The vibrational spectra of maleimide and N-D maleimide

The infrared spectra of maleimide as a vapour (160°C), melt (100°C), oriented polycrystalline film, pellet and when dissolved in various solvents were recorded between 4000 and 400 cm^?1. Also certain spectra in the far infrared region 400-40 cm^?1 were obtained. Raman spectra of the crystalline solid, melt and as a saturated solution in acetonitrile were recorded and semiquantitative polarization measurements carried out. For N-D maleimide infrared and Raman spectra of the solid compound were recorded.The fundamental frequencies have been assigned in terms of C_2v, symmetry on the basis of infrared vapour contours and dichroism of the oriented film as well as on Raman polarization data. A force field was derived for maleimide, by initially transferring force constants from maleic anhydride and subsequent refinement of the force constants. The agreement between observed and calculated frequencies for the in-plane modes was satisfactory whereas certain large discrepancies remained for the out-of-plane vibrations.     

Vibrational spectra and a potential function for 3-chlorocyclopropene and its various deuterated modifications

I.r. and Raman spectra have been obtained for 3-chlorocyclopropene and 3-chlorocyclopropene-d₃ under a variety of experimental conditions. For mixtures of the two d₂ isotopic species and of the two d₂ isotopic species, only infrared spectra have been recorded. The pattern of gas-to-condensed-phase frequency shifts is interpreted as evidence of hydrogen bonding for the CH hydrogen atoms. A complete assignment of the vibrational fundamentals for the d₀ and d₃ species is derived from the spectra. For the d₀ species these frequencies (in cm⁻¹) are: (a′) 3171, 3029, 1633, 1266, 1141, 913, 713, 591, 345; (a″) 3140, 1034, 1017, 866, 840, 349. With guidance from normal coordinate calculations 59 of the 60 fundamentals for the d₁ and d₂ species are assigned. The full set of 89 observed frequencies has been used to fit an 18-parameter valence-type potential function. In comparison with the force constants for CC and CC stretching of cyclopropene and 3,3-difluorocyclopropene, the CC force constants of 3-chlorocyclopropene show changes similar to those expected for a substitution of a single fluorine atom. This finding is consistent with a σ-acceptor role for the mechanism of the interaction of fluorine and chlorine atoms with the cyclopropene ring system.     

Theoretical study on the structures,force field,and vibrational spectra of cyclooctatetraene and cyclooctatetraene-d8

The structures and force field of 1,3,5,7-cyclooctatetraene (COT) have been studied using ab initio theory at the SCF level with the 4-21G basis set. The quadratic force field of the D_2d structure obtained by systematic scaling of the ab initio force constants successfully reproduces the observed frequencies of COT and COT-d₈ with a mean deviation of less than 10 cm⁻¹ for non-CH stretching modes. On the basis of the calculated results, assignments of the fundamental vibrations are examined. The normal mode υ₅ is reassigned to a weak band at 758 cm⁻¹ in the Raman spectrum of COT and to a weak band at 591 cm⁻¹ in the Raman spectrum of COT-d₈. The calculations favor the assignment of υ₂₆ given by Lippincott et al. [J. Am. Chem. Soc. 73, 3370 (1951)] over the revised assignment of Perec [Spectrochim. Acta 47A, 799 (1991)]. The calculations also furnish reliable prediction for the inactive A₂ fundamentals of COT and COT-d₈. The fundamental frequencies and IR and Raman intensities of ¹³CC₇H₈, which constitutes about 9% of COT in natural abundance, are also calculated. Only ν₁₀ (calculated at 908 cm⁻¹) of the formal inactive A₂ modes has appreciable Raman intensity (0.23 Å⁴/amu). A spectral feature due to this fundametal is identified in the liquid Raman spectrum of Tabacik and Blaise [C. R. Acad. Sci. Ser. II 303, 539 (1986)] as a weak peak at 908 cm⁻¹.     

Infrared and Raman spectra and normal coordinate analysis of trans-1,2-dicyanocyclopropane and its deuterated isotopomers

Infrared and Raman spectra are presented for trans-1,2-dicyanocyclopropane and its 1,2-d₂- and 3,3-d₂-isotopomers. Most of the d₀ assignments agree with previous assignments of Strumpf and Dunker encompassing 26 of the 27 fundamentals. The 1,2-d₂ assignments are similar, but for the 3,3-d₂ species only 11 bands could be assigned. A complete ab initio quantum mechanical force field has been calculated for this molecule at the 6-31G* basis set level. This force-field was scaled and least-squares optimized using eight parameters for functionally related diagonal force constants and their geometric mean for off-diagonals. Both theoretical minimum energy and “experimentally corrected” geometries were used with no significant difference in results. An earlier calculation with a 4-31G basis set gave a similar frequency fit but different scaling factors. As an alternative approach, the scaled ab initio force field, was also used as a starting point for a more conventional refinement of 27 force constants which had a significant influence on the potential energy distribution. The remainder were fixed at the scaled ab initio values. This empirical force field resulted in a fit to 65 fundamentals of d₀, 1,2-d₂ and 3,3-d₂ to < 1% average error.     

