Insights into the Retention Mechanisms on Perfluorohexylpropylsiloxane-Bonded (Fluophase-RP) and Octadecylsiloxane-Bonded (Betasil C18) Stationary Phases Based on the Same Silica Substrate in RP-LC

The solvation parameter model is used to elucidate the retention mechanism on a perfluorohexylpropylsiloxane-bonded (Fluophase RP) and octadecylsiloxane-bonded (Betasil C18) stationary phases based on the same silica substrate with acetonitrile–water and methanol–water mobile phase compositions. Dewetting affects the retention properties of Fluophase RP at mobile phase compositions containing less than 20% (v/v) acetonitrile or 40% (v/v) methanol. It results in a loss of retention due to an unfavorable change in the phase ratio as well as changes in specific intermolecular interactions. Steric repulsion reduces retention of bulky solutes on fully solvated Betasil C18 with methanol–water (but not acetonitrile–water) mobile phase compositions but is not important for Fluophase RP. The retention of weak bases is affected by ion-exchange interactions on Fluophase RP with acetonitrile–water, and to a lesser extent, methanol-water mobile phases but these are weak at best for Betasil C18. The system constants of the solvation parameter model and retention factor scatter plots are used to compare selectivity differences for Fluophase RP, Betasil C18 and a perfluorophenylpropylsiloxane-bonded silica stationary phase Discovery HS F5 for conditions where incomplete solvation, steric repulsion and ion-exchange do not significantly contribute to the retention mechanism. Lower retention on Fluophase RP results from weaker dispersion and/or higher cohesion moderated to different extents by polar interactions since solvated Fluophase RP is a stronger hydrogen-bond acid and more dipolar/polarizable than Betasil C18. Retention factors for acetonitrile–water mobile phases are highly correlated for Fluophase RP and Betasil C18 except for compounds with a large excess molar refraction and weak hydrogen-bonding capability. Selectivity differences are more significant for methanol–water mobile phases. Retention factors on Fluophase RP are strongly correlated with those on Discovery HSF5 for acetonitrile–water mobile phases while methanol–water mobile phases retention on Fluophase RP is a poor predictor of the retention order on Discovery HS F5.     

Insights into the Retention Mechanism of Small Neutral Compounds on Octylsiloxane-Bonded and Diisobutyloctadecylsiloxane-Bonded Silica Stationary Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an octylsiloxane-bonded (Kinetex C8) and diisobutyloctadecylsiloxane-bonded (Kinetex XB-C18) superficially porous silica stationary phases for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not for methanol–water mobile phases. Compared with an octadecylsiloxane-bonded silica stationary phase (Kinetex C18) retention is reduced due to a less favorable phase ratio for both the octylsiloxane-bonded and diisobutyloctadecylsiloxane-bonded silica stationary phases while selectivity differences are small and solvent dependent. Selectivity differences for neutral compounds are larger for methanol–water but significantly suppressed for acetonitrile–water mobile phases. The selectivity differences arise from small changes in all system constants with solute size and hydrogen-bond basicity being the most important due to their dominant contribution to the retention mechanism. Exchanging the octadecylsiloxane-bonded silica column for either the octylsiloxane-bonded or diisobutyloctadecylsiloxane-bonded silica column affords little scope for extending the selectivity space and is restricted to fine tuning of separations, and in some cases, to obtain faster separations due to a more favorable phase ratio. For weak bases larger differences in relative retention are expected with acetonitrile–water mobile phases on account of the additional cation exchange interactions possible that are absent for the octadecylsiloxane-bonded silica stationary phase.     

