Heterodinuclear Lanthanoid‐Containing Polyoxometalates: Stepwise Synthesis and Single‐Molecule Magnet Behavior

Polyoxometalates (POMs) with heterodinuclear lanthanoid cores, TBA₈H₄[{Ln(μ₂‐OH)₂Ln′}(γ‐SiW₁₀O₃₆)₂] ( LnLn′ ; Ln=Gd, Dy; Ln′=Eu, Yb, Lu; TBA=tetra‐n‐butylammonium), were successfully synthesized through the stepwise incorporation of two types of lanthanoid cations into the vacant sites of lacunary [γ‐SiW₁₀O₃₆]^8? units without the use of templating cations. The incorporation of a Ln³⁺ ion into the vacant site between two [γ‐SiW₁₀O₃₆]^8? units afforded mononuclear Ln³⁺‐containing sandwich‐type POMs with vacant sites ( Ln1 ; TBA₈H₅[{Ln(H₂O)₄}(γ‐SiW₁₀O₃₆)₂]; Ln=Dy, Gd, La). The vacant sites in Ln1 were surrounded by coordinating W? O and Ln? O oxygen atoms. On the addition of one equivalent of [Ln′(acac)₃] to solutions of Dy1 or Gd1 in 1,2‐dichloroethane (DCE), heterodinuclear lanthanoid cores with bis(μ₂‐OH) bridging ligands, [Dy(μ₂‐OH)₂Ln′]⁴⁺, were selectively synthesized ( LnLn′ ; Ln=Dy, Gd; Ln′=Eu, Yb, Lu). On the other hand, La1 , which contained the largest lanthanoid cation, could not accommodate a second Ln′³⁺ ion. DyLn′ showed single‐molecule magnet behavior and their energy barriers for magnetization reversal (ΔE/k_B) could be manipulated by adjusting the coordination geometry and anisotropy of the Dy³⁺ ion by tuning the adjacent Ln′³⁺ ion in the heterodinuclear [Dy(μ₂‐OH)₂Ln′]⁴⁺ cores. The energy barriers increased in the order: DyLu (ΔE/k_B=48 K)< DyYb (53 K)< DyDy (66 K)< DyEu (73 K), with an increase in the ionic radii of Ln′³⁺; DyEu showed the highest energy barrier.     

Engineering the Ionic Self‐Assembly of Polyoxometalates and Facial‐Like Peptides

The self‐assembly behavior of polyoxometalates (PMs) and facial‐like cationic peptides carrying lysine residues were systematically investigated. Circular dichroism and UV/Vis spectra demonstrated that the multivalent electrostatic attractions between polyanionic PMs and short peptides with protonated lysine residues initiated the conformational transition of peptide molecules from random‐coil to β‐sheet state, and subsequently the co‐assembly. TEM and atomic force microscopy (AFM) measurements showed that uniform nanofibers formed with decreasing size of the PMs or increasing the intermolecular forces of the peptides, such as through hydrogen‐bonding, hydrophobic, and/or π–π interactions. Additionally, the stability of the nanostructures can be improved by rational suppression of the electrostatic repulsion of the shell peptides covering the surface of the nanostructures. These results provide new insight into understanding the ionic self‐assembly of peptides and PMs and controlling their final morphology.     

New Entangled Coordination Networks Based on Charge‐Tunable Keggin‐Type Polyoxometalates

Investigation into a hydrothermal reaction system with transition‐metal (TM) ions, 1,4‐bis(1,2,4‐triazol‐1‐lmethyl)benzene (BBTZ) and various charge‐tunable Keggin‐type polyoxometalates (POMs) led to the preparation of four new entangled coordination networks, [Co^II(HBBTZ)(BBTZ)_2.5][PMo₁₂O₄₀] ( 1 ), [Cu^I(BBTZ)]₅[BW₁₂O₄₀] ? H₂O ( 2 ), [Cu^II(BBTZ)]₃[AsW^V₃W^VI₉O₄₀] ? 10 H₂O ( 3 ), and [Cu^II₅(BBTZ)₇(H₂O)₆][P₂W₂₂Cu₂O₇₇(OH)₂] ? 6 H₂O ( 4 ). All compounds were characterized by using elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. The mixed valence of W centers in compound 3 was further confirmed by using XPS spectroscopy and bond‐valence sum calculations. In the structural analysis, the entangled networks of 1 – 4 demonstrate zipper‐closing packing, 3D polythreading, 3D polycatenation, and 3D self‐penetration, respectively. Moreover, with the enhancement of POM negative charges and the use of different TM types, the number of nodes in the coordination networks of 1 – 4 increased and the basic metal–organic building motifs changed from a 1D zipper‐type chain (in 1 ) to a 2D pseudorotaxane layer (in 2 ) to a 3D diamond‐like framework (in 3 ) and finally to a 3D self‐penetrating framework (in 4 ). The photocatalytic properties of compounds 1 – 4 for the degradation of methylene blue under UV light were also investigated; all compounds showed good catalytic activity and the photocatalytic activity order of Keggin‐type species was initially found to be {XMo₁₂O₄₀}>{XW₁₂O₄₀}>{XW_12?nTM_nO₄₀}.     

