Effect of grain size on thermal stability and oxygen storage capacity of Ce0.17Zr0.73La0.02Nd0.04Y0.04O2 solid solutions

Nanostructured CeO_2-ZrO_2 materials are an irreplaceable constituent in catalytic systems for automobile exhaust purification due to their unique oxygen storage capacity(OSC). However, traditional CeO_2-ZrO_2 materials are easy to sinter at high temperature, which causes a sharp decrease of OSC. In this paper,La~(3+) , Nd~(3+) and Y~(3+) are chosen as dopants for CeO_2-ZrO_2 to improve anti-sintering and OSC properties.The Ce_(0.17) Zr_(0.73) La_(0.02) Nd_(0.04) Y_(0.04) O_2 powders(CZLNY) were prepared by co-precipitation method. The effects of grain sizes with different mixed chlorinated solution concentrations on performances were investigated. X-ray diffraction(XRD) and transmission electron micrograph(TEM) were performed to calculate the grain sizes of CZLNY. The specific surfaces, OSC and redox properties were investigated by N_2 adsorption/desorption and temperature programmed reduction(H2-TPR). The results show that introducing La~(3+) , Nd~(3+) and Y~(3+) into CeO_2-ZrO_2 lattice can improve the stability of phase structure and anti-sintering ability. Moreover, low concentration of mixed chlorinated solution remarkably improves structural and textural properties of CZLNY. Relatively large fresh grain exhibits superior thermal stability and OSC under the condition of being calcined at 800℃ for 3 h. The specific surface and OSC are42.37 m~2/g and 333.13 mmol/g after calcining at 1000℃ for 10 h, respectively. This is owing to the low sintered driving force of large grain and long-range migration energy of large pores during the sintering process, which are beneficial to the stability of structure in CZLNY materials.     

Structure and oxygen storage capacity of Pd/Pr/CeOe-ZrO2 catalyst： effects of impregnated praseodymia

Praseodymium （Pr） was impregnated to CeO2-ZrO2 solid solution by an impregnation method. The as-obtained Pr modi- fied CeO2-ZrO2 was impregnated with 1 wt.% Pd to prepare the catalysts. The structure and reducibility of the fresh and hydrother- really aged catalysts were characterized by X-ray diffraction （XRD）, Raman, X-ray photoelectron spectroscopy （XPS）, CO chemi- sorption and H2 temperature-programmed reduction （H2-TPR）. The oxygen storage capacity （OSC） was evaluated with CO serving as probe gas. Effects of impregnated Pr on the structure and oxygen storage capacity of catalysts were investigated. The results showed that the aged Pr-impregnated samples had much higher OSC and better reducibility than the unmodified ones. The scheme of structural evolutions of the catalysts with and without Pr was also established. Partial of the impregnated Pr diffused into the bulk of CeO2-ZrO2 during ageing, which inhibited the sintering, and increased the amount of oxygen vacancies in CeO2-ZrO2 support. Furthermore, those impregnated Pr species which covered on the surface of the support obstructed the strong metal-support interaction between Pd and Ce so as to reduce the encapsulation of Pd as well as the back spill-over of the oxygen during the catalytic process.     

Performance of Pd/CeO2-ZrO2-Al2O3 catalyst for motorcycle

The Pd-only catalysts for motorcycle were prepared by impregnating CeO2-ZrO2-Al2O3 and CeO2-ZrO2+Al2O3 with PdCl2 aque-ous solution and characterized by X-ray diffraction (XRD), oxygen storage capacity (OSC) and H2-temperature-programmed reduction (H2-TPR) methods. The XRD result indicated that the CeO2-ZrO2-Al2O3 compound prepared by co-precipitation formed a single solid solu-tion and had good thermal stability, and Pd phase was not observed in all catalysts. The TPR results showed that the reduction temperature of Pd/CeO2-ZrO2-Al2O3 catalyst was lower than that of Pd/CeO2-ZrO2+Al2O3 catalyst whether they were fresh or aged catalysts. The Pd/CeO2-ZrO2-Al2O3 exhibited high three-way catalytic activity at low temperature, high thermal stability, and wide working window, sug-gesting a great potential for applications.     

