Comparative analysis of three approaches of antecedent part generation for an IT2 TSK FLS

Since extreme learning machine is a non-iterative estimation procedure, it is faster than gradient-based algorithms which are iterative. Moreover, the extreme learning machine does not have any design parameters such as learning rate, covariance matrix, etc. The rigorous proof of universal approximation of extreme learning machine with much milder conditions makes it a preferable choice in many different approaches. Although this algorithm is optimal for the parameters which appear linearly in the consequent part of interval type-2 fuzzy logic systems, it is not optimal for the parameters of the antecedent part as it uses random parameters. In this paper, heuristic optimization approaches such as genetic algorithm and artificial bee colony are used to optimize the parameters of the antecedent part of interval type-2 fuzzy logic systems. As these methods are global optimizers, there is less possibility that they will fall in a local minima and are suitable for the selection of the parameters of the antecedent part. A comparative analysis of the optimal parameters with the randomly and manually generated parameters is presented here using noise-free and noisy Mackey-Glass time series data sets and a real world data set. Simulation results support this idea over randomly and manually generated parameters.     

Interval type-2 fuzzy expert system for prediction of carbon monoxide concentration in mega-cities

This paper presents an indirect approach to interval type-2 fuzzy logic system modeling to forecaste the level of air pollutants. The type-2 fuzzy logic system permits us to model the uncertainties among rules and the parameters related to data analysis. In this paper, we propose an indirect method to create an interval type-2 fuzzy logic system from a historical data, where Footprint of Uncertainties of fuzzy sets are extracted by implementation of an interval type-2 FCM algorithm and based on an upper and lower value for the level of fuzziness m in FCM. Finally, the proposed model is applied for prediction of carbon monoxide concentration in Tehran air pollution. It is shown that the proposed type-2 fuzzy logic system is superior in comparison to type-1 fuzzy logic systems in terms of two performance indices.     

Optimal design of adaptive type-2 neuro-fuzzy systems: A review

Type-2 fuzzy logic systems have extensively been applied to various engineering problems, e.g. identification, prediction, control, pattern recognition, etc. in the past two decades, and the results were promising especially in the presence of significant uncertainties in the system. In the design of type-2 fuzzy logic systems, the early applications were realized in a way that both the antecedent and consequent parameters were chosen by the designer with perhaps some inputs from some experts. Since 2000s, a huge number of papers have been published which are based on the adaptation of the parameters of type-2 fuzzy logic systems using the training data either online or offline. Consequently, the major challenge was to design these systems in an optimal way in terms of their optimal structure and their corresponding optimal parameter update rules. In this review, the state of the art of the three major classes of optimization methods are investigated: derivative-based (computational approaches), derivative-free (heuristic methods) and hybrid methods which are the fusion of both the derivative-free and derivative-based methods.     

Finishing mill strip gage setup and control by interval type-1 non-singleton type-2 fuzzy logic systems

The setup and control of the finishing mill roll gap positions required to achieve the desired strip head thickness as measured by the finish mill exit X-ray gauge sensor is made by an intelligent controller based on an interval type-2 fuzzy logic system. The controller calculates the finishing mill stand screw positions required to achieve the strip finishing mill exit target thickness. The interval type-2 fuzzy head gage controller uses as inputs the transfer bar thickness, the width and the temperature at finishing mill entry, the strip target thickness, the width and the temperature at finishing mill exit, the stand work roll diameter, the stand work roll speed, the stand entry thickness, the stand exit thickness, the stand rolling force, and the %C of the strip. Taking into account that the measurements and inputs to the proposed system are modeled as type-1 non-singleton fuzzy numbers, we present the so called interval type-1 non-singleton type-2 fuzzy logic roll gap controller. As reported in the literature, interval type-2 fuzzy logic systems have greater non-linear approximation capacity than that of its type-1 counterpart and it has the advantage to develop more robust and reliable solutions than the latter. The experiments of these applications were carried out for three different types of coils, from a real hot strip mill. The results proved the feasibility of the developed system for roll gap control. Comparison against the mathematical based model shows that the proposed interval type-2 fuzzy logic system equalizes the performance in finishing mill stand screw positions setup and enhances the achieved strip thickness under the tested conditions characterized by high uncertainty levels.     

