The effects of metabolite molecules produced by drinking water-isolated bacteria on their single and multispecies biofilms

The elucidation of the mechanisms by which diverse species survive and interact in drinking water (DW) biofilm communities may allow the identification of new biofilm control strategies. The purpose of the present study was to investigate the effects of metabolite molecules produced by bacteria isolated from DW on biofilm formation. Six opportunistic bacteria, viz. Acinetobacter calcoaceticus, Burkholderia cepacia, Methylobacterium sp., Mycobacterium mucogenicum, Sphingomonas capsulata and Staphylococcus sp. isolated from a drinking water distribution systems (DWDS) were used to form single and multispecies biofilms in the presence and absence of crude cell-free supernatants produced by the partner bacteria. Biofilms were characterized in terms of mass and metabolic activity. Additionally, several physiological aspects regulating interspecies interactions (sessile growth rates, antimicrobial activity of cell-free supernatants, and production of iron chelators) were studied to identify bacterial species with biocontrol potential in DWDS. Biofilms of Methylobacterium sp. had the highest growth rate and M. mucogenicum biofilms the lowest. Only B. cepacia was able to produce extracellular iron-chelating molecules. A. calcoaceticus, B. cepacia, Methylobacterium sp. and M. mucogenicum biofilms were strongly inhibited by crude cell-free supernatants from the other bacteria. The crude cell-free supernatants of M. mucogenicum and S. capsulata demonstrated a high potential for inhibiting the growth of counterpart biofilms. Multispecies biofilm formation was strongly inhibited in the absence of A. calcoaceticus. Only crude cell-free supernatants produced by B. cepacia and A. calcoaceticus had no inhibitory effects on multispecies biofilm formation, while metabolite molecules of M. mucogenicum showed the most significant biocontrol potential.     

Hydrothermal production and characterization of protein and amino acids from silk waste

Non-catalytic hydrothermal decomposition of sericin and fibroin from silk waste into useful protein and amino acids was examined in a closed batch reactor at various temperatures, reaction times, and silk to water ratios to examine their effects on protein and amino acid yields. For the decomposition of sericin, the highest protein yield was found to be 0.466 mg protein/mg raw silk, obtained after 10 min hydrothermal reaction of silk waste at 1:100 silk to water ratio at 120 degrees C. The highest amino acid yield was found to be 0.203 mg amino acids/mg raw silk, obtained after 60 min of hydrothermal reaction of silk waste at 1:20 silk to water ratio at 160 degrees C. For the hydrothermal decomposition of fibroin, the highest protein yield was 0.455 mg protein/mg silk fibroin (1:100, 220 degrees C, 10 min) and that of amino acids was 0.755 mg amino acids/mg silk fibroin (1:50, 220 degrees C, 60 min). The rate of silk fibroin decomposition could be described by surface reaction kinetics. The soluble reaction products were freeze-dried to obtain sericin and fibroin particles, whose conformation and crystal structure of the particles were shown to differ from the original silk materials, particularly in the case of fibroin, in which the change from beta-sheet conformation to alpha-helix/random coil was observed.     

A high molecular weight silk fibroin scaffold that resists degradation and promotes cell proliferation

The regulation of the biodegradation rate of 3D-regenerated silk fibroin scaffolds and the avoidance of premature collapse are important concerns for their effective applications in tissue engineering. In this study, bromelain, which is specific to sericin, was used to remove sericin from silk, and high molecular weight silk fibroin was obtained after the fibroin fibers were dissolved. Afterwards, a 3D scaffold was prepared via freeze-drying. The Sodium dodecyl sulfate–polyacrylamide gel electrophoresis results showed that the average molecular weight of the regenerated silk fibroin prepared by using the bromelain-degumming method was approximately 142.2 kDa, which was significantly higher than that of the control groups prepared by using the urea- and Na₂CO₃-degumming methods. The results of enzyme degradation in vitro showed that the biodegradation rate and internal three-dimensional structure collapse of the bromelain-degumming fibroin scaffolds were significantly slower than those of the two control scaffolds. The proliferation activity of human umbilical vein vascular endothelial cells inoculated in bromelain-degumming fibroin scaffolds was significantly higher than that of the control scaffolds. This study provides a novel preparation method for 3D-regenerated silk fibroin scaffolds that can effectively resist biodegradation, continuously guide cell growth, have good biocompatibility, and have the potential to be used for the regeneration of various connective tissues.     