Three Keggin‐Type Transition Metal‐Substituted Polyoxometalates as Pure Inorganic Photosensitizers for p‐Type Dye‐Sensitized Solar Cells

In light of the serious challenge of severe global energy shortages, p‐type dye‐sensitized solar cells (p‐DSSCs) have attracted increasing levels of interest. The potential of three Keggin‐type transition metal‐substituted polyoxometalates, TBA₈Na₂[SiW₉O₃₇{Co(H₂O)₃}]? 11 H₂O (SiW₉Co₃), TBA₄[(SiO₄)W₁₀Mn^III₂O₃₆H₆]?1.5 CH₃CN? 2 H₂O (SiW₁₀Mn^III₂), and TBA_3.5H_5.5[(SiO₄)W₁₀Mn^III/IV₂O₃₆]? 10 H₂O?0.5 CH₃CN (SiW₁₀Mn^III/IV₂) has been explored as pure inorganic dye photosensitizers for p‐DSSCs (TBA=(n‐C₄H₉)₄N⁺). The three dyes show overall conversion efficiencies of 0.038, 0.029, and 0.027 %, respectively, all of which are higher than that of coumarin 343 (0.017 %). These polyoxometalates are the first three pure inorganic dyes reported for use with p‐DSSCs and therefore demonstrate a new strategy for designing efficient dyes, especially pure inorganic dyes. Moreover, they broaden the range of applications for polyoxometalates.     

Polyoxometalates as Potential Next‐Generation Metallodrugs in the Combat Against Cancer

Polyoxometalates (POMs) are an emerging class of inorganic metal oxides, which over the last decades demonstrated promising biological activities by the virtue of their great diversity in structures and properties. They possess high potential for the inhibition of various tumor types; however, their unspecific interactions with biomolecules and toxicity impede their clinical usage. The current focus of the field of biologically active POMs lies on organically functionalized and POM‐based nanocomposite structures as these hybrids show enhanced anticancer activity and significantly reduced toxicity towards normal cells in comparison to unmodified POMs. Although the antitumor activity of POMs is well documented, their mechanisms of action are still not well understood. In this Review, an overview is given of the cytotoxic effects of POMs with a special focus on POM‐based hybrid and nanocomposite structures. Furthermore, we aim to provide proposed mode of actions and to identify molecular targets. POMs are expected to develop into the next generation of anticancer drugs that selectively target cancer cells while sparing healthy cells.     

Light Triggered Co‐Assembly of Photocleavable Copolymers and Polyoxometalates with Enhanced Photoluminescence

A novel co‐assembly based on the block copolymer bearing photocleavable groups and macroanionic polyoxometalates Na₉[Ln(W₅O₁₈)₂] (LnW₁₀, Ln = Eu, Dy) triggered by UV light is realized in aqueous solution. The copolymer synthesized by atom transfer radical polymerization (ATRP) undergoes irreversible cleavage upon UV irradiation to generate primary amine (pKa ≈ 8–9) residues which are completely protonated under a neutral pH in aqueous solution. Electrostatic attractions between the resulting positively charged copolymers and anionic LnW₁₀ drive the formation of assemblies. In situ small angle X‐ray scattering and transmission electron microscopy are used to characterize the morphology of the assemblies. The microenvironments around polyoxometalates in the core of hybrid assemblies become highly hydrophobic, resulting in dramatically enhanced photoluminescence with the obvious intensity enhancement. The solution parameters pH and salt additives show great effects on the formation of assemblies.