The vibrational spectra of N-Cl maleimide

The infrared spectra of N-Cl maleimide as a Nujol mull and dissolved in various solvents were recorded between 4000 and 30 cm^?1. Raman spectra of the crystalline solid and saturated solution in CH₃CN were recorded and semiquantitative polarization measurements were made.The fundamental frequencies have been tentatively assigned in terms of C_2V symmetry, based upon Raman polarization data and analogies with the spectra of maleimide and maleic anhydride. A force field was derived by initially transferring force constants from maleimide. After small iterations a satisfactory correspondance was achieved between the observed and calculated in-plane modes whereas larger discrepancies remained for some of the out-of-plane vibrations.     

In-plane vibrational modes of cytosine from an ab initio MO calculation

Harmonic force constants, in-plane vibrational frequencies, and in-plane vibrational modes of cytosine were calculated by an ab initio Hartree—Fock SCF MO method. The force contants were calculated by the use of an energy gardient method with the STO-3G basis set, and then they were corrected into “4-31G force constants” by the scaling factors given by us previously for the case of uracil. The corrected set of force constants can produce a calculated vibrational spectra of cytosine and cytosine-1,amino-d₃, that can be well corrected with the observed Raman and infrared spectra of these compounds, with little ambiguity. Thus, the assignments of all the in-plane vibrations are now practically established. The calculated vibrational modes, in addition, can account for the recently published resonance Raman effects of cytosine residue.     

Spectra and Structure of Silicon-Containing Compounds. XXVIII1 Infrared and Raman Spectra,Vibrational Assignment,and Ab Initio Calculations of Vibrational Spectrum and Structural Parameters of Vinyltrichlorosilane

The infrared spectra (3200-50 cm^–1) of gaseous and solid vinyltrichlorosilane, CH₂=CH-SiCl₃, have been recorded. In addition, the Raman spectrum (3200-10 cm^–1) of the liquid has been recorded and quantitative depolarization values obtained. The infrared spectrum of the sample dissolved in liquid xenon (–80°C) has also been recorded. Using the experimental data and normal coordinate calculations with scaled ab initio force constants, the complete vibrational assignment is proposed. The torsional mode was observed in the infrared spectrum of the gas at 69 cm^–1 and the threefold barrier of internal rotation was calculated to be 500 cm^–1 (5.98 kJ/mol). Ab initio calculations have been carried out at the restricted Hartree–Fock level of the theory as well as with full electron correlation by the perturbation method to second order with different basis sets up to 6-311+G(d,p) to obtain the optimized geometries, harmonic force constants, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies. The ab initio predicted structural parameters are compared with those obtained from a previous electron diffraction study.     

Vibrational spectra of 1,3-dideuterioallene and normal mode calculations for allene

Infrared and Raman spectra of 1,3-d₂-allene were measured and fundamental frequencies were assigned. The frequencies were used with previously published data for the d₀, d₄, d₁ and 1,1,-d₂ isotopomers of allene in force field calculations. A new ab initio quantum mechanical force field calculated at the 6-31G** level was scaled to fit the anharmonic fundamental frequencies and used to provide some of the interaction constants for a second, conventionally refined force field.     

Investigation of Raman and infrared phonon modes in case of barium bismuth tantalate (BaBi2Ta2O9)

The Raman and the infrared wavenumbers in the Aurivillius structure BaBi₂Ta₂O₉ (BBT) having space group I4/mmm (no. 139-D_4h¹⁷) are investigated using normal coordinate analysis. The calculation of zone center phonons incorporates seven stretching and seven bending force constants. The Raman and the infrared frequencies for BBT have been assigned for the first time in I4/mmm phase. The calculated Raman and infrared wavenumbers are in very good agreement with the observed ones. The potential energy distributions (PED) are also investigated for each normal mode in BBT and the contributions of different force constants to various frequencies are determined.     

Vibrational spectra and normal coordinate analysis of isotactic poly(alkyl ethylene)s II. Modification I of poly(propyl ethylene) and its deuterated derivatives

The vibrational analysis of modification I of poly(propyl ethylene), poly(propyl ethylene)-(2,2;d₂), and poly(propyl ethylene)-(1,2,2;d₃) has been performed using the valence force field derived for poly(ethyl ethylene) and the actual molecular geometry. The band assignments are based on infrared polarization and Raman data.     

