Heavy metal contamination of soils and waters in and around the Imcheon Au–Ag mine,Korea

The heavy metal contamination of soils and waters by metalliferous mining activities in an area of Korea was studied. In the study area of the Imcheon Au–Ag mine, soils and waters were sampled and analyzed using AAS for Cd, Cu, Pb and Zn. Analysis of HCO₃⁻, F⁻, NO₃⁻ and SO₄²⁻ in water samples was also undertaken by ion chromatography. Elevated concentrations of the metals were found in tailings. The maximum contents in the tailings were 9.4, 229, 6160 and 1640 mg/kg extracted by aqua regia and 1.35, 26.4, 70.3 and 410 mg/kg extracted by 0.1 N HCl solution for Cd, Cu, Pb and Zn, respectively. These metals are continuously dispersed downstream and downslope from the tailings by clastic movement through wind and water. Because of the existence of sulfides in the tailings, a water sample taken on the tailings site was very acidic with a pH of 2.2, with high total dissolved solids (TDS) of 1845 mg/l and electric conductivity (EC) of 3820 μS/cm. This sample also contained up to 0.27, 1.90, 2.80, 53.4, 4,700 mg/l of Cd, Cu, Pb, Zn and SO₄²⁻, respectively. TDS, EC and concentrations of metals in waters decreased with distance from the tailings. The total amount of pulverized limestone needed for neutralizing the acid tailings was estimated to be 46 metric tons, assuming its volume of 45,000 m³ and its bulk density of 1855 kg/m³.     

Heavy metal contamination in the sediment of the Second Songhua River

The Second Songhua River was subjected to a large amount of untreated effluent from petrochemical industries in Jilin City in the 1960s to the 1970s. The objectives of this study were to investigate the mercury and other heavy metal contamination in the sediment of the river. The river bottom sediment was sampled from the river segment between Jilin City to Haerbin City in 2005. Total concentrations of Hg, Cd, Cu, Cr, Pb, Zn, Ni, As, Sc, and major cations （A1, Fe, Mg, Ca, K, Na） in the sediment were measured by atomic fluorescence spectrometer, ICP-MS, and ICP-OES, respectively, following digestion with various acids. We found the concentrations of most elements in the uncontaminated sediment were significantly correlated to those of Sc.     

Origin of epithermal Ag–Au–Cu–Pb–Zn mineralization in Guanajuato, Mexico

The Guanajuato epithermal district is one of the largest silver producers in Mexico. Mineralization occurs along three main vein systems trending dominantly northwest–southeast: the central Veta Madre, the La Luz system to the northwest, and the Sierra system to the east. Mineralization consists dominantly of silver sulfides and sulfosalts, base metal sulfides (mostly chalcopyrite, galena, sphalerite, and pyrite), and electrum. There is a broad zonation of metal distribution, with up to 10 % Cu+Pb+Zn in the deeper mines along the northern and central portions of the Veta Madre. Ore occurs in banded veins and breccias and as stockworks, with gangue composed dominantly of quartz and calcite. Host rocks are Mesozoic sedimentary and intrusive igneous rocks and Tertiary volcanic rocks. Most fluid inclusion homogenization temperatures are between 200 and 300 °C, with salinities below 4 wt.% NaCl equivalent. Fluid temperature and salinity decreased with time, from 290 to 240 °C and from 2.5 to 1.1 wt.% NaCl equivalent. Relatively constant fluid inclusion liquid-to-vapor ratios and a trend of decreasing salinity with decreasing temperature and with increasing time suggest dilution of the hydrothermal solutions. However, evidence of boiling (such as quartz and calcite textures and the presence of adularia) is noted along the Veta Madre, particularly at higher elevations. Fluid inclusion and mineralogical evidence for boiling of metal-bearing solutions is found in gold-rich portions of the eastern Sierra system; this part of the system is interpreted as the least eroded part of the district. Oxygen, carbon, and sulfur isotope analysis of host rocks, ore, and gangue minerals and fluid inclusion contents indicate a hydrothermal fluid, with an initial magmatic component that mixed over time with infiltrating meteoric water and underwent exchange with host rocks. Mineral deposition was a result of decreasing activities of sulfur and oxygen, decreasing temperature, increasing pH, and, in places, boiling.     

