites have a higher thermal stability and lower flammability. The kinetic analysis also indicates that the pyrolytic degradation and the thermal oxidative degradation of PA6 and PA6/OMT nanocomposites are two kinds of different reaction models. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2297–2303, 2007     

Property enhancement in unsaturated polyester nanocomposites by using a reactive intercalant for clay modification

Polymeric nanocomposites were synthesized from unsaturated polyester (UPE) matrix and montmorillonite (MMT) clay using an in situ free radical polymerization reaction. Organophilic MMT was obtained using a quaternary salt of coco amine as intercalant having a styryl group making it a reactive intercalant. The resultant nanocomposites were characterized via X‐ray diffraction and transmission electron microscopy. The effect of increased nanofiller loading on the thermal and mechanical properties of the nanocomposites was investigated. All the nanocomposites were found to have improved thermal and mechanical properties as compared with neat UPE matrix, resulting from the contribution of nanolayer connected intercalant‐to‐crosslinker which allows a crosslinking reaction. It was found that the partially exfoliated nanocomposite structure with an exfoliation dominant morphology was achieved when the MMT loading was 1 wt %. This nanocomposite exhibited the highest thermal stability, the best dynamic mechanical performance and the highest crosslinking density, most probably due to more homogeneous dispersion and optimum amount of styrene monomer molecules inside and outside the MMT layers at 1 wt % loading. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Structure and properties of nanocomposites prepared by directly melt blending ethylene‐co‐vinylacetate and natural montmorillonite

The poly(ethylene‐co‐vinylacetate)/montmorillonite (EVA/MMT) nanocomposites were prepared by directly melt blending EVA and natural MMT in the presence of hexadecyl trimethylammonium bromide. The interlayer spacing of the silicate layers in EVA/MMT nanocomposites increased within 15 min of the blending time, and then remained unchanged with further increase in the blending time. The tensile and tear strength and Young's modulus of EVA/MMT nanocomposites increased with increasing blending time and reached the maximum value at 15 min, and then decreased. The tensile and tear strength and Young's modulus of EVA/MMT nanocomposites blended at 140°C were lower than those of the nanocomposites blended at 120°C. The thermal stability of EVA/MMT nanocomposites was improved compared with EVA. Furthermore, the thermal stability of EVA/MMT nanocomposites in nitrogen was higher than thermal stability of the nanocomposites in air because of the air destabilized the EVA and speeded up both deacylation and degradation. POLYM. COMPOS., 27:529–532, 2006. © 2006 Society of Plastics Engineers     

Characteristics of soy protein isolate‐montmorillonite composite films

Soy protein isolate/montmorillonite (SPI/MMT) nanocomposite films were prepared in which MMT was used as a nanofiller at 0, 3, 6, 9, 12, and 15 wt % relative to SPI dry weight. Effects of MMT on film properties including tensile strength, elongation at break, total soluble matter, water vapor permeability, and oxygen permeability were assessed. X‐ray diffraction patterns were determined, and morphologies of SPI and the SPI‐MMT composite films were visualized by scanning electron microscopy. Mechanical and barrier properties were improved by evidenced increases in tensile strength and modulus, and decreases in permeability to water vapor and oxygen. MMT concentrations of 3%–12% were optimal for improving functional properties of the composite films. X‐ray diffraction and scanning electron microscopy examinations revealed the formation of an intercalated and exfoliated structure on the addition of MMT into the SPI matrix. We conclude that intercalated and exfoliated MMT silicates enhance mechanical and barrier properties of SPI films. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Improving heat ageing and thermal properties of silicone rubber using montmorillonite clay

Heat ageing and thermal stability of a silicone rubber (SR) filled with montmorillonite clay (MMT) was investigated. Three types of rubber nanocomposites were prepared with highly exfoliated Cloisite 30B (SR/C30B), intercalated/exfoliated Cloisite Na⁺ (SR/Na⁺MMT), and highly intercalated Cloisite 20A (SR/C20A). This study showed that the SR/C30B nanocomposite exhibited excellent heat resistance in comparison to the other two nanocomposites and neat SR as revealed by higher retention strength. The thermal stability of the rubber in air was strongly dependent on the clay morphology and increased in the following order: highly intercalated/exfoliated SR/Na⁺MMT < highly intercalated SR/C20A < highly exfoliated SR/C30B. The thermogravimetric analyses of the SR/C30B nanocomposite showed a substantial increase in the final residue in comparison with the neat SR. This indicated a major improvement in the thermal stability of the rubber containing the exfoliated clay, which was also supported by the higher activation energy of decomposition measured for the nanocomposite. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41061.     

Nanocomposites based on poly(butylene adipate‐co‐terephthalate) and montmorillonite

Nanocomposites based on biodegradable poly(butylene adipate‐co‐terephthalate) (PBAT) and layered silicates were prepared by the melt intercalation method. Nonmodified montmorillonite (MMT) and organo‐modified MMTs (DA‐M, ODA‐M, and LEA‐M) by the protonated ammonium cations of dodecylamine, octadecylamine, and N‐lauryldiethanolamine, respectively, were used as the layered silicates. The comparison of interlayer spacing between clay and PBAT composites with inorganic content 3 wt % measured by X‐ray diffraction (XRD) revealed the formation of intercalated nanocomposites in DA‐M and LEA‐M. In case of PBAT/ODA‐M (3 wt %), no clear peak related to interlayer spacing was observed. From morphological studies using transmission electron microscopy, the ODA‐M was found to be finely and homogeneously dispersed in the matrix polymer, indicating the formation of exfoliated nanocomposite. When ODA‐M content was increased, the XRD peak related to intercalated clay increased. Although the exfoliated ODA‐M (3 wt %) nanocomposite showed a lower tensile modulus than the intercalated DA‐M and LEA‐M (3 wt %) composites, the PBAT/ODA‐M composite with inorganic content 5 wt % showed the highest tensile modulus, strength, and elongation at break among the PBAT composites with inorganic content 5 wt %. Their tensile properties are discussed in relation to the degree of crystallinity of the injection molded samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 386–392, 2005     

环氧树脂/蒙脱土纳米复合材料制备及性能的研究进展

介绍蒙脱土(MMT)的性质及其有机化改性,详细阐述了环氧树脂(EP)/MMT纳米复合材料的制备方法及其性能,以及MMT在EP中的剥离机理,指出实现MMT在EP基体中完全剥离的方法仍是目前制备EP/MMT纳米复合材料的关键问题.