     

Deep Desulfurization by Amphiphilic Lanthanide‐Containing Polyoxometalates in Ionic‐Liquid Emulsion Systems under Mild Conditions

Amphiphilic lanthanide‐containing polyoxometalates (POMs) were prepared by surfactant encapsulation. Investigation of these lanthanide‐containing POMs in oxidative desulfurization (ODS) showed that highly efficient deep desulfurization could be achieved in only 14 min with 100 % conversion of dibenzothiophene under mild conditions by using (DDA)₉LaW₁₀/[omim]PF₆ (DDA=dimethyldioctadecylammonium, omim=1‐octyl‐3‐methyl‐imidazolium) in the presence of H₂O₂. Furthermore, deep desulfurization proceeds smoothly in model oil with an S content as low as 50 ppm. A scaled‐up experiment in which the volume of model oil was increased from 5 to 1000 mL with S content of 1000 ppm indicated that about 99 % sulfur removal can be achieved in 40 mins in an ionic‐liquid emulsion system. To the best of our knowledge, the (DDA)₉LaW₁₀/[omim]PF₆ catalyst system with H₂O₂ as oxidant is one of the most efficient desulfurization systems reported so far.     

Controlling the Self‐Assembly of a Mixed‐Metal Mo/V–Selenite Family of Polyoxometalates

Five mixed‐metal mixed‐valence Mo/V polyoxoanions, templated by the pyramidal SeO₃^2? heteroanion have been isolated: K₁₀[Mo^VI₁₂V^V₁₀O₅₈(SeO₃)₈]?18 H₂O ( 1 ), K₇[Mo^VI₁₁V^V₅V^IV₂O₅₂(SeO₃)]?31 H₂O ( 2 ), (NH₄)₇K₃[Mo^VI₁₁V^V₅V^IV₂O₅₂(SeO₃)(Mo^V₆V^V‐ O₂₂)]?40 H₂O ( 3 ), (NH₄)₁₉K₃[Mo^VI₂₀V^V₁₂V^IV₄O₉₉(SeO₃)₁₀]?36 H₂O ( 4 ) and [Na₃(H₂O)₅{Mo_18?xV_xO₅₂(SeO₃)} {Mo_9?yV_yO₂₄(SeO₃)₄}] ( 5 ). All five compounds were characterised by single‐crystal X‐ray structure analysis, TGA, UV/Vis and FT‐IR spectroscopy, redox titrations, and elemental and flame atomic absorption spectroscopy (FAAS) analysis. X‐ray studies revealed two novel coordination modes for the selenite anion in compounds 1 and 4 showing η,μ and μ,μ coordination motifs. Compounds 1 and 2 were characterised in solution by using high‐resolution ESI‐MS. The ESI‐MS spectra of these compounds revealed characteristic patterns showing distribution envelopes corresponding to 2? and 3? anionic charge states. Also, the isolation of these compounds shows that it may be possible to direct the self‐assembly process of the mixed‐metal systems by controlling the interplay between the cation “shrink‐wrapping” effect, the non‐conventional geometry of the selenite anion and fine adjustment of the experimental variables. Also a detailed IR spectroscopic analysis unveiled a simple way to identify the type of coordination mode of the selenite anions present in POM‐based architectures.     

Self‐Assembly of [B‐SbW9O33]9− Subunit with Transition Metal Ions (Mn2+, Cu2+, Co2+) in Aqueous Solution: Syntheses,Structures and Magnetic Properties of Sandwich Type Polyoxometalates with Subvalent SbIII Heteroatom

