共查询到16条相似文献,搜索用时 171 毫秒
1.
条纹中心线法是一种重要的电子散斑干涉条纹解调方法,其前提条件是获得高准确度的条纹中心线.本文在分析载波电子散斑干涉条纹自身特征的基础上,提出了一种基于载波条纹调制方向提取条纹中心线的方法.该方法首先通过同态滤波有效滤除高频乘性散斑噪音,提取出载波条纹;然后应用基于调制方向提取中心线算法确定载波条纹灰度极值点并做二值化处理;再采用基于中心线拟合或者基于条纹间距的边沿中心线补偿法,获得完整的条纹中心线图.实验结果表明:该方法简单、可靠,能快速、准确地提取出连续的中心线. 相似文献
2.
为了获得准确的面形测量,提出了一种相移电子散斑干涉技术测量物体面形的测量方法.利用电子散斑干涉产生载波条纹,该载波条纹受到物体表面高度的调制变得弯曲,引起载波条纹相位的变化,可运用相移技术提取物体的相位信息,最后根据高度和相位之间的关系得到物体的面形.介绍了该方法的原理,利用该方法对球冠物体进行了面形测量,证明该方法测量物体面形是可行性的.由于是采用散斑干涉的方法产生干涉条纹,因此该方法测量物体面形具有灵敏度高的优点. 相似文献
3.
利用电子散斑相移技术测量物体三维面形的方法 总被引:5,自引:5,他引:0
为了获得准确的面形测量,提出了一种相移电子散斑干涉技术测量物体面形的测量方法.利用电子散斑干涉产生载波条纹,该载波条纹受到物体表面高度的调制变得弯曲,引起载波条纹相位的变化,可运用相移技术提取物体的相位信息,最后根据高度和相位之间的关系得到物体的面形.介绍了该方法的原理,利用该方法对球冠物体进行了面形测量,证明该方法测量物体面形是可行性的.由于是采用散斑干涉的方法产生干涉条纹,因此该方法测量物体面形具有灵敏度高的优点. 相似文献
4.
针对传统傅里叶变换法在处理含有多突起的载波散斑条纹图时,由于存在频谱展宽会出现严重的解调相位失真,提出了一种基于条纹中心线的载波散斑条纹解调方法.根据载波调制时所采用平行调制方式和倾斜调制方式,分别从理论上对相关的中心线解调法进行数学推导,并进一步采用最小二乘三次曲面拟合法获得被测物面全场的离面位移信息.实验结果表明:利用上述中心线解调法和曲面拟合法能解调出复杂的载波条纹图,并获得具有亚像素定位准确度、连续光滑的全场离面位移信息. 相似文献
5.
大剪切电子散斑干涉的载频调制与位移场测量 总被引:6,自引:0,他引:6
将电子散斑干涉场的载波调制引入到大剪切电子散斑干涉中,通过对参考物的微小偏转引入载波条纹;利用傅里叶变换法,解调出了变形场的相位,从而实现了物体变形场的精确测量。讨论了大剪切载频的调制机理,理论分析表明,调制条纹的空间频率与参考面偏转的角度成正比;因此,控制参考面的偏转角度可实现不同位移量系统的调制。利用中心加载周边固定圆盘进行了典型实验,实验结果证明在大剪切电子散斑干涉技术中可以通过参考面的旋转高质量地实现电子散斑干涉条纹的调制,求解位移场。该系统具有系统简单,不需要专门引入参考光,条纹质量好等优点。该技术可扩展电子散斑干涉的应用范围,有一定的实际应用价值。 相似文献
6.
基于改进旋滤波的电子散斑干涉图滤波方法 总被引:1,自引:0,他引:1
电子散斑干涉术条纹图在成像时不可避免地受散斑噪声调制,去除噪声是散斑干涉条纹处理的一项重要任务。利用散斑条纹图的方向性,提出一种基于模糊方向的旋滤波:在当前点的领域内定义4个模糊方向窗口,将传统旋滤波的一维、精确方向窗口的确定,转变为模糊方向窗口的确定;在确定的窗口内进行低通滤波时,采用自适应加权均值滤波代替传统的中值滤波。利用该方法分别处理模拟散斑条纹图和实验所得的真实条纹图,并与传统旋滤波、双边滤波和小波丢弃子带方法比较。实验结果表明,该改进算法在滤除散斑条纹图噪声的同时,有效保护了条纹的细节信息。 相似文献
7.