Arsenic and antimony contamination in the vicinity of Yata gold mine, Guizhou, China

The ores of the Yata gold mine in China are rich in arsenic and antimony, so the exploitation of this mine may also lead to the release of As and Sb to adjacent environments, such as stream water, stream sediment, soil, plants, and crops. To understand the environmental impact of mine tailings, samples of water, sediment, soil, plant and crop were collected and analyzed. In summer of 2005, the tailings dump was seriously flushed by a heavy flood, and the mine waste was transported far away. Samples were collected in December of 2004 and January of 2006, respectively, and the impact of the flood on the release of toxic elements was evaluated. The result shows that the Yata creek, which drains the mining area, was severely contaminated by As and Sb. The dissolved As and Sb in water are 86-1140 μg/L and 65-370 μg/L, the particulate As and Sb are 38-2100 μg/L and 25-420 μg/L, whereas As and Sb in the sediment are 190-760 μg/g and 69-210 μg/g, respectively. In water environment, As and Sb show a similar feature to SO4^2- since As and Sb exist dominantly as anions--H2AsO4^-, HAsO4^2- and SbO3^-. In contrast to Fe, Cu, Pb, Zn, which migrate mostly in particulate form, As and Sb tend to transport in dissolved form.     

The colloid chemistry of acid rock drainage solution from an abandoned Zn–Pb–Ag mine

Acid rock drainage (ARD) solution from an abandoned ore mine (pH 2.7, SO²⁻₄ concentration 411 mmol/l, Fe concentration 93.5 mmol/l) was investigated by photon correlation spectroscopy, centrifugation, filtration, ultrafiltration, scanning electron microscopy, ICP–MS, AAS, ion chromatography, TOC analysis, and extended X-ray absorption fine structure (EXAFS) spectroscopy. A colloid concentration of ⩾1 g/l was found. The prevailing particle size was <5 nm. Iron, As and Pb were the metal constituents of the colloidal particles. The most probable mineralogical composition of the particles is a mixture of hydronium jarosite and schwertmannite. A small amount of a relatively coarse precipitate was formed in the ARD solution during the months after sampling. The colloid particles are obviously an intermediate in the precipitate formation process. The results suggest that the arsenate is bound to the colloids by the formation of a bidentate binuclear inner-sphere surface complex. However, the transformation of the colloidal material to the more aggregated long-term precipitate results in the incorporation of the arsenate into the interior of the Fe hydroxy sulfate crystal structures. Lead seems to occur as anglesite.     

Preliminary Understanding of Ore Genesis of Zhaxikang Pb–Zn–Ag–Sb Deposit in the North Himalaya

Please?refer?to?the?attachment(s)?for?more?details.     

Sulfur-isotope distribution and contamination related to the Balya Pb–Zn Mine in Turkey

Sulfur-isotope (³⁴S) values and weight (%) of acid-volatile sulfur (AVS), chrome-reducible sulfide (CRS), elemental sulfur (ES), and acid-soluble sulfates were determined in Balya Mine ore rock, mine wastes, and Kocacay River and Lake Manyas sediments. Estimation of isotopic fractionation (³⁴S) between product sulfate and initial CRS (pyrite) was used to evaluate the progress of sulfide oxidation in the mine-waste area. Water- and acid-soluble sulfate produced from different mine-waste samples, such as metallurgical waste (MW) and waste rock (WR), in laboratory experiments also shows distinct ³⁴S values and allows identification of the acid-mine-drainage sources in the mine-waste area. Average ³⁴S_SO4values are –1.43 for MW (n=4) and +2.06 for WR (n=8). Short (24 hr) and long (60 days) term leach experiments were considered using alternating wet/dry conditions to simulate sulfate-production capacity and metal-discharge characteristics for MW and WR piles. Release of heavy metals follows the order of Pb²⁺ >Mn²⁺ >Zn²⁺ >Cu²⁺ for these pile samples. Values of ³⁴S_SO4 for river water that was collected after 3–4 h of heavy rainfall are close to values of ³⁴S_SO4 for water-soluble sulfates from mine-waste piles used in laboratory leach experiments.This revised version was published in February 2005 with corrections to the placement of the figures.     