Fibroin and Sericin from Bombyx mori Silk Stimulate Cell Migration through Upregulation and Phosphorylation of c-Jun

Wound healing is a biological process directed to the restoration of tissue that has suffered an injury. An important phase of wound healing is the generation of a basal epithelium able to wholly replace the epidermis of the wound. A broad range of products derived from fibroin and sericin from Bombyx mori silk are used to stimulate wound healing. However, so far the molecular mechanism underlying this phenomenon has not been elucidated. The aim of this work was to determine the molecular basis underlying wound healing properties of silk proteins using a cell model. For this purpose, we assayed fibroin and sericin in a wound healing scratch assay using MDA-MB-231 and Mv1Lu cells. Both proteins stimulated cell migration. Furthermore, treatment with sericin and fibroin involved key factors of the wound healing process such as upregulation of c-Jun and c-Jun protein phosphorylation. Moreover, fibroin and sericin stimulated the phosphorylation of ERK 1/2 and JNK 1/2 kinases. All these experiments were done in the presence of specific inhibitors for some of the cell signalling pathways referred above. The obtained results revealed that MEK, JNK and PI3K pathways are involved in fibroin and sericin stimulated cells migration. Inhibition of these three kinases prevented c-Jun upregulation and phosphorylation by fibroin or sericin. Fibroin and sericin were tested in the human keratinocyte cell line, HaCaT, with similar results. Altogether, our results showed that fibroin and sericin initiate cell migration by activating the MEK, JNK and PI3K signalling pathways ending in c-Jun activation.     

Transgenic modifications of silkworms as a means to obtain therapeutic biomolecules and protein fibers with exceptional properties

Transgenic modification of Bombyx mori silkworms is a benign approach for the production of silk fibers with extraordinary properties and also to generate therapeutic proteins and other biomolecules for various applications. Silk fibers with fluorescence lasting more than a year, natural protein fibers with strength and toughness exceeding that of spider silk, proteins and therapeutic biomolecules with exceptional properties have been developed using transgenic technology. The transgenic modifications have been done primarily by modifying the silk sericin and fibroin genes and also the silk producing glands. Although the genetic modifications were typically performed using the sericin 1 and other genes, newer techniques such as CRISPR/Cas9 have enabled successful modifications of both the fibroin H-chain and L-chain. Such modifications have led to the production of therapeutic proteins and other biomolecules in reasonable quantities at affordable costs for tissue engineering and other medical applications. Transgenically modified silkworms also have distinct and long-lasting fluorescence useful for bioimaging applications. This review presents an overview of the transgenic techniques for modifications of B. mori silkworms and the properties obtained due to such modifications with particular focus on production of growth factors, fluorescent proteins, and high performance protein fibers.     

Role of planktonic and sessile extracellular metabolic byproducts on <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> and <Emphasis Type="Italic">Escherichia coli</Emphasis> intra and interspecies relationships

Bacterial species are found primarily as residents of complex surface-associated communities, known as biofilms. Although these structures prevail in nature, bacteria still exist in planktonic lifestyle and differ from those in morphology, physiology, and metabolism. This study aimed to investigate the influence of physiological states of Pseudomonas aeruginosa and Escherichia coli in cell-to-cell interactions. Filtered supernatants obtained under planktonic and biofilm cultures of each single species were supplemented with tryptic soy broth (TSB) and used as the growth media (conditioned media) to planktonic and sessile growth of both single- and two-species cultures. Planktonic bacterial growth was examined through OD₆₄₀ measurement. One-day-old biofilms were evaluated in terms of biofilm biomass (CV), respiratory activity (XTT), and CFU number. Conditioned media obtained either in biofilm or in planktonic mode of life triggered a synergistic effect on planktonic growth, mainly for E. coli single cultures growing in P. aeruginosa supernatants. Biofilms grown in the presence of P. aeruginosa biofilms-derived metabolites presented less mass and activity. These events highlight that, when developed in biofilm, P. aeruginosa release signals or metabolites able to prejudice single and binary biofilm growth of others species and of their own species. However, products released by their planktonic counterparts did not impair biofilm growth or activity. E. coli, living as planktonic or sessile cultures, released signals and metabolites or removed un-beneficial compounds which promoted the growth and activity of all the species. Our findings revealed that inter and intraspecies behaviors depend on the involved bacteria and their adopted mode of life.     

Effect of soil bacteria on hyphal growth of the arbuscular mycorrhizal fungus Glomus claroideum

The effect of 46 bacterial strains isolated from tilled and non-tilled soils collected at 3 localities on the growth of intraradical hyphae of the arbuscular mycorrhizal (AM) fungusGlomus claroideum was demonstrated. A larger number of stimulatory bacterial isolates was obtained from tilled soils, but the bacteria showing the strongest stimulation of hyphal growth were isolated from a soil that had not been cultivated. Isolates obtained from hyphae of AM fungi showed no substantial stimulatory effects, but produced more uniform effects on hyphal growth than the isolates of bacteria obtained from soil. Bacterial cenoses present in 3 different soils differ significantly in their effects on AM fungi.     