Characterization of stationary phases in subcritical fluid chromatography by the solvation parameter model. I. Alkylsiloxane-bonded stationary phases

Varied types of alkylsiloxane-bonded and fluoroalkylsiloxane-bonded stationary phases, all commercially available, were investigated with subcritical fluid mobile phase. The effect of the alkyl chain length (from C4 to C18) and of the nature of the bonding (fluorodecylsiloxane, phenyl-C18 and polar-embedded-C18) on the chromatographic behaviour was investigated by the use of a linear solvation energy relationship (LSER), the solvation parameter model. A large set of test compounds provides precise and reliable information on the intermolecular interactions responsible for retention on these stationary phases used with a subcritical mobile phase. First of all, the results underline the close properties between subcritical fluid and organic liquid. The use of non aqueous mobile phases reduces the cavity energy and the mobile phase acidity generally encountered with aqueous liquid phases, allowing other interactions to take a part in retention. As expected, an increase in the alkyl chain length favours the dispersive interactions between the solutes and the stationary phases. Changes in basicity and acidity of the stationary phases are also related to the chain length, but, in this case, mobile phase adsorption onto the stationary phase is supposed to explain these behaviours. The addition of a phenyl group at the bottom of the C18 chain, near the silica, does not induce great modifications in the retentive properties. The fluorodecylsiloxane and the polar-embedded alkylsiloxane phases display very different properties, and can be complementary to the classical alkylsiloxane-bonded phases. In particular, the fluorinated phase does not favour the dispersive interactions, in comparison to hydrogenated stationary phases, when the basicity of the polar-embedded phase is obviously greater than the one of classical alkylsiloxane-bonded phases, due to the amide function. Finally, logk-logk curves plotted between the different phases illustrate the effect of the interaction properties on the retention of different classes of compounds.     

HPLC retention behaviors of poly-aromatic-hydrocarbones on Cu(II)-octabromotetrakis(4-carboxyphenyl)porphine derivatives-immobilized aminopropyl silica gels in polar and non-polar eluents

As one of approaches of developing novel HPLC stationary phases, we prepared Cu-octabromotetrakis(4-carboxyphenyl)porphine derivative-immobilized silica gels (Cu-OBTCPP(D)), and evaluated the availability of the resultant Cu-OBTCPP(D) as a stationary phase for separation of poly-aromatic-hydrocarbons (PAHs) and their related compounds. A Cu-OBTCPP(D) column was revealed to have an ability to separate simple PAHs and be useful as a stationary phase in both polar and non-polar eluents. The retention property of the Cu-OBTCPP(D) column was evaluated in various comparative experiments using commercially available columns. In comparison with 2-(1-pyrenyl)ethyl dimetylsilyl silica gel column (PYE column) regarding the retention behavior for PAHs etc., the Cu-OBTCPP(D) column showed stronger interactions involving pi electron in non-polar eluent than PYE column. In comparison with a pentabromobenzyloxy propylsilyl silica gel column (PBB column) regarding the influence of bromination, the Cu-OBTCPP(D) column was affected differently from the PBB column. In comparison with nitrophenylethyl silica gel column (NPE column) regarding the retention behavior for compounds having a dipole in a non-polar eluent, the Cu-OBTCPP(D) column showed electrostatic interactions such as dipole-dipole interaction equivalent to or larger than the NPE column.     

Retention properties of novel β-CD bonded stationary phases in reversed-phase HPLC mode

With the given special structures, the CD bonded stationary phases are expected to have complementary retention properties with conventional C18 stationary phase, which will be helpful to enhance the polar selectivity in RP mode separation. In this work, two β-cyclodextrin (β-CD) bonded stationary phases for reversed-phase HPLC, including 1, 12-dodecyldiol linked β-CD stationary phase (CD1) and olio (ethylene glycol) (OEG) linked β-CD stationary phase (CD2), have been synthesized via click chemistry. The resulting materials were characterized with FT-IR and elemental analysis, which proved the successful immobilization of ligands. The similarities and differences in retention characteristics between the CD and C18 stationary phases have been elucidated by using comparative linear solvation energy relationships (LSERs). The force related to solute McGowan volume has no significant difference, while the hydrogen bonding and dipolar interactions between solutes and CD stationary phases are stronger than between solutes and C18, which is attributed to the special structures (CD and triazole groups) of CD stationary phases. Chemical origins are interpreted by comparison between CD1 and CD2. Similar dispersive interactions of CD1 and CD2 are attributed to their similar length of spacer arms. CD2 which contains OEG spacer arm has relative weaker HBD acidity but stronger HBA basicity. CD stationary phases display no serious different methylene selectivity and higher polar selectivity than in the case of C18. Higher acid selectivity and lower basic selectivity are observed on CD2 than on CD1. Distinctive retention properties and good complementary separation selectivity to C18 make the novel CD bonded stationary phases available for more application in RPLC.     