Influence of MnO2 modification methods on the catalytic performance of CuO/CeO2 for NO reduction by CO

In order to investigate the influence of MnO2 modification methods on the catalytic performance of CuO/CeO2 catalyst for NO reduction by CO,two series of catalysts(xCuyMn/Ce and xCu/yMn/Ce) were prepared by co-impregnation and stepwise-impregnation methods,and characterized by means of X-ray diffraction(XRD),Raman spectra,H2-temperature programmed reduction(H2-TPR),in situ diffuse reflectance infrared Fourier transform spectra(in situ DRIFTS) techniques.Furthermore,the catalytic performances of these catalysts were evaluated by NO+CO model reaction.The obtained results indicated that:(1) The catalysts acquired by co-impregnation method exhibited stronger interaction owing to the more sufficient contact among each component of the catalysts compared with the catalysts obtained by stepwise-impregnation method,which was beneficial to the improvement of the reduction behavior;(2) The excellent reduction behavior was conducive to the formation of low valence state copper species(Cu+/Cu0) and more oxygen vacancies(especially the surface synergetic oxygen vacancies(SSOV,Cu+-□-Mn(4–x)+)) during the reaction process,which were beneficial to the adsorption of CO species and the dissociation of NO species,respectively,and further promoted the enhancement of the catalytic performance.Finally,in order to further understand the difference between the catalytic performances of these catalysts prepared by co-impregnation and stepwise-impregnation methods,a possible reaction mechanism(schematic diagram) was tentatively proposed.     

Preparation,characterization and catalytic oxidation property of CeO2/Cu2+- attapulgite (ATP) nanocomposites

Cerium oxide (CeO₂) coated on copper modified attapulgite clay nanocomoposite (CeO₂/Cu²⁺-ATP) was prepared by homogeneous deposition method. The microstructures of the as-prepared CeO₂/Cu²⁺-ATP nanocomposites were characterized by X-ray diffraction (XRD), energy-dispersive spectrometer (EDS) and transmission electron microscopy (TEM). The results indicated that CeO₂ particles with average size of about 5 nm were loaded onto the Cu²⁺-ATP and were widely dispersed. Comparing the catalytic activity of ATP/CeO₂ and CeO₂/Cu²⁺-ATP, the catalytic activity was improved when a small quantity of Cu²⁺ was introduced. The loading amount of CeO₂ and reaction temperature had important effects on decolorization ratio of methyl orange (MO). When the loading amount and reaction temperature were 70% and 338 K, respectively, the decolorization ratio of MO reached over 99%, which showed excellent catalytic activity.     

Preparation of Ce0.65Zr0.35O2 by co-precipitation： The role of hydrogen peroxide

The effect of H2O2 on the properties of Ce0.65Zr0.35O2 was explored by treating cerium nitrate and zirconium nitrate with a mixed aqueous solution of ammonia and ammonia-carbonate in the presence/absence of H2O2 . The resultant products were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption/desorption, oxygen storage capacity (OSC) and H2-temperature-programmed reduction (H2-TPR). The presence of H2O2 was found to have profound effect on powder properties such as surface area, crystallite size of the samples. It was also shown that the addition of H2O2 favored the incorporation of Zr4+ into CeO2 lattice, which facilitated the formation of CeO2-ZrO2 solid solution, and enhanced the thermal stability of the samples. OSC and H2-TPR studies indicated that the use of H2O2 enhanced the OSC and redox properties. Catalytic activity tests showed that as a support, the Ce0.65Zr0.35O2 prepared in the presence of H2O2 was more suitable for three-way catalyst. The corresponding Pd-only three-way catalyst demonstrated outstanding performance: wide air to fuel operation window, low light-off and total conversion temperature for the conversion of C3H8, NO and CO.     

Influence of Different Subsistence States of CeO2-ZrO2 Mixed Oxides in Catalyst Coating on Catalytic Properties

The metallic substrate-catalysts with different subsistence states of CeO2-ZrO2 mixed oxides were prepared and the catalytic properties were investigated. The studies on CeO2-ZrO2-V2O5-CuO mixed oxides which were prepared by coprecipitation, show that the doping of V5 and Cu2 in CeO2-ZrO2 mixed oxides can enhance the catalytic activity and thermal stability of coating materials. Moreover, different additives were doped in slurries of γ-Al2O3 to investigate the influence of additives on oxidation activity of catalysts. The mixture of ceria-zirconia, alkali metals and other rare earths acting as additives exhibits promotion effect on oxidation activity by optimizing the distribution of oxygen on the surface and in the bulk of ceria species. This mentioned mixture was mixed with γ-Al2O3 and a newly proposed active component to prepare a new catalyst. Afterward, the influence of thermal treatment on the new catalyst were investigated by calcinations at 500, 650, 750, 800, 850 and 900 ℃ for 2 h. The light-off curves of CO and HC show that after being treated at 650～750 ℃, catalysts present the best activity. XRD patterns show that ceria and zirconia species in the newly proposed active component form a phase of extra CeO2-ZrO2 mixed oxides on the surface of catalysts after the thermal treatment at 750 ℃, which has practical value for improving the preparation process and promoting the catalytic properties. Moreover, XPS results imply the existence of Ce1-xPdxO2-σ and Ce1-xPtxO2-σ on the surface of these treated samples, which may show influence on the catalytic activities.     

