含低沸点、非水溶性有机溶剂废气的处理方法

该发明公开了一种含低沸点、非水溶性有机溶剂废气（简称废气）的处理方法。该方法的具体步骤为：将待处理的废气经过含吸收剂a的吸附塔Ⅰ，以去除废气中的有机溶剂，再经过含吸收剂b的吸附塔Ⅱ，吸收剂b可吸收溶解经过吸附塔Ⅰ处理的气体中携带出来的余量吸收剂a，使气体成为达标的排放气体，同时从吸附塔Ⅱ排出的由吸收剂a和吸收剂b形成的乳化液再经过分离处理，分离出吸收剂a和吸收剂b，使其再回收重复利用。该方法工艺流程简单，操作方便，既节约能源，降低生产成本，     

应用烟气脱硫技术控制燃煤工业锅炉SO2污染--中国燃煤工业锅炉SO2污染综合防治对策(七)

介绍旋流板塔及其在燃煤工业锅炉烟气脱硫中的应用。研究表明，旋流板塔以气液接触面积大、结构简单、压力降较小。操作稳定为其主要特点。但是，脱硫工艺过程不合理而生成不稳定化合物亚硫酸盐叉可造成严重的二次污染。     

烟气生物脱硫技术的应用

介绍了宜兴协联热电有限公司2×125 MW热电机组采用的烟气生物脱硫工艺,着重阐述了洗涤塔、厌氧反应器、好氧反应器等核心设备的工作原理,并做了简单的技术经济分析,为相似装置的设计提供参考.     

塔式湿法脱硫的工艺比较

对湿法脱硫中的填料塔、鼓泡塔、喷淋塔和液柱塔进行了工艺和结构上的比较，并分析了它们的优缺点。     

涂料溶剂回收工艺及设备

本文探讨了烘烤涂料过程中所排溶剂蒸汽对环境污染的控制方法;提出了溶剂回收的较佳工艺——旋流板回收工艺;介绍了回收设备,并着重叙述了旋流板塔的设计计算方法。应用实例表明,该工艺具有回收率高、处理量大、设备简单、操作方便的特点,且有一定的环境、经济和社会效益。     

冷却生物氧化塔的技术改进和经济分析

改进后的横流冷却生化曝气塔对合成氨厂造气废水可同时进行冷却,一次生化和二次生化处理。与一般横流冷却塔相比,流程简单,管理方便,占地少;造价仅增加12—34％.     

采用花岗岩水膜除尘器燃煤锅炉脱硫和除尘的工艺改造

为了使现有花岗岩水膜除尘器的燃煤锅炉烟气净化达标排放,在不更换水膜除尘器的前提下,探讨和比较了后继烟气吸收装置喷淋塔和鼓泡塔的脱硫和除尘机理,提出改进措施。该技术具有工艺流程简单,建设和运行成本低,适用于由于历史原因仍有相当大数量使用的花岗岩水膜除尘器的烟气净化工艺路线的改造。     

烟气脱硫系统的吸收塔及停留时间

介绍了烟气脱硫系统中三种主要的吸收塔类型,及烟气在吸收塔中停留时间和喷淋吸收区高度的计算方法。简述了液气比与气速、烟气中SO2含量的关系,并列举了喷淋塔、动力波塔和平流塔等工程实例。     

化学法清洗脱硫塔与脱碳塔

合成氨厂半水煤气脱硫塔、变换气脱硫塔及脱碳塔常发生堵塔等现象,尤以半水煤气脱硫塔更为常见,变换气脱硫塔次之,严重影响了生产的正常进行。造成堵塔的因素比较复杂,与脱硫塔内所用填料、脱硫药剂、脱硫液中悬浮硫的多少及生产工艺条件等有关。在半水煤气脱硫中,使用烤胶及浓度高的V2O5脱硫液,发生堵塔的几率比使用其它脱硫药剂相对较大。有些合成氨厂采用降低烤胶、V2O5的浓度,加大脱硫塔直径及增加脱硫液的循环量的方法,以减少脱硫塔发生堵塔的可能性,取得了较好的效果。     

石灰石/石灰-石膏湿法脱硫几种反应塔的比较

石灰石／石灰－石膏湿法烟气脱硫是控制二氧化硫排放的最常用方法。通过对该方法几种主要工艺及反应塔的比较,研究了喷淋塔,格栅塔,鼓泡塔和液柱塔在结构与工艺上的差异,以及它们在中国的实际应用,分析了各种脱硫反应塔的优缺点,并由此归纳出脱硫反应塔发展的趋势,研究结果将为脱硫工艺以及脱硫塔的选择提供依据和参考。     

冲天炉烟气除尘

采用湿法除尘,在烟气管道内设置喷嘴,使烟气充分加湿和降温后再进入立式文丘里,旋流析除尘器,消除了ＣＯ爆炸危险,在冲天炉上部烟囟顶端设安全２盖板,以保证生产的正常进行;烟气经湿式除尘后达到排放标准。     