Insights into the Retention Mechanism for Small Neutral Compounds on Silica-Based Phenyl Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on phenylhexylsiloxane- and pentafluorophenylpropylsiloxane-bonded superficially porous silica stationary phases (Kinetex Phenyl-Hexyl and Kinetex F5) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation exchange) are important for the retention of weak bases for acetonitrile–water mobile phases, but virtually absent for the same compounds for methanol–water mobile phases. The selectivity of the Kinetex Phenyl-Hexyl stationary phase for small neutral compounds is similar to an octadecylsiloxane-bonded silica stationary phase with similar morphology Kinetex C-18 for both methanol–water and acetonitrile–water mobile phase compositions. The Kinetex Phenyl-Hexyl and XBridge Phenyl stationary phases with the same topology but different morphology are selectivity equivalent, confirming that solvation of the interphase region can be effective at dampening selectivity differences for modern stationary phases. Small selectivity differences observed for XTerra Phenyl (different morphology and topology) confirm previous reports that the length and type of space arm for phenylalkylsiloxane-bonded silica stationary phases can result in small changes in selectivity. The pentafluorophenylpropylsiloxane-bonded silica stationary phase (Kinetex F5) has similar separation properties to the phenylhexylsiloxane-bonded silica stationary phases, but is not selectivity equivalent. However, for method development purposes, the scope to vary separations from an octadecylsiloxane-bonded silica stationary phase (Kinetex C-18) to “phenyl phase” of the types studied here is limited for small neutral compounds. In addition, selectivity differences for the above stationary phases are enhanced by methanol–water and largely suppressed by acetonitrile–water mobile phases. For bases, larger selectivity differences are possible for the above stationary phases if electrostatic interactions are exploited, especially for acetonitrile-containing mobile phases.     

Comparison of the Separation Characteristics of the Organic–Inorganic Hybrid Stationary Phases XBridge C8 and Phenyl and XTerra Phenyl in RP-LC

Differences in the system constants of the solvation parameter model and retention factor correlation plots for varied solutes are used to study the retention mechanism on XBridge C₈, XBridge Phenyl and XTerra Phenyl stationary phases with acetonitrile–water and methanol–water mobile phases containing from 10 to 70% (v/v) organic solvent. These stationary phases are compared with XBridge C₁₈ and XBridge Shield RP₁₈ characterized in an earlier report using the same protocol. The XBridge stationary phases are all quite similar in their retention properties with larger difference in absolute retention explained by differences in cohesion and the phase ratio, mainly, and smaller changes in relative retention (selectivity) by the differences in individual system constants and their variation with mobile phase type and composition. None of the XBridge stationary phases are selectivity equivalent but XBridge C₁₈ and XBridge Shield RP₁₈ have similar separation properties, likewise so do XBridge C₈ and XBridge Phenyl, while the differences between the two groups of two stationary phases is greater than the difference within either group. The limited range of changes in selectivity is demonstrated by the high coefficient of determination (>0.98) for plots of the retention factors for varied compounds on the different XBridge phases with the same mobile phase composition.     

Insights into the Retention Mechanism on a Pentafluorophenylpropylsiloxane-Bonded Silica Stationary Phase (Discovery HS F5) in RP-LC