Hydrogen production by steam reforming of ethanol over copper doped Ni/CeO2 catalysts

High surface area CeO2 was prepared by the surfactant-assisted route and was employed as catalyst support. The 0-3 at.% Cu doped Cu-Ni/CeO2 catalysts with 10 wt.% and 15 wt.% of total metal loading were prepared by an impregnation-coprecipitation method. The influence of Cu atomic content on the catalytic performance was investigated on the steam reforming of ethanol (SRE) for H2 production and the catalysts were characterized by N2 adsorption, inductively coupled plasma (ICP), X-ray diffraction (XRD), transmission electron microscopy (TEM), temperature-programmed rerduction (TPR) and H2-pulse chemisorption techniques. The activity and products distribution behaviors of the catalysts were significantly affected by the doped Cu molar content based on the promotion effect on the dispersion of NiO particles and the interactions between Cu-Ni metal and CeO2 support. Significant increase in the ethanol conversion and hydrogen selectivity were obtained when moderate Cu metal was doped into the Ni/CeO2 catalyst. Over both of the 10Ni98.5Cu1.5/CeO2 and 15Ni98.5Cu1.5/CeO2 catalysts, more than 80% of ethanol conversion and 60% of H2 selectivity were obtained in the ethanol steam-reforming when the reaction temperature was above 450 ℃.     

One-step solution combustion synthesis of micro-nano-scale porous Cu/CeO2 with enhanced photocatalytic properties

The Cu/CeO₂ nanoporous composite material was prepared via a one-step and energy-saving method of solution combustion synthesis(SCS).The phase composition,surface morphology and optical characteristics of Cu/CeO₂ were studied.The results show that the SCS products are composed of cubic fluorite CeO₂ and Cu.Due to the generation and escape of gas during the synthetic reaction,the SCS CeO₂ shows porous structure,in which the mesopores(diameter 10-17 nm) ...     

MCM-41 supported nano-sized CuO-CeO_2 for catalytic combustion of chlorobenzene

In this paper,MCM-41 was synthesized by a soft template technique and MCM-41 supported CuO-CeO_2 nano-sized catalysts with different Cu/Ce molar ratios were prepared by a deposition-precipitation method.N_2 adsorption,HRTEM-EDS,H_2-TPR,XPS characterization,as well as catalytic activity and durability tests for the catalytic combustion of chlorobenzene(CB) were conducted to explore the relationship between the structure and catalytic performance of the catalysts.It is revealed that cuCe(6:1)/MCM-41 has the highest activity and can completely catalyze the degradation of CB at 260℃.The reasons for the high activity of the catalysts are as follows:MCM-41,a type of mesoporous material which has large pore size and large specific surface area,is suitable as a catalyst carrier.The average diameter of nano-sized CuO and CeO_2 particles is about 3-5 nm and adding CeO_2 improves the dispersion of active component CuO,which are highly and evenly dispersed on the surface of MCM-41.Characterization results also explain why MCM-41 supported CuO-CeO_2 with appropriate proportion can highly enhance the catalytic activity.The reason is that CeO_2 acting as an oxygen-rich material can improve the mobility of oxygen species through continuous redox between Ce~(4+)and Ce~(3+),and improve the catalytic performance of CuO for CB combustion.Besides,CuCe(6:1)/MCM-41 also displays good durability for CB combustion,both in the humid condition and in the presence of benzene,making it a promising catalytic material for the elimination of chlorinated VOCs.     

Effects of precursor moisture and inert N_2 atmosphere calcinations on structure and properties of alumina modified CeZrLaNd mixed oxides