Zinc contamination in river water and sediments at Taisyu Zn–Pb mine area,Tsushima Island,Japan

Tsushima Island is one of the oldest zinc-lead mining areas in Japan. River water and sediment samples were collected mainly from Taishu area to determine the contamination level of Zn and to clarify its behaviour in the natural system. Among the water samples analysed, 64% exceeded the standard environmental limit of 0.03 µg ml^− 1 for Zn. In most cases, Zn concentration in sediment samples also exceeded the standard value, and the concentration varied from 86.75–7490.07 µg g^− 1. The mineralogical constituents in sediments were almost similar and quartz had the strongest peak, but the interior part of the ores had many minerals, with galena having the highest proportion. Considering the enrichment factor values (EFc), 12 samples have values of more than 50, indicating a high pollution load for Zn. This study revealed that the sulphide ores, and contaminated sediments, are the possible contamination sources of Shiine River, and Zn dissolution occurred by reactions, such as desorption and ion exchange.     

Phosphate amendment of metalliferous tailings, Cannington Ag–Pb–Zn mine, Australia: implications for the capping of tailings storage facilities

This study appraised the use of phosphate fertilisers in immobilising metals in mine tailings to prevent their uptake into Curly Mitchell grass (Astrebla lappacea), when grown on capped, phosphate-amended tailings. Leaching experiments showed that Pb mobility was reduced by both bone meal and superphosphate amendment. Bone meal amendment also reduced Cd mobility. By contrast, Cd, Mn and Zn mobility increased in superphosphate-amended tailings due to increased acid production and, Cu was mobilised in bone meal-amended tailings possibly through the formation of soluble metal-complexing organic compounds. Arsenic and Sb were mobilised in both treatments due to phosphate ligand exchange. Greenhouse trials used Curly Mitchell grass grown on 1-m-high columns stacked with waste materials and different amendments overlain by clean topsoil. Curly Mitchell grass showed substantial uptake of Cd, Mn, Pb and Zn from unamended tailings and waste rock, where these were penetrated by the plant’s root system. Addition of phosphate fertilisers to the surface of tailings did not result in reduced metal uptake by Curly Mitchell grass. In tailings capped with limestone, the limestone layer formed an effective physical barrier preventing root penetration into the tailings and led to substantially reduced metal uptake in grass. The study demonstrates that thorough mixing of waste materials and fertilisers as well as irrigation may be required for successful phosphate immobilisation of metals in base metal tailings. Alternatively, the placement of a thin layer of crushed limestone on top of the tailings pile prior to capping may lead to the formation of a chemical and physical barrier and prevent the transfer of environmentally significant elements into the above-ground biomass of Mitchell grasses.     

The Hakkari nonsulfide Zn–Pb deposit in the context of other nonsulfide Zn–Pb deposits in the Tethyan Metallogenic Belt of Turkey