The solvation parameter model is used to elucidate the retention mechanism of neutral compounds on the pentafluorophenylpropylsiloxane-bonded silica stationary phase (Discovery HS F5) with methanol-water and acetonitrile-water mobile phases containing from 10 to 70% (v/v) organic solvent. The dominant factors that increase retention are solute size and electron lone pair interactions while polar interactions reduce retention. A comparison of the retention mechanism with an octadecylsiloxane-bonded silica stationary phase based on the same silica substrate and with a similar bonding density (Discovery HS C18) provides additional insights into selectivity differences for the two types of stationary phase. The methanol-water solvated pentafluorophenylpropylsiloxane-bonded silica stationary phase is more cohesive and/or has weaker dispersion interactions and is more dipolar/polarizable than the octadecylsiloxane-bonded silica stationary phase. Differences in hydrogen-bonding interactions contribute little to relative retention differences. For mobile phases containing more than 30% (v/v) acetonitrile selectivity differences for the pentafluorophenylpropylsiloxane-bonded and octadecylsiloxane-bonded silica stationary phases are no more than modest with differences in hydrogen-bond acidity of greater importance than observed for methanol-water. Below 30% (v/v) acetonitrile selectivity differences are more marked owing to incomplete wetting of the octadecylsiloxane-bonded silica stationary phase at low volume fractions of acetonitrile that are not apparent for the pentafluorophenylpropylsiloxane-bonded silica stationary phase. Steric repulsion affects a wider range of compounds on the octadecylsiloxane-bonded than pentafluorophenylpropylsiloxane-bonded silica stationary phase with methanol mobile phases resulting in additional selectivity differences than predicted by the solvation parameter model. Electrostatic interactions with weak bases were unimportant for methanol-water mobile phase compositions in contrast to acetonitrile-water where ion-exchange behavior is enhanced, especially for the pentafluorophenylpropylsiloxane-bonded silica stationary phase. The above results are compatible with a phenomenological interpretation of stationary phase conformations using the haystack, surface accessibility, and hydro-linked proton conduit models.     

羧基甜菜碱型亲水作用色谱柱的制备及性能研究

以甲基丙烯酰氧乙基二甲基乙酸铵(CBMA)为功能单体,利用表面引发原子转移自由基聚合(Surface-initiated atom transfer radical polymerization, SI-ATRP)技术,将CBMA接枝到硅胶表面,得到接枝聚合物CBMA的亲水作用色谱固定相(Silica-CBMA).通过改变SI-ATRP反应体系中单体的浓度,制备了3种不同接枝量的亲水作用色谱固定相.考察了Silica-CBMA固定相对有机酸类化合物的分离性能以及流动相中pH值、盐浓度、水含量等因素对溶质保留行为的影响.结果表明,在亲水作用色谱模式下,Silica-CBMA固定相对有机酸类化合物的分离是离子交换作用与亲水作用的混合色谱模式.流动相中盐浓度增大,溶质保留减弱,符合离子交换作用特征;固定相和溶质的离子化程度受流动相pH值影响较大,pH值增大,溶质保留增强;而溶质的保留时间随流动相水含量增加而降低则是典型的亲水作用色谱特征.使用自制Silica-CBMA柱,建立了芦丁片中维生素C、芦丁含量的亲水作用色谱测定方法,操作方法简单,为强极性样品的分离测定提供了新方法.     

System Maps for Retention of Small Neutral Compounds on a Superficially Porous Ethyl-Bridged,Octadecylsiloxane-Bonded Silica Stationary Phase in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an ethyl-bridged, ocatadecylsiloxane-bonded superficially porous silica stationary phase (Kinetex EVO C18) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not methanol–water mobile phase compositions. Compared with a superficially porous octadecylsiloxane-bonded silica stationary phase (Kinetex C18) with a similar morphology but different topology statistically significant differences in selectivity at the 95% confidence level are observed for neutral compounds that vary by size and hydrogen-bond basicity with other intermolecular interactions roughly similar. These selectivity differences are dampened with acetonitrile–water mobile phases, but are significant for methanol–water mobile phase compositions containing <30% (v/v) methanol. A comparison of a totally porous ethyl-bridged, octadecylsiloxane-bonded silica stationary phase (XBridge C18) with Kinetex EVO C18 indicated that they are effectively selectivity equivalent.     

Preparation and evaluation of n-octadecylphosphonic acid-modified magnesia-zirconia stationary phases for reversed-phase liquid chromatography