Rational self‐assembly of Sb₂O₃ and Na₂WO₄, or (NH₄)₁₈[NaSb₉W₂₁O₈₆] with transition‐metal ions (Mn²⁺, Cu²⁺, Co²⁺), in aqueous solution under controlled conditions yield a series of sandwich type complexes, namely, Na₂H₂[Mn_2.5W_1.5(H₂O)₈(B‐β‐SbW₉O₃₃)₂]?32 H₂O (1) , Na₄H₇[Na₃(H₂O)₆Mn₃(μ‐OAc)₂(B‐α‐SbW₉O₃₃)₂]?20 H₂O (OAc=acetate anion) (2) , NaH₈[Na₂Cu₄Cl(B‐α‐SbW₉O₃₃)₂]?21 H₂O (3) , Na₈K[Na₂K(H₂O)₂{Co(H₂O)}₃(B‐α‐SbW₉O₃₃)₂]? 10 H₂O (4) , and Na₅H[{Co(H₂O)₂}₃W(H₂O)₂(B‐β‐SbW₉O₃₃)₂]?11.5 H₂O (5) . These structures are determined by using the X‐ray diffraction technique and further characterized by obtaining IR spectra and performing elemental analysis. Structure analysis reveals that polyoxoanions in 1 and 5 comprise of two [B‐β‐SbW₉O₃₃]^9? building units, whereas 2 , 3 , and 4 consist of two isomerous [B‐α‐SbW₉O₃₃]^9? building blocks, which are all linked by different transition‐metal ions (Mn²⁺, Cu²⁺, or Co²⁺) with different quantitative nuclearity. It should be noted that compound 2 represents the first one‐dimensional sinusoidal chain based on sandwich like tungstoantimonate building blocks through the carboxylate‐bridging ligands. Additionally, 3 is constructed from sandwiched anions [Na₂Cu₄Cl(B‐α‐SbW₉O₃₃)₂]^9? linked to each other to form an infinitely extended 2D network, whereas 5 shows an interesting 3D framework built up from offset sandwich type polyoxoanion [{Co(H₂O)₂}₃W(H₂O)₂(B‐β‐SbW₉O₃₃)₂]^6? linked by Co²⁺ and Na⁺ ions. EPR studies performed at 110 K and room temperature reveal that the metal cations (Mn²⁺, Cu²⁺, Co²⁺) reside in a square‐pyramidal geometry in 2 , 3 , and 4 . The magnetic behavior of 1 – 4 suggests the presence of weak antiferromagnetic coupling interactions between magnetic metal centers with the exchange integral J=?0.552 cm^?1 in 2 .     

Surfactant‐Dependent Charge Transfer between Polyoxometalates and Single‐Walled Carbon Nanotubes: A Fluorescence Spectroscopic Study

Hybridizations of redox‐active polyoxometalates (POMs) with single‐walled carbon nanotubes (SWNTs) have been widely investigated for their diverse applications. For the purpose of constructing high‐quality electronic devices, controlling charge transfer within POM/SWNT hybrids is an inevitable issue. As determined by means of fluorescence spectroscopy, electron transfer between SWNTs and a common POM dopant, phosphomolybdic acid (PMo₁₂), can be tuned simply by an alteration of nanotube surfactant type from anionic to nonionic. The mechanism is attributed to the influence of surfactant type on the stabilization of the electron donor–acceptor hybrid and effect of surfactant–nanotube interactions. These results will be important to control charge‐transport behavior in nanohybrids consisting of carbon nanotubes.     

Optically Active Liquid Crystalline Polyoxometalates via Electrostatic Encapsulation with Cholesterol‐Containing Amphiphile

A novel cholesterol‐containing amphiphile was designed and prepared in the study, which is a room‐temperature ionic liquid crystal over a broad temperature range with pronounced chiroptical properties. Four types of inorganic polyoxometalates (PMs) with different numbers of charges were encapsulated by the chiral amphiphile. The incorporation of chiral organic cations triggers achiral PMs in the complexes to show induced chirality through intermolecular interactions, as demonstrated by circular dichroism spectroscopy. The electrostatic encapsulation with mesomorphic promoters provides the inorganic PMs with liquid crystalline behavior, characterized by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. The strategy applied herein represents a unique example of liquid crystalline PM complexes with optical activity.     

Water‐ and Temperature‐Triggered Reversible Structural Transformation of Tetranuclear Cobalt(II) Cores Sandwiched by Polyoxometalates

Although stimuli‐responsive structural transformations of inorganic materials have attracted considerable attention because of their potential use as functional switchable materials, multinuclear metal cores frequently suffer from unexpected dissociation of metal cations and/or irreversible transformations into infinite structures. In this study, we describe the successful demonstration of the water‐ and temperature‐triggered reversible structural transformation between cubane‐ and planar‐type tetranuclear Co^II cores sandwiched by polyoxometalates. The arrangements and coordination geometries of the Co^II cations were interconverted by simple hydration and dehydration, resulting in the manipulation of the magnetic and optical properties of these compounds. Moreover, this system showed unique thermochromism through temperature‐dependent reversible structural interconversion.     

Intramolecular Anion Effect in Polyoxometalate‐Based Organocatalysts: Reactivity Enhancement and Chirality Transfer by a Metal Oxide–Organic Cation Interaction

An α₁‐Dawson polyanion bearing a lateral side chain with a 4‐aminopyridine end group was synthesized. This organopolyoxometalate catalyzes the addition of indenyl allyl silanes to cinnamoyl fluorides. The polyanionic framework influences the organocatalyst activity and selectivity. A moderate but nonzero chirality transfer from the chiral inorganic framework to the organic substrate was observed.