The Hakkari nonsulfide zinc deposit is situated close to the southeastern border of Turkey. Here both sulfide and nonsulfide Zn ≫ Pb ores are hosted in carbonate rocks of the Jurassic Cudi Group with features typical of carbonate-hosted supergene nonsulfide zinc mineralization. The regional strike extent of the mineralized district is at least 60 km. The age of the supergene deposit has not been determined, but it is probable that the main weathering happened during Upper Tertiary, possibly between Upper Miocene and Lower Pliocene. The Hakkari mineralization can be compared to other carbonate-hosted Zn–Pb deposits in Turkey, and an interpretation made of its geological setting. The zinc mineral association at Hakkari typically comprises smithsonite and hemimorphite, which apparently replace both sulfide minerals and carbonate host rock. Two generations of smithsonite are present: the first is relatively massive, the second occurs as concretions in cavities as a final filling of remnant porosity. Some zinc is also hosted within Fe–Mn-(hydr)oxides. Lead is present in cerussite, but also as partially oxidized galena. Lead can also occur in Mn-(hydr)oxides (max 30% PbO). The features of the supergene mineralization suggest that the Hakkari deposit belongs both to the “direct replacement” and the “wall-rock replacement” types of nonsulfide ores. Mineralization varies in style from tabular bodies of variable thickness (< 0.5 to 13 m) to cross-cutting breccia zones and disseminated ore minerals in pore spaces and fracture planes. At Hakkari a As–Sb–Tl(≫ Hg) geochemical association has been detected, which may point to primary sulfide mineralization, quite different from typical MVT.     

Heavy metal pollution in mine–soil–plant system in S. Francisco de Assis – Panasqueira mine (Portugal)

The active Panasqueira mine is a tin–tungsten (Sn–W) mineralization hosted by metasediments with quartz veins rich in ferberite. The economic exploitation has been focused on wolframite, cassiterite and chalcopyrite. The mineralization also comprises several sulphides, carbonates and silver sulphosalts. The mining and beneficiation processes produces arsenic-rich mine wastes laid up in huge tailings and open air impoundments that are the main source of pollution in the surrounding area, once the oxidation of sulphides can result in the mobilization and migration of trace metals/metalloids from the mining wastes into the environment, releasing contaminants into the ecosystem.A geochemical survey was undertaken, in order to investigate the environmental contamination impact on agricultural and residential soils in S. Francisco de Assis village due to the mining activities. Rhizosphere samples, vegetables (Solanum tubersum sava and Brassica olerácea L.) which constitute an important part of the local human diet), irrigation waters and road dusts were collected in private residences in S. Francisco de Assis village. According to the Ontario guidelines (Ministry of Environment, 2011), the Arsenic contents in the rhizosphere soils exceed 20 times the reference value for agricultural soils (11 mg kg⁻¹). The result obtained showed that some edible plants frequently used in the region could be enriched in these metals/metalloids and may represent a serious hazard if consumed. The potatoes tend to have a preferential accumulation in the leaves and roots while in cabbages most elements have a preferential accumulation in the roots. An index of the risk for residents, due to ingesting of these metals/metalloids, by consuming vegetables grown around the sampling area, was calculated and the result indicates that the inhabitants of S. Francisco de Assis village are probably exposed to some potential health risks through the intake of arsenic, cadmium and also lead via consuming their vegetables.     

Metal and metalloid leaching from tailings into streamwater and sediments in the old Ag–Pb–Zn Terramonte mine,northern Portugal

Tailings deposited over the Castanheira, a stream which flows through the old Ag–Pb–Zn Terramonte mine area, showed a great potential environmental risk due to sulphide weathering, facilitated by the tailings–water interaction. The high concentrations of Al, Fe, Pb and Zn in the tailings are associated with the exchangeable, reducible and sulphide fractions and suggest sphalerite and pyrite occurrences. Oxidation of pyrite is responsible for the low pH values (3.38–4.89) of the tailings. The water from the Castanheira stream is not suitable for human consumption due to high concentrations of SO₄ ^2?, Mn, Al, Cd, Ni, and Pb. The lowest concentrations of metals and metalloids were detected in downstream stretches of the Castanheira. However, As, Fe and Zn in deeper sediments tend to increase downstream. Significant concentrations of trivalent forms of arsenic were detected in water samples. In downstream stretches of the Castanheira, some free ions (Fe²⁺, Mn²⁺ and Zn²⁺) also predominate and the water is saturated with ferrihydrite, goethite, hematite, lepidocrosite and magnetite.     