Three n-octadecylphosphonic acid-modified magnesia-zirconia reversed stationary phases (C₁₈PZM) are prepared via the strong Lewis base interactions between organophosphonate and magnesia-zirconia composite. And two of them are end-capped by using trimethylchlorosilane as end-capping agent in different procedures. Stability studies at extreme high pH conditions (pH 9-12) show that both the non-endcapped and endcapped columns are quite stable at pH 12 mobile phase. The reversed-phase liquid chromatographic behavior of three C₁₈PZM stationary phases are comparatively investigated in detail using a variety of basic compounds as probes. The retention of basic compounds on the three phases is studied over a wide range of pHs. And the possible retention mechanisms of basic compounds on the three stationary phases are discussed. The results show that the basic solutes retain by a hydrophobic and cation-exchange interaction mixed mechanism on three stationary phases when they are operated in eluents at pH values near to the pK_a of the Brönsted conjugate acid form of the analyte, suggesting that inherent zirconol groups on ZM are not expected to interact with bases via cation-exchange interaction at lower pH. Nonetheless, the non-endcapped phase differs markedly from the edncapped ones in retention and selectivity of basic solutes using eluents at pH 4.1, implying a complex retention mechanism at this pH. The cation-exchange sites under such conditions are more likely due to the adsorbed Lewis base anionic buffer constituents (acetate) on accessible ZM surface sites than the chemisorbed phosphonate. Although the three phases exhibit very similar chromatographic behavior with eluents at pH 10.1, and show in general satisfactory separation of basic compounds and alkaloids studied, the performance for a specific analyte, however, differs largely from column to column.     

HPLC retention behavior on hydride-based stationary phases

Two stationary phases attached to a silica hydride surface, cholesterol and bidentate C18, are investigated with a number of pharmaceutically related compounds in order to illustrate the various retention mechanisms that are possible for these bonded materials. The test solutes range from hydrophilic to hydrophobic based on log P (octanol/water partition coefficient) and pKa values. The mobile phases consist of acidified (formic and perchloric acid) water/methanol or water/ACN mixtures. Of particular interest are the high organic content mobile phase compositions where the retention would increase if the bonded material was operating in the aqueous normal phase (ANP) mode. Plots of retention factor (k) versus mobile phase composition are used to elucidate the retention mechanism. A number of examples are presented where solutes are retained based on RP, ANP, or dual retention mechanisms. The silica hydride-based stationary phases can also retain compounds in the organic normal phase.     

聚4-甲基-5-乙烯基噻唑键合硅胶柱的选择性研究

 较为系统地研究了聚4甲基5乙烯基噻唑键合硅胶固定相(PMVCAphase)与C18,C8及苯基柱在反相色谱中甲醇水体系下的选择性差别。结果表明,该固定相与常用反相色谱固定相有相似性,显示了一般反相色谱固定相填料的特性;另一方面,又由于其特殊结构,更多地显示了其在反相色谱上的特殊选择性。     

Retention mechanism of peptides on a stationary phase embedded with a quaternary ammonium group: A liquid chromatography study

We investigated the mechanisms involved in the retention of various peptides on a stationary phase embedded with a quaternary ammonium group (BS C23), by high-performance liquid chromatography. This was compared with peptide retention on a conventional reversed-phase C18 (RP C18) column under isocratic conditions, to understand better the various mechanisms involved. Chromatographic characterization of the two stationary phases with “model” compounds showed that BS C23 is less hydrophobic than RP C18 and induces electrostatic interaction (attraction or repulsion) with ionized compounds. If reversed-phase partitioning was the predominant retention phenomenon, for both stationary phases, the retention mechanisms in BS C23 provided different selectivity to that of RP C18. Electrostatic attraction or repulsion was clearly observed between peptides and the permanent positively charged group embedded in BS C23 depending on the pH. For most of the peptides, a weak anion-exchange mechanism was observed on the quaternary ammonium-embedded stationary phase if mobile phases at neutral pH and low ionic strengths were employed.     

Effect of large volume injection of hydrophobic solvents on the retention of less hydrophobic pharmaceutical solutes in RP-LC

Injection of large volumes of samples in solvents other than mobile phase composition has been proved for some less hydrophobic compounds. Thus, the retention behavior of several compounds of pharmaceutical interest (isosorbide-2-nitrate, isosorbide-5-nitrate, tropicamide, pentoxifylline, and methyl p-hydroxybenzoate) was studied by using different hydrophobic solvents (n-hexane, n-heptane, or i-octane) as sample solvents. Two types of stationary phases were used: octyl and octadecyl modified silica (both of Zorbax Eclipse type). The experiments showed a linear dependence between capacity factor of each solute and sample injection volume, up to maximum volume values of about 680 microL for C8 stationary phase and 580 microL for C18 stationary phase, when the solutes are no longer retained in stationary phase. Injection of large volumes of these hydrophobic solvents is thus possible in RP-LC with a gradual reduction of retention and peak efficiency. Two major conditions are however necessary in order to apply such an injection approach: the solutes must have a proper solubility in hydrophobic solvents and meanwhile they have to be less hydrophobic than the sample solvent in order to avoid competition with solvent molecules in partitioning between mobile and stationary phases.     