CeO_2-ZrO_2 mixed oxides are widely used in the three-way catalysts due to their unique reversible oxygen storage and release capacity. Large surface area, high oxygen storage capacity and good thermal stability of cerium zirconium mixed oxides are the key properties for the automotive catalysts so as to meet the strict emission regulations. In this work, alumina modified CeZrLaNd mixed oxides were prepared by a co-precipitation method. The effects of moisture in precursor and inert N2 atmosphere during calcinations on the structure and properties were investigated by Brunauer-Emmett-Teller(BET) surface area measurements, X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), hydrogen temperature-programmed reduction(H_2-TPR), oxygen storage capacity(OSC), Raman spectroscopy, and X-ray photoelectron spectroscopy(XPS). The results show that the moisture in precursor during calcinations increases the crystal grain size of the cerium zirconium mixed oxides, improving the thermal stability. And the aged surface area of sample after being calcined at1000 ℃ for 4 h reaches 68.8 m~2/g(5.7% increase compared with the common sample). The inert N2 atmosphere endows a great pore-enlarging effect, which leads to high fresh surface area of 148.9 m2/g(13.5% increase compared with the common sample) and big pore volume of 0.5705 mL/g. The redox and oxygen storage capacity are also improved by inert N2 atmosphere with high OSC value of 241.06μmolO_2/g(41.3% increase compared with the common calcination), due to the abundant formation of the crystal defects and oxygen vacancies.     

Constructing a high concentration CuO/CeO2 interface for complete oxidation of toluene: The fantastic application of spatial confinement strategy

In this paper,CeO₂ substrate was prepared by the sol-gel method,further CuO was introduced by adding the copper complexes with chelating agents into the sol-gel precursors of CeO₂,in which different chelating agents(β-cyclodextrin,glucose and trimesic acid) were tried.This synthesis method helps the CuO species to disperse very uniformly in the CeO₂ substrates.When the amount of copper oxide is up to33 mol%,the CuO/CeO₂ samples can still maintain a hig...     

Preparation and reaction mechanism of novel CexCoyCuz oxide composite catalysts towards oxidation of o-xylene

Ce_xCo_yCu_z oxide composite catalysts were prepared by using polyethylene glycol, citrate sol–gel method combined with PMMA template for the oxidation of o-xylene. The catalysts were characterized by the X-ray diffraction (XRD), H₂-temperature programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR), etc. The catalytic activity for o-xylene was investigated. The catalytic degradation pathway and mechanism of o-xylene were inferred. The results show that CeO₂ is mainly present on the surface of all catalysts. The surface area of Ce₂Co₁Cu₁ is up to 77.2 m²/g, and the average pore size is 10.62 nm. It exhibits redox and sufficient Ce⁴⁺ and Ce³⁺, and reactive oxygen species, and has maximum O–H and CO in the five catalyst samples. The catalytic activity of Ce₂Co₁Cu₁ is the best at low temperature, with the T₅₀ and T₉₀ values of 235 and 258 °C at a space velocity of 32000 h^?1, respectively. The o-xylene is oxidized to o-methyl benzaldehyde, and then further oxidized to o-methylbenzoic acid, and finally CO₂ and H₂O are formed.     

Promotional effect of CO pretreatment on CuO/CeO2 catalyst for catalytic reduction of NO by CO

The CuO/CeO2 catalysts were investigated by means of X-ray diffraction(XRD),laser Raman spectroscopy(LRS),X-ray photoelectronic spectroscopy(XPS),temperature-programmed reduction(TPR),in situ Fourier transform infrared spectroscopy(FTIR) and NO+CO reaction.The results revealed that the low temperature(150 °C) catalytic performances were enhanced for CO pretreated samples.During CO pretreatment,the surface Cu+/Cu0 and oxygen vacancies on ceria surface were present.The low valence copper species activated the adsorbed CO and surface oxygen vacancies facilitated the NO dissociation.These effects in turn led to higher activities of CuO/CeO2 for NO reduction.The current study provided helpful understandings of active sites and reaction mechanism in NO+CO reaction.     

Effects of precipitate aging time on the cerium-zirconium composite oxides

Cerium-zirconium composite oxides with high performance were synthesized by a co-precipitation method, using zirconium oxychloride and rare earth chloride as raw materials. The effects of precipitate aging time on the properties of cerium-zirconium composite oxides were investigated. The prepared cerium-zirconium composite oxides were characterized by X-ray diffraction（XRD）, BET specific surface area, pulsed oxygen chemical adsorption, H2 temperature-programmed-reduction（H2-TPR）, scanning electron microscopy（SEM）, etc. The results showed that the precipitate aging time caused great effects on the properties of cerium zirconium composite oxides. With the increase of aging time, the cerium zirconium composite oxides showed enhanced specific surface area, good thermal stability, and high oxygen storage capacity（OSC）. The best performance sample was obtained while the precipitate aging time up to 48 h, with the specific surface area of 140.7 m2/g, and OSC of 657.24 μmolO2/g for the fresh sample. Even after thermal aged under 1000 oC for 4 h, the aged specific surface area was 41.6 m2/g, moreover with a good OSC of 569.9 μmolO2/g.     