尿素生产中Hydro流化床造粒工艺及其粉尘处理

介绍了海南富岛化工有限公司Ｈｙｄｒｏ流化床造粒工艺及其粉尘处理技术,将该工艺与传统塔式造粒工艺作了比较,并对运行中的一些问题提出了解决办法。     

煤场防风抑尘网抑尘效果研究

随着国家环保要求越来越高,火电厂煤场扬尘问题受到越来越多的关注。防风抑尘网作为治理煤场扬尘的有效技术,日益得到广泛的应用。论述了煤场起尘机理、起尘风速及起尘量估算、煤场扬尘预测模式,综合研究了防风抑尘网起尘机理及抑尘效果,提出了起尘风速及起尘量估算推荐公式、煤场扬尘预测推荐模式,并通过数值模拟计算与实测数据,对防风抑尘网抑尘效果进行了分析。     

Environmental Conditions of Dust Events in Northern China during 2000–2001

To investigate the large-scale environmental conditions of duststorms occurring in Northern China, a synoptic situation of tendust events in Northern China during 2000–2001 was composed andits dynamic features were identified. The composite synoptic situation showed that the occurrence of the ten dust events was associated with the eastward movement of a strong cold high fromMongolia, and the development of a cyclone in Northeast China, which caused the pressure gradient to intensify considerably in Northern China. The upper level circulation revealed that a 500 hPa trough developed rapidly above Northern China, and diagnosis showed that composite ascending motion was pronouncedabove the Siberian district. The change of vertical motion in themiddle and low troposphere above Mongolia was also related to theoccurrence of the ten dust events. When the descendingcurrent, 12 hr before the occurrence, was completely replacedby the ascending current, the instable atmospheric stratificationof the lower troposphere enabled dry dust to be transported from the surface to high altitudes toward Northern China.     

Discriminate Analysis for Dust Storm Prediction in the Gobi and Steppe Regions in Mongolia

A discriminate analysis method for probability forecast of dust storms in Mongolia has been developed. The prediction method uses data recorded at 23 meteorological stations in the Gobi and steppe regions of Mongolia, including surface air pressure and geo-potential height at the 500-hPa level on grid points, and weather maps from 1975 to 1990. Weather elements such as air temperature, pressure, geo-potential height etc, which influence the formation of dust storms, are prepared as predictors. To select the most informative/important predictors (variables), we used a mean correlation matrix of variables together with the Mahalonobis distance, and correlation coefficients between dust storms and predictors with an orthogonalization for removing correlated predictors. The most informative predictors for dust storm prediction are intensities of surface cyclones and migratory anticyclones, passage of cold fronts, the horizontal gradients of the surface air pressure in the cold frontal zone, cyclonic circulations from the ground surface up to the 500-hPa level, the geo-potential height at 500-hPa level and its temporal changes. Selected predictors are used in discriminate analysis for formulating dust storm prediction equations. Sandstorm data have been classified into three classes, viz., strong, moderate and weak dust storms, depending on their intensities, durations and areas covered. Predictions of the probabilities of dust storm occurrence use the prediction equations for each class. The prediction is made from 12 hours to 36 hours. Verification of the probability forecasts of dust storms is also shown. The accuracy of forecasts is 72.2–79.9% with the data used for developing equations (dependent variables), in contrast to 67.1–72.0% with unrelated data for deriving equations (independent variables).     

防风抑尘网设计要点及参数的确定

介绍了堆场起尘、防风抑尘网抑尘的机理和国内外防风抑尘网研究结果,结合实际工程设计的经验,分析了防风抑尘网设计要点和主要参数,提出防风抑尘网设计的意见和建议。     

The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

Settled dust has been collected inside the main foyers ofthree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a streetcanyon used almost exclusively by heavy duty dieselvehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis byscanning electron microscope and energy dispersive X-rayanalysis. Using these analytical techniques, individualparticle analysis was undertaken for morphology andchemistry. Seasonal variations and variations due tolocation were observed in both the morphologicalmeasurements and chemical analysis. Many of the differencesappear attributable to the influence of road traffic, inparticular, the heavy duty diesel vehicles, travellingalong the street canyon.     

Long Range Transport of Asian Dust from Dust Storms and its Impact on Japan

We simulated the long range transport of dust emitted from dust storms that occurred in China by using a global three-dimensional chemical transport model. A modified dust emission flux scheme and a nonlocal diffusion scheme for determining the atmospheric eddy diffusivity in the atmospheric boundary layer were implemented to improve the chemical transport model. We examined the dust transport by comparing the model results with TOMS satellite images. The model calculated monthly total deposition of dust masses were used for comparison with the measurements collected at sampling stations in Japan, and good agreement was found. The model generally reproduced the temporal and spatial variations of dust reasonably well.     

烟尘浓度分布对二次扬尘影响的探讨

电除尘器内电场断面烟尘浓度呈非均匀性分布,它是产生振打二次扬尘的重要原因之一,通过改善电场内部气流分布状况和使用出口向上的出气箱,可以减少振打二次扬尘,从而达到电除尘器高效除尘的目的。