Phytoremediation assessment of native plants growing on Pb–Zn mine site in Northern Tunisia

Pollution by heavy metals presents an environmental concern, and their toxicity threats soil, water, animals and human health. Phytoremediation can be used as a solution to remediate contaminated soils. The aim of this study was to identify native plants collected from tailings: material of Pb–Zn mine sites of Fedj Lahdoum and Jebel Ressas (two abandoned mines located, respectively, in the northwest of Tunisia and in the south of Tunis City). The tolerance of plant to heavy metals (lead, zinc and cadmium) is evaluated. Soil samples were collected and analyzed for Pb, Zn and Cd concentration. The total soil Pb, Zn and Cd are, respectively, reached 6132 mg kg^?1, 11,052 mg kg^?1 and it doesn’t exceed 479 mg kg^?1 for Cd. The highest content of Zn in plants was detected in shoots of Rumex bucephalophorus (1048 mg kg^?1), and the highest Pb concentration was detected in roots of Chrysopogon zizanioides (381 mg kg^?1), while for Cd Silene colorata it accumulated the highest content in roots (51 mg kg^?1). From all plants, only 12 have a translocation factor for Pb which is higher than one. Among all plants, only 17 have a translocation factor that is higher than one for Zn, while for Cd only 13 plants indicate TF > 1. As for the biological absorption coefficient, all samples indicate a rate which is lower than one. These plants can be primarily hyper accumulators and useful in remediation of lead- and zinc-contaminated soils after further biochemistry researches in mechanism of accumulation and translocation of heavy metals in plants.     

Mineralization and fluid evolution of the Jiyuan polymetallic Cu–Ag–Pb–Zn–Au deposit,eastern Tianshan,NW China

The newly discovered Jiyuan Cu–Ag–(Pb–Zn–Au) deposit is located in the southern section of the eastern Tianshan orogenic belt, Xinjiang, northwestern China. It is the first documented deposit in the large Aqikekuduke Ag–Cu–Au belt in the eastern Tianshan orogen. Detailed field observations, parageneses, and fluid inclusion studies suggest an epithermal ore genesis for the main Cu–Ag mineralization, accompanied by a complicated hydrothermal alteration history most likely associated with the multi-stage tectonic evolution of the eastern Tianshan. The Jiyuan Cu–Ag ore bodies are located along the EW-striking, south-dipping Aqikekuduke fault and are hosted by Precambrian marble and intercalated siliceous rocks. Early-stage skarn alteration occurred along the contact zone between the marble layers and Early Carboniferous diorite–granodiorite and monzogranite intrusions; the skarns are characterized by diopside–tremolite–andradite–pyrite–(magnetite) assemblages. Local REE-enriched synchysite–rutile–arsenopyrite–(clinochlorite–microcline–albite) assemblages are related to K–Na alteration associated with the monzogranite intrusions and formed under conditions of high temperature (310°C) and high salinity (19.9 wt.% NaCl). Subsequent hydrothermal alteration produced a series of quartz and calcite veins that precipitated from medium- to low-temperature saline fluids. These include early ‘smoky’ quartz veins (190°C; 3.0 wt.% NaCl) that are commonly barren, coarse-grained Cu–Ag mineralized quartz veins (210°C; 2.4 wt.% NaCl), and late-stage unmineralized calcite veins (140°C; 1.1 wt.% NaCl). Tremolite and Ca-rich scapolite veins formed at an interval between early and mineralized quartz veins, indicating a high-temperature, high-salinity (>500°C; 9.5 wt.% NaCl) Ca alteration stage. Fluid mixing may have played an important role during Cu–Ag mineralization and an external low-temperature Ca-rich fluid is inferred to have evolved in the ore-forming system. The Jiyuan auriferous quartz veins possess fluid characteristics distinct from those of the Cu–Ag mineralized quartz veins. CO₂-rich fluid inclusions, fluid boiling, and mixing all demonstrate that these auriferous quartz veins acted as hosts for the orogenic-type gold mineralization, a common feature in the Tianshan orogenic belt.     

