单分散磁性P(St/BA/MAA)微球的制备

在共沉淀法合成超细磁流体的基础上 ,以苯乙烯 (St)、丙烯酸丁酯 (BA)和甲基丙烯酸 (MAA)为共聚单体 ,在不同的介质体系中采用无皂乳液聚合法制备了单分散 ,粒径范围为 80～ 2 30nm的磁性P(St BA MAA)微球 .详细探讨了介质极性、磁流体中表面活性剂含量对磁性高分子微球粒径和单分散性的影响 .实验结果表明 ,在一定范围内随介质极性降低 ,磁性高分子微球的单分散性提高 ,随表面活性剂用量增加 ,单分散性变差 .总体来看 ,磁性高分子微球的单分散性与其表面静电斥力密切相关 ,过大或过小的静电斥力均会导致磁性高分子微球单分散性的降低 .     

大分子单体聚N-乙烯甲酰胺与苯乙烯共聚合成热敏性功能高分子微球

用自由基聚合法合成了大分子单体聚N 乙烯甲酰胺和功能高分子微球 .用GPC、分光光度仪和扫描电子显微镜等对合成的聚合物进行了表征 .研究结果表明 ,大分子单体聚N 乙烯甲酰胺和功能高分子微球具有明显的热敏性特性 ,且合成的功能高分子微球具有单分散性 ,粒径在 1～ 5 μm之间     

吴氏作图法的实验证明

"吴氏作图法"为高分子微球的大小和单体与稳定剂之比之间的关系提供了有效的定量数据分析方法.其基本点是,对于表面活性剂、离子基团或聚合物链所稳定的高分子微球,每个稳定剂所占有的高分子微球表面积(S)为一常数.过去的大量实验已证明,"吴氏作图法"适合应用于高分子纳米粒子.本文根据最近的实验结果,发现"吴氏作图法"同样适用于微米级高分子微球.这为分散聚合中设计和控制高分子微球的尺寸提供了理论依据.     

超顺磁性高分子微球的制备与表征

用化学共沉淀方法制备了Fe3O4纳米微粒,并用油酸(十八烯酸)和十二烷基苯磺酸钠为双层表面活性剂进行表面修饰,制备了稳定的水分散性纳米Fe3O4可聚合磁流体.在Fe3O4磁流体存在下,将苯乙烯与甲基丙烯酸通过乳液聚合方法制备了磁性高分子微球.透射电镜研究表明,Fe3O4微粒的平均粒径在10nm左右,乳液聚合形成的磁性高分子微球的粒径平均约为130nm;用超导量子干涉仪对微粒及高分子微球进行了磁性表征,结果表明,合成的Fe3O4纳米微粒以及磁性高分子微球均具有超顺磁性.同时,还用红外光谱及X射线衍射表征了磁性高分子微球的化学成分和晶体结构.用热失重方法测得磁性高分子微球中磁性物质的含量为23.6%.     

特殊形态接枝高分子颗粒的合成

表面接枝高分子微球具有分子结构的可设计性 ,分散稳定性好 ,被用于高效催化剂的载体、药物释放控制和疾病治疗等生物医学领域 ,因而引起了许多高分子材料和生物医学工作者的极大兴趣[1～ 3] .我们用链转移自由基聚合法合成了一端为苯乙烯基封端的聚乙二醇 ( PEG)和聚 ( N -异丙基丙烯酰胺 )等亲水性大分子单体 .在与疏水性单体如苯乙烯等的二元分散共聚反应中 ,利用接枝共聚物在溶液中的自组装 ,制备了粒径分布均一 ,颗粒表面形态光滑 ,同时表面具有功能性高分子链的微球 [4～ 8] .传统的合成高分子微球的研究主要是以苯乙烯或甲基丙烯酸…     

两亲高分子微球的合成与表征

通过苯乙烯和聚氧乙烯大分子单体的共聚,合成了粒径在0.5μm～1.5μm的两亲高分子微球.随着聚氧乙烯大分子单体浓度的增加,微球粒径减小.通过扫描电镜,IR等分析手段对微球进行了表征.     