Colonization behavior of bacterium Burkholderia cepacia inside the Oryza sativa roots visualized using green fluorescent protein reporter

Colonization behavior of endophytic bacteria Burkholderia cepacia strains RRE-3 and RRE-5 was studied in the seedlings of rice variety NDR97 using confocal laser scanning microscopy under controlled laboratory and greenhouse conditions. For studying colonization pattern, bacterial strains were tagged with pHRGFPGUS plasmid. The role of bacterial strains (both gfp/gus-tagged and untagged) in growth promotion was also studied. After coming into contact with the host root system the bacteria showed an irregular spreading. Dense colonization was observed on the primary and secondary roots and also on the junction of emergence of the lateral roots. Results showed that the colonization pattern of Burkholderia cepacia strains was similar to that of other endophytic bacteria isolated from non-legumes. Burkholderia cepacia got entry inside the root at the sites of emergence of lateral roots, without formation of infection threads as in the case of symbiotic rhizobacteria. Observations suggested that the endophytic bacterial strains RRE-3 and RRE-5 entered inside the rice roots in a progressive manner. Bacteria were found to line up along the intercellular spaces of adjoining epidermal cells adjacent to the lateral root junction, indicating endophytic colonization pattern of Burkholderia cepacia strains. Experiments with the rice seedlings inoculated with RRE-3 and RRE-5 strains revealed that both strains enhanced plant growth considerably when observed under laboratory and greenhouse conditions and produced significantly higher plant biomass. No considerable difference was observed between the gfp/gus-tagged and non-gfp/gus-tagged strains in the plant growth experiments both in the laboratory and greenhouse conditions.     

Development of an obligate anaerobe specific biocide

Summary Anaerobic bacteria, such as sulfate-reducing bacteria and clostridia, are capable of generating H₂S and organic acids which corrode metallurgy resulting in millions of dollars of damage to industry annually. The bacteria are obligate anaerobes which grow typically on equipment surfaces under deposits such as biofilms. A successful method of penetrating biofilm and killing the anaerobic bacteria specifically has not been previously presented. We have investigated whether a blend of 1-(2-hydroxyethyl)-2-methyl-5-nitroimidazole (metronidazole) and a biodispersant would killDesulfovibrio, Desulfotomaculum, andClostridium species grown in the laboratory and in field applications. We found the blend significantly reduced the anaerobes in laboratory cultures. However, in a bioreactor designed to induced a high level of biofilm production and enhance underdeposit growth of anaerobic bacteria, a 40–58% increase in the antibiotic-biodispersant blend concentration was required. The metronidazole blend killed obligate anaerobic bacteria specifically but was non-toxic to aerobic bacteria and fungi. These results were confirmed in cooling tower field trial studies.     

Interfacial water and its potential role in the function of sericin against biofouling

Abstract

Silk sericin is a globular protein whose resistance against fouling is important for applications in biomaterials and water-purification membranes. Here it is shown how sericin generates a water-exclusion zone that may facilitate antifouling behavior. Negatively charged microspheres were used to mimic the surface charge and hydrophobic domains in bacteria. Immersed in water, regenerated silk sericin formed a 100-µm-sized exclusion zone (for micron-size foulants), along with a proton gradient with a decrease of >2?pH-units. Thus, when in contact with sericin, water molecules near the surface restructure to form a physical exclusionary barrier that might prevent biofouling. The decreased pH turns the aqueous medium unviable for neutrophilic bacteria. Therefore, resistance to biofouling seems explainable, among other factors, on the basis of water-exclusionary phenomena. Furthermore, sericin may play a role in triggering the fibroin assembly process by lowering the pH to the required value.     

Accumulation of ACE Inhibitory Tripeptides,Val-Pro-Pro and Ile-Pro-Pro,in Vascular Endothelial Cells

Topsoil samples were collected from 36 different paddy fields in West Japan. Each soil sample was incubated with a basal salt-medium containing 0.2% OPPEO. Twelve samples possessed OPPEO-degrading activity, from which twelve cultures of OPPEO-degrading bacteria were isolated. The isolated bacteria grew on a medium containing 0.2% OPPEO as the sole carbon source, and OP2EO and OP3EO were accumulated in the medium under aerobic conditions. OP1EO and octylphenol, which have often been identified in surface water together with OP2EO, were not observed in this experiment. The bacterial isolates were gram negative and tentatively identified as Pseudomonas putida (10 isolates) and Burkholderia cepacia (one isolate) by BIOLOG and 16S rDNA RFLP analyses.     