Two pulses of mineralization and genesis of the Zhaxikang Sb–Pb–Zn–Ag deposit in southern Tibet: Constraints from Fe–Zn isotopes

Zhaxikang is one large Sb–Pb–Zn–Ag deposit located in the North Himalaya of southern Tibet. To date, the genesis of this deposit still remains controversial. Here, we present new pyrite Fe and sphalerite Zn isotopic data for the first three stages of mineralization, Fe–Zn isotopic data for Mn–Fe carbonate that formed during the first two stages of mineralization, and Zn isotopic data for the slate wall rocks of the Jurassic Ridang Formation to discuss the genesis of the Zhaxikang deposit. The overall δ⁵⁶Fe and δ⁶⁶Zn values range from −0.80‰ to 0.43‰ and from −0.03‰ to 0.38‰, respectively. The δ⁵⁶Fe values of Mn–Fe carbonates are lighter than those of associated pyrite in six mineral pairs, indicating that the iron carbonates are preferentially enriched in light Fe isotopes relative to pyrite. The sphalerite has lighter δ⁶⁶Zn values than associated Mn–Fe carbonates in three mineral pairs.The δ⁵⁶Fe values of pyrite that formed during the first three stages of mineralization gradually increase from stage 1 (−0.33‰ to −0.09‰) through stage 2 (−0.30‰ to 0.19‰) to stage 3 (0.16‰–0.43‰). In comparison, the sphalerite that formed during these stages has δ⁶⁶Zn values that gradually decrease from stage 1 (0.16‰–0.35‰) through stage 2 (0.09‰–0.23‰) to stage 3 (−0.03‰ to 0.22‰). These data, in conjunction with the observations of hand specimens and thin sections, suggest that the deposit was overprinted by a second pulse of mineralization. This overprint would account for these Fe–Zn isotopic variations as well as the kinetic Rayleigh fractionation that occurred during mineralization. The temporally increasing δ⁵⁶Fe and decreasing δ⁶⁶Zn values recorded in the deposit are also coincident with an increase in alteration, again supporting the existence of two pulses of mineralization. The δ⁵⁶Fe values of the first pulse of ore-forming fluid were calculated using theoretical equations, yielding values of −0.54‰ to −0.34‰ that overlap with those of submarine hydrothermal solutions (−1‰ to 0‰). However, the δ⁵⁶Fe values of the stage 3 pyrite are heavier than those of typical submarine hydrothermal solutions, which suggests that the second pulse of mineralization was probably derived from a magmatic hydrothermal fluid. In addition, the second pulse of ore-forming fluid has brought some Fe and taken away parts of Zn, which results the lighter δ⁶⁶Zn values of sphalerite and heavier δ⁵⁶Fe values of pyrite from the second pulse of mineralization. Overall, the Zhaxikang deposit records two pulses of mineralization, and the overprint by the second pulse of mineralization causes the lighter δ⁶⁶Zn values and heavier δ⁵⁶Fe values of modified samples.     

Metallogeny of the northeastern Gangdese Pb–Zn–Ag–Fe–Mo–W polymetallic belt in the Lhasa terrane,southern Tibet