A DFT analysis of the vibrational spectra of nitrobenzene

Raman and FTIR, spectra of nitrobenzene, nb, and its isotopomers, nb-¹⁵N, nb-¹³C₆ and nb-d₅, were obtained and the fundamental vibrational modes assigned with the aid of a B3LYP/6-311+G** calculation, without the need for scaling of the force constants. The changes in vibrational coupling between the nitro and benzene groups upon certain isotopic substitutions are well modelled by the calculation, which is able to reproduce the isotopic shifts in frequencies for the nitro vibrations, as well as changes in IR intensities.     

Bildung siliciumorganischer verbindungen: 52. Das schwingungsspektrum von 1,3,5,7-tetramethyl-tetrasilaadamantan

The infrared and Raman spectra of 1,3,5,7-tetramethyltetrasilaadamantan, Si₄C₁₀H₂₄, have been recorded over the ranges 4000–4200 and 1500–1550 cm^?1 respectively. The fundamentals can be assigned completely on the basis of T_d-symmetry. An approximate normal coordinate analysis has been performed, including three A₁, four E and nine F₂ frequencies. The resulting force constants are in complete agreement with the literature data reported for SiC compounds.     

Vibrational spectra and normal coordinate analysis of isotactic poly(alkyl ethylene)s. I. Modification I of poly(ethyl ethylene) and its deuterated derivatives

A new calculation of the vibrational frequencies of poly(ethy1 ethylene) based on the actual molecular geometry was performed. The calculation takes into account new experimental data such far-infrared spectra and Raman spectra of the stretched polymer, infrared spectra of poly(ethyl ethylene)-(2,2;d₂) (P-4-1-d₂) and poly(ethyl ethylene)-(3,3,4,4;d₄) (P-4-1-d₄), and Raman spectra of poly(ethyl ethylene)-(1,3,3;d₃) and poly(ethyl ethylene)-(3,3,4,4;d₄). Refinement produced a set of force constants; it is also applicable to poly(propyl ethylene).     

On the geometry and internal rotation of XSCF3 compounds (X = F,Cl and CF3)

The molecular structures (r_α⁰ values) for XSCF₃ with X = F, Cl and CF₃ have been determined by electron diffraction of gases. While the geometry (C-F bond length and FCF angle) of the CF₃ groups and the bond angle at the sulfur atom depend very little on the substituent X, the S-C bond length increases with decreasing electronegativity of X from 1.805 (3) Å for X = F to 1.824 (6) Å for X = Cl. Torsional force constants for the CF₃ groups were derived from vibrational amplitudes. A strong increase of this force constant is observed between FSCF₃ (f_τ = 0.09 (2) mdyn Å) and CISCF₃ (f_τ = 0.18 (5) mdyn Å). The torsional frequencies derived from the electron diffraction experiment agree very well with the values observed in the far IR spectra for CISCF₃, and CF₃SCF₃. A force field for CF₃SCF₃ has been derived from IR and Raman data.     

A vibrational molecular force field of model compounds with biological interest—III. Harmonic dynamics of α- and β-d-galactose in the crystalline state

The infrared spectra of α- and β-d-galactose were recorded, both in the mid-IR range (4000-500 cm⁻¹) and in the far-IR (500-50 cm⁻¹). The Raman spectra were also obtained. These spectra constitute the basis of a crystalline-state force field established for these two molecules through a normal coordinate analysis. A modified Urey—Bradley—Shimanouchi force field was combined with an intermolecular potential energy function which includes van der Waals interactions, electrostatic terms and an explicit hydrogen bond function. The force constants were varied, so as to obtain an agreement between the observed vibrational frequencies and the calculated ones of α-d-galactose. The force field obtained was then applied to α-d-galactose O-d5 and β-d-galactose, in order to test its transferability. The computed potential energy distribution was found to be compatible with previous assignments for d-glucose, particularly for the modes involving C6 and COH groups. For β-d-galactose the same force field was used with changing the force constants due to the C1 and C6 groups.     