8.
9.
10.
11.
Anisotropic partial differential equation noise-reduction algorithm based on fringe feature for ESPI
Noise reduction is one of the most exciting problems in electronic speckle pattern interferometry. We present a new anisotropic partial differential equation noise-reduction algorithm based on fringe orientation for interferometric fringe patterns. The proposed equation performs diffusion along the two directions of fringe gradient and isophote line, which are extracted accurately according to fringe feature. By restriction of diffusion in the gradient direction of fringe patterns, this method can provide optimal results in denoising but does not destroy fringe edges. The experimental results show that this technique is more capable of significantly improving the quality of the fringe patterns than the classical anisotropic diffusion equation proposed by Perona and Malik. Based on our filtered fringe patterns, the phase map obtained by phase-shifting technique can be extracted more accurately. It is an effective pre-processing method for electronic speckle pattern interferometry. 相似文献
12.
We describe a novel method for skeletonization of gray-scale electronic speckle pattern interferometry (ESPI) fringe patterns. Our method is based on the gradient vector field (GVF). We propose a new partial differential equation model for calculating the GVF of ESPI fringe patterns. Further, we propose rules used to measure the possibility of each pixel on the skeleton based on the topological analysis of the GVF. The final skeletons are traced, which mimics the behavior of edge detection based on these rules. The proposed method works directly on the gray-scale images. 相似文献
13.
Ping Sun 《Optics Communications》2007,275(2):305-310
A fringe carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing electronic speckle pattern interferometry (ESPI) is presented. If the test object is respectively illuminated by two expanded symmetric illuminations in large image-shearing ESPI, two interferometers are formed. Carrier fringe patterns can be introduced by tilting reference surface a small angle. The carrier fringe patterns are demodulated after deformation of the object. Two phase maps, which include out-of-plane and in-plane displacement, can be obtained by using Fourier transform. Then out-of-plane displacement can be easily separated from in-plane displacement by simple operation between two unwrapped phase distributions. The principle of spatial carrier frequency modulation in large image-shearing ESPI is discussed. A typical three-point-bending experiment is completed. Experimental results are offered. The results show that the method offers high visibility of carrier fringes. And the system presented does not need a special beam as a reference light and has simple optical setup. 相似文献
14.
A novel method to obtain electronic speckle pattern interferometry fringe patterns with high contrast 总被引:1,自引:0,他引:1
Traditional speckle fringe patterns of electronic speckle pattern interferometry (ESPI) are obtained by adding, subtracting, or multiplying the speckle patterns recorded before and after the deformation. However, these speckle fringe patterns are of limited visibility, especially for addition and multiplication fringe patterns. We propose a novel method to obtain speckle fringe patterns of ESPI from undeformed and deformed speckle patterns. The fringe pattern generated by our method is of high contrast and has better quality than subtraction fringe. The new method is simple and does not require more computational effort. The proposed method is tested on the experimentally obtained undeformed and deformed speckle patterns. The experimental results illustrate the performance of this approach. 相似文献
15.
散斑条纹图的自适应窗口滤波方法 总被引:2,自引:0,他引:2
针对散斑噪声很难用常用的滤波方法进行滤除,在已有等值线滤波方法的基础上,提出一种更优的自适应窗口滤波方法。由于等值线窗口是在条纹方向图的基础上得到的,深入研究条纹方向的求取方法,提出了一种更为可靠的条纹方向求取算法,在得到高精度条纹方向的同时,还能估计出条纹的密度。使用等值线窗口技术,保持了窗口形状的自适应能力,然后利用对条纹密度的估计,根据条纹的宽度来确定滤波窗口的大小,实现了滤波窗口大小的自适应。最后,根据条纹方向和滤波后的图像可以直接得到条纹密度变化较大的单幅散斑图的相位结果。 相似文献
16.
A robust method of determining the sign map and skeletons for ESPI images is introduced in this paper. ESPI images have high speckle noise which makes it difficult to obtain the fringe information, especially from a single image. To overcome the effects of high speckle noise, local directional computing windows are designed according to the fringe directions. Then by calculating the gradients from the filtered image in directional windows, sign map and good skeletons can be determined robustly. Based on the sign map, single image phase-extracting methods such as quadrature transform can be improved. And based on skeletons, fringe phases can be obtained directly by normalization methods. Experiments show that this new method is robust and effective for extracting phase from a single ESPI fringe image. 相似文献