Laterally attached liquid crystalline polymers as stationary phases in reversed-phase high-performance liquid chromatography. V. Study of retention mechanism using linear solvation energy relationships

A linear solvation energy relationship model was used to characterize the retention behavior of a stationary phase based upon a nematic side-on liquid crystalline polymer (SOLCP) in reversed-phase liquid chromatography. The set of solutes was constituted of a high variety of compounds whose molecular sizes were considerably smaller than the mesogenic unit size. The results showed good statistical fits for these retention data in 65:35, 75:25 and 85:15 (v/v) methanol-water mobile phases. Both the cavity term and excess molar refraction are the most important favorable retention-governing parameters, whereas the solute hydrogen bond acceptor basicity is the most unfavorable retention parameter. Hydrophobicity and pi-pi interactions decrease strongly when the percentage of methanol increases, leading to an important retention decrease despite the fact that the hydrogen bond interaction weakens as the organic solvent is added. The shape recognition ability of this side-on liquid crystalline stationary phase on polycyclic aromatic hydrocarbon solutes is partly explained by the solutes' high polarizability due to the presence of pi-electrons. However, the solute polarizability is not sufficient and a stationary phase's "structure effect" must to be taken into account for the shape discrimination observed. The strong interaction between liquid crystal molecules caused likely a adsorption retention mechanism rather than a partition mechanism.     

High-performance liquid chromatography of some basic drugs on a n-octadecylphosphonic acid modified magnesia-zirconia stationary phase

The high-performance liquid chromatographic behavior of some basic drugs was studied on a n-octadecylphosphonic acid modified magnesia-zirconia (C18PZM) stationary phase. The effect of mobile phase variables such as methanol content, ionic strength, and pH on their chromatographic behavior was investigated. The retention mechanism of basic drugs on the stationary phase was elucidated. The results indicate that both hydrophobic and cation-exchange interactions contribute to solute retention under most chromatographic conditions. The inherent Br?nsted-acid sites and also the adsorbed Lewis base anionic buffer constituents on accessible ZM surface Lewis acid sites play a role in the retention of ionized solutes by cation-exchange interaction. However, especially at high mobile phase pH, the retention of basic drugs depends mainly on hydrophobic interactions between solutes and support. Separations of the basic drugs on the C18PZM phase by a predominantly reversed-phase retention mode were very promising. The mixed-mode retention feature on this phase, as a result of the adsorbed Lewis base anionic buffer constituents acting as sites for cation-exchange, could also be very useful, e.g. for enhancing the chromatographic selectivity of such analytes. The C18PZM seems to be an excellent alternative to silica-based reversed-phase stationary phase for the separation of strongly basic solutes.     

Retention properties of acetone-water mobile phases on a biphenylsiloxane-bonded silica stationary phase in reversed-phase liquid chromatography

The solvation parameter model system constants and retention factors were used to interpret retention properties of 39 calibration compounds on a biphenylsiloxane-bonded stationary phase (Kinetex biphenyl) for acetone-water binary mobile phase systems containing 30–70% v/v. Variation in system constants, phase ratios, and retention factors of acetone-water binary mobile phases systems were compared with more commonly used acetonitrile and methanol mobile phase systems. Retention properties of acetone mobile phases on a Kinetex biphenyl column were more similar to that of acetonitrile than methanol mobile phases except with respect to selectivity equivalency. Importantly, selectivity differences arising between acetone and acetonitrile systems (the lower hydrogen-bond basicity of acetone-water mobile phases and differences in hydrogen-bond acidity, cavity formation and dispersion interactions) could be exploited in reversed-phase liquid chromatography method development on a Kinetex biphenyl stationary phase.