Spectra and Structures of Silicon-Containing Compounds. XXIV.* Raman and Infrared Spectra,r 0 Structural Parameters,Vibrational Assignment,Barriers to Internal Rotation,and Ab Initio Calculations of Ethylsilane

The infrared (3200 to 400 cm^–1) and Raman (3200 to 20 cm^–1) spectra of gaseous and solid ethylsilane, CH₃CH₂SiH₃, have been recorded. Additionally, the Raman spectrum of the liquid has been obtained with quantitative depolarization values. The SiH₃ torsional mode has been observed as sum and difference bands with the silicon-hydrogen stretching vibration. Utilizing the torsional fundamental frequency of 132 cm^–1 the threefold periodic barrier of 590 cm^–1 (7.06 kJ/mol) has been obtained. Utilizing the frequencies of the silicon-hydrogen stretches, Si-H bond distances of 1.485 and 1.484 Å have been obtained for the bonds gauche and trans to the methyl group, respectively. Using previously reported rotational constants from seven different isotopomers, the r ₀ parameters have been calculated and are compared to the corresponding r _s parameters. A complete vibrational assignment is proposed that is consistent with the predicted frequencies utilizing the force constants from ab initio MP2/6-31G(d) calculations. Both the infrared intensities as well as the Raman activities and depolarization values have been obtained from the ab initio calculations. Complete equilibrium geometries have been determined by ab initio calculations employing the 6-31G(d), 6-311 + G(d,p), and 6-311+G(2d,2p) basis sets at levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. The results are discussed and the theoretical values are compared to the experimental values when appropriate.     

Vibronic spectra and normal coordinate analysis of substituted anilines—I. 2,3-, 2,4-, and 2,5-dimethylanilines

Vibronic spectra of 2,3-, 2,4-, and 2,5-dimethylanilines (DMA) have been recorded in the vapor phase and analysed primarily for ascertaining the frequencies of certain low lying fundamentals (< 1000 cm⁻¹) which were observed earlier in infrared and Raman spectra with rather poor intensities. In most cases, the investigation of vibronic spectra has supported the data observed in infrared and Raman spectra. However, a new frequency has been observed at ∼120 cm⁻¹ in each molecule and has been assigned to the CNH₂ out-of-plane wag. A detailed analysis of the vibronic spectra of these three molecules revealed that an interaction-induced blue-shift of nearly 1700 cm⁻¹ is caused in the (0, 0) band of all the three DMAs due to an electrostatic interaction between the NH₂ and CH₃ groups.The normal coordinate analyses (NCA) of the above three molecules have been carried out using a general valence force field (GVFF) with 21 principal and 30 interaction force constants, assuming an averaged structure, a planar geometry, and a C_s symmetry in each case. The fundamental frequencies were mostly taken from an earlier work reported from this laboratory. Some frequencies were also picked up from the investigation of the vibronic spectra reported herein. The force field calculations were carried out using the least-squares iterative technique. During final calculations, all the 51 force constants were allowed to iterate simultaneously, which reproduced the 52 experimentally observed fundamentals out of the 54 (35a′+ 19a″) expected ones within an average error of ± 1.0% with a reasonable potential energy distribution (PED) among the various normal modes.     

Matrix isolation laser Raman spectroscopy: a Raman and infrared spectral study including Raman polarisation data for the co-condensation reaction of Pd: Spectroscopic and structural data for the new tetra-carbonyls Pd(CO)4 AND Pt(CO)4

The chemical species formed in the co-condensation reactions of Pd and Pt atoms with CO at 4.2–10 °K are investigated for the first time using the combined techniques of matrix isolation infrared and laser Raman spectroscopy. Under these experimental conditions the spectroscopic data show that one major product is formed. The data when taken in conjunction with the depolarisation measurements for the matrix isolated species confirms the existence in the matrix of the previously unknown tetracarbonyls Pd(CO)₄ and Pt(CO)₄ both having T_d symmetry. Cotton-Kraihanzel force constants are calculated for the series M(CO)₄ where M = Ni, Pd and Pt.     

Infrared and Raman spectra, conformational stability and vibrational assignment of 1-chloro-1-silacyclopentane

Infrared and Raman spectra (3500-60 cm⁻¹) of gas and/or liquid and solid 1-chloro-1-silacyclopentane (c-C₄H₈SiClH) have been recorded and the vibrational data indicate the presence of a single conformer with no symmetry which is consistent with the twisted form. Ab initio calculations with a variety of basis sets up to MP2(full)/aug-cc-pVTZ predict the envelope-axial and envelope-equatorial conformers are saddle points with nearly the same energies but much lower in energy than the planar conformer. Density functional theory calculations by the B3LYP method predicts slightly lower energies for the two envelope forms and considerably lower for the planar form. By utilizing the MP2(full)/6-31G(d) calculations the force constants, frequencies, infrared intensities, band contours, Raman activities, and depolarization values have been obtained to support the vibrational assignment. Estimated r₀ structural parameters have been obtained from adjusted MP2(full)/6-311 + G(d, p) calculations. These experimental and theoretical results are compared to the corresponding quantities of some other five-membered rings.