The northeastern Gangdese Pb–Zn–Ag–Fe–Mo–W polymetallic belt (NGPB), characterized by skarn and porphyry deposits, is one of the most important metallogenic belts in the Himalaya–Tibetan continental orogenic system. This belt extends for nearly four hundred kilometers along the Luobadui–Milashan Fault in the central Lhasa subterrane, and contains more than 10 large ore deposits with high potential for development. Three major types of mineralization system have been identified: skarn Fe systems, skarn/breccia Pb–Zn–Ag systems, and porphyry/skarn Mo–Cu–W systems. In this study, we conducted a whole-rock geochemical, U–Pb zircon geochronological, and in situ zircon Hf isotopic study of ore-forming rocks in the NGPB, specifically the Jiangga, Jiaduopule, and Rema skarn Fe deposits, and the Yaguila Pb–Zn–Ag deposit. Although some of these deposits (porphyry Mo systems) formed during the post-collisional stage (21–14 Ma), the majority (these three systems) developed during the main (‘soft collision’) stage of the India–Asia continental collision (65–50 Ma). The skarn Fe deposits are commonly associated with granodiorites, monzogranites, and granites, and formed between 65 and 50 Ma. The ore-forming intrusions of the Pb–Zn–Ag deposits are characterized by granite, quartz porphyry, and granite porphyry, which developed in the interval of 65–55 Ma. The ore-forming porphyries in the Sharang Mo deposit, formed at 53 Ma. The rocks from Fe deposits are metaluminous, and have relatively lower SiO₂, and higher CaO, MgO, FeO contents than the intrusions associated with Mo and Pb–Zn–Ag mineralization, while the Pb–Zn–Ag deposits are peraluminous, and have high SiO₂ and high total alkali concentrations. They all exhibit moderately fractionated REE patterns characterized by lower contents of heavy REE relative to light REE, and they are enriched in large-ion lithophile elements and relatively depleted in high-field-strength elements. Ore-forming granites from Fe deposits display ⁸⁷Sr/⁸⁶Sr_(i) = 0.7054–0.7074 and ε_Nd(t) = − 4.7 to + 1.3, whereas rocks from the Yaguila Pb–Zn–Ag deposit have ⁸⁷Sr/⁸⁶Sr_(i) = 0.7266–0.7281 and ε_Nd(t) = − 13.5 to − 13.3. In situ Lu–Hf isotopic analyses of zircons from Fe deposits show that ε_Hf(t) values range from − 7.3 to + 6.6, with T_DM(Hf)^C model ages of 712 to 1589 Ma, and Yaguila Pb–Zn–Ag deposit has ε_Hf(t) values from − 13.9 to − 1.3 with T_DM(Hf)^C model ages of 1216 to 2016 Ma. Combined with existing data from the Sharang Mo deposit, we conclude that the ore-forming intrusions associated with the skarn Fe and porphyry Mo deposits were derived from partial melting of metasomatized lithospheric mantle and rejuvenated lower crust beneath the central Lhasa subterrane, respectively. Melting of the ancient continental material was critical for the development of the Pb–Zn–Ag system. Therefore, it is likely that the source rocks play an important role in determining the metal endowment of intrusions formed during the initial stage of the India–Asia continental collision.     

Metallogeny of the Nicholas-Denys Pb–Zn–Ag deposit,Bathurst Mining Camp,Canada

The Nicholas-Denys Pb–Zn–Ag deposit, located in the Bathurst Mining Camp (New Brunswick), consists of several pyrrhotite–sphalerite–galena sulfide lenses hosted by black mudstone of the Millstream Formation of the Fournier Group, deposited in an Ordovician backarc basin. The Nicholas-Denys sulfide lenses and hydrothermal alteration are conformable to the bedding-parallel S₁ regional foliation, and are sheared parallel to the Rocky Brook-Millstream shear zone, indicating a pre-Devonian deformation timing for mineralization. Reduced sulfur for Nicholas-Denys sulfides comes from bacterial reduction of Ordovician seawater sulfates in a system open to sulfates under partially oxygenated bottomwater conditions, with addition of magmatic sulfur from underlying mafic volcanic rocks. Lead was leached from the backarc basin sediments of the Millstream Formation mudstone and from underlying synvolcanic gabbros. The mineralizing fluid for Nicholas-Denys sulfides was reduced and acidic, favorable for precipitation of a pyrrhotite-rich mineralization. Characteristics of the Nicholas-Denys deposit are compatible with a SEDEX-type classification.     