N-乙基壳聚糖的针状结晶

在N 乙基壳聚糖的甲酸溶液浇铸膜中观察到高分子少有的针状晶体 .从球晶经后结晶得到的针状晶体为长条矩形 ,典型尺寸为～ 5 0 μm× 2～ 5 μm× 1～ 2 μm ,高分子链平行于晶体长轴 .针状晶体首先出现在球晶的核心处 ,继而出现在球晶微纤每个树枝状分叉处 ,最后才遍布球晶各处 .针状晶体可以看成是高分子伸直链结晶的一种 .浇铸膜吸潮实际上形成了超浓溶液 (浓度 >80wt% ) ,从而分子链可以运动而后结晶成针状晶体     

含钆温度敏感高分子核磁共振成像(MRI)造影剂的制备及研究

合成了一种新型可聚合型含钆单体,在温敏单体N-异丙基丙烯酰胺存在下,采用无皂乳液聚合法一步制备了含钆温度敏感的高分子微球.透射电子显微镜测试表明微球呈单分散性;动态光散射测试表明高分子微球的平均水合粒径约260 nm,呈现很窄的粒径分布;当温度从25℃升到45℃时,其粒径减小约60 nm,表明含钆高分子微球具有较好的温度敏感性.体外MRI测试表明,所得高分子微球的体外弛豫率为8.01(mmol/L)-1S-1(3 T),能有效的增强MRI信号,具有优良的MRI造影功能.上述结果表明,所得微球作为一种多功能MRI造影剂,在生物医学领域极具应用前景.     

PNVA-g-PSt微球的功能化与离子吸附研究

由大分子单体法合成了表面聚N-乙烯基乙酰胺接枝聚苯乙烯(PNVA-g-PSt)微球,通过对该接枝链进行化学改性得到了新型功能化高分子微球.用透射电子显微镜、激光光散射和X射线光电子能谱对高分子微球的形态、表面组成和直径大小进行了表征,发现微球经水解后形态更加规整,在分散状态下直径有所增加且保持核-壳型结构.实验比较了几种高分子微球对Cu2 ,Pb2 离子的吸附效果.定量测定结果表明:高分子微球经功能化处理后,其吸附效果有了很大的改进,在较低浓度范围,Pb2 离子的脱除率可达100%.     

模板法组装微米级微球

运用毛细微模塑(MIMIC)技术, 排列得到了线状和折叠状微球串, 并对MIMIC驱动微球自组装的机理进行了初步研究; 借助微液滴做模板, 排列得到含有不同数目的微球环或准环. 加热到微球的软化温度以上, 使紧密挨着的微球相互粘接, 然后溶解掉底膜, 获得了自由的刚性微球串. 期望改变微球的联结方式, 以获得自由的柔性微球串, 如果把单个微球看作高分子的“链节单元”, 微球串就近似地看作高分子链的简单直接“模型”, 有望用来模拟高分子凝聚态基本物理问题.     

Characterization of Fe3O4/P(St-MPEO) Amphiphilic Magnetic Polymer Microspheres

IntroductionMagnetic microspheres have been widely usedin many fields,such as targetdrug,cell separationand enzyme immunoassay,since the past twentyyears because of their relatively rapid and easymagnetic separation[1] .Although a poly(ethyleneoxide) supported- catalyst system with a solublepolymer as the carrier can easily keep the activityand the selectivity of the catalyst,its recovery hasto be performed by filtration or precipitation fromthe reaction medium,which is time- consuming andener…     

两亲磁性高分子微球的合成与表征

在Fe3O4磁流体存在下 ,通过苯乙烯与聚氧乙烯大分子单体 (MPEO)分散共聚制备两亲磁性高分子微球 .研究了聚氧乙烯大分子单体对微球粒径的影响 .用扫描电子显微镜 (SEM)、原子力显微镜 (AFM)表征了磁性微球的粒径、表面形貌以及表面粗糙度 ,用傅立叶红外光谱 (FTIR)鉴定了共聚物的结构 .随着聚合物中聚氧乙烯大分子单体含量的增加 ,微球表面的粗糙度增加 ,通过改变共聚物中MPEO的含量 ,可以得到含有 0 4～ 3 5mg g羟值的两亲磁性高分子微球     