Interactions among endophytic bacteria and fungi: Effects and potentials

Plants benefit extensively by harbouring endophytic microbes. They promote plant growth and confer enhanced resistance to various pathogens. However, the way the interactions among endophytes influence the plant productivity has not been explained. Present study experimentally showed that endophytes isolated from rice (Oryza sativa) used as the test plant produced two types of interactions; biofilms (bacteria attached to mycelia) and mixed cultures with no such attachments. Acidity, as measured by pH in cultures with biofilms was higher than that of fungi alone, bacteria alone or the mixed cultures. Production of indoleacetic acid like substances (IAAS) of biofilms was higher than that of mixed cultures, fungi or bacteria. Bacteria and fungi produced higher quantities of IAAS than mixed cultures. In mixed cultures, the potential of IAAS production of resident microbes was reduced considerably. There was a negative relationship between IAAS and pH of the biofilms, indicating that IAAS was the main contributor to the acidity. However, such a relationship was not observed in mixed cultures. Microbial acid production is important for suppressing plant pathogens. Thus the biofilm formation in endophytic environment seems to be very important for healthy and improved plant growth. However, it is unlikely that an interaction among endophytes takes place naturally in the endophytic environment, due to physical barriers of plant tissues. Further, critical cell density dependant quorum sensing that leads to biofilm formation may not occur in the endophytic environment as there is a limited space. As suchin vitro production and application of beneficial biofilmed inocula of endophytes are important for improved plant production in any agro-ecosystem. The conventional practice of plant inoculation with monocultures or mixed cultures of effective microbes may not give the highest microbial effect, which may only be achieved by biofilm formation.     

Interaction of <Emphasis Type="Italic">Klebsiella oxytoca</Emphasis> and <Emphasis Type="Italic">Burkholderia cepacia</Emphasis> in Dual-Species Batch Cultures and Biofilms as a Function of Growth Rate and Substrate Concentration

Dual-species microbial interactions have been extensively reported for batch and continuous culture environments. However, little research has been performed on dual-species interaction in a biofilm. This research examined the effects of growth rate and substrate concentration on dual-species population densities in batch and biofilm reactors. In addition, the feasibility of using batch reactor kinetics to describe dual-species biofilm interactions was explored. The scope of the research was directed toward creating a dual-species biofilm for the biodegradation of trichloroethylene, but the findings are a significant contribution to the study of dual-species interactions in general. The two bacterial species used were Burkholderia cepacia PR1-pTOM_31c, an aerobic organism capable of constitutively mineralizing trichloroethylene (TCE), and Klebsiella oxytoca, a highly mucoid, facultative anaerobic organism. The substrate concentrations used were different dilutions of a nutrient-rich medium resulting in dissolved organic carbon (DOC) concentrations on the order of 30, 70, and 700 mg/L. Presented herein are single- and dual-species population densities and growth rates for these two organisms grown in batch and continuous-flow biofilm reactors. In batch reactors, planktonic growth rates predicted dual-species planktonic species dominance, with the faster-growing organism (K. oxytoca) outcompeting the slower-growing organism (B. cepacia). In a dual-species biofilm, however, dual-species planktonic growth rates did not predict which organism would have the higher dual-species biofilm population density. The relative fraction of each organism in a dual-species biofilm did correlate with substrate concentration, with B. cepacia having a greater proportional density in the dual-species culture with K. oxytoca at low (30 and 70 mg/L DOC) substrate concentrations and K. oxytoca having a greater dual-species population density at a high (700 mg/L DOC) substrate concentration. Results from this research demonstrate the effectiveness of using substrate concentration to control population density in this dual-species biofilm.     

Effect of polyamines on mechanical and structural properties of Bombyx mori silk

Silkworm, Bombyx mori (B. mori) belongs to the Lepidoptera family. The silk produced from this insect, mulberry silk, gained lot of importance as a fabric. Silk is being exploited as a biomaterial due to its surprising strength and biocompatibility. Polyamines (PA) are important cell growth regulators. In the present work the effect of treatment of polyamines, putrescine (Put), spermidine (Spd), and spermine (Spm) on the quantity and quality of silk produced was assessed. Results showed that exogenous feeding of Spd at a concentration of 50 µM increased fiber length significantly. Analysis by Fourier transform infrared (FTIR) on the properties of silk obtained from Spd treated silkworms revealed an increase in percentage of absorption with no difference in peak positions of amide I and amide III groups. Scanning electron microscopy (SEM) revealed an increase in diameter of silk. Further, analysis at molecular level showed an increase in fibroin expression in Spd treated silk glands. However, the Spd treatment showed no significant difference with respect to fibroin to sericin ratio per unit weight of cocoon, silk tenacity, and percent elongation. Thus, the present results show that polyamine treatment would influence silk quality at structural, mechanical, and molecular level in the Bombyx mori, which can be exploited in silk biomaterial production.     