Nature and practical implications of heterogeneities in the geochemistry of zinc-rich,alkaline mine waters in an underground F–Pb mine in the UK

Water pollution arising from base metal sulphide mines is problematic in many countries, yet the hydrogeology of the subsurface contaminant sources is rarely well-characterized. Drainage water pumped from an active F–Pb mine in northern England has unusual chemistry (alkaline with up to 40 mg.l⁻¹ Zn) which profoundly impacts the ecology of the receiving watercourse. Detailed in-mine surveys of the quantity and quality of all ground water inflows to the mine were made. These revealed major, temporally persistent heterogeneities in ground water quality, with three broad types of water identified as being associated with distinct hydrostratigraphic units. Type I waters (associated with the Firestone Sill aquifer) are cool (<10°C), Ca–HCO₃–SO₄ waters, moderately mineralized (specific electrical conductance (SEC)≤410 μS.cm⁻¹) with <4 mg.l⁻¹ Zn. Type II waters (associated with the Great Limestone aquifer) are warmer (≈15°C), of Ca–SO₄ facies, highly mineralized (SEC≤1500 μS.cm⁻¹) with ≤40 mg.l⁻¹ Zn. Type III waters (in the deepest workings) are tepid (>18°C), of Ca–HCO₃–SO₄ facies, intermediately mineralized (SEC≤900 μS.cm⁻¹) with ≤13 mg.l⁻¹ Zn, and with significant Fe (≤12 mg.l⁻¹) and Pb (≤8 mg/l). Monotonic increases in temperature and Cl⁻ concentration with depth contrast with peaks in total mineralization, SO₄ and Zn at medium depth (in Type II waters). Sulphate, Pb and Zn are apparently sourced via oxidation of galena and sphalerite, which would release each metal in stoichiometric equality with SO₄. However, molal SO₄ concentrations typically exceed those of Pb and Zn by 2–3 orders of magnitude, which mineral equilibria suggest is due to precipitation of carbonate “sinks” for these metals. Contaminant loading budgets demonstrate that, although Type II waters amount to only 25% of the total ground water inflow to the mine, they account for almost 60% of the total Zn loading. This observation has important management implications for both the operational and post-abandonment phases of the mine life cycle.     

Geological and isotopic evidence for magmatic-hydrothermal origin of the Ag–Pb–Zn deposits in the Lengshuikeng District,east-central China

The Lengshuikeng ore district in east-central China has an ore reserve of ～43 Mt with an average grade of 204.53 g/t Ag and 4.63 % Pb?+?Zn. Based on contrasting geological characteristics, the mineralization in the Lengshuikeng ore district can be divided into porphyry-hosted and stratabound types. The porphyry-hosted mineralization is distributed in and around the Lengshuikeng granite porphyry and shows a distinct alteration zoning including minor chloritization and sericitization in the proximal zone; sericitization, silicification, and carbonatization in the peripheral zone; and sericitization and carbonatization in the distal zone. The stratabound mineralization occurs in volcano-sedimentary rocks at ～100–400 m depth without obvious zoning of alterations and ore minerals. Porphyry-hosted and stratabound mineralization are both characterized by early-stage pyrite–chalcopyrite–sphalerite, middle-stage acanthite–native silver–galena–sphalerite, and late-stage pyrite–quartz–calcite. The δ³⁴S values of pyrite, sphalerite, and galena in the ores range from ?3.8 to +6.9‰ with an average of +2.0‰. The C–O isotope values of siderite, calcite, and dolomite range from ?7.2 to ?1.5‰ with an average of ?4.4‰ (V-PDB) and from +10.9 to +19.5‰ with an average of +14.8‰ (V-SMOW), respectively. Hydrogen, oxygen, and carbon isotopes indicate that the hydrothermal fluids were derived mainly from meteoric water, with addition of minor amounts of magmatic water. Geochronology employing LA–ICP–MS analyses of zircons from a quartz syenite porphyry yielded a weighted mean ²⁰⁶Pb/²³⁸U age of 136.3?±?0.8 Ma considered as the emplacement age of the porphyry. Rb–Sr dating of sphalerite from the main ore stage yielded an age of 126.9?±?7.1 Ma, marking the time of mineralization. The Lengshuikeng mineralization classifies as an epithermal Ag–Pb–Zn deposit.