Block and star block copolymers by mechanism transformation X. Synthesis of poly(ethylene oxide) methyl ether/polystyrene/poly(l-lactide) ABC miktoarm star copolymers by combination of RAFT and ROP

Poly(ethylene oxide) methyl ether/polystyrene/poly(l-lactide) (MPEO/PSt/PLLA) ABC miktoarm star copolymers were synthesized by combination of reversible addition-fragmentation transfer (RAFT) polymerization and ring-opening polymerization (ROP) using bifunctional macro-transfer agent, MPEO with two terminal dithiobenzoate and hydroxyl groups. It was prepared by reaction of MPEO with maleic anhydride (MAh), subsequently reacted with dithiobenzoic acid and ethylene oxide. RAFT polymerization of St at 110 °C yielded block copolymer, MPEO-b-PSt [(MPEO)(PSt)CH₂OH], and then it was used to initiate the polymerization of l-lactide in the presence of Sn(OCt)₂ at 115 °C to produce ABC miktoarm star polymers, s-[(MPEO)(PSt)(PLLA)]. The structures of products obtained at each synthetic step were confirmed by NMR and gel permeation chromatography data.     

分散聚合制备聚苯乙烯/聚氧乙烯两亲聚合物微球

聚乙二醇在NaH的作用下和对氯甲基苯乙烯反应制得聚氧乙烯大分子单体 ,然后在乙醇 /水的介质中通过聚氧乙烯大分子单体和苯乙烯的分散共聚制得粒径范围在 0 5～ 1 5 μm ,粒径分布接近单分散的两亲聚合物微球 .对影响微球粒径和粒径分布的各个因素进行了研究 .     

Synthesis of well-defined ABC triblock copolymers with polypeptide segments by ATRP and click reactions

Well-defined ABC block copolymers consisting of poly(ethylene oxide) monomethylene ether (MPEO) as A block, poly(styrene) (PS) as B block and poly(γ-benzyl-l-glutamate) (PBLG) as C block were synthesized by the combination of atom transfer radical polymerization (ATRP) and click reactions. The bromine-terminated diblock copolymer poly(ethylene oxide) monomethylene ether-block-poly(styrene) (MPEO-PS-Br) was prepared by ATRP of styrene initiated with macro-initiator MPEO-Br, which was prepared from the esterification of MPEO and 2-bromoisobutyryl bromide, and converted into the azido-terminated diblock copolymer MPEO-PS-N₃ by simple nucleophilic substitutions in DMF in the presence of sodium azide. Propargyl-terminated PBLGs were synthesized by ring-opening polymerization of γ-benzyl-l-glutamate-N-carboxyanhydride in DMF at room temperature using propargyl amine as an initiator. ABC triblock copolymers MPEO-PS-PBLG with a wide range of number-average molecular weights from 1.55 to 3.75 × 10⁴ and a narrow polydispersity from 1.07 to 1.10 were synthesized via the click reaction of MPEO-PS-N₃ and the propargyl-terminated PBLG in the presence of CuBr and 1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) catalyst system. The structures of these ABC block copolymers and corresponding precursors were characterized by NMR, IR and GPC. The results showed that click reaction was efficient. Therefore, a facile approach was offered to synthesize ABC triblock copolymers composed of crystallizable polymer MPEO, conventional vinylic polymer PS and rod-like α-helix polypeptide PBLG.     