A type-2 neural fuzzy system learned through type-1 fuzzy rules and its FPGA-based hardware implementation

This paper first proposes a type-2 neural fuzzy system (NFS) learned through its type-1 counterpart (T2NFS-T1) and then implements the built IT2NFS-T1 in a field-programmable gate array (FPGA) chip. The antecedent part of each fuzzy rule in the T2NFS-T1 uses interval type-2 fuzzy sets, while the consequent part uses a Takagi-Sugeno-Kang (TSK) type with interval combination weights. The T2NFS-T1 uses a simplified type-reduction operation to reduce system training time and hardware implementation cost. Given a training data set, a TSK type-1 NFS is first learned through structure and parameter learning. The built type-1 fuzzy logic system (FLS) is then extended to a type-2 FLS, where highly overlapped type-1 fuzzy sets are merged into interval type-2 fuzzy sets to reduce the total number of fuzzy sets. Finally, the rule consequent and antecedent parameters in the T2NFS-T1 are tuned using a hybrid of the gradient descent and rule-ordered recursive least square (RLS) algorithms. Simulation results and comparisons with various type-1 and type-2 FLSs verify the effectiveness and efficiency of the T2NFS-T1 for system modeling and prediction problems. A new hardware circuit using both parallel-processing and pipeline techniques is proposed to implement the learned T2NFS-T1 in an FPGA chip. The T2NFS-T1 chip reduces the hardware implementation cost in comparison to other type-2 fuzzy chips.     

A hybrid learning algorithm for a class of interval type-2 fuzzy neural networks

In real life, information about the world is uncertain and imprecise. The cause of this uncertainty is due to: deficiencies on given information, the fuzzy nature of our perception of events and objects, and on the limitations of the models we use to explain the world. The development of new methods for dealing with information with uncertainty is crucial for solving real life problems. In this paper three interval type-2 fuzzy neural network (IT2FNN) architectures are proposed, with hybrid learning algorithm techniques (gradient descent backpropagation and gradient descent with adaptive learning rate backpropagation). At the antecedents layer, a interval type-2 fuzzy neuron (IT2FN) model is used, and in case of the consequents layer an interval type-1 fuzzy neuron model (IT1FN), in order to fuzzify the rule’s antecedents and consequents of an interval type-2 Takagi-Sugeno-Kang fuzzy inference system (IT2-TSK-FIS). IT2-TSK-FIS is integrated in an adaptive neural network, in order to take advantage the best of both models. This provides a high order intuitive mechanism for representing imperfect information by means of use of fuzzy If-Then rules, in addition to handling uncertainty and imprecision. On the other hand, neural networks are highly adaptable, with learning and generalization capabilities. Experimental results are divided in two kinds: in the first one a non-linear identification problem for control systems is simulated, here a comparative analysis of learning architectures IT2FNN and ANFIS is done. For the second kind, a non-linear Mackey-Glass chaotic time series prediction problem with uncertainty sources is studied. Finally, IT2FNN proved to be more efficient mechanism for modeling real-world problems.     

An evolving recurrent interval type-2 intuitionistic fuzzy neural network for online learning and time series prediction

The prediction of time series has both the theoretical value and practical significance in reality. However, since the high nonlinear and noises in the time series, it is still an open problem to tackle with the uncertainties and fuzziness in the forecasting process. In this article, an evolving recurrent interval type-2 intuitionistic fuzzy neural network (eRIT2IFNN) is proposed for time series prediction and regression problems. The eRIT2IFNN employs interval type-2 intuitionistic fuzzy sets to enhance the modeling of uncertainties by intuitionistic evaluation and noise tolerance of the system. In the eRIT2IFNN, the antecedent part of each fuzzy rule is defined using intuitionistic interval type-2 fuzzy sets, and the consequent realizes the Takagi–Sugeno–Kang type fuzzy inference mechanism. In order to utilize the prior knowledge including intuitionistic information, a local internal feedback is established by feeding the rule firing strength of each rule to itself eRIT2IFNN is fully adaptive to the evolving of sequence data by online learning of structure and parameters. A modified density-based clustering is implemented for the structure learning, where both densities and membership degrees are involved to determine the fuzzy rules. Performance of eRIT2IFNN is evaluated using a set of benchmark problems and compared with existing fuzzy inference systems. Moreover, the eRIT2IFNN is tested for identification of dynamics under both noise-free and noisy environments. Finally, a group of practical financial price-tracking problems including high-frequency data of financial future, commodity future and precious metal are used for the evaluation of the proposed inference system.     