Establishment and Early Succession of a Multispecies Biofilm Composed of Soil Bacteria

Most soil bacteria are likely to be organized in biofilms on roots, litter, or soil particles. Studies of such biofilms are complicated by the many nonculturable species present in soil, as well as the interspecific bacterial interactions affecting biofilm biology. We in this study describe the development of a biofilm flow model and use this system to establish an early (days 1–7) flow biofilm of soil bacteria from agricultural soil. It was possible to follow the succession in the early flow biofilm by denaturing gradient gel electrophoresis (DGGE) analysis, and it was demonstrated that the majority of strains present in the biofilm were culturable. We isolated and identified nine strains, all associated with unique DGGE profiles, and related their intrinsic phenotypes regarding monospecies biofilm formation in microtiter plates and planktonic growth characteristics to the appearance of the strains in the flow biofilm. The ability of the strains to attach to and establish biofilm in microtiter plates was reflected in their flow biofilm appearance, whereas no such reflection of the planktonic growth characteristics in the flow biofilm appearance was observed. One strain-specific synergistic interaction, strongly promoting biofilm formation of two strains when cultured together in a dual-species biofilm, was observed, indicating that some strains promote biofilm formation of others. Thus, the biofilm flow model proved useful for investigations of how intrinsic phenotypic traits of individual species affect the succession in an early soil biofilm consortium.     

Tyrosinase-catalyzed grafting of sericin peptides onto chitosan and production of protein-polysaccharide bioconjugates

The capability of Agaricus bisporus tyrosinase to catalyze the oxidation of tyrosine residues of silk sericin was studied under homogeneous reaction conditions, by using sericin peptides purified from industrial wastewater as the substrate. Tyrosinase was able to oxidize about 57% of sericin-bound tyrosine residues. The reaction rate was higher than with silk fibroin, but lower than with other silk-derived model peptides, i.e. tryptic and chymotryptic soluble peptide fractions of silk fibroin, suggesting that the size and the molecular conformation of the substrate influenced the kinetics of the reaction. The concentration of tyrosine in oxidized sericin samples decreased gradually with increasing the enzyme-to-substrate ratio. The average molecular weight of sericin peptides significantly increased by oxidation, indicating that cross-linking occurred via self-condensation of o-quinones and/or coupling with the free amine groups of lysine and, probably, with sulfhydryl groups of cysteine. The high temperature shift of the main thermal transitions observed in the differential scanning calorimetry curves confirmed the formation of peptide species with higher molecular weight and higher thermal stability. Fourier transform-infrared spectra of oxidized sericin samples showed slight changes related to the loss of tyrosine and formation of oxidation products. Oxidized sericin peptides were able to undergo non-enzymatic coupling with chitosan. Infrared spectra provided clear evidence of the formation of sericin-chitosan bioconjugates under homogeneous reaction conditions. Spectral changes in the NH stretching region seem to support the formation of bioconjugates via the Michael addition mechanism.     

Biofilter performance and characterization of a biocatalyst degrading alkylbenzene gases

A biofilter treating alkylbenzene vapors was characterized for its optimal running conditions and kinetic parame-ters. Kinetics of the continuous biofilter were compared to batch kinetic data obtained with biofilm samples as well as with defined microbial consortia and with pure culture isolates from the biofilter. Both bacteria and fungi were present in the bioreactor. Five strains were isolated. Two bacteria, Bacillus and Pseudomonas, were shown to be dominant, as well as a Trichosporon strain which could, however, hardly grow on alkylbenzenes in pure culture. The remaining two strains were most often overgrown by the other three organisms in liquid phase batch cultures μ _max, K_S, K_I values and biodegradation rates were calculated and compared for the difterent mixed and pure cultures. Since filter bed acidification was observed during biofiltration studies reaching a pH of about 4, experiments were also undertaken to study the influence of pH on performance of the different cultures. Biodegradation and growth were possible in all cases, over the pH range 3.5–7.0 at appreciable rates, both with mixed cultures and with pure bacterial cultures. Under certain conditions, microbial activity was even observed in the presence of alkylbenzenes down to pH 2.5 with mixed cultures, which is quite unusual and explains the ability of the present biocatalyst to remove alkylbenzenes with high efficiency in biofilters under acidic conditions.