表面接枝亲水性聚合物刷磁性微球的制备及其对蜂蜜中四环素类抗生素残留的磁分散固相萃取

采用电子转移活化再生催化剂原子转移自由基聚合法（ARGET-ATRP）在磁性微球（MMs）表面连续接枝了聚碱类聚合物和聚乙二醇刷。首先将MMs包覆硅胶,接枝氨基,然后在其表面接枝溴引发剂,最后在MMs表面进行聚合,制备了亲水性聚合物刷磁性微球（HMMs）。通过透射电镜、傅里叶变换红外光谱对HMMs进行表征,并研究了HMMs对蛋白质的吸附性能。结果表明,合成的HMMs粒径较为均一,分散性良好并且具有良好的抗蛋白质吸附性能。利用制备的HMMs,采用磁分散固相萃取（MDSPE）-高效液相色谱法（HPLC）测定了蜂蜜中四环素类抗生素（TCs）残留。TCs的平均回收率为85.8%~94.5%,方法的检出限和定量限分别为1.92~2.56 μg/kg和6.40~8.53 μg/kg。该方法成功地用于蜂蜜中TCs残留的快速分离富集。     

Synthesis and chiral micellization behavior of optically active amphiphilic diblock copolymer bearing quinine pendants

A novel optically active amphiphilic diblock copolymer bearing quinine pendants poly(ethylene oxide)‐b‐poly(glycidyl triazolyl‐L ‐quinine) (MPEO‐b‐PGTQ) was synthesized by “click” reaction of alkyne‐modified diblock copolymer poly(ethylene oxide)‐b‐poly(glycidyl propargyl ether) (MPEO‐b‐PGPE) and 9‐N₃‐quinine. The structure and composition of copolymers were characterized by gel permeation chromatography, ¹H nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis and optical rotation measurements, which showed that the synthetic route could provide the copolymer with well‐defined composition and with similar optical activity compared to its parent quinine. The micellization behavior of this chiral copolymer was investigated in different solvent systems. The results from fluorescence spectroscopy, UV spectroscopy, dynamic light scattering, transmission electron microscopy, ¹H NMR and circular dichroism (CD) spectroscopy indicated that the MPEO‐b‐PGTQ could form regular chiral spherical micelles in H₂O and Tetrahydrofuran‐H₂O (10:90, V/V) systems, and the state of aggregated chiral micelles depended on the nature of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3640–3650, 2009     

Magnetic hydrophilic methacrylate-based polymer microspheres for genomic DNA isolation

Carboxyl groups containing magnetic and non-magnetic microspheres were used in solid-phase reversible immobilization (SPRI) of genomic DNA. Magnetic non-porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate)--P(HEMA-co-EDMA), poly(glycidyl methacrylate)--PGMA and P(HEMA-co-GMA) microspheres with hydrophilic properties were prepared by dispersion copolymerization of the respective monomers in the presence of colloidal iron oxides. DNA from chicken erythrocytes and DNA isolated from bacterial cells of Bifidobacterium longum was used for testing of adsorption/desorption properties of magnetic microspheres. The occurrence of false negative results in polymerase chain reaction (PCR) caused by the presence of extracellular inhibitors in DNA samples has been solved using SPRI. The P(HEMA-co-EDMA) and P(HEMA-co-GMA) microspheres were used for isolation of DNA from different dairy products followed by PCR identification of Bifidobacterium strains.     

含氨基和环氧基双功能基的聚合物刷磁性微球的制备及对青霉素G酰化酶的固定化

在内部分散超顺磁性Fe3O4纳米粒子的二乙烯苯交联聚丙烯酸微球表面引入原子转移自由基聚合(ATRP)引发剂,引发聚合向微球表面分别引入P(GMMA-r-DMAEMA-r-GMA)、P(GMMA-r-DMAEMA)和P(GMMA-r-GMA)无规共聚物刷(GMMA为甲基丙烯酸甘油单酯,DMAEMA为甲基丙烯酸-N,N-二甲氨基乙酯,GMA为甲基丙烯酸缩水甘油酯),聚合物刷中GMMA链节的作用是使聚合物刷具有亲水性,DMAEMA引入氨基,GMA引入环氧基.研究了青霉素G酰化酶在这些载体上的固定化和其酶活性.结果表明,同时引入环氧基和氨基的P(GMMA-r-DMAEMA-r-GMA)刷磁性微球固定化青霉素G酰化酶的活性和活性收率都最高,其固定化动力学比只含环氧基P(GMMA-r-GMA)刷磁性微球的好.固定化酶比自由酶更耐热,固定化酶的最佳pH值比自由酶的略高,固定化酶重复使用10次后其活性保留70%.