Experimental study of intelligent controllers under uncertainty using type-1 and type-2 fuzzy logic

Uncertainty is an inherent part in control systems used in real world applications. The use of new methods for handling incomplete information is of fundamental importance. Type-1 fuzzy sets used in conventional fuzzy systems cannot fully handle the uncertainties present in control systems. Type-2 fuzzy sets that are used in type-2 fuzzy systems can handle such uncertainties in a better way because they provide us with more parameters and more design degrees of freedom. This paper deals with the design of control systems using type-2 fuzzy logic for minimizing the effects of uncertainty produced by the instrumentation elements, environmental noise, etc. The experimental results are divided in two classes, in the first class, simulations of a feedback control system for a non-linear plant using type-1 and type-2 fuzzy logic controllers are presented; a comparative analysis of the systems’ response in both cases was performed, with and without the presence of uncertainty. For the second class, a non-linear identification problem for time-series prediction is presented. Based on the experimental results the conclusion is that the best results are obtained using type-2 fuzzy systems.     

Design of interval type-2 fuzzy sliding-mode controller

In this paper, an interval type-2 fuzzy sliding-mode controller (IT2FSMC) is proposed for linear and nonlinear systems. The proposed IT2FSMC is a combination of the interval type-2 fuzzy logic control (IT2FLC) and the sliding-mode control (SMC) which inherits the benefits of these two methods. The objective of the controller is to allow the system to move to the sliding surface and remain in on it so as to ensure the asymptotic stability of the closed-loop system. The Lyapunov stability method is adopted to verify the stability of the interval type-2 fuzzy sliding-mode controller system. The design procedure of the IT2FSMC is explored in detail. A typical second order linear interval system with 50% parameter variations, an inverted pendulum with variation of pole characteristics, and a Duffing forced oscillation with uncertainty and disturbance are adopted to illustrate the validity of the proposed method. The simulation results show that the IT2FSMC achieves the best tracking performance in comparison with the type-1 Fuzzy logic controller (T1FLC), the IT2FLC, and the type-1 fuzzy sliding-mode controller (T1FSMC).     

Interval type-2 fuzzy logic and modular neural networks for face recognition applications

In this paper we present a method for response integration in multi-net neural systems using interval type-2 fuzzy logic and fuzzy integrals, with the purpose of improving the performance in the solution of problems with a great volume of information. The method can be generalized for pattern recognition and prediction problems, but in this work we show the implementation and tests of the method applied to the face recognition problem using modular neural networks. In the application we use two interval type-2 fuzzy inference systems (IT2-FIS); the first IT2-FIS was used for feature extraction in the training data, and the second one to estimate the relevance of the modules in the multi-net system. Fuzzy logic is shown to be a tool that can help improve the results of a neural system by facilitating the representation of human perceptions.     

基于量子粒子群的斜坡上两轮移动机器人的广义二型模糊控制

两轮移动机器人(2WMR)本身具有多变量和非线性等特征,从而使其控制变得复杂。当2WMR在倾斜的表面上移动时,控制问题变得更加复杂。针对2WMR的非线性模型,设计2WMR的广义二型模糊逻辑平衡控制器和位置控制器。针对广义二型模糊逻辑控制器(GT2FLC)中前、后件中参数难以设定的问题,通过量子粒子群算法(QPSO)优化隶属函数中的参数。针对GT2FLC和区间二型模糊逻辑控制器(IT2FLC)在不同斜面上对移动2WMR的平衡和位置控制的效果进行进一步的对比分析,并干扰对控制效果的影响。仿真结果表明,GT2FLC具有更好的抗干扰能力。     

A Self-Evolving Interval Type-2 Fuzzy Neural Network With Online Structure and Parameter Learning