Fabrication of wide temperature lanthanum and cerium doped Cu/TNU-9 catalyst with excellent NH3-SCR performance and outstanding SO2+H2O tolerance

The effects of La on the catalytic performance,SO₂ and H2O resistance of Cu-Ce/TNU-9 catalyst were studied in the selective catalytic reduction of NO_x via ammonia(NH₃-SCR).The results show that the La doped Ce-Cu/TNU-9(CCL/T9) catalyst exhibits better SCR performance than Ce-Cu/TNU-9(CC/T9) and Cu/TNU-9(C/T9) in the wide temperature window(200-450 ℃) due to La benefiting from enhancing Cu⁺+Ce⁴⁺?Cu²⁺-+Ce³⁺ to facilitate ...     

Effect of CuO species and oxygen vacancies over CuO/CeO2 catalysts on low-temperature oxidation of ethyl acetate

The catalytic oxidation of ethyl acetate(EA) was studied over CuO/CeO₂ catalysts which were prepared by ball milling with different precursors(copper oxide,cerium acetate,cerium dioxide,copper acetate and cerium hydroxide).The CuO/CeO₂ catalyst(O-A) prepared with copper oxide and cerium acetate as precursors shows very high catalytic activity that 100% EA conversion is achieved at low temperature of 220℃.It is found that specific surface area(112.8 m²/g),particle...     

Effect of BaO on catalytic performance of Pd-based catalysts for purification of gasoline-methanol exhaust

Barium oxide was developed successfully to modify palladium catalysts supported on CeO2-ZrO2-La2O3-Al2O3（CZLA） compound oxides by impregnation method. N2 adsorption（BET）, X-ray diffraction（XRD）, H2-temperature-programmed reduction（H2-TPR） and X-ray photoelectron spectroscopy（XPS） were employed to characterize the influence of BaO on the physicochemical properties of catalyst. And catalytic activity tests for methanol, CO, C3H8 and NO conversion were evaluated. Catalytic activity results showed that BaO had a positive effect on the conversion of all pollutants. H2-TPR results suggested that the addition of BaO increased the reductive ability of the palladium catalysts. The XPS results indicated that doping BaO also improved the dispersion of Pd species and increased the amounts of Ce3＋ on the Pd-Ba/CZLA catalyst surface, which led to a better redox property. The excellent redox property helped to improve the catalytic activities toward all the pollutants over Pd-based catalysts.     

Effect of preparation method on MnOx-CeO2 catalysts for NO oxidation

The NO oxidation reaction was studied over MnO_x-CeO₂ catalysts prepared by co-precipitation, impregnation and mechanical mixing method, respectively. It was found that the co-precipitation was the most active and a 60% NO conversion was achieved at 250 °C. X-ray diffraction (XRD), Brumauer-Emmett (BET), H₂-temperature programmed reduction (H₂-TPR) and oxygen storage capacity (OSC) techniques were employed to characterize the physical and chemical properties of the catalysts. XRD results showed that amorphous MnO_x or Mn-O-Ce solid solution existed in co-precipitation and impregnation prepared sample, while crystalline MnO_x was found in mechanical mixing catalyst. A larger surface area was observed on co-precipitation prepared catalyst compared to those prepared by impregnation and mechanical mixing. The strong interaction between MnO_x and CeO₂ enhanced the reducibility of the oxides and increased the amount of Mn⁴⁺ and activated oxygen, which are favorable for NO oxidation to NO₂.     

Synergistic effects of CeO2/Cu2O on CO catalytic oxidation: Electronic interaction and oxygen defect

For CO catalytic oxidation, Cu and Ce species are of great importance, between which the synergistic effect is worth investigating. In this work, CeO₂/Cu₂O with Cu₂O {111} and {100} planes were comparatively explored on CO catalytic oxidation to reveal the effects of interfacial electronic interactions and oxygen defects. The activity result demonstrates that CeO₂/o-Cu₂O {111} has superior performance compared with CeO₂/c-Cu₂O {100}. Credit to the coordination unsaturated copper atoms (Cu_CUS) on o-Cu₂O {111} surface, the interfacial electronic interactions on CeO₂/o-Cu₂O {111} are more obvious than those on CeO₂/c-Cu₂O {100}, leading to richer oxygen defect generation, better redox and activation abilities of CO and O₂ reactants. Furthermore, the reaction mechanism of CeO₂/o-Cu₂O {111} on CO oxidation is revealed, i.e., CO and O₂ are adsorbed on the Cu_CUS on Cu₂O {111} and oxygen defect of CeO₂, respectively, and then synergistically promote the CO oxidation to CO₂. The work sheds light on the designing optimized ceria and copper-based catalysts and the mechanism of CO oxidation.