This paper proposes a self-evolving interval type-2 fuzzy neural network (SEIT2FNN) with online structure and parameter learning. The antecedent parts in each fuzzy rule of the SEIT2FNN are interval type-2 fuzzy sets and the fuzzy rules are of the Takagi–Sugeno–Kang (TSK) type. The initial rule base in the SEIT2FNN is empty, and the online clustering method is proposed to generate fuzzy rules that flexibly partition the input space. To avoid generating highly overlapping fuzzy sets in each input variable, an efficient fuzzy set reduction method is also proposed. This method independently determines whether a corresponding fuzzy set should be generated in each input variable when a new fuzzy rule is generated. For parameter learning, the consequent part parameters are tuned by the rule-ordered Kalman filter algorithm for high-accuracy learning performance. Detailed learning equations on applying the rule-ordered Kalman filter algorithm to the SEIT2FNN consequent part learning, with rules being generated online, are derived. The antecedent part parameters are learned by gradient descent algorithms. The SEIT2FNN is applied to simulations on nonlinear plant modeling, adaptive noise cancellation, and chaotic signal prediction. Comparisons with other type-1 and type-2 fuzzy systems in these examples verify the performance of the SEIT2FNN.      

Optimization of interval type-2 fuzzy systems for image edge detection

This paper presents the optimization of a fuzzy edge detector based on the traditional Sobel technique combined with interval type-2 fuzzy logic. The goal of using interval type-2 fuzzy logic in edge detection methods is to provide them with the ability to handle uncertainty in processing real world images. However, the optimal design of fuzzy systems is a difficult task and for this reason the use of meta-heuristic optimization techniques is also considered in this paper. For the optimization of the fuzzy inference systems, the Cuckoo Search (CS) and Genetic Algorithms (GAs) are applied. Simulation results show that using an optimal interval type-2 fuzzy system in conjunction with the Sobel technique provides a powerful edge detection method that outperforms its type-1 counterparts and the pure original Sobel technique.     

A Recurrent Self-Evolving Interval Type-2 Fuzzy Neural Network for Dynamic System Processing

This paper proposes a recurrent self-evolving interval type-2 fuzzy neural network (RSEIT2FNN) for dynamic system processing. An RSEIT2FNN incorporates type-2 fuzzy sets in a recurrent neural fuzzy system in order to increase the noise resistance of a system. The antecedent parts in each recurrent fuzzy rule in the RSEIT2FNN are interval type-2 fuzzy sets, and the consequent part is of the Takagi-Sugeno-Kang (TSK) type with interval weights. The antecedent part of RSEIT2FNN forms a local internal feedback loop by feeding the rule firing strength of each rule back to itself. The TSK-type consequent part is a linear model of exogenous inputs. The RSEIT2FNN initially contains no rules; all rules are learned online via structure and parameter learning. The structure learning uses online type-2 fuzzy clustering. For the parameter learning, the consequent part parameters are tuned by a rule-ordered Kalman filter algorithm to improve learning performance. The antecedent type-2 fuzzy sets and internal feedback loop weights are learned by a gradient descent algorithm. The RSEIT2FNN is applied to simulations of dynamic system identifications and chaotic signal prediction under both noise-free and noisy conditions. Comparisons with type-1 recurrent fuzzy neural networks validate the performance of the RSEIT2FNN.     

On type-reduction of type-2 fuzzy sets: A review

As an undetachable module of type-2 (T2) fuzzy computations and reasoning, type-reduction methods play an important role in various fuzzy disciplines including fuzzy logic systems and fuzzy clustering. Importance of type-reduction techniques lies in the fact that they are the main tools for collecting the entire inherent vagueness of the data. Therefore, type-reduction methods form the output of type-2 fuzzy sets (T2 FSs) as the representative of the entire uncertainty in a given space. Hence, their accuracy, precision, and performance speed is of much interest. This paper, presents a comprehensive review on various type-reduction and defuzzification strategies for general and interval type-2 fuzzy sets and systems. It is tried to analyze the existing approaches from different point of views accompanied by extensive comparisons on different features of type-reduction methods to facilitate further research studies by the fuzzy community.     

Observer-based method for synchronization of uncertain fractional order chaotic systems by the use of a general type-2 fuzzy system

Synchronization of the fractional order chaotic systems is extensively studied in recent years due to its potential applications in many branches of science and engineering. The main problems in this field are that the dynamics of the system in hand are often uncertain and are perturbed by external disturbances. Also the unknown nonlinear functions in the system dynamics are generally complicated and in many practical applications we have measurement errors and unavailable states. In this paper, a novel robust and asymptotically stable controller is proposed to synchronize uncertain fractional order chaotic systems. Its design is based on linear matrix inequality (LMI) technique. Furthermore, an observer is presented to estimate the unavailable states. A general type-2 fuzzy system (GT2FS) based on α-plane representation with Gaussian secondary membership functions (MF) and type-2 non-singleton fuzzification is proposed to approximate the unknown complex nonlinear functions in the dynamics of system. The input uncertainties associated with the observer error and the malfunctioning of the input devices are modeled by interval type-2 fuzzy MFs instead of crisp numbers. To decrease the computational cost of the GT2FS, a simple type-reduction method is proposed. The antecedent parameters of GT2FS are tuned based on a modified form of social spider optimization (SSO) algorithm. The simulation examples show that the proposed control scheme gives high performance in the presence of unknown functions, external disturbances and unavailable states. The performance of GT2FS with different α-levels and different fuzzification methods are compared with type-1 and interval type-2 fuzzy systems in several examples.     

基于包含度的区间二型模糊粗糙集

基于区间二型模糊包含度的公理化定义,给出了新的区间二型模糊包含度计算公式.进一步,通过包含度定义了区间二型模糊粗糙集,并讨论了它的一些基本性质.最后,利用区间二型模糊粗糙集研究了连续域决策信息系统的属性约简,给出了新的约简方法.实例说明了该约简方法的具体计算步骤,并且通过实验验证了该算法的有效性和可行性.     

Granular type-2 membership functions: A new approach to formation of footprint of uncertainty in type-2 fuzzy sets

In this study, a new approach for the formation of type-2 membership functions is introduced. The footprint of uncertainty is formed by using rectangular type-2 fuzzy granules and the resulting membership function is named as granular type-2 membership function. This new approach provides more degrees of freedom and design flexibility in type-2 fuzzy logic systems. Uncertainties on the grades of membership functions can be represented independently for any region in the universe of discourse and free of any functional form. So, the designer could produce nonlinear, discontinuous or hybrid membership functions in granular formation and therefore could model any desired discontinuity and nonlinearity. The effectiveness of the proposed granular type-2 membership functions is firstly demonstrated by simulations done on noise corrupted Mackey–Glass time series prediction. Secondly, flexible design feature of granular type-2 membership functions is illustrated by modeling a nonlinear system having dead zone with uncertain system parameters. The simulation results show that type-2 fuzzy logic systems formed by granular type-2 membership functions have more modeling capabilities than the systems using conventional type-2 membership functions and they are more robust to system parameter changes and noisy inputs.     

广义二型模糊逻辑系统降型及其采样离散Nie-Tan算法

广义二型模糊逻辑系统在近年来成为学术研究的热点问题,而降型是该系统中的核心模块。最近的研究证明了连续Nie-Tan(CNT)算法是计算区间二型模糊集质心的准确方法。发现了离散Nie-Tan(NT)算法中的求和运算和CNT算法中的求积分运算的内在联系,用2类算法完成基于广义二型模糊集α-平面表达理论的广义二型模糊逻辑系统质心降型。3个计算机仿真实验表明,当适当增加主变量采样点个数时,所提出的基于主变量采样的离散NT算法计算出的广义二型模糊逻辑系统质心降型集和解模糊化值结果可以精确地逼近基准的CNT算法,且采样离散NT算法的计算效率远远高于CNT算法的效率。     

Application of type-2 neuro-fuzzy modeling in stock price prediction

We present an application of type-2 neuro-fuzzy modeling to stock price prediction based on a given set of training data. Type-2 fuzzy rules can be generated automatically by a self-constructing clustering method and the obtained type-2 fuzzy rules cab be refined by a hybrid learning algorithm. The given training data set is partitioned into clusters through input-similarity and output-similarity tests, and a type-2 TSK rule is derived from each cluster to form a fuzzy rule base. Then the antecedent and consequent parameters associated with the rules are refined by particle swarm optimization and least squares estimation. Experimental results, obtained by running on several datasets taken from TAIEX and NASDAQ, demonstrate the effectiveness of the type-2 neuro-fuzzy modeling approach in stock price prediction.